Hallo,
nachdem ich wieder mit der grafischen Oberfläche arbeiten kann, kann ich mich jetzt um mein Scannerproblem kümmern.
Ich versuche einen Epson Perfection 3170 Photo unter Suse 9.1 Prof. (Kernel 2.6, Sane-Version 1.0.15, USB-Anschluss) zu installieren. Da ich nicht den alten Canonscanner gelöscht habe, ist nun die Auswahlliste leer und ich kann den neuen Scanner nicht manuell konfigurieren.
Ich habe im Forum etwas gesucht, habe für mein Problem keine Lösung finden können. Der Befehl 'sane-find-scanner' erbrachte folgende Meldung:
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8, product=0x0116) at libusb:001:007
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
Der Befehl 'scanimage -L' als Benutzer diese:
No scanners were identified. ...usw
Als root:
device `epson:libusb:001:007' is a Epson flatbed scanner
Meine dll.conf unter etc/sane.d lautet folgendermaßen:
# enable the next line if you want to allow access through the network:
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
#canon_pp
coolscan
coolscan2
#dc25
#dc210
#dc240
dmc
epson
fujitsu
#gphoto2
gt68xx
hp
hpsj5s
hp5400
ibm
leo
ma1509
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
nec
niash
pie
pint
plustek
#plustek_pp
#pnm
qcam
ricoh
s9036
sceptre
sharp
sm3600
snapscan
sp15c
#st400
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
#
# The following backends are not included in the sane-backends distribution
# If you want to use them, download them from their webpages and read their
# documentation
#
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
Der Befehl 'export SANE_DEBUG_GT68XX=255 ; scanimage > /dev/null' ergibt folgendes Resultat:
[sanei_debug] Setting debug level of gt68xx to 255.
[gt68xx] SANE GT68xx backend version 1.0 build 66 from sane-backends 1.0.15
[gt68xx] sane_init: authorize != null
[gt68xx] sane_init: debug options are enabled, handle with care
[gt68xx] sane_init: little endian machine
[gt68xx] sane_init: reading config file `gt68xx.conf'
[gt68xx] sane_init: config file line 1: ignoring empty line
[gt68xx] sane_init: config file line 2: ignoring comment line
[gt68xx] sane_init: config file line 3: ignoring comment line
[gt68xx] sane_init: config file line 4: ignoring empty line
[gt68xx] sane_init: config file line 5: ignoring comment line
[gt68xx] sane_init: config file line 6: ignoring comment line
[gt68xx] sane_init: config file line 7: ignoring comment line
[gt68xx] sane_init: config file line 8: ignoring comment line
[gt68xx] sane_init: config file line 9: ignoring empty line
[gt68xx] sane_init: config file line 10: ignoring comment line
[gt68xx] sane_init: config file line 11: ignoring comment line
[gt68xx] sane_init: config file line 12: ignoring comment line
[gt68xx] sane_init: config file line 13: ignoring comment line
[gt68xx] sane_init: config file line 14: ignoring comment line
[gt68xx] sane_init: config file line 15: ignoring empty line
[gt68xx] sane_init: config file line 16: ignoring comment line
[gt68xx] sane_init: config file line 17: ignoring comment line
[gt68xx] sane_init: config file line 18: ignoring comment line
[gt68xx] sane_init: config file line 19: ignoring empty line
[gt68xx] sane_init: config file line 20: ignoring comment line
[gt68xx] sane_init: config file line 21: ignoring comment line
[gt68xx] sane_init: config file line 22: ignoring comment line
[gt68xx] sane_init: config file line 23: trying to attach `usb 0x05d8 0x4002'
[gt68xx] sane_init: config file line 24: ignoring empty line
[gt68xx] sane_init: config file line 25: ignoring comment line
[gt68xx] sane_init: config file line 26: ignoring empty line
[gt68xx] sane_init: config file line 27: ignoring comment line
[gt68xx] sane_init: config file line 28: ignoring comment line
[gt68xx] sane_init: config file line 29: ignoring empty line
[gt68xx] sane_init: config file line 30: ignoring comment line
[gt68xx] sane_init: config file line 31: ignoring comment line
[gt68xx] sane_init: config file line 32: ignoring comment line
[gt68xx] sane_init: config file line 33: ignoring comment line
[gt68xx] sane_init: config file line 34: ignoring empty line
[gt68xx] sane_init: config file line 35: ignoring comment line
[gt68xx] sane_init: config file line 36: ignoring comment line
[gt68xx] sane_init: config file line 37: ignoring comment line
[gt68xx] sane_init: config file line 38: ignoring comment line
[gt68xx] sane_init: config file line 39: ignoring empty line
[gt68xx] sane_init: config file line 40: ignoring comment line
[gt68xx] sane_init: config file line 41: ignoring comment line
[gt68xx] sane_init: config file line 42: ignoring empty line
[gt68xx] sane_init: config file line 43: ignoring comment line
[gt68xx] sane_init: config file line 44: ignoring comment line
[gt68xx] sane_init: config file line 45: ignoring comment line
[gt68xx] sane_init: config file line 46: ignoring empty line
[gt68xx] sane_init: config file line 47: ignoring comment line
[gt68xx] sane_init: config file line 48: ignoring comment line
[gt68xx] sane_init: config file line 49: ignoring comment line
[gt68xx] sane_init: config file line 50: ignoring comment line
[gt68xx] sane_init: config file line 51: ignoring empty line
[gt68xx] sane_init: config file line 52: ignoring comment line
[gt68xx] sane_init: config file line 53: ignoring comment line
[gt68xx] sane_init: config file line 54: ignoring comment line
[gt68xx] sane_init: config file line 55: ignoring comment line
[gt68xx] sane_init: config file line 56: ignoring empty line
[gt68xx] sane_init: config file line 57: ignoring comment line
[gt68xx] sane_init: config file line 58: ignoring comment line
[gt68xx] sane_init: config file line 59: ignoring comment line
[gt68xx] sane_init: config file line 60: ignoring comment line
[gt68xx] sane_init: config file line 61: ignoring empty line
[gt68xx] sane_init: config file line 62: ignoring comment line
[gt68xx] sane_init: config file line 63: ignoring comment line
[gt68xx] sane_init: config file line 64: ignoring comment line
[gt68xx] sane_init: config file line 65: ignoring comment line
[gt68xx] sane_init: config file line 66: ignoring empty line
[gt68xx] sane_init: config file line 67: ignoring comment line
[gt68xx] sane_init: config file line 68: ignoring comment line
[gt68xx] sane_init: config file line 69: ignoring empty line
[gt68xx] sane_init: config file line 70: ignoring comment line
[gt68xx] sane_init: config file line 71: ignoring comment line
[gt68xx] sane_init: config file line 72: ignoring comment line
[gt68xx] sane_init: config file line 73: ignoring comment line
[gt68xx] sane_init: config file line 74: ignoring empty line
[gt68xx] sane_init: config file line 75: ignoring comment line
[gt68xx] sane_init: config file line 76: ignoring comment line
[gt68xx] sane_init: config file line 77: trying to attach `usb 0x055f 0x021e'
[gt68xx] sane_init: config file line 78: ignoring empty line
[gt68xx] sane_init: config file line 79: ignoring comment line
[gt68xx] sane_init: config file line 80: ignoring empty line
[gt68xx] sane_init: config file line 81: ignoring comment line
[gt68xx] sane_init: config file line 82: ignoring comment line
[gt68xx] sane_init: config file line 83: ignoring empty line
[gt68xx] sane_init: config file line 84: ignoring comment line
[gt68xx] sane_init: config file line 85: ignoring comment line
[gt68xx] sane_init: config file line 86: trying to attach `usb 0x055f 0x0218'
[gt68xx] sane_init: config file line 87: ignoring empty line
[gt68xx] sane_init: config file line 88: ignoring comment line
[gt68xx] sane_init: config file line 89: ignoring empty line
[gt68xx] sane_init: config file line 90: ignoring comment line
[gt68xx] sane_init: config file line 91: ignoring comment line
[gt68xx] sane_init: config file line 92: ignoring empty line
[gt68xx] sane_init: config file line 93: ignoring comment line
[gt68xx] sane_init: config file line 94: ignoring comment line
[gt68xx] sane_init: config file line 95: ignoring comment line
[gt68xx] sane_init: config file line 96: trying to attach `usb 0x055f 0x0219'
[gt68xx] sane_init: config file line 97: ignoring empty line
[gt68xx] sane_init: config file line 98: ignoring comment line
[gt68xx] sane_init: config file line 99: ignoring empty line
[gt68xx] sane_init: config file line 100: ignoring comment line
[gt68xx] sane_init: config file line 101: ignoring comment line
[gt68xx] sane_init: config file line 102: ignoring comment line
[gt68xx] sane_init: config file line 103: ignoring empty line
[gt68xx] sane_init: config file line 104: ignoring comment line
[gt68xx] sane_init: config file line 105: ignoring comment line
[gt68xx] sane_init: config file line 106: ignoring comment line
[gt68xx] sane_init: config file line 107: ignoring empty line
[gt68xx] sane_init: config file line 108: ignoring comment line
[gt68xx] sane_init: config file line 109: ignoring comment line
[gt68xx] sane_init: config file line 110: trying to attach `usb 0x055f 0x021a'
[gt68xx] sane_init: config file line 111: ignoring empty line
[gt68xx] sane_init: config file line 112: ignoring comment line
[gt68xx] sane_init: config file line 113: ignoring comment line
[gt68xx] sane_init: config file line 114: ignoring empty line
[gt68xx] sane_init: config file line 115: ignoring comment line
[gt68xx] sane_init: config file line 116: ignoring comment line
[gt68xx] sane_init: config file line 117: trying to attach `usb 0x055f 0x021d'
[gt68xx] sane_init: config file line 118: ignoring empty line
[gt68xx] sane_init: config file line 119: ignoring comment line
[gt68xx] sane_init: config file line 120: ignoring comment line
[gt68xx] sane_init: config file line 121: trying to attach `usb 0x055f 0x021f'
[gt68xx] sane_init: config file line 122: ignoring empty line
[gt68xx] sane_init: config file line 123: ignoring comment line
[gt68xx] sane_init: config file line 124: ignoring comment line
[gt68xx] sane_init: config file line 125: trying to attach `usb 0x055f 0x021c'
[gt68xx] sane_init: config file line 126: ignoring empty line
[gt68xx] sane_init: config file line 127: ignoring comment line
[gt68xx] sane_init: config file line 128: ignoring empty line
[gt68xx] sane_init: config file line 129: ignoring comment line
[gt68xx] sane_init: config file line 130: ignoring comment line
[gt68xx] sane_init: config file line 131: ignoring comment line
[gt68xx] sane_init: config file line 132: ignoring empty line
[gt68xx] sane_init: config file line 133: ignoring comment line
[gt68xx] sane_init: config file line 134: trying to attach `usb 0x055f 0x021b'
[gt68xx] sane_init: config file line 135: ignoring empty line
[gt68xx] sane_init: config file line 136: ignoring comment line
[gt68xx] sane_init: config file line 137: ignoring comment line
[gt68xx] sane_init: config file line 138: trying to attach `usb 0x055f 0x0210'
[gt68xx] sane_init: config file line 139: ignoring empty line
[gt68xx] sane_init: config file line 140: ignoring comment line
[gt68xx] sane_init: config file line 141: ignoring empty line
[gt68xx] sane_init: config file line 142: ignoring comment line
[gt68xx] sane_init: config file line 143: ignoring comment line
[gt68xx] sane_init: config file line 144: trying to attach `usb 0x043d 0x002d'
[gt68xx] sane_init: config file line 145: ignoring empty line
[gt68xx] sane_init: config file line 146: ignoring comment line
[gt68xx] sane_init: config file line 147: ignoring comment line
[gt68xx] sane_init: config file line 148: trying to attach `usb 0x07b3 0x0401'
[gt68xx] sane_init: config file line 149: trying to attach `usb 0x07b3 0x0400'
[gt68xx] sane_init: config file line 150: ignoring empty line
[gt68xx] sane_init: config file line 151: ignoring comment line
[gt68xx] sane_init: config file line 152: ignoring empty line
[gt68xx] sane_init: config file line 153: ignoring comment line
[gt68xx] sane_init: config file line 154: ignoring comment line
[gt68xx] sane_init: config file line 155: ignoring comment line
[gt68xx] sane_init: config file line 156: ignoring empty line
[gt68xx] sane_init: config file line 157: ignoring comment line
[gt68xx] sane_init: config file line 158: ignoring comment line
[gt68xx] sane_init: config file line 159: trying to attach `usb 0x07b3 0x0402'
[gt68xx] sane_init: config file line 160: trying to attach `usb 0x07b3 0x0403'
[gt68xx] sane_init: config file line 161: ignoring empty line
[gt68xx] sane_init: config file line 162: ignoring comment line
[gt68xx] sane_init: config file line 163: ignoring empty line
[gt68xx] sane_init: config file line 164: ignoring comment line
[gt68xx] sane_init: config file line 165: ignoring comment line
[gt68xx] sane_init: config file line 166: ignoring empty line
[gt68xx] sane_init: config file line 167: ignoring comment line
[gt68xx] sane_init: config file line 168: ignoring comment line
[gt68xx] sane_init: config file line 169: trying to attach `usb 0x07b3 0x0413'
[gt68xx] sane_init: config file line 170: ignoring empty line
[gt68xx] sane_init: config file line 171: ignoring comment line
[gt68xx] sane_init: config file line 172: ignoring comment line
[gt68xx] sane_init: config file line 173: trying to attach `usb 0x07b3 0x0422'
[gt68xx] sane_init: config file line 174: ignoring empty line
[gt68xx] sane_init: config file line 175: ignoring comment line
[gt68xx] sane_init: config file line 176: ignoring comment line
[gt68xx] sane_init: config file line 177: trying to attach `usb 0x0458 0x2011'
[gt68xx] sane_init: config file line 178: ignoring empty line
[gt68xx] sane_init: config file line 179: ignoring comment line
[gt68xx] sane_init: config file line 180: ignoring empty line
[gt68xx] sane_init: config file line 181: ignoring comment line
[gt68xx] sane_init: config file line 182: ignoring comment line
[gt68xx] sane_init: config file line 183: trying to attach `usb 0x0458 0x201b'
[gt68xx] sane_init: config file line 184: ignoring empty line
[gt68xx] sane_init: config file line 185: ignoring comment line
[gt68xx] sane_init: config file line 186: ignoring comment line
[gt68xx] sane_init: config file line 187: trying to attach `usb 0x0458 0x2017'
[gt68xx] sane_init: config file line 188: ignoring empty line
[gt68xx] sane_init: config file line 189: ignoring comment line
[gt68xx] sane_init: config file line 190: ignoring comment line
[gt68xx] sane_init: config file line 191: trying to attach `usb 0x0458 0x201a'
[gt68xx] sane_init: config file line 192: ignoring empty line
[gt68xx] sane_init: config file line 193: ignoring comment line
[gt68xx] sane_init: config file line 194: ignoring comment line
[gt68xx] sane_init: config file line 195: trying to attach `usb 0x0458 0x201f'
[gt68xx] sane_init: config file line 196: ignoring empty line
[gt68xx] sane_init: config file line 197: ignoring comment line
[gt68xx] sane_init: config file line 198: ignoring comment line
[gt68xx] sane_init: config file line 199: trying to attach `usb 0x0458 0x2014'
[gt68xx] sane_init: config file line 200: ignoring empty line
[gt68xx] sane_init: config file line 201: ignoring comment line
[gt68xx] sane_init: config file line 202: ignoring comment line
[gt68xx] sane_init: config file line 203: trying to attach `usb 0x04a7 0x0444'
[gt68xx] sane_init: config file line 204: ignoring empty line
[gt68xx] sane_init: config file line 205: ignoring comment line
[gt68xx] sane_init: exit
[gt68xx] sane_get_devices: start: local_only = false
[gt68xx] sane_get_devices: exit
scanimage: no SANE devices found
[gt68xx] sane_exit: start
[gt68xx] sane_exit: exit
Ich hoffe, ich habe alle Infos zusammengetragen, die nützlich sein können. Nun hoffe ich auf einen netten Könner, der mir sagen könnte, was ich tun muss, um meinen Scanner zum Laufen zu bringen.
Beste Grüße
C.
nachdem ich wieder mit der grafischen Oberfläche arbeiten kann, kann ich mich jetzt um mein Scannerproblem kümmern.
Ich versuche einen Epson Perfection 3170 Photo unter Suse 9.1 Prof. (Kernel 2.6, Sane-Version 1.0.15, USB-Anschluss) zu installieren. Da ich nicht den alten Canonscanner gelöscht habe, ist nun die Auswahlliste leer und ich kann den neuen Scanner nicht manuell konfigurieren.
Ich habe im Forum etwas gesucht, habe für mein Problem keine Lösung finden können. Der Befehl 'sane-find-scanner' erbrachte folgende Meldung:
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8, product=0x0116) at libusb:001:007
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
Der Befehl 'scanimage -L' als Benutzer diese:
No scanners were identified. ...usw
Als root:
device `epson:libusb:001:007' is a Epson flatbed scanner
Meine dll.conf unter etc/sane.d lautet folgendermaßen:
# enable the next line if you want to allow access through the network:
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
#canon_pp
coolscan
coolscan2
#dc25
#dc210
#dc240
dmc
epson
fujitsu
#gphoto2
gt68xx
hp
hpsj5s
hp5400
ibm
leo
ma1509
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
nec
niash
pie
pint
plustek
#plustek_pp
#pnm
qcam
ricoh
s9036
sceptre
sharp
sm3600
snapscan
sp15c
#st400
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
#
# The following backends are not included in the sane-backends distribution
# If you want to use them, download them from their webpages and read their
# documentation
#
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
Der Befehl 'export SANE_DEBUG_GT68XX=255 ; scanimage > /dev/null' ergibt folgendes Resultat:
[sanei_debug] Setting debug level of gt68xx to 255.
[gt68xx] SANE GT68xx backend version 1.0 build 66 from sane-backends 1.0.15
[gt68xx] sane_init: authorize != null
[gt68xx] sane_init: debug options are enabled, handle with care
[gt68xx] sane_init: little endian machine
[gt68xx] sane_init: reading config file `gt68xx.conf'
[gt68xx] sane_init: config file line 1: ignoring empty line
[gt68xx] sane_init: config file line 2: ignoring comment line
[gt68xx] sane_init: config file line 3: ignoring comment line
[gt68xx] sane_init: config file line 4: ignoring empty line
[gt68xx] sane_init: config file line 5: ignoring comment line
[gt68xx] sane_init: config file line 6: ignoring comment line
[gt68xx] sane_init: config file line 7: ignoring comment line
[gt68xx] sane_init: config file line 8: ignoring comment line
[gt68xx] sane_init: config file line 9: ignoring empty line
[gt68xx] sane_init: config file line 10: ignoring comment line
[gt68xx] sane_init: config file line 11: ignoring comment line
[gt68xx] sane_init: config file line 12: ignoring comment line
[gt68xx] sane_init: config file line 13: ignoring comment line
[gt68xx] sane_init: config file line 14: ignoring comment line
[gt68xx] sane_init: config file line 15: ignoring empty line
[gt68xx] sane_init: config file line 16: ignoring comment line
[gt68xx] sane_init: config file line 17: ignoring comment line
[gt68xx] sane_init: config file line 18: ignoring comment line
[gt68xx] sane_init: config file line 19: ignoring empty line
[gt68xx] sane_init: config file line 20: ignoring comment line
[gt68xx] sane_init: config file line 21: ignoring comment line
[gt68xx] sane_init: config file line 22: ignoring comment line
[gt68xx] sane_init: config file line 23: trying to attach `usb 0x05d8 0x4002'
[gt68xx] sane_init: config file line 24: ignoring empty line
[gt68xx] sane_init: config file line 25: ignoring comment line
[gt68xx] sane_init: config file line 26: ignoring empty line
[gt68xx] sane_init: config file line 27: ignoring comment line
[gt68xx] sane_init: config file line 28: ignoring comment line
[gt68xx] sane_init: config file line 29: ignoring empty line
[gt68xx] sane_init: config file line 30: ignoring comment line
[gt68xx] sane_init: config file line 31: ignoring comment line
[gt68xx] sane_init: config file line 32: ignoring comment line
[gt68xx] sane_init: config file line 33: ignoring comment line
[gt68xx] sane_init: config file line 34: ignoring empty line
[gt68xx] sane_init: config file line 35: ignoring comment line
[gt68xx] sane_init: config file line 36: ignoring comment line
[gt68xx] sane_init: config file line 37: ignoring comment line
[gt68xx] sane_init: config file line 38: ignoring comment line
[gt68xx] sane_init: config file line 39: ignoring empty line
[gt68xx] sane_init: config file line 40: ignoring comment line
[gt68xx] sane_init: config file line 41: ignoring comment line
[gt68xx] sane_init: config file line 42: ignoring empty line
[gt68xx] sane_init: config file line 43: ignoring comment line
[gt68xx] sane_init: config file line 44: ignoring comment line
[gt68xx] sane_init: config file line 45: ignoring comment line
[gt68xx] sane_init: config file line 46: ignoring empty line
[gt68xx] sane_init: config file line 47: ignoring comment line
[gt68xx] sane_init: config file line 48: ignoring comment line
[gt68xx] sane_init: config file line 49: ignoring comment line
[gt68xx] sane_init: config file line 50: ignoring comment line
[gt68xx] sane_init: config file line 51: ignoring empty line
[gt68xx] sane_init: config file line 52: ignoring comment line
[gt68xx] sane_init: config file line 53: ignoring comment line
[gt68xx] sane_init: config file line 54: ignoring comment line
[gt68xx] sane_init: config file line 55: ignoring comment line
[gt68xx] sane_init: config file line 56: ignoring empty line
[gt68xx] sane_init: config file line 57: ignoring comment line
[gt68xx] sane_init: config file line 58: ignoring comment line
[gt68xx] sane_init: config file line 59: ignoring comment line
[gt68xx] sane_init: config file line 60: ignoring comment line
[gt68xx] sane_init: config file line 61: ignoring empty line
[gt68xx] sane_init: config file line 62: ignoring comment line
[gt68xx] sane_init: config file line 63: ignoring comment line
[gt68xx] sane_init: config file line 64: ignoring comment line
[gt68xx] sane_init: config file line 65: ignoring comment line
[gt68xx] sane_init: config file line 66: ignoring empty line
[gt68xx] sane_init: config file line 67: ignoring comment line
[gt68xx] sane_init: config file line 68: ignoring comment line
[gt68xx] sane_init: config file line 69: ignoring empty line
[gt68xx] sane_init: config file line 70: ignoring comment line
[gt68xx] sane_init: config file line 71: ignoring comment line
[gt68xx] sane_init: config file line 72: ignoring comment line
[gt68xx] sane_init: config file line 73: ignoring comment line
[gt68xx] sane_init: config file line 74: ignoring empty line
[gt68xx] sane_init: config file line 75: ignoring comment line
[gt68xx] sane_init: config file line 76: ignoring comment line
[gt68xx] sane_init: config file line 77: trying to attach `usb 0x055f 0x021e'
[gt68xx] sane_init: config file line 78: ignoring empty line
[gt68xx] sane_init: config file line 79: ignoring comment line
[gt68xx] sane_init: config file line 80: ignoring empty line
[gt68xx] sane_init: config file line 81: ignoring comment line
[gt68xx] sane_init: config file line 82: ignoring comment line
[gt68xx] sane_init: config file line 83: ignoring empty line
[gt68xx] sane_init: config file line 84: ignoring comment line
[gt68xx] sane_init: config file line 85: ignoring comment line
[gt68xx] sane_init: config file line 86: trying to attach `usb 0x055f 0x0218'
[gt68xx] sane_init: config file line 87: ignoring empty line
[gt68xx] sane_init: config file line 88: ignoring comment line
[gt68xx] sane_init: config file line 89: ignoring empty line
[gt68xx] sane_init: config file line 90: ignoring comment line
[gt68xx] sane_init: config file line 91: ignoring comment line
[gt68xx] sane_init: config file line 92: ignoring empty line
[gt68xx] sane_init: config file line 93: ignoring comment line
[gt68xx] sane_init: config file line 94: ignoring comment line
[gt68xx] sane_init: config file line 95: ignoring comment line
[gt68xx] sane_init: config file line 96: trying to attach `usb 0x055f 0x0219'
[gt68xx] sane_init: config file line 97: ignoring empty line
[gt68xx] sane_init: config file line 98: ignoring comment line
[gt68xx] sane_init: config file line 99: ignoring empty line
[gt68xx] sane_init: config file line 100: ignoring comment line
[gt68xx] sane_init: config file line 101: ignoring comment line
[gt68xx] sane_init: config file line 102: ignoring comment line
[gt68xx] sane_init: config file line 103: ignoring empty line
[gt68xx] sane_init: config file line 104: ignoring comment line
[gt68xx] sane_init: config file line 105: ignoring comment line
[gt68xx] sane_init: config file line 106: ignoring comment line
[gt68xx] sane_init: config file line 107: ignoring empty line
[gt68xx] sane_init: config file line 108: ignoring comment line
[gt68xx] sane_init: config file line 109: ignoring comment line
[gt68xx] sane_init: config file line 110: trying to attach `usb 0x055f 0x021a'
[gt68xx] sane_init: config file line 111: ignoring empty line
[gt68xx] sane_init: config file line 112: ignoring comment line
[gt68xx] sane_init: config file line 113: ignoring comment line
[gt68xx] sane_init: config file line 114: ignoring empty line
[gt68xx] sane_init: config file line 115: ignoring comment line
[gt68xx] sane_init: config file line 116: ignoring comment line
[gt68xx] sane_init: config file line 117: trying to attach `usb 0x055f 0x021d'
[gt68xx] sane_init: config file line 118: ignoring empty line
[gt68xx] sane_init: config file line 119: ignoring comment line
[gt68xx] sane_init: config file line 120: ignoring comment line
[gt68xx] sane_init: config file line 121: trying to attach `usb 0x055f 0x021f'
[gt68xx] sane_init: config file line 122: ignoring empty line
[gt68xx] sane_init: config file line 123: ignoring comment line
[gt68xx] sane_init: config file line 124: ignoring comment line
[gt68xx] sane_init: config file line 125: trying to attach `usb 0x055f 0x021c'
[gt68xx] sane_init: config file line 126: ignoring empty line
[gt68xx] sane_init: config file line 127: ignoring comment line
[gt68xx] sane_init: config file line 128: ignoring empty line
[gt68xx] sane_init: config file line 129: ignoring comment line
[gt68xx] sane_init: config file line 130: ignoring comment line
[gt68xx] sane_init: config file line 131: ignoring comment line
[gt68xx] sane_init: config file line 132: ignoring empty line
[gt68xx] sane_init: config file line 133: ignoring comment line
[gt68xx] sane_init: config file line 134: trying to attach `usb 0x055f 0x021b'
[gt68xx] sane_init: config file line 135: ignoring empty line
[gt68xx] sane_init: config file line 136: ignoring comment line
[gt68xx] sane_init: config file line 137: ignoring comment line
[gt68xx] sane_init: config file line 138: trying to attach `usb 0x055f 0x0210'
[gt68xx] sane_init: config file line 139: ignoring empty line
[gt68xx] sane_init: config file line 140: ignoring comment line
[gt68xx] sane_init: config file line 141: ignoring empty line
[gt68xx] sane_init: config file line 142: ignoring comment line
[gt68xx] sane_init: config file line 143: ignoring comment line
[gt68xx] sane_init: config file line 144: trying to attach `usb 0x043d 0x002d'
[gt68xx] sane_init: config file line 145: ignoring empty line
[gt68xx] sane_init: config file line 146: ignoring comment line
[gt68xx] sane_init: config file line 147: ignoring comment line
[gt68xx] sane_init: config file line 148: trying to attach `usb 0x07b3 0x0401'
[gt68xx] sane_init: config file line 149: trying to attach `usb 0x07b3 0x0400'
[gt68xx] sane_init: config file line 150: ignoring empty line
[gt68xx] sane_init: config file line 151: ignoring comment line
[gt68xx] sane_init: config file line 152: ignoring empty line
[gt68xx] sane_init: config file line 153: ignoring comment line
[gt68xx] sane_init: config file line 154: ignoring comment line
[gt68xx] sane_init: config file line 155: ignoring comment line
[gt68xx] sane_init: config file line 156: ignoring empty line
[gt68xx] sane_init: config file line 157: ignoring comment line
[gt68xx] sane_init: config file line 158: ignoring comment line
[gt68xx] sane_init: config file line 159: trying to attach `usb 0x07b3 0x0402'
[gt68xx] sane_init: config file line 160: trying to attach `usb 0x07b3 0x0403'
[gt68xx] sane_init: config file line 161: ignoring empty line
[gt68xx] sane_init: config file line 162: ignoring comment line
[gt68xx] sane_init: config file line 163: ignoring empty line
[gt68xx] sane_init: config file line 164: ignoring comment line
[gt68xx] sane_init: config file line 165: ignoring comment line
[gt68xx] sane_init: config file line 166: ignoring empty line
[gt68xx] sane_init: config file line 167: ignoring comment line
[gt68xx] sane_init: config file line 168: ignoring comment line
[gt68xx] sane_init: config file line 169: trying to attach `usb 0x07b3 0x0413'
[gt68xx] sane_init: config file line 170: ignoring empty line
[gt68xx] sane_init: config file line 171: ignoring comment line
[gt68xx] sane_init: config file line 172: ignoring comment line
[gt68xx] sane_init: config file line 173: trying to attach `usb 0x07b3 0x0422'
[gt68xx] sane_init: config file line 174: ignoring empty line
[gt68xx] sane_init: config file line 175: ignoring comment line
[gt68xx] sane_init: config file line 176: ignoring comment line
[gt68xx] sane_init: config file line 177: trying to attach `usb 0x0458 0x2011'
[gt68xx] sane_init: config file line 178: ignoring empty line
[gt68xx] sane_init: config file line 179: ignoring comment line
[gt68xx] sane_init: config file line 180: ignoring empty line
[gt68xx] sane_init: config file line 181: ignoring comment line
[gt68xx] sane_init: config file line 182: ignoring comment line
[gt68xx] sane_init: config file line 183: trying to attach `usb 0x0458 0x201b'
[gt68xx] sane_init: config file line 184: ignoring empty line
[gt68xx] sane_init: config file line 185: ignoring comment line
[gt68xx] sane_init: config file line 186: ignoring comment line
[gt68xx] sane_init: config file line 187: trying to attach `usb 0x0458 0x2017'
[gt68xx] sane_init: config file line 188: ignoring empty line
[gt68xx] sane_init: config file line 189: ignoring comment line
[gt68xx] sane_init: config file line 190: ignoring comment line
[gt68xx] sane_init: config file line 191: trying to attach `usb 0x0458 0x201a'
[gt68xx] sane_init: config file line 192: ignoring empty line
[gt68xx] sane_init: config file line 193: ignoring comment line
[gt68xx] sane_init: config file line 194: ignoring comment line
[gt68xx] sane_init: config file line 195: trying to attach `usb 0x0458 0x201f'
[gt68xx] sane_init: config file line 196: ignoring empty line
[gt68xx] sane_init: config file line 197: ignoring comment line
[gt68xx] sane_init: config file line 198: ignoring comment line
[gt68xx] sane_init: config file line 199: trying to attach `usb 0x0458 0x2014'
[gt68xx] sane_init: config file line 200: ignoring empty line
[gt68xx] sane_init: config file line 201: ignoring comment line
[gt68xx] sane_init: config file line 202: ignoring comment line
[gt68xx] sane_init: config file line 203: trying to attach `usb 0x04a7 0x0444'
[gt68xx] sane_init: config file line 204: ignoring empty line
[gt68xx] sane_init: config file line 205: ignoring comment line
[gt68xx] sane_init: exit
[gt68xx] sane_get_devices: start: local_only = false
[gt68xx] sane_get_devices: exit
scanimage: no SANE devices found
[gt68xx] sane_exit: start
[gt68xx] sane_exit: exit
Ich hoffe, ich habe alle Infos zusammengetragen, die nützlich sein können. Nun hoffe ich auf einen netten Könner, der mir sagen könnte, was ich tun muss, um meinen Scanner zum Laufen zu bringen.
Beste Grüße
C.