• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst]Drucker am Parallelport kan nicht installiert werden

Emanuele

Member
Hallo Leute. Hab nach der Installation eines Rechners (Suse 11.0) an den ein HP 4250tn per Parallelport angeschlossen werden soll ein Problem.
Der Parallelport wird deaktiviert (var/log/messages).
/dev/lp0 ist vorhanden.
Code:
dmesg | grep parport
parport 0: PC-style at 0x37, irq -569696632 [PCSPP, TRISTATE, EPP]
parport0: irq -569696632 in use, resorting to polled operation
lp0: using parport0 (polling)

Woran liegt es das der ParPort deaktiviert wird? Und was kann ich machen um den Drucker zu installieren?

/var/log/messages | grep parport
Code:
Jan  7 13:14:29 linux kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan  7 13:14:29 linux kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan  7 13:14:29 linux kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan  7 13:14:29 linux kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan  7 13:14:29 linux kernel: lp0: using parport0 (polling).
Jan  7 13:14:29 linux kernel: parport_pc 00:0b: activated
Jan  7 13:14:29 linux kernel: parport_pc 00:0b: reported by Plug and Play ACPI
Jan  7 13:14:29 linux kernel: parport_pc 00:0b: disabled
Jan  7 16:58:42 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 16:58:42 linux-pc kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan  7 16:58:42 linux-pc kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan  7 16:58:42 linux-pc kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan  7 16:58:42 linux-pc kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan  7 16:58:42 linux-pc kernel: lp0: using parport0 (polling).
Jan  7 16:58:42 linux-pc kernel: parport_pc 00:0d: activated
Jan  7 16:58:42 linux-pc kernel: parport_pc 00:0d: reported by Plug and Play ACPI
Jan  7 16:58:42 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 17:01:16 linux-pc kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan  7 17:01:16 linux-pc kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan  7 17:01:16 linux-pc kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan  7 17:01:16 linux-pc kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan  7 17:01:16 linux-pc kernel: lp0: using parport0 (polling).
Jan  7 17:01:16 linux-pc kernel: parport_pc 00:0d: activated
Jan  7 17:01:16 linux-pc kernel: parport_pc 00:0d: reported by Plug and Play ACPI
Jan  7 17:01:16 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 17:18:57 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 17:18:58 linux-pc kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan  7 17:18:58 linux-pc kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan  7 17:18:58 linux-pc kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan  7 17:18:58 linux-pc kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan  7 17:18:58 linux-pc kernel: lp0: using parport0 (polling).
Jan  7 17:18:58 linux-pc kernel: parport_pc 00:0d: activated
Jan  7 17:18:58 linux-pc kernel: parport_pc 00:0d: reported by Plug and Play ACPI
Jan  7 17:18:58 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 17:24:55 linux-pc kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan  7 17:24:55 linux-pc kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan  7 17:24:55 linux-pc kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan  7 17:24:55 linux-pc kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan  7 17:24:56 linux-pc kernel: lp0: using parport0 (polling).
Jan  7 17:24:56 linux-pc kernel: parport_pc 00:0d: activated
Jan  7 17:24:56 linux-pc kernel: parport_pc 00:0d: reported by Plug and Play ACPI
Jan  7 17:24:56 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 17:25:47 linux-pc kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan  7 17:25:47 linux-pc kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan  7 17:25:47 linux-pc kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan  7 17:25:47 linux-pc kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan  7 17:25:47 linux-pc kernel: lp0: using parport0 (polling).
Jan  7 17:25:47 linux-pc kernel: parport_pc 00:0d: activated
Jan  7 17:25:47 linux-pc kernel: parport_pc 00:0d: reported by Plug and Play ACPI
Jan  7 17:25:47 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 17:36:29 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 17:36:29 linux-pc kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan  7 17:36:29 linux-pc kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan  7 17:36:29 linux-pc kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan  7 17:36:29 linux-pc kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan  7 17:36:29 linux-pc kernel: lp0: using parport0 (polling).
Jan  7 17:36:29 linux-pc kernel: parport_pc 00:0d: activated
Jan  7 17:36:29 linux-pc kernel: parport_pc 00:0d: reported by Plug and Play ACPI
Jan  7 17:36:29 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 17:43:36 linux-pc kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan  7 17:43:36 linux-pc kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan  7 17:43:36 linux-pc kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan  7 17:43:36 linux-pc kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan  7 17:43:36 linux-pc kernel: lp0: using parport0 (polling).
Jan  7 17:43:36 linux-pc kernel: parport_pc 00:0d: activated
Jan  7 17:43:36 linux-pc kernel: parport_pc 00:0d: reported by Plug and Play ACPI
Jan  7 17:43:36 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 17:47:00 linux-pc kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan  7 17:47:00 linux-pc kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan  7 17:47:00 linux-pc kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan  7 17:47:00 linux-pc kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan  7 17:47:00 linux-pc kernel: lp0: using parport0 (polling).
Jan  7 17:47:00 linux-pc kernel: parport_pc 00:0d: activated
Jan  7 17:47:00 linux-pc kernel: parport_pc 00:0d: reported by Plug and Play ACPI
Jan  7 17:47:00 linux-pc kernel: parport_pc 00:0d: disabled
Jan  7 17:48:09 linux-pc kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan  7 17:48:09 linux-pc kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan  7 17:48:09 linux-pc kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan  7 17:48:09 linux-pc kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan  7 17:48:09 linux-pc kernel: lp0: using parport0 (polling).
Jan  7 17:48:09 linux-pc kernel: parport_pc 00:0d: activated
Jan  7 17:48:09 linux-pc kernel: parport_pc 00:0d: reported by Plug and Play ACPI
Jan  7 17:48:09 linux-pc kernel: parport_pc 00:0d: disabled
Jan  8 09:33:00 linux-pc kernel: lp0: using parport0 (polling).
Jan  8 09:53:07 linux-pc kernel: lp0: using parport0 (polling).
 
OP
E

Emanuele

Member
Hab die Lösung im thread http://www.linux-club.de/viewtopic.php?f=42&t=98029&start=0 gefunden.
Allerdings habe ich jetzt wieder ein anderes Problem...
Der Drucker empfängt die Daten und bleibt dabei hängen. Es steht da "Job wird verarbeitet" und da stehts minutenlang bis ich den Job abbreche. Dann spuckt er ein paar Zeilen aus, die aber nichts mit dem eigentlichen Druck zu tun haben.

Ich habe Probehalber einen anderen HP 4250tn angeschlossen und mit dem wird wunderbar alles ausgedruckt. Ich bin mit meinem Latein am Ende. Wenns bei dem einen geht müsste es doch bei dem anderen auch gehen.

Der Drucker ist auch nicht kaputt, da er mit dem alten Rechner wunderbar funktioniert.

Ich weiss auch nicht wie ich in so einem Fall vorgehen muss um den Fehler ausfindig zu machen.
Wäre toll wenn ihr mir ein paar Befehle an die Hand geben würdet damit ich da weiter komme.
 

Tooltime

Advanced Hacker
Da es scheinbar am Drucker liegt, würde ich mal die Einstellungen kontrollieren. Auf beiden Druckern mal die Status/Konfig/Selbsttestseite oder wie das Ding heißt ausdrucken. Ich meine die Seite wo Firmwareversion, Anzahl der Druckseiten, installierter Speicher, ... drauf steht.

Vielleicht hat die Schnittstellte ja einen Defekt,
Emanuele schrieb:
mal über Netzwerk gedruckt.
 
OP
E

Emanuele

Member
Ja hab den Drucker übers Netzwerk angesteuert und da funktioniert er einwandfrei.

Das bleibt jetzt auch so.
Danke.
 
Oben