Ich möchte den Gehäuse-Lüfter meines Fileservers regulieren können. Leider scheint der Lüfter nicht gefunden zu werden. Hier die Daten von meinem System:
Mainboard: Gigabyte J4005N D2P (J4005ND2P-CF)
OS: CentOS Linux release 7.9.2009 (Core)
Ich habe das bisher probiert:
Im Voraus schon mal vielen Dank für hilfreiche Antworten
Mainboard: Gigabyte J4005N D2P (J4005ND2P-CF)
OS: CentOS Linux release 7.9.2009 (Core)
Ich habe das bisher probiert:
Code:
sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +32.0°C (crit = +95.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +32.0°C (high = +105.0°C, crit = +105.0°C)
Core 0: +32.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +32.0°C (high = +105.0°C, crit = +105.0°C)
Code:
pwmconfig
# pwmconfig revision $Revision$ ($Date$)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.
We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.
/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
Code:
fancontrol
Loading configuration from /etc/fancontrol ...
Error: Can't read configuration file
Im Voraus schon mal vielen Dank für hilfreiche Antworten