• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

{gelöst}Nach Update auf 12.3 bootproblem

G

Gandalf333

Hacker
Habe gestern mein System von 12.1 auf 12.3 mit zypper upgedated.

Jetzt kann ich nur noch über failsafe mein system hochfahren.

ich habe eine nvidia Grafikkarte.

Beim normalen hängt es bei:
Code: 
ok Reached target graphical interface


Code: 
rpm -qa | grep kernel
kernel-devel-3.7.10-1.16.1.noarch
kernel-source-3.7.10-1.16.1.noarch
kernel-xen-devel-3.7.10-1.16.1.x86_64
kernel-desktop-3.7.10-1.16.1.x86_64
kernel-firmware-20130714git-1.5.1.noarch
kernel-syms-3.7.10-1.16.1.x86_64
kernel-default-devel-3.7.10-1.16.1.x86_64
kernel-desktop-devel-3.7.10-1.16.1.x86_64


Code: 
rpm -qa | grep nvidia
nvidia-computeG03-319.32-15.1.x86_64
nvidia-gfxG02-kmp-desktop-304.88_k3.7.10_1.1-25.1.x86_64
nvidia-computeG02-304.88-26.1.x86_64
x11-video-nvidiaG02-304.88-26.1.x86_64
nvidia-gfxG03-kmp-desktop-319.32_k3.7.10_1.1-15.1.x86_64
x11-video-nvidiaG03-319.32-15.1.x86_64

Code: 
uname -a
Linux linux-rzay 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64 x86_64 x86_64 GNU/Linux
 
S

Sauerland

Ultimate Guru
rpm -qa | grep nvidia
nvidia-computeG03-319.32-15.1.x86_64
nvidia-gfxG02-kmp-desktop-304.88_k3.7.10_1.1-25.1.x86_64
nvidia-computeG02-304.88-26.1.x86_64
x11-video-nvidiaG02-304.88-26.1.x86_64
nvidia-gfxG03-kmp-desktop-319.32_k3.7.10_1.1-15.1.x86_64
x11-video-nvidiaG03-319.32-15.1.x86_64
Zum Vergrößern anklicken....
Da schlägt sich anscheinend der G02 mit dem G03-Treiber.
 
OP
G

Gandalf333

Hacker
Sauerland schrieb:
rpm -qa | grep nvidia
nvidia-computeG03-319.32-15.1.x86_64
nvidia-gfxG02-kmp-desktop-304.88_k3.7.10_1.1-25.1.x86_64
nvidia-computeG02-304.88-26.1.x86_64
x11-video-nvidiaG02-304.88-26.1.x86_64
nvidia-gfxG03-kmp-desktop-319.32_k3.7.10_1.1-15.1.x86_64
x11-video-nvidiaG03-319.32-15.1.x86_64
Zum Vergrößern anklicken....
Da schlägt sich anscheinend der G02 mit dem G03-Treiber.
Zum Vergrößern anklicken....


Soll ich einen davon deinstallieren?

Was ist der Unterschied?
 
OP
G

Gandalf333

Hacker
towo schrieb:
Und ein
Code: 
cat /var/log/Xorg.0.log
sagt was?
Zum Vergrößern anklicken....

Code: 
 cat /var/log/Xorg.0.log
[    14.274] 
X.Org X Server 1.13.2
Release Date: 2013-01-24
[    14.274] X Protocol Version 11, Revision 0
[    14.274] Build Operating System: openSUSE SUSE LINUX
[    14.274] Current Operating System: Linux linux-rzay.site 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) x86_64
[    14.274] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HD103SJ_S246JD1B300972-part2 apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x31a
[    14.274] Build Date: 15 July 2013  12:22:00PM
[    14.274]  
[    14.274] Current version of pixman: 0.28.2
[    14.274]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    14.274] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.274] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 20 08:27:54 2013
[    14.275] (==) Using config file: "/etc/X11/xorg.conf.install"
[    14.275] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    14.275] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.460] (==) ServerLayout "Layout"
[    14.460] (**) |-->Screen "vboxvideo" (0)
[    14.460] (**) |   |-->Monitor "<default monitor>"
[    14.460] (**) |   |-->Device "vboxvideo"
[    14.460] (==) No monitor specified for screen "vboxvideo".
        Using a default monitor configuration.
[    14.460] (**) |-->Screen "vmware" (1)
[    14.460] (**) |   |-->Monitor "<default monitor>"
[    14.461] (**) |   |-->Device "vmware"
[    14.461] (==) No monitor specified for screen "vmware".
        Using a default monitor configuration.
[    14.461] (**) |-->Screen "cirrus" (2)
[    14.461] (**) |   |-->Monitor "<default monitor>"
[    14.461] (**) |   |-->Device "cirrus"
[    14.461] (==) No monitor specified for screen "cirrus".
        Using a default monitor configuration.
[    14.461] (**) |-->Screen "fbdev" (3)
[    14.461] (**) |   |-->Monitor "<default monitor>"
[    14.461] (**) |   |-->Device "fbdev"
[    14.461] (==) No monitor specified for screen "fbdev".                                                                                                                          
        Using a default monitor configuration.                                                                                                                                      
[    14.461] (**) |-->Screen "vesa" (4)                                                                                                                                             
[    14.461] (**) |   |-->Monitor "<default monitor>"                                                                                                                               
[    14.461] (**) |   |-->Device "vesa"                                                                                                                                             
[    14.461] (==) No monitor specified for screen "vesa".                                                                                                                           
        Using a default monitor configuration.                                                                                                                                      
[    14.461] (==) Automatically adding devices                                                                                                                                      
[    14.461] (==) Automatically enabling devices                                                                                                                                    
[    14.461] (==) Automatically adding GPU devices                                                                                                                                  
[    14.653] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.                                                                                                         
[    14.653]    Entry deleted from font path.                                                                                                                                       
[    14.653] (==) FontPath set to:                                                                                                                                                  
        /usr/share/fonts/misc:unscaled,                                                                                                                                             
        /usr/share/fonts/Type1/,                                                                                                                                                    
        /usr/share/fonts/100dpi:unscaled,                                                                                                                                           
        /usr/share/fonts/75dpi:unscaled,                                                                                                                                            
        /usr/share/fonts/ghostscript/,                                                                                                                                              
        /usr/share/fonts/cyrillic:unscaled,                                                                                                                                         
        /usr/share/fonts/truetype/,                                                                                                                                                 
        built-ins                                                                                                                                                                   
[    14.653] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"                                                                                       
[    14.653] (II) The server relies on udev to provide the list of input devices.                                                                                                   
        If no devices become available, reconfigure udev or disable AutoAddDevices.                                                                                                 
[    14.653] (II) Loader magic: 0x801c20                                                                                                                                            
[    14.653] (II) Module ABI versions:                                                                                                                                              
[    14.653]    X.Org ANSI C Emulation: 0.4
[    14.653]    X.Org Video Driver: 13.1
[    14.653]    X.Org XInput driver : 18.0
[    14.654]    X.Org Server Extension : 7.0
[    14.655] (--) PCI:*(0:4:0:0) 10de:0641:196d:0000 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[    14.655] (II) Open ACPI successful (/var/run/acpid.socket)
[    14.655] Initializing built-in extension Generic Event Extension
[    14.655] Initializing built-in extension SHAPE
[    14.655] Initializing built-in extension MIT-SHM
[    14.655] Initializing built-in extension XInputExtension
[    14.655] Initializing built-in extension XTEST
[    14.656] Initializing built-in extension BIG-REQUESTS
[    14.656] Initializing built-in extension SYNC
[    14.656] Initializing built-in extension XKEYBOARD
[    14.656] Initializing built-in extension XC-MISC
[    14.656] Initializing built-in extension SECURITY
[    14.656] Initializing built-in extension XINERAMA
[    14.656] Initializing built-in extension XFIXES
[    14.656] Initializing built-in extension RENDER
[    14.656] Initializing built-in extension RANDR
[    14.656] Initializing built-in extension COMPOSITE
[    14.656] Initializing built-in extension DAMAGE
[    14.656] Initializing built-in extension MIT-SCREEN-SAVER
[    14.656] Initializing built-in extension DOUBLE-BUFFER
[    14.656] Initializing built-in extension RECORD
[    14.656] Initializing built-in extension DPMS
[    14.656] Initializing built-in extension X-Resource
[    14.656] Initializing built-in extension XVideo
[    14.656] Initializing built-in extension XVideo-MotionCompensation
[    14.656] Initializing built-in extension XFree86-VidModeExtension
[    14.656] Initializing built-in extension XFree86-DGA
[    14.656] Initializing built-in extension XFree86-DRI
[    14.656] Initializing built-in extension DRI2
[    14.656] (II) "glx" will be loaded by default.
[    14.656] (II) LoadModule: "dri2"
[    14.656] (II) Module "dri2" already built-in
[    14.656] (II) LoadModule: "glamoregl"
[    14.670] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[    15.687] (EE) Failed to load /usr/lib64/xorg/modules/libglamoregl.so: /usr/lib64/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context
[    15.687] (II) UnloadModule: "glamoregl"
[    15.687] (II) Unloading glamoregl
[    15.687] (EE) Failed to load module "glamoregl" (loader failed, 7)
[    15.687] (II) LoadModule: "glx"
[    15.688] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so
[    16.103] (II) Module glx: vendor="NVIDIA Corporation"
[    16.103]    compiled for 4.0.2, module version = 1.0.0
[    16.103]    Module class: X.Org Server Extension
[    16.103] (II) NVIDIA GLX Module  304.88  Wed Mar 27 14:46:57 PDT 2013
[    16.103] Loading extension GLX
[    16.103] (II) LoadModule: "vboxvideo"
[    16.115] (WW) Warning, couldn't open module vboxvideo
[    16.115] (II) UnloadModule: "vboxvideo"
[    16.115] (II) Unloading vboxvideo
[    16.115] (EE) Failed to load module "vboxvideo" (module does not exist, 0)
[    16.115] (II) LoadModule: "vmware"
[    16.116] (II) Loading /usr/lib64/xorg/modules/drivers/vmware_drv.so
[    16.266] (II) Module vmware: vendor="X.Org Foundation"
[    16.266]    compiled for 1.13.1, module version = 13.0.0
[    16.266]    Module class: X.Org Video Driver
[    16.266]    ABI class: X.Org Video Driver, version 13.1
[    16.266] (II) LoadModule: "cirrus"
[    16.267] (II) Loading /usr/lib64/xorg/modules/drivers/cirrus_drv.so
[    16.277] (II) Module cirrus: vendor="X.Org Foundation"
[    16.277]    compiled for 1.13.1, module version = 1.5.2
[    16.277]    Module class: X.Org Video Driver
[    16.277]    ABI class: X.Org Video Driver, version 13.1
[    16.277] (II) LoadModule: "fbdev"
[    16.278] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[    16.278] (II) Module fbdev: vendor="X.Org Foundation"
[    16.278]    compiled for 1.13.1, module version = 0.4.3
[    16.278]    Module class: X.Org Video Driver
[    16.278]    ABI class: X.Org Video Driver, version 13.1
[    16.278] (II) LoadModule: "vesa"
[    16.279] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    16.279] (II) Module vesa: vendor="X.Org Foundation"
[    16.279]    compiled for 1.13.1, module version = 2.3.2
[    16.279]    Module class: X.Org Video Driver
[    16.279]    ABI class: X.Org Video Driver, version 13.1
[    16.279] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[    16.279] (II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
        CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
        CL-GD5465, CL-GD7548, CL-GD7555, CL-GD7556
[    16.279] (II) FBDEV: driver for framebuffer: fbdev
[    16.279] (II) VESA: driver for VESA chipsets: vesa
[    16.279] (++) using VT number 7

[    16.279] (WW) Falling back to old probe method for cirrus
[    16.280] (II) Loading sub module "fbdevhw"
[    16.280] (II) LoadModule: "fbdevhw"
[    16.280] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    16.280] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.280]    compiled for 1.13.2, module version = 0.0.2
[    16.280]    ABI class: X.Org Video Driver, version 13.1
[    16.280] (**) FBDEV(0): claimed PCI slot 4@0:0:0
[    16.280] (II) FBDEV(0): using default device
[    16.281] (WW) Falling back to old probe method for vesa
[    16.281] (II) FBDEV(0): Creating default Display subsection in Screen section
        "fbdev" for depth/fbbpp 16/16
[    16.281] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[    16.281] (==) FBDEV(0): RGB weight 565
[    16.281] (==) FBDEV(0): Default visual is TrueColor
[    16.281] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    16.281] (II) FBDEV(0): hardware: VESA VGA (video memory: 5120kB)
[    16.281] (II) FBDEV(0): checking modes against framebuffer device...
[    16.281] (II) FBDEV(0): checking modes against monitor...
[    16.281] (--) FBDEV(0): Virtual size is 1280x1024 (pitch 1280)
[    16.281] (**) FBDEV(0):  Built-in mode "current": 131.1 MHz, 80.3 kHz, 76.6 Hz
[    16.281] (II) FBDEV(0): Modeline "current"x0.0  131.09  1280 1312 1472 1632  1024 1028 1032 1048 -hsync -vsync -csync (80.3 kHz b)
[    16.281] (==) FBDEV(0): DPI set to (96, 96)
[    16.281] (II) Loading sub module "fb"
[    16.281] (II) LoadModule: "fb"
[    16.281] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    16.282] (II) Module fb: vendor="X.Org Foundation"
[    16.282]    compiled for 1.13.2, module version = 1.0.0
[    16.282]    ABI class: X.Org ANSI C Emulation, version 0.4
[    16.282] (**) FBDEV(0): using shadow framebuffer
[    16.282] (II) Loading sub module "shadow"
[    16.282] (II) LoadModule: "shadow"
[    16.282] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[    16.286] (II) Module shadow: vendor="X.Org Foundation"
[    16.286]    compiled for 1.13.2, module version = 1.1.0
[    16.286]    ABI class: X.Org ANSI C Emulation, version 0.4
[    16.286] (II) UnloadModule: "vmware"
[    16.286] (II) Unloading vmware
[    16.302] (II) UnloadModule: "cirrus"
[    16.302] (II) Unloading cirrus
[    16.302] (II) UnloadModule: "vesa"
[    16.302] (II) Unloading vesa
[    16.302] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    16.302] (==) FBDEV(0): Backing store disabled
[    16.302] (==) FBDEV(0): DPMS enabled
[    16.302] (==) RandR enabled
[    16.312] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    16.731] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    16.731] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.731] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.731] (**) Power Button: Applying InputClass "LocalKeyboard"
[    16.731] (II) LoadModule: "evdev"
[    16.731] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    16.748] (II) Module evdev: vendor="X.Org Foundation"
[    16.748]    compiled for 1.13.1, module version = 2.7.3
[    16.748]    Module class: X.Org XInput Driver
[    16.748]    ABI class: X.Org XInput driver, version 18.0
[    16.748] (II) Using input driver 'evdev' for 'Power Button'
[    16.748] (**) Power Button: always reports core events
[    16.748] (**) evdev: Power Button: Device: "/dev/input/event3"
[    16.749] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.749] (--) evdev: Power Button: Found keys
[    16.749] (II) evdev: Power Button: Configuring as keyboard
[    16.749] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    16.749] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    16.749] (**) Option "xkb_rules" "evdev"
[    16.749] (**) Option "xkb_model" "evdev"
[    16.749] (**) Option "xkb_layout" "de"
[    16.749] (**) Option "xkb_variant" "nodeadkeys"
[    16.793] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    16.793] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.793] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.793] (**) Power Button: Applying InputClass "LocalKeyboard"
[    16.793] (II) Using input driver 'evdev' for 'Power Button'
[    16.793] (**) Power Button: always reports core events
[    16.793] (**) evdev: Power Button: Device: "/dev/input/event2"
[    16.793] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.793] (--) evdev: Power Button: Found keys
[    16.793] (II) evdev: Power Button: Configuring as keyboard
[    16.793] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    16.793] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    16.793] (**) Option "xkb_rules" "evdev"
[    16.793] (**) Option "xkb_model" "evdev"
[    16.793] (**) Option "xkb_layout" "de"
[    16.793] (**) Option "xkb_variant" "nodeadkeys"
[    16.794] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[    16.794] (II) No input driver specified, ignoring this device.
[    16.794] (II) This device may have been added with another device file.
[    16.794] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[    16.794] (II) No input driver specified, ignoring this device.
[    16.794] (II) This device may have been added with another device file.
[    16.794] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[    16.794] (II) No input driver specified, ignoring this device.
[    16.794] (II) This device may have been added with another device file.
[    16.794] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event8)
[    16.794] (II) No input driver specified, ignoring this device.
[    16.794] (II) This device may have been added with another device file.
[    16.794] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event9)
[    16.794] (II) No input driver specified, ignoring this device.
[    16.794] (II) This device may have been added with another device file.
[    16.795] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[    16.795] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    16.795] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    16.795] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    16.795] (**) Logitech USB Optical Mouse: always reports core events
[    16.795] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[    16.795] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc018
[    16.795] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[    16.795] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    16.795] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    16.795] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    16.795] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    16.795] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    16.795] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    16.795] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.795] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/event1"
[    16.795] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[    16.795] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    16.795] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    16.795] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    16.795] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    16.795] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    16.795] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    16.795] (II) No input driver specified, ignoring this device.
[    16.795] (II) This device may have been added with another device file.
[    16.796] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    16.796] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.796] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.796] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[    16.796] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    16.796] (**) AT Translated Set 2 keyboard: always reports core events
[    16.796] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    16.796] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    16.796] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    16.796] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    16.796] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    16.796] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    16.796] (**) Option "xkb_rules" "evdev"
[    16.796] (**) Option "xkb_model" "evdev"
[    16.796] (**) Option "xkb_layout" "de"
[    16.796] (**) Option "xkb_variant" "nodeadkeys"
[    16.796] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    16.796] (II) No input driver specified, ignoring this device.
[    16.796] (II) This device may have been added with another device file.
[    16.801] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    34.846] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    34.847] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[    34.878] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
 
boser

boser

Member
So wie ich das sehe, fehlen folgende Module/Prg. :

1. [ 15.687] (EE) Failed to load module "glamoregl" (loader failed, 7)
2. [ 16.115] (EE) Failed to load module "vboxvideo" (module does not exist, 0)

dann taucht hoffentlich der fehler nicht mehr auf :

[ 16.312] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
 
OP
G

Gandalf333

Hacker
boser schrieb:
So wie ich das sehe, fehlen folgende Module/Prg. :

1. [ 15.687] (EE) Failed to load module "glamoregl" (loader failed, 7)
2. [ 16.115] (EE) Failed to load module "vboxvideo" (module does not exist, 0)

dann taucht hoffentlich der fehler nicht mehr auf :

[ 16.312] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
Zum Vergrößern anklicken....


Soll ich es über yast installieren?

finde es dort nicht.
 
S

Sauerland

Ultimate Guru
Gandalf333 schrieb:
Sauerland schrieb:
rpm -qa | grep nvidia
nvidia-computeG03-319.32-15.1.x86_64
nvidia-gfxG02-kmp-desktop-304.88_k3.7.10_1.1-25.1.x86_64
nvidia-computeG02-304.88-26.1.x86_64
x11-video-nvidiaG02-304.88-26.1.x86_64
nvidia-gfxG03-kmp-desktop-319.32_k3.7.10_1.1-15.1.x86_64
x11-video-nvidiaG03-319.32-15.1.x86_64
Zum Vergrößern anklicken....
Da schlägt sich anscheinend der G02 mit dem G03-Treiber.
Zum Vergrößern anklicken....


Soll ich einen davon deinstallieren?

Was ist der Unterschied?
Zum Vergrößern anklicken....
Ja.

Der G02 unterstützt auch ältere Karten, beim G03 sind einige rausgeflogen.

ich habe eine nvidia Grafikkarte.
Zum Vergrößern anklicken....
Poste welche und man kann sagen, welchen Treiber Du benutzen kannst, evtl. funktionieren sogar beide, aber nicht zusammen.

Das ganze läuft aber nicht unter Virtualbox oder Vmware?
 
J

josef-wien

Ultimate Guru
Die Xorg.0.log stammt vom Failsafe-Start, bei dem xorg.conf.install verwendet wird, und nützt daher nichts. Die GLX-Fehlermeldung ist logisch, da mit /usr/lib64/xorg/modules/updates/extensions/libglx.so eine Nvidia-Datei verwendet wird, die nicht zum Rest paßt.

Sauerland schrieb:
Das ganze läuft aber nicht unter Virtualbox oder Vmware?
Zum Vergrößern anklicken....
Nicht verwirren lassen, das liegt an xorg.conf.install.
 
OP
G

Gandalf333

Hacker
josef-wien schrieb:
Die Xorg.0.log stammt vom Failsafe-Start, bei dem xorg.conf.install verwendet wird, und nützt daher nichts. Die GLX-Fehlermeldung ist logisch, da mit /usr/lib64/xorg/modules/updates/extensions/libglx.so eine Nvidia-Datei verwendet wird, die nicht zum Rest paßt.

Sauerland schrieb:
Das ganze läuft aber nicht unter Virtualbox oder Vmware?
Zum Vergrößern anklicken....
Nicht verwirren lassen, das liegt an xorg.conf.install.
Zum Vergrößern anklicken....

Habe jetzt verschiedene Lösungsvorschläge. Was soll ich jetzt tun?
 
S

spoensche

Moderator
Teammitglied
Code: 
PCI:*(0:4:0:0) 10de:0641:196d:0000 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288

Das Sieht mir eher nach einer Nvidia Optimus Karte aus. Sprich bei dir werkelt noch eine Intel HD,
 
S

Sauerland

Ultimate Guru
spoensche schrieb:
Das Sieht mir eher nach einer Nvidia Optimus Karte aus. Sprich bei dir werkelt noch eine Intel HD,
Zum Vergrößern anklicken....
Das kann man ja schnell mit:
Code: 
/sbin/lspci -nnk | grep -iA2 vga
herausbekommen.

Dann wäre natürlich der obige Treiber überflüssig.
 
OP
G

Gandalf333

Hacker
Sauerland schrieb:
spoensche schrieb:
Das Sieht mir eher nach einer Nvidia Optimus Karte aus. Sprich bei dir werkelt noch eine Intel HD,
Zum Vergrößern anklicken....
Das kann man ja schnell mit:
Code: 
/sbin/lspci -nnk | grep -iA2 vga
herausbekommen.

Dann wäre natürlich der obige Treiber überflüssig.
Zum Vergrößern anklicken....

Code: 
 /sbin/lspci -nnk | grep -iA2 vga
04:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96 [GeForce 9400 GT] [10de:0641] (rev a1)
        Subsystem: Club-3D BV Device [196d:0000]
        Kernel driver in use: nvidia

Code: 
Hardware Class: graphics card
  Model: "nVidia G96 [GeForce 9400 GT]"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0641 "G96 [GeForce 9400 GT]"
  SubVendor: pci 0x196d "Club-3D BV"
  SubDevice: pci 0x0000 
  Revision: 0xa1
  Driver: "nvidia"
  Driver Modules: "nvidia"
  Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable)
  Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
  Memory Range: 0xfa000000-0xfbffffff (rw,non-prefetchable)
  I/O Ports: 0xec00-0xec7f (rw)
  Memory Range: 0xfeb80000-0xfebfffff (ro,non-prefetchable,disabled)
  IRQ: 16 (no events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd00000641sv0000196Dsd00000000bc03sc00i00"
  Driver Info #0:
    Driver Status: nvidiafb is not active
    Driver Activation Cmd: "modprobe nvidiafb"
  Driver Info #1:
    Driver Status: nouveau is not active
    Driver Activation Cmd: "modprobe nouveau"
  Driver Info #2:
    Driver Status: nvidia is active
    Driver Activation Cmd: "modprobe nvidia"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #16 (PCI bridge)
 
S

Sauerland

Ultimate Guru
Gandalf333 schrieb:
Sauerland schrieb:
rpm -qa | grep nvidia
nvidia-computeG03-319.32-15.1.x86_64
nvidia-gfxG02-kmp-desktop-304.88_k3.7.10_1.1-25.1.x86_64
nvidia-computeG02-304.88-26.1.x86_64
x11-video-nvidiaG02-304.88-26.1.x86_64
nvidia-gfxG03-kmp-desktop-319.32_k3.7.10_1.1-15.1.x86_64
x11-video-nvidiaG03-319.32-15.1.x86_64
Zum Vergrößern anklicken....
Da schlägt sich anscheinend der G02 mit dem G03-Treiber.
Zum Vergrößern anklicken....


Soll ich einen davon deinstallieren?
Zum Vergrößern anklicken....
Deinstallier alle G03 Treiber und boote neu.
 
OP
G

Gandalf333

Hacker
Soll ich einen davon deinstallieren?[/quote]
Deinstallier alle G03 Treiber und boote neu.[/quote]

Habe ich gemacht.
Vielen Dank an alle, die mich so toll unterstützt haben. ;)
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben