• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] 3D Beschleunigung für GForce4 Grafikkarte

Cobiweb

Cobiweb

Member
Hallo zusammen,

In den nVidia Repos befinden sich leider keine Treiber mehr für Grafikkarten bis GForce4.
Ich brauche jedoch für diesen Rechner 3D Unterstützung und der nouveau Treiber arbeitet mit dieser Grafikkarte nicht wirklich zusammen.
Also von nVidia den Treiber NVIDIA-Linux-x86-96.43.23-pkg1.run herunter geladen und gem. der Anleitung unter http://de.opensuse.org/SDB:NVIDIA-Treiber-Modulebau#Installationsablauf vorgegangen.
Die Treiberinstallation startet erst gar nicht, da der Installer den Linux-Header nicht findet.
ERROR:
The kernel header file'/lib/modules/3.7.10-1.32-desktop/build/include/linux/version.h' does not exist. The most likely reason for this is that the kernel source files in '/lib/modules3.7.10-1.32-desktop/build/' have not been configured
Zum Vergrößern anklicken....
Hat vielleicht jemand eine Idee, wo ich die Linux-Header finde, oder wie und wo ich sie erstellen muss?
 
J

josef-wien

Ultimate Guru
Bei dem vor Dir genannten link steht dabei, welche Pakete installiert sein müssen. Im übrigen verwendet 12.3 X.Org X Server 1.13.2, und diese Version wird laut http://nvidia.custhelp.com/app/answers/detail/a_id/3142 vom Treiber nicht mehr unterstützt (und daher ist der Treiber im Repo ftp://download.nvidia.com/opensuse/12.3/ auch nicht mehr enthalten).
 
OP
Cobiweb

Cobiweb

Member
towo schrieb:
Und nouveau sollte diese alte Karte problemlos unterstützen.
Mit
und der nouveau Treiber arbeitet mit dieser Grafikkarte nicht wirklich zusammen.
Zum Vergrößern anklicken....
kann leider kein Mensch was anfangen!
Zum Vergrößern anklicken....

Bei der Grafikkarte handelt es sich genauer um eine mit GForce4 MX4000 Grafikchip. Und um genau zu sein, der nouveau Treiber liefert zwar ein Bild, aber eben nicht mehr als 640×480 Pixel mit sehr stark eingeschränktem Farbraum (hab es nicht genauer), was ich nicht als eine Unterstützung der Grafikkarten ansehe.

Wenn der unter Opensuse 13.1 vorhandene Xorg nicht vom nVidia Treiber unterstützt wird, fürchte ich mir eine andere Grafikkarte kaufen zu müssen. Wirklich ärgerlich, in den alten Rechner noch mal was rein stecken zu müssen. :-?
 
towo

towo

Moderator
Teammitglied
Wo ist das Problem, relevante Logfiles zu liefern?
Als minimaler Start wäre /var/log/Xorg.0.log von Vorteil.
 
OP
Cobiweb

Cobiweb

Member
Ich muss korrigieren, dem Logfile nach wird statt dem nouveau Treiber wohl der VESA Treiber verwendet:
Code: 
# cat /var/log/Xorg.0.log
[    20.054] 
X.Org X Server 1.13.2
Release Date: 2013-01-24
[    20.054] X Protocol Version 11, Revision 0
[    20.054] Build Operating System: openSUSE SUSE LINUX
[    20.054] Current Operating System: Linux msi.daheim 3.7.10-1.32-desktop #1 SMP PREEMPT Thu May 8 00:09:34 UTC 2014 (5978d00) i686
[    20.054] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.32-desktop root=UUID=cc3923f4-3be6-4a1d-8984-1984af7f2f03 resume=/dev/disk/by-id/ata-SAMSUNG_SP0802N_S00JJ40X478609-part8 splash=silent quiet showopts nomodeset
[    20.054] Build Date: 17 April 2014  05:37:55AM
[    20.054]  
[    20.054] Current version of pixman: 0.28.2
[    20.054]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    20.054] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.054] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 24 10:46:32 2014
[    20.055] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    20.055] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.056] (==) No Layout section.  Using the first Screen section.
[    20.056] (==) No screen section available. Using defaults.
[    20.056] (**) |-->Screen "Default Screen Section" (0)
[    20.056] (**) |   |-->Monitor "<default monitor>"
[    20.057] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    20.057] (==) Automatically adding devices
[    20.057] (==) Automatically enabling devices
[    20.057] (==) Automatically adding GPU devices
[    20.066] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    20.066]    Entry deleted from font path.
[    20.066] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[    20.066] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    20.066] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.066] (II) Loader magic: 0x8261620
[    20.066] (II) Module ABI versions:
[    20.066]    X.Org ANSI C Emulation: 0.4
[    20.066]    X.Org Video Driver: 13.1
[    20.066]    X.Org XInput driver : 18.0
[    20.066]    X.Org Server Extension : 7.0
[    20.070] (--) PCI:*(0:1:0:0) 10de:0185:1462:9362 rev 164, Mem @ 0xde000000/16777216, 0xd0000000/134217728, BIOS @ 0x????????/131072
[    20.070] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    20.070] Initializing built-in extension Generic Event Extension
[    20.070] Initializing built-in extension SHAPE
[    20.070] Initializing built-in extension MIT-SHM
[    20.070] Initializing built-in extension XInputExtension
[    20.070] Initializing built-in extension XTEST
[    20.070] Initializing built-in extension BIG-REQUESTS
[    20.070] Initializing built-in extension SYNC
[    20.070] Initializing built-in extension XKEYBOARD
[    20.070] Initializing built-in extension XC-MISC
[    20.070] Initializing built-in extension SECURITY
[    20.070] Initializing built-in extension XINERAMA
[    20.070] Initializing built-in extension XFIXES
[    20.070] Initializing built-in extension RENDER
[    20.070] Initializing built-in extension RANDR
[    20.070] Initializing built-in extension COMPOSITE
[    20.070] Initializing built-in extension DAMAGE
[    20.070] Initializing built-in extension MIT-SCREEN-SAVER
[    20.070] Initializing built-in extension DOUBLE-BUFFER
[    20.070] Initializing built-in extension RECORD
[    20.070] Initializing built-in extension DPMS
[    20.070] Initializing built-in extension X-Resource
[    20.072] Initializing built-in extension XVideo
[    20.072] Initializing built-in extension XVideo-MotionCompensation
[    20.072] Initializing built-in extension XFree86-VidModeExtension
[    20.072] Initializing built-in extension XFree86-DGA
[    20.072] Initializing built-in extension XFree86-DRI
[    20.072] Initializing built-in extension DRI2
[    20.072] (II) "glx" will be loaded by default.
[    20.072] (II) LoadModule: "dri2"
[    20.072] (II) Module "dri2" already built-in
[    20.072] (II) LoadModule: "glamoregl"
[    20.110] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    20.144] (II) Module glamoregl: vendor="X.Org Foundation"
[    20.144]    compiled for 1.13.2, module version = 0.5.0
[    20.144]    ABI class: X.Org ANSI C Emulation, version 0.4
[    20.144] (II) LoadModule: "glx"
[    20.150] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.151] (II) Module glx: vendor="X.Org Foundation"
[    20.151]    compiled for 1.13.2, module version = 1.0.0
[    20.151]    ABI class: X.Org Server Extension, version 7.0
[    20.151] (==) AIGLX enabled
[    20.151] Loading extension GLX
[    20.151] (==) Matched nvidia as autoconfigured driver 0
[    20.151] (==) Matched nouveau as autoconfigured driver 1
[    20.151] (==) Matched nv as autoconfigured driver 2
[    20.151] (==) Matched modesetting as autoconfigured driver 3
[    20.151] (==) Matched fbdev as autoconfigured driver 4
[    20.151] (==) Matched vesa as autoconfigured driver 5
[    20.151] (==) Assigned the driver to the xf86ConfigLayout
[    20.151] (II) LoadModule: "nvidia"
[    20.157] (WW) Warning, couldn't open module nvidia
[    20.157] (II) UnloadModule: "nvidia"
[    20.157] (II) Unloading nvidia
[    20.157] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    20.157] (II) LoadModule: "nouveau"
[    20.160] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    20.178] (II) Module nouveau: vendor="X.Org Foundation"
[    20.178]    compiled for 1.13.1, module version = 1.0.6
[    20.178]    Module class: X.Org Video Driver
[    20.178]    ABI class: X.Org Video Driver, version 13.1
[    20.178] (II) LoadModule: "nv"
[    20.180] (WW) Warning, couldn't open module nv
[    20.180] (II) UnloadModule: "nv"
[    20.180] (II) Unloading nv
[    20.180] (EE) Failed to load module "nv" (module does not exist, 0)
[    20.180] (II) LoadModule: "modesetting"
[    20.181] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.182] (II) Module modesetting: vendor="X.Org Foundation"
[    20.182]    compiled for 1.13.2, module version = 0.8.0
[    20.182]    Module class: X.Org Video Driver
[    20.182]    ABI class: X.Org Video Driver, version 13.1
[    20.182] (II) LoadModule: "fbdev"
[    20.184] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    20.185] (II) Module fbdev: vendor="X.Org Foundation"
[    20.185]    compiled for 1.13.1, module version = 0.4.3
[    20.185]    Module class: X.Org Video Driver
[    20.185]    ABI class: X.Org Video Driver, version 13.1
[    20.185] (II) LoadModule: "vesa"
[    20.188] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.188] (II) Module vesa: vendor="X.Org Foundation"
[    20.188]    compiled for 1.13.1, module version = 2.3.2
[    20.188]    Module class: X.Org Video Driver
[    20.188]    ABI class: X.Org Video Driver, version 13.1
[    20.188] (II) NOUVEAU driver 
[    20.188] (II) NOUVEAU driver for NVIDIA chipset families :
[    20.188]    RIVA TNT        (NV04)
[    20.188]    RIVA TNT2       (NV05)
[    20.188]    GeForce 256     (NV10)
[    20.188]    GeForce 2       (NV11, NV15)
[    20.188]    GeForce 4MX     (NV17, NV18)
[    20.188]    GeForce 3       (NV20)
[    20.188]    GeForce 4Ti     (NV25, NV28)
[    20.188]    GeForce FX      (NV3x)
[    20.188]    GeForce 6       (NV4x)
[    20.190]    GeForce 7       (G7x)
[    20.190]    GeForce 8       (G8x)
[    20.190]    GeForce GTX 200 (NVA0)
[    20.190]    GeForce GTX 400 (NVC0)
[    20.190] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    20.190] (II) FBDEV: driver for framebuffer: fbdev
[    20.190] (II) VESA: driver for VESA chipsets: vesa
[    20.190] (++) using VT number 7

[    20.194] (EE) [drm] KMS not enabled
[    20.194] (EE) open /dev/dri/card0: No such file or directory
[    20.194] (WW) Falling back to old probe method for modesetting
[    20.194] (EE) open /dev/dri/card0: No such file or directory
[    20.194] (II) Loading sub module "fbdevhw"
[    20.194] (II) LoadModule: "fbdevhw"
[    20.204] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    20.204] (II) Module fbdevhw: vendor="X.Org Foundation"
[    20.204]    compiled for 1.13.2, module version = 0.0.2
[    20.204]    ABI class: X.Org Video Driver, version 13.1
[    20.204] (**) FBDEV(1): claimed PCI slot 1@0:0:0
[    20.204] (II) FBDEV(1): using default device
[    20.204] (WW) Falling back to old probe method for vesa
[    20.206] (EE) Screen 0 deleted because of no matching config section.
[    20.206] (II) UnloadModule: "modesetting"
[    20.206] (II) FBDEV(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    20.206] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    20.206] (==) FBDEV(0): RGB weight 888
[    20.206] (==) FBDEV(0): Default visual is TrueColor
[    20.206] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    20.206] (II) FBDEV(0): hardware: VESA VGA (video memory: 1216kB)
[    20.206] (II) FBDEV(0): checking modes against framebuffer device...
[    20.206] (II) FBDEV(0): checking modes against monitor...
[    20.206] (--) FBDEV(0): Virtual size is 640x480 (pitch 640)
[    20.206] (**) FBDEV(0):  Built-in mode "current": 30.7 MHz, 36.9 kHz, 73.3 Hz
[    20.206] (II) FBDEV(0): Modeline "current"x0.0   30.72  640 672 752 832  480 484 488 504 -hsync -vsync -csync (36.9 kHz b)
[    20.206] (==) FBDEV(0): DPI set to (96, 96)
[    20.206] (II) Loading sub module "fb"
[    20.206] (II) LoadModule: "fb"
[    20.212] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.214] (II) Module fb: vendor="X.Org Foundation"
[    20.214]    compiled for 1.13.2, module version = 1.0.0
[    20.214]    ABI class: X.Org ANSI C Emulation, version 0.4
[    20.214] (**) FBDEV(0): using shadow framebuffer
[    20.214] (II) Loading sub module "shadow"
[    20.214] (II) LoadModule: "shadow"
[    20.222] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    20.230] (II) Module shadow: vendor="X.Org Foundation"
[    20.230]    compiled for 1.13.2, module version = 1.1.0
[    20.230]    ABI class: X.Org ANSI C Emulation, version 0.4
[    20.230] (II) UnloadModule: "vesa"
[    20.230] (II) Unloading vesa
[    20.230] (==) Depth 24 pixmap format is 32 bpp
[    20.230] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    20.230] (==) FBDEV(0): Backing store disabled
[    20.231] (==) FBDEV(0): DPMS enabled
[    20.231] (==) RandR enabled
[    20.260] (II) AIGLX: Screen 0 is not DRI2 capable
[    20.261] (II) AIGLX: Screen 0 is not DRI capable
[    20.524] (II) AIGLX: Loaded and initialized swrast
[    20.524] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    20.693] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    20.693] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.693] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.693] (**) Power Button: Applying InputClass "LocalKeyboard"
[    20.693] (II) LoadModule: "evdev"
[    20.695] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.696] (II) Module evdev: vendor="X.Org Foundation"
[    20.696]    compiled for 1.13.1, module version = 2.7.3
[    20.696]    Module class: X.Org XInput Driver
[    20.696]    ABI class: X.Org XInput driver, version 18.0
[    20.696] (II) Using input driver 'evdev' for 'Power Button'
[    20.697] (**) Power Button: always reports core events
[    20.697] (**) evdev: Power Button: Device: "/dev/input/event5"
[    20.697] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.697] (--) evdev: Power Button: Found keys
[    20.697] (II) evdev: Power Button: Configuring as keyboard
[    20.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[    20.697] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.697] (**) Option "xkb_rules" "evdev"
[    20.697] (**) Option "xkb_model" "evdev"
[    20.697] (**) Option "xkb_layout" "de"
[    20.755] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    20.755] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.755] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.755] (**) Power Button: Applying InputClass "LocalKeyboard"
[    20.756] (II) Using input driver 'evdev' for 'Power Button'
[    20.756] (**) Power Button: always reports core events
[    20.756] (**) evdev: Power Button: Device: "/dev/input/event3"
[    20.756] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.756] (--) evdev: Power Button: Found keys
[    20.756] (II) evdev: Power Button: Configuring as keyboard
[    20.756] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[    20.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    20.756] (**) Option "xkb_rules" "evdev"
[    20.756] (**) Option "xkb_model" "evdev"
[    20.756] (**) Option "xkb_layout" "de"
[    20.757] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    20.758] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    20.758] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    20.758] (**) Sleep Button: Applying InputClass "LocalKeyboard"
[    20.758] (II) Using input driver 'evdev' for 'Sleep Button'
[    20.758] (**) Sleep Button: always reports core events
[    20.758] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[    20.758] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    20.758] (--) evdev: Sleep Button: Found keys
[    20.758] (II) evdev: Sleep Button: Configuring as keyboard
[    20.758] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
[    20.758] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    20.758] (**) Option "xkb_rules" "evdev"
[    20.758] (**) Option "xkb_model" "evdev"
[    20.758] (**) Option "xkb_layout" "de"
[    20.760] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[    20.760] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    20.760] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    20.760] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    20.760] (**) Logitech USB Receiver: always reports core events
[    20.760] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[    20.760] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    20.760] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    20.760] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    20.760] (--) evdev: Logitech USB Receiver: Found relative axes
[    20.760] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    20.760] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    20.760] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    20.760] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    20.760] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.760] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.0/input/input1/event1"
[    20.760] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[    20.761] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    20.761] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    20.761] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    20.761] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    20.761] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    20.762] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    20.762] (II) No input driver specified, ignoring this device.
[    20.763] (II) This device may have been added with another device file.
[    20.764] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    20.764] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    20.764] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    20.764] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard"
[    20.764] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    20.764] (**) Logitech USB Receiver: always reports core events
[    20.764] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[    20.764] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    20.764] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    20.764] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    20.764] (--) evdev: Logitech USB Receiver: Found relative axes
[    20.764] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    20.764] (--) evdev: Logitech USB Receiver: Found absolute axes
[    20.764] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    20.764] (--) evdev: Logitech USB Receiver: Found keys
[    20.764] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    20.764] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    20.764] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    20.764] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    20.764] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.765] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1:1.1/input/input2/event2"
[    20.765] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[    20.765] (**) Option "xkb_rules" "evdev"
[    20.765] (**) Option "xkb_model" "evdev"
[    20.765] (**) Option "xkb_layout" "de"
[    20.765] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    20.765] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    20.766] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    20.766] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    20.766] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    20.766] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    20.767] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    20.767] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.767] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.767] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[    20.767] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    20.767] (**) AT Translated Set 2 keyboard: always reports core events
[    20.767] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    20.767] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    20.767] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    20.767] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    20.767] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    20.767] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    20.767] (**) Option "xkb_rules" "evdev"
[    20.768] (**) Option "xkb_model" "evdev"
[    20.768] (**) Option "xkb_layout" "de"
[    20.769] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    20.769] (II) No input driver specified, ignoring this device.
[    20.769] (II) This device may have been added with another device file.
[    20.779] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)

Aber mehr, als daß der nouveau Treiber wohl gar nicht erst geladen wurde, kann ich da leider nicht heraus lesen.

Und falls es relevant sein sollte, hier noch die Hardwareinformationen von yast:
Code: 
│─┬─Display             
│ └┬─GeForce4 MX 4000                
│  ├──Alter eindeutiger Schlüssel: a8Og.gGO38CWZEiA 
│  ├──Bus-ID: 1                                  
│  ├──Bus: PCI                                 
│  ├──Eindeutiger Schlüssel: VCu0.gGO38CWZEiA        
│  ├──Gerät: GeForce4 MX 4000                             
│  ├──Geräte-ID (Spez.): 103266                       
│  ├──Gerätekennung: 65925             
│  ├──Hersteller-ID: 69854            
│  ├──Hersteller: nVidia Corporation                       
│  ├──Hwcfg-Bus: pci                             
│  ├──Kartentyp: AGP                             
│  ├──Klasse (Spez.): VGA-kompatibler Controller   
│  ├──Klasse: Display-Controller                            
│  ├──Modell: nVidia GeForce4 MX 4000             
│  ├┬─Ressourcen                                   
│  │├+─Arbeitsspeicher                
│  │├+─E/A-Port              
│  │└+─IRQ                                 
│  ├──Sysfs-ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 
│  ├──Sysfs-ID: 0000:01:00.0   
│  ├──Unterhersteller-ID: 70754                 
│  ├──Unterhersteller: Micro-Star International Co., Ltd.      
│  ├──Version: 164                                                 
│  ├──modalias: pci:v000010DEd00000185sv00001462sd00009362bc03sc00i00
│  ├┬─x11                   
│  │├┬─nv            
│  ││├──Version: 4       
│  ││└──server: nv           
│  │└┬─nvidia          
│  │ ├──Version: 4       
│  │ ├──has_3d: Ja   
│  │ └──server: nvidia     
│  └──Übergeordnete eindeutige ID: vSkL.i8os9252y4E
 
towo

towo

Moderator
Teammitglied
Da du dem Kernel nomodeset mitgibst, ist es kein Wunder, daß nouveau nicht benutzt wird!
nouveau braucht KMS zwingend, was Du aber per nomodeset deaktivierst!
 
OP
Cobiweb

Cobiweb

Member
Danke für die Hilfe.
Nachdem ich mit beim entfernen des nomodeset Parameters noch die Partitionstabelle zerschossen hatte, läuft nun alles wieder, der nouveau Treiber startet und gibt auch die gewünschte Bildschirmauflösung her.
Jetzt habe ich aber noch ein anderes Problem, das gehört jedoch nicht hier in die Rubrik Hardware.
Cu Cobiweb
 
OP
Cobiweb

Cobiweb

Member
Hallo,

Nur noch mal zur Info.
Falls jemand das liest, um eine GForce4 oder älter mit dem nouveau Treiber zum laufen zu bekommen, weil der gerne den Gnome3 in seiner modernen Form nutzen möchte. Spart euch den Aufwand und besorgt euch gleich eine Grafikkarte mit Radeon GPU.

Cu Cobiweb
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben