• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Lenovo USB Webcam läuft nicht

P

pilus

Hacker
Hallo,
ich habe mir gerade einen Thinkpad T500 gekauft und die externe USB-Webcam von Lenovo läuft nicht.
linux-1hox:/home/antoinette # lsmod
Module Size Used by
aes_i586 8576 1
aes_generic 27968 1 aes_i586
af_packet 23680 4
ip6t_LOG 6500 6
xt_tcpudp 3136 2
xt_pkttype 1632 3
xt_physdev 2416 2
ipt_LOG 6308 6
xt_limit 2628 12
rfcomm 75824 4
sco 20260 2
bridge 63412 1
stp 2532 1 bridge
llc 6828 2 bridge,stp
bnep 18592 2
l2cap 43520 16 rfcomm,bnep
snd_pcm_oss 51648 0
snd_mixer_oss 18496 1 snd_pcm_oss
snd_seq 64784 0
edd 10376 0
i915 250120 1
drm 184640 2 i915
i2c_algo_bit 6884 1 i915
cpufreq_conservative 8396 0
cpufreq_userspace 3332 0
cpufreq_powersave 1568 0
acpi_cpufreq 9196 0
speedstep_lib 5092 0
ip6t_REJECT 5472 3
nf_conntrack_ipv6 22100 4
ip6table_raw 3008 1
xt_NOTRACK 1632 4
ipt_REJECT 3168 3
xt_state 2208 8
iptable_raw 2848 1
iptable_filter 3616 1
ip6table_mangle 4160 0
nf_conntrack_netbios_ns 2432 0
nf_conntrack_ipv4 11688 4
nf_conntrack 83616 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_defrag_ipv4 2112 1 nf_conntrack_ipv4
ip_tables 13520 2 iptable_raw,iptable_filter
ip6table_filter 3616 1
ip6_tables 14960 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables 19140 12 ip6t_LOG,xt_tcpudp,xt_pkttype,xt_physdev,ipt_LOG,xt_limit,ip6t_REJECT,xt_NOTRACK,ipt_REJECT,xt_state,ip_tables,ip6_tables
ipv6 306100 31 ip6t_REJECT,nf_conntrack_ipv6,ip6table_mangle
fuse 75964 1
loop 17324 0
dm_mod 84836 0
arc4 1952 2
ecb 3264 2
cryptomgr 95216 0
aead 8640 1 cryptomgr
pcompress 2752 1 cryptomgr
crypto_blkcipher 14884 2 ecb,cryptomgr
crypto_hash 14464 1 cryptomgr
snd_hda_codec_conexant 34656 1
pcmcia 42152 0
crypto_algapi 21220 9 aes_i586,aes_generic,arc4,ecb,cryptomgr,aead,pcompress,crypto_blkcipher,crypto_hash
snd_usb_audio 95744 1
snd_usb_lib 21600 1 snd_usb_audio
snd_rawmidi 26720 1 snd_usb_lib
snd_seq_device 8556 2 snd_seq,snd_rawmidi
iwlagn 180960 0
yenta_socket 41388 1
rsrc_nonstatic 13664 1 yenta_socket
iwlcore 205188 1 iwlagn
snd_hda_intel 32352 2
mac80211 214872 2 iwlagn,iwlcore
iTCO_wdt 12452 0
snd_hda_codec 94656 2 snd_hda_codec_conexant,snd_hda_intel
gspca_vc032x 23072 0
gspca_main 26624 1 gspca_vc032x
sg 32660 0
snd_hwdep 8612 2 snd_usb_audio,snd_hda_codec
btusb 16788 2
ac 4900 0
videodev 39168 1 gspca_main
video 24600 1 i915
sdhci_pci 8704 0
ohci1394 32880 0
pcmcia_core 41748 3 pcmcia,yenta_socket,rsrc_nonstatic
sr_mod 17316 0
iTCO_vendor_support 3876 1 iTCO_wdt
v4l1_compat 15684 1 videodev
output 3328 1 video
battery 12772 0
thinkpad_acpi 74948 0
bluetooth 104356 9 rfcomm,sco,bnep,l2cap,btusb
cdrom 40448 1 sr_mod
sdhci 23396 1 sdhci_pci
joydev 11712 0
wmi 7720 0
ricoh_mmc 4352 0
ieee1394 102340 1 ohci1394
mmc_core 71132 1 sdhci
led_class 4836 3 iwlcore,thinkpad_acpi,sdhci
snd_pcm 97444 4 snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_timer 27176 2 snd_seq,snd_pcm
i2c_i801 12756 0
i2c_core 32628 5 i915,drm,i2c_algo_bit,videodev,i2c_i801
cfg80211 103584 3 iwlagn,iwlcore,mac80211
intel_agp 31292 1
rfkill 22868 4 thinkpad_acpi,bluetooth,cfg80211
button 6544 0
snd 75076 19 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_hda_codec_conexant,snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
heci 63404 0
pcspkr 2784 0
e1000e 144816 0
soundcore 9120 1 snd
snd_page_alloc 10248 2 snd_hda_intel,snd_pcm
ext4 381864 2
jbd2 96768 1 ext4
crc16 1952 1 ext4
uhci_hcd 29840 0
ahci 38928 3
libata 200748 1 ahci
ehci_hcd 57296 0
rtc_cmos 15280 0
rtc_core 22908 1 rtc_cmos
rtc_lib 3168 1 rtc_core
fan 5028 0
thermal 21020 0
processor 50384 3 acpi_cpufreq
thermal_sys 18120 4 video,fan,thermal,processor
hwmon 3676 2 thinkpad_acpi,thermal_sys
linux-1hox:/home/antoinette #
Zum Vergrößern anklicken....
Hat jemand eine Idee?

Gruss
Pilus
 
OP
P

pilus

Hacker
In Skype wird die Webcam unter Video angezeigt /dev/video0
Im KMixer wird die Lenovo Webcam auch angezeigt. Also muss sie irgendwie eingerichtet sein. Wenn ich in Skype auf Webcam testen klicke, dann passiert nichts. Habe ich irgendwas nicht aktiviert?
 
T

tomm.fa

Administrator
Teammitglied
Und wenn du Skype mit:
Code: 
LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype
startest? Ansonsten auch mal die Ausgabe von lsusb zeigen; Skype selbst aus der Konsole heraus starten und eventuelle Fehlermeldungen hier zeigen.
 
OP
P

pilus

Hacker
habe skype wie Du gefordert hast in aus der Konsole gestartet. Konnte auch kein Testbild bekommen.
Hier die gewünschten Terminal-Ausgaben:
linux-1hox:/home/antoinette # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 17ef:4802 Lenovo Lenovo Vc0323+MI1310_SOC Camera
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc.
Bus 004 Device 003: ID 0a5c:2145 Broadcom Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
linux-1hox:/home/antoinette # LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype
^C
linux-1hox:/home/antoinette # /usr/sbin/hwinfo --usb
03: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0
Unique ID: k4bc.cO89g+iefn1
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux 2.6.31.12-0.2-default ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.31.12-0.2-default ehci_hcd"
Device: usb 0x0002 "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.7"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

04: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0
Unique ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux 2.6.31.12-0.2-default ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.31.12-0.2-default ehci_hcd"
Device: usb 0x0002 "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.7"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

05: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0
Unique ID: uIhY.MxUuepIFPaE
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux 2.6.31.12-0.2-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.31.12-0.2-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

06: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0
Unique ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: "Linux 2.6.31.12-0.2-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.31.12-0.2-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

07: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_2_if0
Unique ID: 2XnU.uOe2OKugI8D
SysFS ID: /devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: "Linux 2.6.31.12-0.2-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.31.12-0.2-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

08: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0
Unique ID: 7eqy.v+N+B0xY+P6
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0
SysFS BusID: 6-0:1.0
Hardware Class: hub
Model: "Linux 2.6.31.12-0.2-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.31.12-0.2-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

09: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0
Unique ID: BSFT.gkSaZmjGyhD
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0
SysFS BusID: 7-0:1.0
Hardware Class: hub
Model: "Linux 2.6.31.12-0.2-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.31.12-0.2-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

10: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0
Unique ID: FZIx.RTX9xWW_uz4
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0
SysFS BusID: 8-0:1.0
Hardware Class: hub
Model: "Linux 2.6.31.12-0.2-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.31.12-0.2-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Config Status: cfg=new, avail=yes, need=no, active=unknown

11: USB 00.0: 11200 TV Card
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_17ef_4802_noserial_if0
Unique ID: hSuP.fla_BR_rfZ3
Parent ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0
SysFS BusID: 2-2:1.0
Hardware Class: tv card
Model: "Primax Lenovo USB Webcam"
Hotplug: USB
Vendor: usb 0x17ef "Primax"
Device: usb 0x4802 "Lenovo USB Webcam"
Revision: "1.00"
Driver: "vc032x"
Driver Modules: "gspca_vc032x"
Speed: 480 Mbps
Module Alias: "usb:v17EFp4802d0100dc00dsc00dp00icFFisc00ip00"
Driver Info #0:
Driver Status: gspca_vc032x is active
Driver Activation Cmd: "modprobe gspca_vc032x"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)

14: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_8ff_2810_noserial_if0
Unique ID: PYMB.5eI5OwX2Lb4
Parent ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0
SysFS BusID: 4-1:1.0
Hardware Class: unknown
Model: "AuthenTec Fingerprint Sensor"
Hotplug: USB
Vendor: usb 0x08ff "AuthenTec, Inc."
Device: usb 0x2810 "Fingerprint Sensor"
Revision: "17.03"
Speed: 12 Mbps
Module Alias: "usb:v08FFp2810d1703dcFFdscFFdpFFicFFiscFFipFF"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)

15: USB 00.0: 11500 Bluetooth Device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_a5c_2145_noserial_if0
Unique ID: rg_L.8EFls6Kb9sE
Parent ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0
SysFS BusID: 4-2:1.0
Hardware Class: bluetooth
Model: "Broadcom ThinkPad Bluetooth with Enhanced Data Rate II"
Hotplug: USB
Vendor: usb 0x0a5c "Broadcom Corp."
Device: usb 0x2145 "ThinkPad Bluetooth with Enhanced Data Rate II"
Revision: "3.99"
Driver: "btusb"
Driver Modules: "btusb"
Speed: 12 Mbps
Module Alias: "usb:v0A5Cp2145d0399dcE0dsc01dp01icE0isc01ip01"
Driver Info #0:
Driver Status: btusb is active
Driver Activation Cmd: "modprobe btusb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)
linux-1hox:/home/antoinette #
Zum Vergrößern anklicken....
 
OP
P

pilus

Hacker
sieht doch danach aus, dass die CAM-Module geladen sind. Daher müsste die CAM doch funktionieren. Vielleicht muss ich ja nur in einem gui was aktivieren.
 
OP
P

pilus

Hacker
wie es aussieht, ist das ein bekanntes problem mit Kernel 2.6.31 (was ja Opensuse 11.2 hat):
http://www.mail-archive.com/linux-media@vger.kernel.org/msg10754.html

Der Kernelpatch ist mir zu kompliziert. Ich warte lieber auf Opensuse 11.3 mit neuem Kernel. Vermutlich wird es dann ja automatisch funktionieren.

Oder gibt es einen einfach zu installierenden Patch als rpm oder ähnliches?
 
OP
P

pilus

Hacker
nun ist 11.3 raus und ich habe weiterhin das selbe Problem. Die Webcam wird von Skype erkannt. Wenn ich auf Test klicke, dann leuchtet bei der Kamera kurz ein grünes Lämpchen auf, aber ich bekomme kein Bild. An dem oben beschriebenen Kernelproblem kann es wohl nicht mehr sein, dieser Kernel unterstützt ja angeblich diese Cam.
 
OP
P

pilus

Hacker
hier ein aktuelles hwinfo
Passwort:
linux-5q4k:/home/victoria # /usr/sbin/hwinfo --usb
03: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: k4bc.cO89g+iefn1
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default ehci_hcd"
Device: usb 0x0002 "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.7"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: option is not active
Driver Activation Cmd: "modprobe option"
Driver Info #1:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

04: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default ehci_hcd"
Device: usb 0x0002 "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.7"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: option is not active
Driver Activation Cmd: "modprobe option"
Driver Info #1:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

05: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: uIhY.MxUuepIFPaE
SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

06: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

07: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: 2XnU.uOe2OKugI8D
SysFS ID: /devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1a.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

08: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: 7eqy.v+N+B0xY+P6
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0
SysFS BusID: 6-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

09: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: BSFT.gkSaZmjGyhD
SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0
SysFS BusID: 7-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

10: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: FZIx.RTX9xWW_uz4
SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0
SysFS BusID: 8-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:1d.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

11: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: PYMB.5eI5OwX2Lb4
Parent ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0
SysFS BusID: 4-1:1.0
Hardware Class: unknown
Model: "AuthenTec Fingerprint Sensor"
Hotplug: USB
Vendor: usb 0x08ff "AuthenTec, Inc."
Device: usb 0x2810 "Fingerprint Sensor"
Revision: "17.03"
Speed: 12 Mbps
Module Alias: "usb:v08FFp2810d1703dcFFdscFFdpFFicFFiscFFipFF"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)

12: USB 00.0: 11500 Bluetooth Device
[Created at usb.122]
Unique ID: rg_L.8EFls6Kb9sE
Parent ID: zPk0.7gZT0a5zLs5
SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0
SysFS BusID: 4-2:1.0
Hardware Class: bluetooth
Model: "Broadcom ThinkPad Bluetooth with Enhanced Data Rate II"
Hotplug: USB
Vendor: usb 0x0a5c "Broadcom Corp."
Device: usb 0x2145 "ThinkPad Bluetooth with Enhanced Data Rate II"
Revision: "3.99"
Driver: "btusb"
Driver Modules: "btusb"
Speed: 12 Mbps
Module Alias: "usb:v0A5Cp2145d0399dcE0dsc01dp01icE0isc01ip01"
Driver Info #0:
Driver Status: btusb is active
Driver Activation Cmd: "modprobe btusb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)

16: USB 00.0: 11200 TV Card
[Created at usb.122]
Unique ID: hSuP.fla_BR_rfZ3
Parent ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0
SysFS BusID: 2-2:1.0
Hardware Class: tv card
Model: "Primax Lenovo USB Webcam"
Hotplug: USB
Vendor: usb 0x17ef "Primax"
Device: usb 0x4802 "Lenovo USB Webcam"
Revision: "1.00"
Driver: "vc032x"
Driver Modules: "gspca_vc032x"
Speed: 480 Mbps
Module Alias: "usb:v17EFp4802d0100dc00dsc00dp00icFFisc00ip00"
Driver Info #0:
Driver Status: gspca_vc032x is active
Driver Activation Cmd: "modprobe gspca_vc032x"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)
linux-5q4k:/home/victoria #
Zum Vergrößern anklicken....
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben