Kaffeine meldet sich mit einem kaputten Fenster "Lesefehler von:", wenn ich mit meinen DVB Stick fernsehen will. Unter 13.1 lief alles wunderbar...
Scheint alles in allem ein USB Problem zu sein?
hwinfo:
42: USB 00.0: 11200 TV Card [Created at usb.122] Unique ID: cLrx.7ChgCEaTqDA Parent ID: k4bc.2DFUsyrieMD SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0 SysFS BusID: 1-2:1.0 Hardware Class: tv card Model: "eMPIA EM2881 Video Controller" Hotplug: USB Vendor: usb 0xeb1a "eMPIA Technology, Inc." Device: usb 0x2881 "EM2881 Video Controller" Revision: "1.00" Driver: "em28xx" Driver Modules: "em28xx" Speed: 480 Mbps Module Alias: "usb:vEB1Ap2881d0100dc00dsc00dp00icFFisc00ipFFin00" Driver Info #0: Driver Status: em28xx is active Driver Activation Cmd: "modprobe em28xx" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #41 (Hub)
dmesg |grep dvb
[204751.620147] em2882/3 #0: dvb set to isoc mode.
[206012.788428] em2882/3 #0: dvb set to isoc mode.
[206488.278162] Modules linked in: nls_utf8 isofs ppdev parport_pc lp parport fuse cmac ecb rfcomm nf_log_ipv6 xt_pkttype nf_log_ipv4 nf_log_common xt_LOG xt_limit af_packet iscsi_ibft iscsi_boot_sysfs ip6t_REJECT nf_reject_ipv6 xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT nf_reject_ipv4 iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables bnep snd_usb_usx2y zl10353 snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic em28xx_dvb dvb_core nls_iso8859_1 nls_cp437 tuner_xc2028 tuner vfat fat intel_rapl tvp5150 snd_hda_intel snd_hda_controller snd_usb_audio snd_hda_codec x86_pkg_temp_thermal intel_powerclamp snd_usbmidi_lib snd_rawmidi
[207589.343586] em2882/3 #0: dvb set to isoc mode.
Scheint alles in allem ein USB Problem zu sein?
hwinfo:
42: USB 00.0: 11200 TV Card [Created at usb.122] Unique ID: cLrx.7ChgCEaTqDA Parent ID: k4bc.2DFUsyrieMD SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0 SysFS BusID: 1-2:1.0 Hardware Class: tv card Model: "eMPIA EM2881 Video Controller" Hotplug: USB Vendor: usb 0xeb1a "eMPIA Technology, Inc." Device: usb 0x2881 "EM2881 Video Controller" Revision: "1.00" Driver: "em28xx" Driver Modules: "em28xx" Speed: 480 Mbps Module Alias: "usb:vEB1Ap2881d0100dc00dsc00dp00icFFisc00ipFFin00" Driver Info #0: Driver Status: em28xx is active Driver Activation Cmd: "modprobe em28xx" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #41 (Hub)
dmesg |grep dvb
[204751.620147] em2882/3 #0: dvb set to isoc mode.
[206012.788428] em2882/3 #0: dvb set to isoc mode.
[206488.278162] Modules linked in: nls_utf8 isofs ppdev parport_pc lp parport fuse cmac ecb rfcomm nf_log_ipv6 xt_pkttype nf_log_ipv4 nf_log_common xt_LOG xt_limit af_packet iscsi_ibft iscsi_boot_sysfs ip6t_REJECT nf_reject_ipv6 xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw ipt_REJECT nf_reject_ipv4 iptable_raw xt_CT iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables bnep snd_usb_usx2y zl10353 snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic em28xx_dvb dvb_core nls_iso8859_1 nls_cp437 tuner_xc2028 tuner vfat fat intel_rapl tvp5150 snd_hda_intel snd_hda_controller snd_usb_audio snd_hda_codec x86_pkg_temp_thermal intel_powerclamp snd_usbmidi_lib snd_rawmidi
[207589.343586] em2882/3 #0: dvb set to isoc mode.
Zwei Sachen hätte ich da trotzdem noch: