CANON MP 640

SUSE 12.1 Notebook HP 635 - AMD

Der Drucker wurde erkannt, druckt aber nicht.

Jetzt bin ich (auch noch Anfänger) ratlos.

Weiß jemand Rat?

Gruss Georg (drachentoeter )

Treiber gibt es hier:
http://www.canon.de/Support/Consume...XMA_MP_series/MP640.aspx?type=download&page=1

Hilfreich wären auch folgende Informationen:
- wie genau wurde der Drucker installiert?
- welche Treiber wurden benutzt?
- was waren die Fehlermeldungen?

Der Drucker wurde über OpenSuse 12.1 YaST / Hardware / Drucker installiert.
Treiber? Location: linux - 8zjm.site
Linux verfügt offensichtlich über den Treiber, denn
die Druckerbezeichnung wird sauber angezeigt: "CANON MP640 series"

Keine Fehlermeldung.
Der Drucker werkelt vor sich hin, druckt aber beharrlich nicht.
Weder einen Testdruck noch ein Dokument.

Ich sehe mir jetzt die CANON-Seite an.

Danke erst mal.

drachentoeter schrieb:

Ich sehe mir jetzt die CANON-Seite an.

Zum Vergrößern anklicken....

Falls du da nicht weiter kommst, hier noch eine weitere Alternative: http://www.turboprint.de/printers_Canon.html

Ich habe mal wieder versucht ...mit Hilfe der automatischen Druckererkennung und Installation.
Ohne Erfolg.
Der Drucker wurde erkannt. Div.Treiber stehen zur Verfügung.
Der Druckauftrag wird versandt, gerendert ---- und dann passiert nix mehr. Absolute Ruhe.
Keine Ahnung, was eine dirty file ist., Jedenfalls nicht bei LINUX.


Folgendes Fehlerprotokoll habe ich entdeckt. Es ist evtl. nicht vollständig.

I [23/Feb/2012:19:00:47 +0100] Listening to [v1.::1]:631 (IPv6)
I [23/Feb/2012:19:00:47 +0100] Listening to 127.0.0.1:631 (IPv4)
I [23/Feb/2012:19:00:47 +0100] Listening to /var/run/cups/cups.sock (Domain)
W [23/Feb/2012:19:00:47 +0100] No limit for Validate-Job defined in policy allowallforanybody and no suitable template found.
W [23/Feb/2012:19:00:47 +0100] No limit for Cancel-Jobs defined in policy allowallforanybody and no suitable template found.
W [23/Feb/2012:19:00:47 +0100] No limit for Cancel-My-Jobs defined in policy allowallforanybody and no suitable template found.
W [23/Feb/2012:19:00:47 +0100] No limit for Close-Job defined in policy allowallforanybody and no suitable template found.
W [23/Feb/2012:19:00:47 +0100] No limit for CUPS-Get-Document defined in policy allowallforanybody and no suitable template found.
W [23/Feb/2012:19:00:47 +0100] No JobPrivateAccess defined in policy allowallforanybody - using defaults.
W [23/Feb/2012:19:00:47 +0100] No JobPrivateValues defined in policy allowallforanybody - using defaults.
W [23/Feb/2012:19:00:47 +0100] No SubscriptionPrivateAccess defined in policy allowallforanybody - using defaults.
W [23/Feb/2012:19:00:47 +0100] No SubscriptionPrivateValues defined in policy allowallforanybody - using defaults.
E [23/Feb/2012:19:00:47 +0100] Unknown directive JobPrivateAccess on line 92.
E [23/Feb/2012:19:00:47 +0100] Unknown directive JobPrivateValues on line 93.
E [23/Feb/2012:19:00:47 +0100] Unknown directive SubscriptionPrivateAccess on line 95.
E [23/Feb/2012:19:00:47 +0100] Unknown directive SubscriptionPrivateValues on line 96.
I [23/Feb/2012:19:00:47 +0100] Remote access is disabled.
D [23/Feb/2012:19:00:47 +0100] Added auto ServerAlias linux-8zjm.site
D [23/Feb/2012:19:00:47 +0100] Added auto ServerAlias linux-8zjm
I [23/Feb/2012:19:00:47 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [23/Feb/2012:19:00:47 +0100] Using default TempDir of /var/spool/cups/tmp...
I [23/Feb/2012:19:00:47 +0100] Configured for up to 100 clients.
I [23/Feb/2012:19:00:47 +0100] Allowing up to 100 client connections per host.
D [23/Feb/2012:19:00:47 +0100] load_ppd: Loading /var/cache/cups/Canon-MP640-series.data...
D [23/Feb/2012:19:00:47 +0100] cupsdRegisterPrinter(p=0xb77b7320(Canon-MP640-series))
D [23/Feb/2012:19:00:47 +0100] cupsdMarkDirty(---p--)
D [23/Feb/2012:19:00:47 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
I [23/Feb/2012:19:00:47 +0100] Partial reload complete.
I [23/Feb/2012:19:00:47 +0100] Listening to [v1.::1]:631 on fd 7...
I [23/Feb/2012:19:00:47 +0100] Listening to 127.0.0.1:631 on fd 8...
I [23/Feb/2012:19:00:47 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
I [23/Feb/2012:19:00:47 +0100] Resuming new connection processing...
D [23/Feb/2012:19:00:47 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [23/Feb/2012:19:00:47 +0100] Discarding unused server-restarted event...
D [23/Feb/2012:19:00:48 +0100] cupsdAcceptClient: 12 from localhost (Domain)
D [23/Feb/2012:19:00:48 +0100] Report: clients=1
D [23/Feb/2012:19:00:48 +0100] Report: jobs=1
D [23/Feb/2012:19:00:48 +0100] Report: jobs-active=0
D [23/Feb/2012:19:00:48 +0100] Report: printers=1
D [23/Feb/2012:19:00:48 +0100] Report: printers-implicit=0
D [23/Feb/2012:19:00:48 +0100] Report: stringpool-string-count=22650
D [23/Feb/2012:19:00:48 +0100] Report: stringpool-alloc-bytes=16784
D [23/Feb/2012:19:00:48 +0100] Report: stringpool-total-bytes=436592
D [23/Feb/2012:19:00:49 +0100] cupsdAcceptClient: 13 from localhost (Domain)
D [23/Feb/2012:19:00:54 +0100] cupsdReadClient: 13 POST / HTTP/1.1
D [23/Feb/2012:19:00:54 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [23/Feb/2012:19:00:54 +0100] cupsdAuthorize: No authentication data provided.
D [23/Feb/2012:19:00:54 +0100] cupsdReadClient: 13 1.1 Get-Jobs 1
D [23/Feb/2012:19:00:54 +0100] Get-Jobs ipp://localhost/printers/
D [23/Feb/2012:19:00:54 +0100] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [23/Feb/2012:19:00:54 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [23/Feb/2012:19:00:54 +0100] cupsdReadClient: 13 POST / HTTP/1.1
D [23/Feb/2012:19:00:54 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [23/Feb/2012:19:00:54 +0100] cupsdAuthorize: No authentication data provided.
D [23/Feb/2012:19:00:54 +0100] cupsdReadClient: 13 1.1 Get-Jobs 1
D [23/Feb/2012:19:00:54 +0100] Get-Jobs ipp://localhost/printers/
D [23/Feb/2012:19:00:54 +0100] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/) from localhost
D [23/Feb/2012:19:00:54 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [23/Feb/2012:19:00:55 +0100] cupsdReadClient: 12 PUT /admin/conf/cupsd.conf HTTP/1.1
D [23/Feb/2012:19:00:55 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [23/Feb/2012:19:00:55 +0100] cupsdAuthorize: Authorized as root using PeerCred
D [23/Feb/2012:19:00:55 +0100] cupsdIsAuthorized: username="root"
I [23/Feb/2012:19:00:55 +0100] Installing config file "/etc/cups/cupsd.conf"...
D [23/Feb/2012:19:00:55 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [23/Feb/2012:19:00:55 +0100] cupsdCloseClient: 12
D [23/Feb/2012:19:00:55 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [23/Feb/2012:19:00:55 +0100] cupsdCloseClient: 13
D [23/Feb/2012:19:00:55 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"

Aber das Protokoll hilft vllt.weiter. Danke!