Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

[gelöst] Bildstörungen nach Upgrade auf Suse Leap 42.3

Alles rund um Hardware, die unter Linux läuft oder zum Laufen gebracht werden soll

Moderator: Moderatoren

Antworten
Benutzeravatar
f.gruber
Hacker
Hacker
Beiträge: 415
Registriert: 24. Jun 2006, 19:40
Wohnort: Bad Schallerbach

[gelöst] Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von f.gruber » 29. Nov 2017, 10:19

Hallo,
nach Upgrade von Suse 42.2 auf 42.3 habe ich Bildstörungen auf meinem 10 Jahre alten Notebook. Fenster erscheinen erst nach Mausbewegung. Dialogfenster erscheinen nicht gleich - zunächst sehe ich nur ein Streifenmuster etc. - das alles auch bei deaktivierten Bildschirmeffekten.

Nun, wenn ich mit einem älteren Kernel boote, geht wieder alles normal. Immerhin eine Lösung, die mir in meiner Not eingefallen ist.

Mit diesem Kernel habe ich die Störungen: 4.4.92-31-default
Mit diesem Kernel habe ich keine Störungen: 4.4.92-18.36-default

Aber das kann es wohl nicht sein, denke ich. Sicher ein Treiberproblem. Leider blicke ich da immer wieder nicht durch, wie das unter Linux organisiert ist. Wie komme ich zu einem passenden Treiber.

Bin YAST User aber natürlich auch Konsolenbenutzer :ops:

Folgende Systeminformationen kann ich bieten:

Code: Alles auswählen

hwinfo --gfx
08: PCI 02.0: 0300 VGA compatible controller (VGA)              
  [Created at pci.378]
  Unique ID: _Znp.vmPNBeqoatD
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Model: "Intel Mobile 4 Series Chipset Integrated Graphics Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2a42 "Mobile 4 Series Chipset Integrated Graphics Controller"
  SubVendor: pci 0x152d "QUANTA Computer Inc"
  SubDevice: pci 0x0780 
  Revision: 0x07
  Driver: "i915"
  Driver Modules: "drm"
  Memory Range: 0x90000000-0x903fffff (rw,non-prefetchable)
  Memory Range: 0x80000000-0x8fffffff (ro,non-prefetchable)
  I/O Ports: 0x5110-0x5117 (rw)
  IRQ: 27 (2790 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00008086d00002A42sv0000152Dsd00000780bc03sc00i00"
  Driver Info #0:
    Driver Status: i915 is active
    Driver Activation Cmd: "modprobe i915"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

09: PCI 02.1: 0380 Display controller
  [Created at pci.378]
  Unique ID: ruGf.QDn+4U7TsU3
  SysFS ID: /devices/pci0000:00/0000:00:02.1                                                                                                                                       
  SysFS BusID: 0000:00:02.1                                                                                                                                                        
  Hardware Class: graphics card                                                                                                                                                    
  Model: "Intel Mobile 4 Series Chipset Integrated Graphics Controller"                                                                                                            
  Vendor: pci 0x8086 "Intel Corporation"                                                                                                                                           
  Device: pci 0x2a43 "Mobile 4 Series Chipset Integrated Graphics Controller"                                                                                                      
  SubVendor: pci 0x152d "QUANTA Computer Inc"                                                                                                                                      
  SubDevice: pci 0x0780                                                                                                                                                            
  Revision: 0x07                                                                                                                                                                   
  Memory Range: 0x93500000-0x935fffff (rw,non-prefetchable)                                                                                                                        
  Module Alias: "pci:v00008086d00002A43sv0000152Dsd00000780bc03sc80i00"                                                                                                            
  Config Status: cfg=new, avail=yes, need=no, active=unknown
Warum erscheinen da 2 Einträge als Grafikkarten?

Danke für jede Form freundlicher Nachhilfe.
Zuletzt geändert von f.gruber am 30. Nov 2017, 11:55, insgesamt 1-mal geändert.
Gruß
Ferdinand

Werbung:
josef-wien
Ultimate Guru
Ultimate Guru
Beiträge: 5113
Registriert: 23. Sep 2008, 17:09

Re: Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von josef-wien » 29. Nov 2017, 12:04

f.gruber hat geschrieben:
29. Nov 2017, 10:19
Upgrade von Suse 42.2 auf 42.3
Welche Repos waren zu diesem Zeitpunkt aktiv? Wie hast Du die Umstellung vorgenommen? Kann es sein, daß Du nicht nur beim Kernel eine Mischung aus Paketen von beiden Versionen hast?

Ansonsten könnte /var/log/Xorg.0.log zum Zeitpunkt des "gestörten Betriebs" helfen (die Datei wird bei jedem Start[-Versuch] von Xorg neu erzeugt).

goeba
Hacker
Hacker
Beiträge: 253
Registriert: 23. Nov 2015, 13:48

Re: Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von goeba » 29. Nov 2017, 13:31

Da das Notebook schon älter ist, könnte es auch ein Problem mit SNA haben.

Lies mal hier:

https://wiki.archlinux.org/index.php/in ... SNA_issues

Erstelle wie dort angegeben eine xorg.conf (steht oben in dem Artikel) und setze auf uxa (das ist die ältere Methode) (Details im verlinkten Artikel).

Dann abmelden und wieder anmelden, damit die Änderungen wirksam werden (bzw., wenn Du sowieso mit dem älteren Kernel gebootet hast, neustarten mit dem neueren Kernel).

Ansonsten bitte natürlich auch den Hinweisen von Josef nachgehen. Hier hätte ich insbesondere die drm backports in Verdacht, dass hier die Versionen nicht zusammenpassen.

Einen Treiber "herunterladen" und "installieren" braucht man bei Intel Grafikchips grundsätzlich nicht, die Treiber sind Teil des Kernels. Normalerweise braucht man nicht mal was zu konfigurieren.

Benutzeravatar
f.gruber
Hacker
Hacker
Beiträge: 415
Registriert: 24. Jun 2006, 19:40
Wohnort: Bad Schallerbach

Re: Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von f.gruber » 29. Nov 2017, 13:48

josef-wien hat geschrieben:
29. Nov 2017, 12:04
Welche Repos waren zu diesem Zeitpunkt aktiv? Wie hast Du die Umstellung vorgenommen?
Ich habe das Upgrade mit der DVD gemacht.
Vor dem Update waren keine besonderen Repos aktiviert.

Hier der Inhalt der Datei /var/log/Xorg.0.log

Code: Alles auswählen

cat Xorg.0.log                                                                                                                                             
[     9.212] (--) Log file renamed from "/var/log/Xorg.pid-1345.log" to "/var/log/Xorg.0.log"                                                                                      
[     9.214]                                                                                                                                                                       
X.Org X Server 1.18.3                                                                                                                                                              
Release Date: 2016-04-04                                                                                                                                                           
[     9.214] X Protocol Version 11, Revision 0                                                                                                                                     
[     9.214] Build Operating System: openSUSE SUSE LINUX                                                                                                                           
[     9.214] Current Operating System: Linux PCO-Notebook 4.4.92-31-default #1 SMP Sun Oct 22 06:56:24 UTC 2017 (1d80e8a) x86_64                                                   
[     9.214] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.92-31-default root=UUID=7bdd2916-f1e9-4a73-9f57-1705f8ba487f resume=/dev/disk/by-uuid/60652731-8e19-4640-8cd8-71f4fd7dcbcc splash=silent quiet showopts                                                                                                                                                
[     9.215] Build Date: 16 October 2017  07:19:15PM                                                                                                                               
[     9.215]                                                                                                                                                                       
[     9.215] Current version of pixman: 0.34.0                                                                                                                                     
[     9.215]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[     9.215] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.215] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 29 13:35:02 2017
[     9.216] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     9.216] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.220] (==) No Layout section.  Using the first Screen section.
[     9.220] (==) No screen section available. Using defaults.
[     9.220] (**) |-->Screen "Default Screen Section" (0)
[     9.220] (**) |   |-->Monitor "<default monitor>"
[     9.220] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[     9.220] (==) Automatically adding devices
[     9.220] (==) Automatically enabling devices
[     9.220] (==) Automatically adding GPU devices
[     9.220] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     9.230] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[     9.230]    Entry deleted from font path.
[     9.231] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[     9.231] (==) ModulePath set to "/usr/lib64/xorg/modules"
[     9.231] (**) Extension "XFree86-DGA" is disabled
[     9.231] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.231] (II) Loader magic: 0x80fce0
[     9.231] (II) Module ABI versions:
[     9.231]    X.Org ANSI C Emulation: 0.4
[     9.231]    X.Org Video Driver: 20.0
[     9.231]    X.Org XInput driver : 22.1
[     9.231]    X.Org Server Extension : 9.0
[     9.233] (++) using VT number 7

[     9.233] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     9.235] (II) xfree86: Adding drm device (/dev/dri/card0)
[     9.238] (--) PCI:*(0:0:2:0) 8086:2a42:152d:0780 rev 7, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00005110/8
[     9.238] (--) PCI: (0:0:2:1) 8086:2a43:152d:0780 rev 7, Mem @ 0x93500000/1048576
[     9.238] (II) LoadModule: "glx"
[     9.244] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[     9.263] (II) Module glx: vendor="X.Org Foundation"
[     9.263]    compiled for 1.18.3, module version = 1.0.0
[     9.263]    ABI class: X.Org Server Extension, version 9.0
[     9.263] (==) AIGLX enabled
[     9.264] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
[     9.265] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
[     9.265] (==) Matched intel as autoconfigured driver 0
[     9.265] (==) Matched intel as autoconfigured driver 1
[     9.265] (==) Matched modesetting as autoconfigured driver 2
[     9.265] (==) Matched fbdev as autoconfigured driver 3
[     9.265] (==) Matched vesa as autoconfigured driver 4
[     9.265] (==) Assigned the driver to the xf86ConfigLayout
[     9.265] (II) LoadModule: "intel"
[     9.265] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[     9.271] (II) Module intel: vendor="X.Org Foundation"
[     9.271]    compiled for 1.18.3, module version = 2.99.917
[     9.271]    Module class: X.Org Video Driver
[     9.271]    ABI class: X.Org Video Driver, version 20.0
[     9.271] (II) LoadModule: "modesetting"
[     9.271] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[     9.273] (II) Module modesetting: vendor="X.Org Foundation"
[     9.273]    compiled for 1.18.3, module version = 1.18.3
[     9.273]    Module class: X.Org Video Driver
[     9.273]    ABI class: X.Org Video Driver, version 20.0
[     9.273] (II) LoadModule: "fbdev"
[     9.274] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[     9.274] (II) Module fbdev: vendor="X.Org Foundation"
[     9.274]    compiled for 1.18.3, module version = 0.4.4
[     9.274]    Module class: X.Org Video Driver
[     9.274]    ABI class: X.Org Video Driver, version 20.0
[     9.275] (II) LoadModule: "vesa"
[     9.275] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[     9.276] (II) Module vesa: vendor="X.Org Foundation"
[     9.276]    compiled for 1.18.3, module version = 2.3.4
[     9.276]    Module class: X.Org Video Driver
[     9.276]    ABI class: X.Org Video Driver, version 20.0
[     9.277] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     9.277] (II) intel: Driver for Intel(R) HD Graphics
[     9.277] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     9.277] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     9.277] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     9.277] (II) FBDEV: driver for framebuffer: fbdev
[     9.277] (II) VESA: driver for VESA chipsets: vesa
[     9.288] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[     9.288] (WW) Falling back to old probe method for modesetting
[     9.288] (WW) Falling back to old probe method for fbdev
[     9.288] (II) Loading sub module "fbdevhw"
[     9.288] (II) LoadModule: "fbdevhw"
[     9.288] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[     9.290] (II) Module fbdevhw: vendor="X.Org Foundation"
[     9.290]    compiled for 1.18.3, module version = 0.0.2
[     9.290]    ABI class: X.Org Video Driver, version 20.0
[     9.290] (WW) Falling back to old probe method for vesa
[     9.290] (--) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[     9.290] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3; using a maximum of 2 threads
[     9.290] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[     9.290] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     9.290] (==) intel(0): RGB weight 888
[     9.290] (==) intel(0): Default visual is TrueColor
[     9.291] (II) intel(0): Output LVDS1 has no monitor section
[     9.308] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[     9.308] (II) intel(0): Enabled output LVDS1
[     9.308] (II) intel(0): Output VGA1 has no monitor section
[     9.308] (II) intel(0): Enabled output VGA1
[     9.308] (II) intel(0): Output HDMI1 has no monitor section
[     9.308] (II) intel(0): Enabled output HDMI1
[     9.308] (II) intel(0): Output DP1 has no monitor section
[     9.308] (II) intel(0): Enabled output DP1
[     9.308] (II) intel(0): Output DP2 has no monitor section
[     9.309] (II) intel(0): Enabled output DP2
[     9.309] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     9.309] (II) intel(0): Output VIRTUAL1 has no monitor section
[     9.309] (II) intel(0): Enabled output VIRTUAL1
[     9.309] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
[     9.309] (==) intel(0): TearFree disabled
[     9.309] (==) intel(0): DPI set to (96, 96)
[     9.309] (II) Loading sub module "dri3"
[     9.309] (II) LoadModule: "dri3"
[     9.309] (II) Module "dri3" already built-in
[     9.309] (II) Loading sub module "dri2"
[     9.309] (II) LoadModule: "dri2"
[     9.309] (II) Module "dri2" already built-in
[     9.309] (II) Loading sub module "present"
[     9.309] (II) LoadModule: "present"
[     9.309] (II) Module "present" already built-in
[     9.309] (II) UnloadModule: "modesetting"
[     9.309] (II) Unloading modesetting
[     9.310] (II) UnloadModule: "fbdev"
[     9.310] (II) Unloading fbdev
[     9.310] (II) UnloadSubModule: "fbdevhw"
[     9.310] (II) Unloading fbdevhw
[     9.310] (II) UnloadModule: "vesa"
[     9.310] (II) Unloading vesa
[     9.310] (==) Depth 24 pixmap format is 32 bpp
[     9.313] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
[     9.313] (==) intel(0): Backing store enabled
[     9.313] (==) intel(0): Silken mouse enabled
[     9.313] (II) intel(0): HW Cursor enabled
[     9.313] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     9.314] (==) intel(0): DPMS enabled
[     9.314] (==) intel(0): Display hotplug detection enabled
[     9.314] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[     9.314] (II) intel(0): [DRI2] Setup complete
[     9.314] (II) intel(0): [DRI2]   DRI driver: i965
[     9.314] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     9.314] (II) intel(0): direct rendering: DRI2 enabled
[     9.314] (II) intel(0): hardware support for Present enabled
[     9.314] (--) RandR disabled
[     9.369] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     9.369] (II) AIGLX: enabled GLX_ARB_create_context
[     9.369] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     9.369] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     9.369] (II) AIGLX: enabled GLX_INTEL_swap_event
[     9.369] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     9.369] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     9.369] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     9.369] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     9.369] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     9.369] (II) AIGLX: Loaded and initialized i965
[     9.369] (II) GLX: Initialized DRI2 GL provider for screen 0
[     9.378] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[     9.381] (II) intel(0): Setting screen physical size to 338 x 211
[     9.605] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[     9.605] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.605] (**) Power Button: Applying InputClass "system-keyboard"
[     9.605] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.605] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     9.605] (II) LoadModule: "libinput"
[     9.606] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[     9.615] (II) Module libinput: vendor="X.Org Foundation"
[     9.615]    compiled for 1.18.3, module version = 0.25.1
[     9.615]    Module class: X.Org XInput Driver
[     9.615]    ABI class: X.Org XInput driver, version 22.1
[     9.615] (II) Using input driver 'libinput' for 'Power Button'
[     9.615] (**) Power Button: always reports core events
[     9.615] (**) Option "Device" "/dev/input/event5"
[     9.615] (**) Option "_source" "server/udev"
[     9.615] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[     9.615] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[     9.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[     9.620] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     9.620] (**) Option "xkb_model" "pc105"
[     9.620] (**) Option "xkb_layout" "de"
[     9.620] (**) Option "xkb_variant" "nodeadkeys"
[     9.620] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     9.662] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[     9.663] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[     9.663] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[     9.664] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     9.664] (**) Video Bus: Applying InputClass "system-keyboard"
[     9.664] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     9.664] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     9.664] (II) Using input driver 'libinput' for 'Video Bus'
[     9.664] (**) Video Bus: always reports core events
[     9.664] (**) Option "Device" "/dev/input/event6"
[     9.664] (**) Option "_source" "server/udev"
[     9.664] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[     9.664] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[     9.708] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6"
[     9.708] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     9.708] (**) Option "xkb_model" "pc105"
[     9.708] (**) Option "xkb_layout" "de"
[     9.708] (**) Option "xkb_variant" "nodeadkeys"
[     9.708] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     9.709] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[     9.709] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[     9.710] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     9.710] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.710] (**) Power Button: Applying InputClass "system-keyboard"
[     9.710] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     9.710] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     9.710] (II) Using input driver 'libinput' for 'Power Button'
[     9.710] (**) Power Button: always reports core events
[     9.710] (**) Option "Device" "/dev/input/event2"
[     9.710] (**) Option "_source" "server/udev"
[     9.710] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     9.710] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     9.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[     9.716] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     9.716] (**) Option "xkb_model" "pc105"
[     9.716] (**) Option "xkb_layout" "de"
[     9.716] (**) Option "xkb_variant" "nodeadkeys"
[     9.716] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     9.717] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     9.717] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     9.718] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[     9.718] (II) No input driver specified, ignoring this device.
[     9.718] (II) This device may have been added with another device file.
[     9.718] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[     9.718] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     9.718] (**) Sleep Button: Applying InputClass "system-keyboard"
[     9.718] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     9.718] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     9.718] (II) Using input driver 'libinput' for 'Sleep Button'
[     9.719] (**) Sleep Button: always reports core events
[     9.719] (**) Option "Device" "/dev/input/event4"
[     9.719] (**) Option "_source" "server/udev"
[     9.719] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[     9.719] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[     9.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[     9.744] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     9.744] (**) Option "xkb_model" "pc105"
[     9.744] (**) Option "xkb_layout" "de"
[     9.744] (**) Option "xkb_variant" "nodeadkeys"
[     9.744] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     9.745] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[     9.745] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[     9.746] (II) config/udev: Adding input device USB Webcam (/dev/input/event9)
[     9.746] (**) USB Webcam: Applying InputClass "evdev keyboard catchall"
[     9.747] (**) USB Webcam: Applying InputClass "system-keyboard"
[     9.747] (**) USB Webcam: Applying InputClass "evdev keyboard catchall"
[     9.747] (**) USB Webcam: Applying InputClass "libinput keyboard catchall"
[     9.747] (II) Using input driver 'libinput' for 'USB Webcam'
[     9.747] (**) USB Webcam: always reports core events
[     9.747] (**) Option "Device" "/dev/input/event9"
[     9.747] (**) Option "_source" "server/udev"
[     9.747] (II) input device 'USB Webcam', /dev/input/event9 is tagged by udev as: Keyboard
[     9.747] (II) input device 'USB Webcam', /dev/input/event9 is a keyboard
[     9.804] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb7/7-4/7-4:1.0/input/input11/event9"
[     9.804] (II) XINPUT: Adding extended input device "USB Webcam" (type: KEYBOARD, id 10)
[     9.804] (**) Option "xkb_model" "pc105"
[     9.804] (**) Option "xkb_layout" "de"
[     9.804] (**) Option "xkb_variant" "nodeadkeys"
[     9.804] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     9.805] (II) input device 'USB Webcam', /dev/input/event9 is tagged by udev as: Keyboard
[     9.805] (II) input device 'USB Webcam', /dev/input/event9 is a keyboard
[     9.806] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[     9.806] (II) No input driver specified, ignoring this device.
[     9.806] (II) This device may have been added with another device file.
[     9.807] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[     9.807] (II) No input driver specified, ignoring this device.
[     9.807] (II) This device may have been added with another device file.
[     9.807] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event12)
[     9.807] (II) No input driver specified, ignoring this device.
[     9.807] (II) This device may have been added with another device file.
[     9.808] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event13)
[     9.808] (II) No input driver specified, ignoring this device.
[     9.808] (II) This device may have been added with another device file.
[     9.809] (II) config/udev: Adding input device 2.4G Wireless Mouse (/dev/input/event7)
[     9.809] (**) 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[     9.809] (**) 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[     9.809] (**) 2.4G Wireless Mouse: Applying InputClass "libinput pointer catchall"
[     9.809] (II) Using input driver 'libinput' for '2.4G Wireless Mouse'
[     9.809] (**) 2.4G Wireless Mouse: always reports core events
[     9.809] (**) Option "Device" "/dev/input/event7"
[     9.809] (**) Option "_source" "server/udev"
[     9.810] (II) input device '2.4G Wireless Mouse', /dev/input/event7 is tagged by udev as: Mouse
[     9.810] (II) input device '2.4G Wireless Mouse', /dev/input/event7 is a pointer caps
[     9.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/0003:04F3:02F4.0002/input/input9/event7"
[     9.832] (II) XINPUT: Adding extended input device "2.4G Wireless Mouse" (type: MOUSE, id 11)
[     9.832] (**) Option "AccelerationScheme" "none"
[     9.832] (**) 2.4G Wireless Mouse: (accel) selected scheme none/0
[     9.832] (**) 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[     9.832] (**) 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[     9.833] (II) input device '2.4G Wireless Mouse', /dev/input/event7 is tagged by udev as: Mouse
[     9.833] (II) input device '2.4G Wireless Mouse', /dev/input/event7 is a pointer caps
[     9.834] (II) config/udev: Adding input device 2.4G Wireless Mouse (/dev/input/mouse1)
[     9.834] (II) No input driver specified, ignoring this device.
[     9.834] (II) This device may have been added with another device file.
[     9.835] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     9.835] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     9.835] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     9.835] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     9.835] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     9.835] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     9.835] (**) AT Translated Set 2 keyboard: always reports core events
[     9.835] (**) Option "Device" "/dev/input/event0"
[     9.835] (**) Option "_source" "server/udev"
[     9.836] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     9.836] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[     9.892] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     9.892] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     9.892] (**) Option "xkb_model" "pc105"
[     9.892] (**) Option "xkb_layout" "de"
[     9.892] (**) Option "xkb_variant" "nodeadkeys"
[     9.892] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[     9.893] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     9.893] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[     9.894] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[     9.894] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     9.894] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     9.894] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     9.894] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     9.894] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     9.894] (II) LoadModule: "synaptics"
[     9.894] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[     9.897] (II) Module synaptics: vendor="X.Org Foundation"
[     9.897]    compiled for 1.18.3, module version = 1.8.3
[     9.897]    Module class: X.Org XInput Driver
[     9.897]    ABI class: X.Org XInput driver, version 22.1
[     9.897] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     9.897] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.897] (**) Option "Device" "/dev/input/event1"
[     9.984] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 58)
[     9.984] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 106)
[     9.984] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     9.984] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     9.984] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[     9.984] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     9.984] (**) Option "HorizEdgeScroll" "off"
[     9.984] (**) Option "TapButton1" "1"
[     9.985] (**) Option "TapButton2" "3"
[     9.985] (**) Option "TapButton3" "2"
[     9.985] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.985] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    10.020] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    10.020] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    10.020] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    10.020] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    10.020] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[    10.020] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    10.020] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    10.020] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    10.020] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    10.020] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    10.021] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    10.021] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    10.022] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[    10.022] (II) No input driver specified, ignoring this device.
[    10.022] (II) This device may have been added with another device file.
[    11.309] (II) intel(0): EDID vendor "CMO", prod id 5460
[    11.310] (II) intel(0): Printing DDC gathered Modelines:
[    11.310] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
Gruß
Ferdinand

josef-wien
Ultimate Guru
Ultimate Guru
Beiträge: 5113
Registriert: 23. Sep 2008, 17:09

Re: Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von josef-wien » 29. Nov 2017, 16:26

In der Xorg.0.log sehe ich nichts Besorgniserregendes. Sauerland empfiehlt bei 42.3 öfter die Entfernung des Pakets drm-kmp-default.

goeba
Hacker
Hacker
Beiträge: 253
Registriert: 23. Nov 2015, 13:48

Re: Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von goeba » 29. Nov 2017, 16:36

Code: Alles auswählen

[     9.310] (==) Depth 24 pixmap format is 32 bpp
[     9.313] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
Tatsächlich ist also sna aktiv, wie gesagt, ich würde mal auf uxa umstellen.

Sauerland
Guru
Guru
Beiträge: 3253
Registriert: 5. Aug 2007, 17:57
Wohnort: Sauerland

Re: Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von Sauerland » 29. Nov 2017, 17:25

Oder mal hier lesen:
https://forums.opensuse.org/showthread. ... -Leap-42-3

PS:
xorg.conf ist eigentlich nicht mehr up to Date, das macht man in den Dateien in dem Verzeichnis /etc/X11/xorg.conf.d/
https://en.opensuse.org/SDB:Switch_xf86 ... tel_to_UXA
Desktop: OpenSUSE Leap 15.0, Nvidia-Grafik Kernel 4.x
Laptop: OpenSUSE Leap 15.0, Intel-Skylake, Kernel 4.12

goeba
Hacker
Hacker
Beiträge: 253
Registriert: 23. Nov 2015, 13:48

Re: Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von goeba » 29. Nov 2017, 20:06

@Sauerland: Das steht in dem von mir verlinkten Artikel auch ganz genau so drin. Ist trotzdem eine "xorg.conf", auch wenn sie dann 20-intel ... usw heißt.

Benutzeravatar
f.gruber
Hacker
Hacker
Beiträge: 415
Registriert: 24. Jun 2006, 19:40
Wohnort: Bad Schallerbach

Re: Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von f.gruber » 30. Nov 2017, 11:54

goeba hat geschrieben:
29. Nov 2017, 16:36
Tatsächlich ist also sna aktiv, wie gesagt, ich würde mal auf uxa umstellen.
Ja, das war es anscheinend. Ich habe folgende Datei angelegt und die Bildstörungen sind verschwunden.

Code: Alles auswählen

# /etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
  Identifier  "Intel Graphics"
  Driver      "intel"
  Option      "AccelMethod"  "uxa"
EndSection
Danke für die Hilfe.
Gruß
Ferdinand

Spielwurm
Advanced Hacker
Advanced Hacker
Beiträge: 1312
Registriert: 30. Dez 2007, 11:55
Kontaktdaten:

Re: [gelöst] Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von Spielwurm » 8. Dez 2017, 22:00

Ich habe diese Art von Bildstörung auch auf einem älteren Lifebook mit Mobile GM965/GL960 von Intel (mit Leap 42.3 und Plasma). Bei mir startete der Rechner nach Anlegen der empfohlenen Datei nicht durch in den Runlevel 5. Aber sofort mit dem Löschen der Datei ging der Bootvorgang weiter. So kann's auch sein ...

Spielwurm
Tuxedo Book 15-Zoll mit GM-940 und Opensuse 42.2, AMD Phenom und Nvidia GT210 für Video mit Opensuse 13.1, Zbox HD-ND01 als Server, Pentium III/600 für Audio mit Opensuse 13.1

goeba
Hacker
Hacker
Beiträge: 253
Registriert: 23. Nov 2015, 13:48

Re: [gelöst] Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von goeba » 9. Dez 2017, 10:21

Wie waren denn die Rechte für diese Datei gesetzt, insbesondere die Leserechte? Es ist ja nichts unmöglich, aber doch zumindest unwahrscheinlich, dass wegen einer korrekt angelegten Datei mit einem harmlosen (weil "konservativen") Parameter das Gerät nicht mehr startet.

Oder doch: Wenn z.B. in den Compositoreinstellungen Open GL3.1 eingestellt war, was dann (vermute ich) unter uxa nicht zur Verfügung steht.

Spielwurm
Advanced Hacker
Advanced Hacker
Beiträge: 1312
Registriert: 30. Dez 2007, 11:55
Kontaktdaten:

Re: [gelöst] Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von Spielwurm » 17. Dez 2017, 20:07

So, ich habe jetzt nochmal ein paar Dinge probiert.

Die Rechte der Datei 50-intel.conf sind genau dieselben wie bei den anderen Dateien.
Die Arbeitsflächeneffekte habe ich ausgeschaltet.
Das Paket drm-kmp-default habe ich gelöscht.

Nichts hat eine Besserung gebracht. Es ist auch egal, welche Rendereinstellung beim Compositor angesagt ist: gl3 oder xrender.

Edit: wenn ich die Zeilen in der Datei drin habe, startet X nicht, ich erhalte in der Log-Datei diese Ausgabe:

Code: Alles auswählen

[  1111.314] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1111.316] (--) PCI:*(0:0:2:0) 8086:2a02:10cf:13f5 rev 3, Mem @ 0xfe000000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8
[  1111.316] (--) PCI: (0:0:2:1) 8086:2a03:10cf:13f5 rev 3, Mem @ 0xfe100000/1048576
[  1111.316] (II) LoadModule: "glx"
[  1111.316] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[  1111.317] (II) Module glx: vendor="X.Org Foundation"
[  1111.317] 	compiled for 1.18.3, module version = 1.0.0
[  1111.317] 	ABI class: X.Org Server Extension, version 9.0
[  1111.317] (==) AIGLX enabled
[  1111.317] (II) LoadModule: "intel"
[  1111.318] (WW) Warning, couldn't open module intel
[  1111.318] (II) UnloadModule: "intel"
[  1111.318] (II) Unloading intel
[  1111.318] (EE) Failed to load module "intel" (module does not exist, 0)
[  1111.318] (EE) No drivers available.
[  1111.318] (EE) 
Fatal server error:
[  1111.318] (EE) no screens found(EE) 
[  1111.318] (EE) 
Please consult the The X.Org Foundation support 
Sobald die Zeilen nicht mehr drin sind, startet X ....

Spielwurm
Tuxedo Book 15-Zoll mit GM-940 und Opensuse 42.2, AMD Phenom und Nvidia GT210 für Video mit Opensuse 13.1, Zbox HD-ND01 als Server, Pentium III/600 für Audio mit Opensuse 13.1

Sauerland
Guru
Guru
Beiträge: 3253
Registriert: 5. Aug 2007, 17:57
Wohnort: Sauerland

Re: [gelöst] Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von Sauerland » 17. Dez 2017, 21:06

Sobald die Zeilen nicht mehr drin sind, startet X ....
Und die Xorg.0.log sagt dann was?

Ebenso:

Code: Alles auswählen

/sbin/lspci -nnk | grep EiA3 'vga|3d|display'
So ist das nun mal, wenn man Beiträge kapert.......
Desktop: OpenSUSE Leap 15.0, Nvidia-Grafik Kernel 4.x
Laptop: OpenSUSE Leap 15.0, Intel-Skylake, Kernel 4.12

Spielwurm
Advanced Hacker
Advanced Hacker
Beiträge: 1312
Registriert: 30. Dez 2007, 11:55
Kontaktdaten:

Re: [gelöst] Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von Spielwurm » 17. Dez 2017, 21:22

Die Xorg.log habe ich zitiert. Und der Befehl

Code: Alles auswählen

/sbin/lspci -nnk | grep EiA3 'vga|3d|display'
ergibt

Code: Alles auswählen

grep: vga|3d|display: Datei oder Verzeichnis nicht gefunden
Ich kann aber dienen mit

Code: Alles auswählen

hwinfo --gfx
09: PCI 02.0: 0300 VGA compatible controller (VGA)              
  [Created at pci.378]
  Unique ID: _Znp.h_TAuuSEmx4
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Model: "Intel 965 GM"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2a02 "965 GM"
  SubVendor: pci 0x10cf "Fujitsu Limited."
  SubDevice: pci 0x13f5 
  Revision: 0x03
  Driver: "i915"
  Driver Modules: "drm"
Spielwurm
Tuxedo Book 15-Zoll mit GM-940 und Opensuse 42.2, AMD Phenom und Nvidia GT210 für Video mit Opensuse 13.1, Zbox HD-ND01 als Server, Pentium III/600 für Audio mit Opensuse 13.1

Sauerland
Guru
Guru
Beiträge: 3253
Registriert: 5. Aug 2007, 17:57
Wohnort: Sauerland

Re: [gelöst] Bildstörungen nach Upgrade auf Suse Leap 42.3

Beitrag von Sauerland » 17. Dez 2017, 21:32

Die Xorg.log habe ich zitiert. Und der Befehl
Genau, nur Ausschnitte gepostet.

Aber was ergibt die Ausgabe wenn es funktioniert und wenn es nicht funktioniert.......
/sbin/lspci -nnk | grep EiA3 'vga|3d|display'
Da fehlt ein Minus, mein Fehler:

Code: Alles auswählen

/sbin/lspci -nnk | grep -EiA3 'vga|3d|display'
Desktop: OpenSUSE Leap 15.0, Nvidia-Grafik Kernel 4.x
Laptop: OpenSUSE Leap 15.0, Intel-Skylake, Kernel 4.12

Antworten