• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[Gelöst] Bluetooth (Toshiba/Broadcom) nicht aktiviert

18301

Hacker
Hallo

ich habe ein neue Toshiba Satellite Laptop und Leap 42.2 installiert.
Leider bekomme ich Bluetooth nicht installiert bzw aktiviert.
Gibt es da einen Trick oder so?

Schönen Sonntag, Gruß Frank
 
OP
1

18301

Hacker
Hallo

stimmt vergessen, KDE ist installiert
Hier die Daten des Laptops:
Code:
Prozessor 	type : Intel® Pentium® N3530 Prozessor mit Intel® Burst Technologie 2.0
clock speed : 2,16 (2,58 mit Burst) GHz
2nd level cache : 2
Betriebssystem / Plattform 	
Windows 8.1 (vorinstalliert) - Toshiba empfiehlt Windows 10 Pro.

Design Colour 	Farbe : lila, schwarze Tastatur
Arbeitsspeicher (RAM) 	Standard : 8 (1x) GB
max. Speicherausstattung : 8 GB
Technologie : DDR3L RAM (1.333 MHz)
Festplatte 	Kapazität (formatiert) : 1 TB
U/Min : 5.400 U/min
DVD Super Multi Laufwerk (Double Layer) 	Kompatibilität : CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-R(DL), DVD-RW, DVD+R, DVD+R(DL), DVD+RW, DVD-RAM
Maximale Geschwindigkeit : lesen: 24x CD-ROM, 8x DVD-ROM/ schreiben: 24x CD-R, 4x CD-RW, 10x HS CD-RW, 16x US CD-RW, 8x DVD-R, 6x DVD-R (Double Layer), 6x DVD-RW, 8x DVD+R, 6x DVD+R (Double Layer), 8x DVD+RW, 5x DVD-RAM
Typ : Slim DVD-Supermulti Laufwerk (DL)
Bildschirm 	Bildschirmdiagonale : 39,6 cm (15,6-Zoll)
Typ : Toshiba TruBrite® HD TFT Hochhelligkeits-Display mit LED-Hintergrundbeleuchtung und 16:9 Seitenverhältnis
Auflösung : 1.366 x 768
Grafikadapter 	Typ : Intel® HD Grafik
RAM Typ : geteilt
Interne Auflösung 	Verfügbare interne Video Modi :
Auflösung : 1.366 x 768
Schnittstellen 	1 × Kopfhörer (Stereo) / Mikrofon Combo Anschluss
1 × externer Monitor
1 × HDMI®-out unterstützt 1080p Signal Format
1 × Multi-Kartenleser (unterstützt SD™ Karten bis zu 2 GB, miniSD™/microSD™ Karten mit Adapter bis zu 2 GB, SDHC™ Karten bis zu 32 GB, SDXC™ Karten bis zu 64 GB und Multimedia Karten™ bis zu 2 GB)
1 × RJ-45
2 × USB 2.0
1 × USB 3.0 unterstützt USB Sleep-and-Charge
1 × integrierte HD WebCam mit eingebautem Mikrofon
Erweiterungen 	1 × Steckplatz für Speichererweiterung
Drahtlose Kommunikation 	Wireless Technology : Bluetooth® 4.0 + LE
Version : 4.0 + LE
Kompatibilität : Wi-Fi®
Unterstützter Standard : 802.11b/g/n (bis zu 150 Mbps)
Wireless Technology : Wireless LAN
Drahtgebundene Kommunikation 	Topologie : Fast Ethernet LAN
Datenübertragungsrate : 10BASE-T/100BASE-TX
Sound System 	Unterstützte Audio Formate : 24-bit Stereo
Lautsprecher : eingebaute Onkyo Stereo Lautsprecher, verstärkt durch DTS® Sound™, Skullcandy zertifiziert
Tastatur 	Tasten : 102
Windows Tasten : Ja
Spezielle Optionen : matt schwarze Kacheltastatur und 10er-Nummernblock
Maus/Touchpad/o.Ä. 	Typ : Clickpad mit Multi-Touch Gestensteuerung unterstützt Scrollen, Zoomen und Touchgesten am Windows 8 Bildschirm und startet Funktionen mit Ihren Fingerspitzen
Akku 	Technologie : Lithium-Ion, 4 Zellen
max. Akkulaufzeit : bis zu 4 Std.30 min (Mobile Mark™ 2012)
Stromversorgung 	Netzspannung : AC Adapter (100/240 V) für den weltweiten Gebrauch
Ausgangsspannung : 19 V
max. Stromstärke : 2,37 A
Abmessungen 	B x T x H : 380,0 x 259,9 x 23,5
Gewicht : bis zu 2,2 kg
Garantie 	1 Jahr Europäische Carry-in. Toshiba bietet auch eine breite Palette von Dienstleistungen, um Ihre Standard-Garantie zu Upgraden, werfen Sie einen Blick auf unsere Website www.toshiba.eu/services die richtige für Ihr Produkt zu finden.
1 Jahr europäische Bring-In Herstellergarantie inkl. Vor-Ort Abholservice in Deutschland und Österreich bei Anmeldung der Reparatur an der Toshiba Notebook Hotline.
Mitgelieferte Hardware 	Wechselstromadapter
Bundled Software 	CyberLink MediaStory
CyberLink PowerDVD
DTS® Sound
Evernote®
McAfee LiveSafe™ - Schützt all Ihre Geräte (kostenlose 30 Tage Testversion)
Microsoft® Office (1 Monat Testversion für das neue Microsoft Office 365)
TOSHIBA Eco Utility™
TOSHIBA Function Key
TOSHIBA Media Player by sMedio TrueLink+
TOSHIBA PC Health Monitor
TOSHIBA System Settings
Toshiba Display Utility
Sicherungseinrichtungen 	Benutzer Passwort
Festplatten-Passwort
Supervisor Passwort
Vorrichtung für Kensingtonkabel Sicherung
Besondere Merkmale 	ENERGY STAR qualifizierter Computer
HD Audio Unterstützung
Resolution+
SM BIOS kompatibel
 

Sauerland

Ultimate Guru
Systemeinstellungen---Netzwerk----Blutetooth

oder unter rechts auf das kleine Dreieck klicken-----Einstellungen für Systemabschnitt der Kontrollleiste

rfkill hilft evtl. auch:
Code:
rfkill list all
0: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
 
OP
1

18301

Hacker
In der Systemeinstellungen ist er aktiviert und Sichtbar.
Aber ich bekomme mit keinem Gerät Verbindung hin.

Code:
rfkill list all
0: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
1: Toshiba Bluetooth: Bluetooth
        Soft blocked: no
        Hard blocked: no
2: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
 

tomm.fa

Administrator
Teammitglied
Ansonsten auch mal die Ausgaben von:

Code:
uname -a
Code:
/sbin/lspci -nnk | grep -iA3 net
Code:
lsusb
Code:
/usr/sbin/hwinfo --bluetooth

Was steht in den Fehleraufzeichnungen (journalctl/dmesg) dazu?
 
OP
1

18301

Hacker
Code:
 uname -a
Linux linux-60bs 4.4.49-16-default #1 SMP Sun Feb 19 17:40:35 UTC 2017 (70e9954) x86_64 x86_64 x86_64 GNU/Linux

Code:
 /sbin/lspci -nnk | grep -iA3 net       
01:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
        Subsystem: XAVi Technologies Corp. Device [1b9a:3002]
        Kernel driver in use: wl
        Kernel modules: bcma, wl
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
        Subsystem: Toshiba America Info Systems Device [1179:f920]
        Kernel driver in use: r8169
        Kernel modules: r8169

Code:
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 046d:c046 Logitech, Inc. RX1000 Laser Mouse
Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 0930:0225 Toshiba Corp. 
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Code:
/usr/sbin/hwinfo --bluetooth

Bei
/usr/sbin/hwinfo --bluetooth
kommt nichts.

journalctl/dmesg findet er nicht.
 

tomm.fa

Administrator
Teammitglied
18301 schrieb:
journalctl/dmesg findet er nicht.

dmesg befindet sich im Paket util-linux. Der Aufruf würde als Anwender folgendermaßen aussehen:
Code:
dmesg | grep -Ei 'blue|hci'

journalctl gehört zu systemd und sollte daher auch schon installiert sein (wenn nichts selbst bei der Installation von dir was geändert/angepasst wurde). Der Befehl journalctl -k ersetzt dmesg, bzw. soll diesen ersetzen. Als Root wäre es hier in diesem Fall der folgende Aufruf:
Code:
journalctl -k | grep -iE 'blue|hci'

Dann noch als Root die Ausgabe von:
Code:
modprobe -c | grep -i '0930.*0225'
 
OP
1

18301

Hacker
Code:
dmesg | grep -Ei 'blue|hci'
[    3.956804] sdhci: Secure Digital Host Controller Interface driver
[    3.956809] sdhci: Copyright(c) Pierre Ossman
[    4.003520] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.003537] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    4.004811] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    4.004823] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.005085] usb usb1: Product: xHCI Host Controller
[    4.005087] usb usb1: Manufacturer: Linux 4.4.49-16-default xhci-hcd
[    4.006462] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.006473] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.006586] usb usb2: Product: xHCI Host Controller
[    4.006587] usb usb2: Manufacturer: Linux 4.4.49-16-default xhci-hcd
[    4.033474] ahci 0000:00:13.0: version 3.0
[    4.033771] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[    4.033920] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    4.033925] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso 
[    4.043111] scsi host0: ahci
[    4.043430] scsi host1: ahci
[    4.316125] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    4.720576] usb 1-4.2: new full-speed USB device number 3 using xhci_hcd
[    4.889277] usb 1-4.3: new high-speed USB device number 4 using xhci_hcd
[    5.257713] usb 1-4.3.3: new low-speed USB device number 5 using xhci_hcd
[   13.647802] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[   17.977312] Bluetooth: Core ver 2.21
[   17.977366] Bluetooth: HCI device and connection manager initialized
[   17.977373] Bluetooth: HCI socket layer initialized
[   17.977377] Bluetooth: L2CAP socket layer initialized
[   17.977390] Bluetooth: SCO socket layer initialized
[   18.077168] Bluetooth: hci0: BCM: chip id 70
[   18.093200] Bluetooth: hci0: BCM43142A
[   18.093208] Bluetooth: hci0: BCM (001.001.011) build 0000
[   18.295304] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
[   18.295311] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
[   22.959982] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.959985] Bluetooth: BNEP filters: protocol multicast
[   22.959991] Bluetooth: BNEP socket layer initialized
[   66.579574] Bluetooth: RFCOMM TTY layer initialized
[   66.579598] Bluetooth: RFCOMM socket layer initialized
[   66.579609] Bluetooth: RFCOMM ver 1.11
[   76.118699] Bluetooth: hci0 command 0x1003 tx timeout
[ 3283.966202] Bluetooth: hci0 command 0x1003 tx timeout
Code:
 bluetooth 532480 39 rfcomm,bnep,btusb,btrtl,btbcm,btintel, Live 0x0000000000000000
 <6>[   17.977312] Bluetooth: Core ver 2.21
  <6>[   17.977362] NET: Registered protocol family 31
  <6>[   17.977366] Bluetooth: HCI device and connection manager initialized
  <6>[   17.977373] Bluetooth: HCI socket layer initialized
  <6>[   17.977377] Bluetooth: L2CAP socket layer initialized
  <6>[   17.977390] Bluetooth: SCO socket layer initialized
  <6>[   18.071155] usbcore: registered new interface driver btusb
  <6>[   18.077168] Bluetooth: hci0: BCM: chip id 70
  <6>[   18.093200] Bluetooth: hci0: BCM43142A
  <6>[   18.093208] Bluetooth: hci0: BCM (001.001.011) build 0000
  <4>[   18.295304] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
  <6>[   18.295311] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
  <6>[   22.959982] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  <6>[   22.959985] Bluetooth: BNEP filters: protocol multicast
  <6>[   22.959991] Bluetooth: BNEP socket layer initialized
  <6>[   26.280474] r8169 0000:02:00.0 eth0: link down
  <6>[   26.886636] NET: Registered protocol family 17
 
OP
1

18301

Hacker
Da kommt nichts.


Wenn ich jetzt auf Bluetooth einrichten klicke kommt:
Code:
Es sind keine Bluetooth Adapter gefunden worden.
:???:
 

Sauerland

Ultimate Guru
http://askubuntu.com/questions/616460/bluetooth-not-detecting-devices-firmware-error

Firmware:
https://github.com/winterheart/broadcom-bt-firmware/tree/master/brcm
 

Sauerland

Ultimate Guru
tomm.fa schrieb:
Ich hätte es jetzt wohl mit
Code:
zypper in bcm20702a1-firmware
versucht.
<6>[ 18.077168] Bluetooth: hci0: BCM: chip id 70
<6>[ 18.093200] Bluetooth: hci0: BCM43142A
Ist zwar ein anderer Chip, aber Versuch macht kluch.......

Trotzdem kann ich deinem Post etwas abgewinnen, brauch nun nicht mehr suchen:
Code:
6.501163] Bluetooth: hci0: BCM: chip id 63
[    6.518151] Bluetooth: hci0: Broadcom Bluetooth Device
[    6.519260] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1338
[    7.234117] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1338
[    7.250154] Bluetooth: hci0: Broadcom Bluetooth Device

Ach und Neustart oder manuelles entladen und neues laden von btusb nicht vergessen.
 

Sauerland

Ultimate Guru
Das wäre für 18301 die richtige Firmware:
https://github.com/winterheart/broadcom-bt-firmware/blob/master/brcm/BCM43142A0-0930-0225.hcd

Und gerade mal nachgeschaut, in dem bcm20702a1-firmware ist auch keine Firmware für meinen Stick.
Code:
Bus 002 Device 006: ID 0a5c:21e8 Broadcom Corp. BCM20702A0 Bluetooth 4.0

Siehe:
https://build.opensuse.org/package/view_file/hardware/bcm20702a1-firmware/bcm20702a1-firmware.spec?expand=1
 
OP
1

18301

Hacker
Code:
zypper in bcm20702a1-firmware
Repository-Daten werden geladen...
Installierte Pakete werden gelesen...
'bcm20702a1-firmware' ist bereits installiert.
Kein Aktualisierungskandidat für 'bcm20702a1-firmware-1201650-1.1.noarch'. Die neueste Version ist bereits installiert.
Paketabhängigkeiten werden aufgelöst...

Immer noch kein Adapter gefunden :irre:
 

tomm.fa

Administrator
Teammitglied
18301 schrieb:
Wie geht das denn?
manuelles entladen und neues laden von btusb nicht vergessen.

Als Root/su:
Code:
modprobe -rv btusb
(Entladen)


Code:
modprobe -v btusb
(Laden)

Oder war auch gemeint wie du die passende Firmware auf das System bringst?
 
Oben