[doch wieder] Wacom Intuos4 in 11.2-64bit ?

p5:~ # rpm -qa |grep wacom
wacom-kmp-desktop-0.8.1_2.6.31.5_0.1-7.4.x86_64
x11-input-wacom-tools-0.8.5-4.1.x86_64
x11-input-wacom-0.8.5-4.1.x86_64
p5:~ #

p5:~ # tail -f /var/log/messages
Jan 11 22:28:29 p5 kernel: [13119.454031] usb 6-2: USB disconnect, address 2
Jan 11 22:28:43 p5 kernel: [13133.483009] usb 6-2: new full speed USB device using uhci_hcd and address 3
Jan 11 22:28:43 p5 kernel: [13133.629243] usb 6-2: New USB device found, idVendor=056a, idProduct=00ba
Jan 11 22:28:43 p5 kernel: [13133.629249] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 11 22:28:43 p5 kernel: [13133.629253] usb 6-2: Product: PTK-840
Jan 11 22:28:43 p5 kernel: [13133.629255] usb 6-2: Manufacturer: Tablet
Jan 11 22:28:43 p5 kernel: [13133.629337] usb 6-2: configuration #1 chosen from 1 choice

p5:~ # hwinfo --mouse
43: USB 00.0: 10503 USB Mouse
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_56a_ba_noserial_if0
  Unique ID: +u4I.ZSv_Li_L5s4
  Parent ID: 7eqy.v+N+B0xY+P6
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0
  SysFS BusID: 6-2:1.0
  Hardware Class: mouse
  Model: "Wacom PTK-840"
  Hotplug: USB
  Vendor: usb 0x056a "Wacom Co., Ltd"
  Device: usb 0x00ba "PTK-840"
  Revision: "1.04"
  Compatible to: int 0x0200 0x0001 "Generic USB Mouse"
  Speed: 12 Mbps
  Module Alias: "usb:v056Ap00BAd0104dc00dsc00dp00ic03isc01ip02"
  Driver Info #0:
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #39 (Hub)

# udev rules for wacom tablets.
# These rules were compiled for the Debian GNU/Linux distribution,
# but others may, and indeed are encouraged to, use them also.
#
# Should you do so, PLEASE CO-ORDINATE ANY CHANGES OR ADDITIONS
# of new devices with Ron  so that we can try
# to present users with a standard set of device nodes
# which they can rely on across the board.

KERNEL!="event[0-9]*", GOTO="wacom_end"

# Port specific link for users of multiple tablets of the same type.
# The ID_PATH variable is set by the "path_id" script in an earlier rule file.
ATTRS{idVendor}=="056a", ENV{ID_PATH}=="?*", SYMLINK="input/by-path/$env{ID_PATH}-wacom"

# Multiple interface support for stylus and touch devices.
DRIVERS=="wacom", ATTRS{bInterfaceNumber}=="00", ENV{WACOM_TYPE}="stylus"
DRIVERS=="wacom", ATTRS{bInterfaceNumber}=="01", ENV{WACOM_TYPE}="touch"

# Type-named links for multiple tablets.  If you want to use multiple
# tablets of the _same_ type, you will probably need to use the links
# from /dev/input/by-path to identify which is plugged into what usb
# port.  For different tablet types though, just pick your links from
# the list below.
#
# We override SYMLINK for tabletpc devices because the by-path link
# is not required with such devices, there will only ever be one.
.
.
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00ba", SYMLINK+="input/tablet-intuos4-8x13"
.
.
# Convenience links for the common case of a single tablet.  We could do just this:
#ATTRS{idVendor}=="056a", SYMLINK+="input/wacom-$env{WACOM_TYPE}"
# but for legacy reasons, we keep the input/wacom link as the generic stylus device.
ATTRS{idVendor}=="056a", ENV{WACOM_TYPE}!="touch", SYMLINK+="input/wacom"
ATTRS{idVendor}=="056a", ENV{WACOM_TYPE}=="touch", SYMLINK+="input/wacom-touch"

# Check and repossess the device if a module other than the wacom one
# is already bound to it.
ATTRS{idVendor}=="056a", ACTION=="add", RUN+="check_driver wacom $devpath $env{ID_BUS}"

LABEL="wacom_end"

<?xml version="1.0" encoding="ISO-8859-1"?>


<deviceinfo version="0.2">
  
  <device>
    <match key="input.originating_device" contains="if0">
      <match key="info.product" contains="Wacom">
	<merge key="input.x11_driver" type="string">wacom</merge>
	<merge key="input.x11_options.Type" type="string">stylus</merge>
	<append key="info.callouts.add" type="strlist">hal-setup-wacom</append>
	<append key="wacom.types" type="strlist">eraser</append>
	<append key="wacom.types" type="strlist">cursor</append>
	<append key="wacom.types" type="strlist">pad</append>
        
        <match key="info.udi" contains="e2">
          <merge key="input.x11_options.Type" type="string">touch</merge>
        </match>
      </match>
    </match>
  </device>
  
  <device>
    <match key="input.originating_device" contains="if1">
      <match key="info.product" contains="Wacom">
        <merge key="input.x11_driver" type="string">wacom</merge>
        <merge key="input.x11_options.Type" type="string">touch</merge>
        
	<append key="info.callouts.add" type="strlist">hal-setup-wacom</append>
	<append key="wacom.types" type="strlist">pad</append>
      </match>
    </match>
  </device>
  
  <device>
    <match key="info.capabilities" contains="serial">
      <match key="@info.parent:pnp.id" contains_outof="WACf;FUJ02e5;FUJ02e7">
	<append key="info.capabilities" type="strlist">input</append>
	<merge key="input.x11_driver" type="string">wacom</merge>
	<merge key="input.x11_options.Type" type="string">stylus</merge>
	<merge key="input.x11_options.ForceDevice" type="string">ISDV4</merge>
	<merge key="input.device" type="copy_property">serial.device</merge>
	<append key="info.callouts.add" type="strlist">hal-setup-wacom</append>
	<append key="wacom.types" type="strlist">eraser</append>
	<append key="wacom.types" type="strlist">cursor</append>
	
        <match key="@info.parent:pnp.id" contains_outof="WACf008;WACf009;WACf010;WACf008A;WACf00B;WACf00C;WACf00D;WACf00E;FUJ02e7">
	  <append key="wacom.types" type="strlist">touch</append>
	</match>
        
        <match key="@info.parent:pnp.id" contains_outof="WACf008">
          <merge key="input.x11_options.BaudRate" type="string">38400</merge>
        </match>
      </match>
    </match>
  </device>
  
  <device>
    <match key="info.capabilities" contains="input.mouse">
      <match key="info.product" contains="WACOM">
        <match key="info.product" contains="Tablet">
          <merge key="input.x11_driver" type="string">wacom</merge>
          <merge key="input.x11_options.Type" type="string">stylus</merge>
	  <append key="info.callouts.add" type="strlist">hal-setup-wacom</append>
	  <append key="wacom.types" type="strlist">eraser</append>
	  <append key="wacom.types" type="strlist">cursor</append>
        </match>
      </match>
    </match>
  </device>
  
  <device>
    <match key="info.udi" contains_not="subdev_0">
    <match key="info.udi" contains_not="subdev_1">
    <match key="info.udi" contains_not="subdev_2">
      <match key="input.x11_options.Type" contains="stylus">
        <merge key="info.product" type="string">stylus</merge>
      </match>
      <match key="input.x11_options.Type" contains="eraser">
        <merge key="info.product" type="string">eraser</merge>
      </match>
      <match key="input.x11_options.Type" contains="cursor">
        <merge key="info.product" type="string">cursor</merge>
      </match>
      <match key="input.x11_options.Type" contains="pad">
        <merge key="info.product" type="string">pad</merge>
      </match>
      <match key="input.x11_options.Type" contains="touch">
        <merge key="info.product" type="string">touch</merge>
      </match>
    </match>
    </match>
    </match>
  </device>
</deviceinfo>

"ServerLayout"
	Option "AutoAddDevices" "no"
...

(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules//input/wacom_drv.so
dlopen: /usr/lib/xorg/modules//input/wacom_drv.so: undefined symbol: xf86errno
(EE) Failed to load /usr/lib/xorg/modules//input/wacom_drv.so
(II) UnloadModule: "wacom"
(EE) Failed to load module "wacom" (loader failed, 7)