• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] Nokia N73 Bilder auf openSuse 11.1 übertragen?

D

Daniel_17

Hacker
Hallo ich habe ein Nokia N73 mit dem ich ab und zu ein paar Bilder mache. Sicher wäre ne Kamera Besser aber das Handy hat man halt immer dabei.

Wie krieg ich die Bilder in openSuse 11.1 zuerst dachte ich mir mit dem Dateimodus müsste das doch ganz einfach ohne Software gehen. Denkste wenn ich das Handy per USB an den Rechner anschließe. Passiert gar nix. Weder auf dem Handy Bildschirm noch beim Rechner.

Woran liegt das? Unter Windows habe ich das gerade auch getestet dort wird es als externer Datenträger gefunden.

vielleicht kann mir jemand einen Tipp geben.

Gruß Daniel
 
L

lOtz1009

Moderator
Teammitglied
Ich hab ein 6233 (noch aus der Zeit VOR Nokias "Umzug" ;)) mal irgendwie unter Suse 10.3 erfolgreich verbinden können. Muss daheim in meinem Sammelsurium mal nachschauen.

Gib aber mal in einer Konsole
Code: 
tail -f /var/log/messages
ein und schließ dann das Handy an. Vielleicht kommen wir so an ein paar brauchbare Meldungen...
 
OP
D

Daniel_17

Hacker
Das kommt dabei raus

Code: 
linux-0h0f:/home/daniel # tail -f /var/log/messages
May 15 13:44:15 linux-0h0f kernel: CE: hpet increasing min_delta_ns to 22500 nsec
May 15 13:44:25 linux-0h0f vmnetBridge: RTM_NEWLINK: name:wlan0 index:4 flags:0x00011043
May 15 13:44:25 linux-0h0f vmnetBridge: Can't add interface wlan0 4 (does exist).
May 15 13:45:38 linux-0h0f kernel: /dev/vmnet: open called by PID 11579 (vmware-vmx)
May 15 13:45:38 linux-0h0f kernel: /dev/vmnet: port on hub 8 successfully opened
May 15 13:45:46 linux-0h0f kernel: vmmon: Had to deallocate locked 262418 pages from vm driver f5b8ea00
May 15 13:45:46 linux-0h0f kernel: vmmon: Had to deallocate AWE 4381 pages from vm driver f5b8ea00
May 15 13:46:25 linux-0h0f vmnetBridge: RTM_NEWLINK: name:wlan0 index:4 flags:0x00011043
May 15 13:46:25 linux-0h0f vmnetBridge: Can't add interface wlan0 4 (does exist).
May 15 13:48:06 linux-0h0f su: (to root) daniel on /dev/pts/1
May 15 13:48:25 linux-0h0f vmnetBridge: RTM_NEWLINK: name:wlan0 index:4 flags:0x00011043
May 15 13:48:25 linux-0h0f vmnetBridge: Can't add interface wlan0 4 (does exist).
 
L

lOtz1009

Moderator
Teammitglied
Also quasi gar nix :D
Hast du am Handy mal Standardmodus und Datenspeicher probiert (wenns das bei dem auch gibt)?
Ich denke mal es wird auch bei
Code: 
lsusb
nicht angegeben wenns per Kabel dranhängt.
Ich hatte meins per Bluetooth verbunden.
 
OP
D

Daniel_17

Hacker
Nein das Hilft auch nix.

Normal merkt das Handy wenn es per USB angeschlossen wird und frägt nach dem Modus. Habe das jetzt mal Manuell eingestellt am Handy aber das bringt auch nix. Gerade so als würde man gar nichts anschließen.
 
OP
D

Daniel_17

Hacker
Also jetzt komm ich nimmer mit. Hab gerade das Handy eingesteckt per USB und läuft. Entweder Glück oder Zufall.
Kann mir das nicht gerklären. Jetzt hab ich das X-Mal probiert.
Folgendes wird angezeigt

Code: 
linux-0h0f:/home/daniel # hwinfo --usb
02: SCSI 300.0: 10600 Disk                                      
  [Created at block.254]
  UDI: /org/freedesktop/Hal/devices/storage_serial_Brother_DCP_135C_BROK7F796837_0_0
  Unique ID: u9fR.qZSI+MPyCy5
  SysFS ID: /class/block/sdb
  SysFS BusID: 3:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5.3/4-5.3:1.2/host3/target3:0:0/3:0:0:0
  Hardware Class: disk
  Model: "Brother DCP-135C"
  Vendor: usb 0x04f9 "Brother"
  Device: usb 0x01ce "DCP-135C"
  Revision: "1.00"
  Serial ID: "BROK7F796837"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage"
  Device File: /dev/sdb (/dev/sg1)
  Device Files: /dev/sdb, /dev/disk/by-id/usb-Brother_DCP-135C_BROK7F796837-0:0, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:5.3:1.2-scsi-0:0:0:0
  Device Number: block 8:16-8:31 (char 21:1)
  Features: Hotpluggable
  Geometry (Logical): CHS 1024/0/62
  Speed: 12 Mbps
  Module Alias: "usb:v04F9p01CEd0100dc00dsc00dp00ic08isc06ip50"
  Driver Info #0:
    Driver Status: usb_storage is active
    Driver Activation Cmd: "modprobe usb_storage"
  Drive status: no medium
  Config Status: cfg=no, avail=yes, need=no, active=unknown

04: SCSI 600.0: 10600 Disk
  [Created at block.243]
  UDI: /org/freedesktop/Hal/devices/storage_serial_Nokia_Nokia_N73_358634019372055_0_0
  Unique ID: 2jVo.I9kRIM0zpHD
  SysFS ID: /class/block/sdc
  SysFS BusID: 6:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/host6/target6:0:0/6:0:0:0
  Hardware Class: disk
  Model: "Disk"
  Vendor: usb 0x0421 
  Device: usb 0x0487 
  Serial ID: "358634019372055"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage"
  Device File: /dev/sdc (/dev/sg3)
  Device Files: /dev/sdc, /dev/disk/by-id/usb-Nokia_Nokia_N73_358634019372055-0:0, /dev/disk/by-path/pci-0000:00:1d.2-usb-0:2:1.0-scsi-0:0:0:0, /dev/disk/by-uuid/2C5A-F296
  Device Number: block 8:32-8:47 (char 21:3)
  Features: Hotpluggable
  Geometry (Logical): CHS 1010/16/62
  Size: 1002262 sectors a 512 bytes
  Speed: 12 Mbps
  Module Alias: "usb:v0421p0487d0100dc00dsc00dp00ic08isc06ip50"
  Driver Info #0:
    Driver Status: usb_storage is active
    Driver Activation Cmd: "modprobe usb_storage"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

05: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1a_7_if0
  Unique ID: k4bc.cO89g+iefn1
  SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0
  SysFS BusID: 1-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.27.21-0.1-default ehci_hcd EHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.27.21-0.1-default ehci_hcd"
  Device: usb 0x0002 "EHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1a.7"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

06: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0_if0
  Unique ID: pBe4.MxUuepIFPaE
  SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb2/2-0:1.0
  SysFS BusID: 2-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.27.21-0.1-default uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.27.21-0.1-default uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1a.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

07: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_1_if0
  Unique ID: uIhY.7gZT0a5zLs5
  SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb3/3-0:1.0
  SysFS BusID: 3-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.27.21-0.1-default uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.27.21-0.1-default uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1a.1"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

08: USB 00.0: 0000 Unclassified device
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_4f2_b008_SN0001_if0
  Unique ID: 2UT6._4tiTDfC4I1
  Parent ID: k4bc.cO89g+iefn1
  SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0
  SysFS BusID: 1-3:1.0
  Hardware Class: unknown
  Model: "Chicony Electronics Chicony USB 2.0 Camera"
  Hotplug: USB
  Vendor: usb 0x04f2 "Chicony Electronics Co., Ltd"
  Device: usb 0xb008 "Chicony USB 2.0 Camera"
  Revision: "3.35"
  Serial ID: "SN0001"
  Driver: "uvcvideo"
  Driver Modules: "uvcvideo"
  Device File: /dev/input/input11
  Speed: 480 Mbps
  Module Alias: "usb:v04F2pB008d0335dcEFdsc02dp01ic0Eisc01ip00"
  Driver Info #0:
    Driver Status: uvcvideo is active
    Driver Activation Cmd: "modprobe uvcvideo"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #5 (Hub)

10: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0
  Unique ID: zPk0.9T1GDCLyFd9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb4/4-0:1.0
  SysFS BusID: 4-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.27.21-0.1-default ehci_hcd EHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.27.21-0.1-default ehci_hcd"
  Device: usb 0x0002 "EHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.7"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

11: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0
  Unique ID: 2XnU.v+N+B0xY+P6
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0
  SysFS BusID: 5-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.27.21-0.1-default uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.27.21-0.1-default uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.0"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

12: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0
  Unique ID: 7eqy.gkSaZmjGyhD
  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0
  SysFS BusID: 6-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.27.21-0.1-default uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.27.21-0.1-default uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.1"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

13: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_5e3_608_noserial_if0
  Unique ID: 94tr.d7FDLX76qXB
  Parent ID: zPk0.9T1GDCLyFd9
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5:1.0
  SysFS BusID: 4-5:1.0
  Hardware Class: hub
  Model: "Genesys Logic USB2.0 Hub"
  Hotplug: USB
  Vendor: usb 0x05e3 "Genesys Logic, Inc."
  Device: usb 0x0608 "USB2.0 Hub"
  Revision: "9.01"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 480 Mbps
  Module Alias: "usb:v05E3p0608d0901dc09dsc00dp01ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #10 (Hub)

14: USB 00.0: 10a00 Hub
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0
  Unique ID: BSFT.RTX9xWW_uz4
  SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0
  SysFS BusID: 7-0:1.0
  Hardware Class: hub
  Model: "Linux 2.6.27.21-0.1-default uhci_hcd UHCI Host Controller"
  Hotplug: USB
  Vendor: usb 0x1d6b "Linux 2.6.27.21-0.1-default uhci_hcd"
  Device: usb 0x0001 "UHCI Host Controller"
  Revision: "2.06"
  Serial ID: "0000:00:1d.2"
  Driver: "hub"
  Driver Modules: "usbcore"
  Speed: 12 Mbps
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

15: USB 00.0: 10503 USB Mouse
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_46d_c018_noserial_if0
  Unique ID: 6Yuz.T_o_W6hl6R0
  Parent ID: 94tr.d7FDLX76qXB
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5.1/4-5.1:1.0
  SysFS BusID: 4-5.1:1.0
  Hardware Class: mouse
  Model: "Logitech USB Optical Mouse"
  Hotplug: USB
  Vendor: usb 0x046d "Logitech, Inc."
  Device: usb 0xc018 "USB Optical Mouse"
  Revision: "43.01"
  Compatible to: int 0x0210 0x0013
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/mice (/dev/input/mouse2)
  Device Files: /dev/input/mice, /dev/input/mouse2, /dev/input/event3, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse, /dev/input/by-path/pci-0000:00:1d.7-usb-0:5.1:1.0-event-mouse, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse, /dev/input/by-path/pci-0000:00:1d.7-usb-0:5.1:1.0-mouse
  Device Number: char 13:63 (char 13:34)
  Speed: 1.5 Mbps
  Module Alias: "usb:v046DpC018d4301dc00dsc00dp00ic03isc01ip02"
  Driver Info #0:
    Buttons: 3
    Wheels: 1
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #13 (Hub)

16: USB 00.0: 10800 Keyboard
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_5d5_6782_noserial_if0
  Unique ID: YgW8.Qa3o7hr4La4
  Parent ID: 94tr.d7FDLX76qXB
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5.2/4-5.2:1.0
  SysFS BusID: 4-5.2:1.0
  Hardware Class: keyboard
  Model: "Super Gate KEYBOARD"
  Hotplug: USB
  Vendor: usb 0x05d5 "Super Gate Technology Co., Ltd"
  Device: usb 0x6782 "KEYBOARD"
  Revision: "1.01"
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/input4
  Speed: 1.5 Mbps
  Module Alias: "usb:v05D5p6782d0101dc00dsc00dp00ic03isc01ip01"
  Driver Info #0:
    XkbRules: xfree86
    XkbModel: pc104
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #13 (Hub)

17: USB 00.1: 10503 USB Mouse
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_5d5_6782_noserial_if1
  Unique ID: +rmC.LE8Con_3v59
  Parent ID: 94tr.d7FDLX76qXB
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5.2/4-5.2:1.1
  SysFS BusID: 4-5.2:1.1
  Hardware Class: mouse
  Model: "Super Gate KEYBOARD"
  Hotplug: USB
  Vendor: usb 0x05d5 "Super Gate Technology Co., Ltd"
  Device: usb 0x6782 "KEYBOARD"
  Revision: "1.01"
  Compatible to: int 0x0200 0x0001 "Generic USB Mouse"
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/input5
  Speed: 1.5 Mbps
  Module Alias: "usb:v05D5p6782d0101dc00dsc00dp00ic03isc01ip02"
  Driver Info #0:
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #13 (Hub)

18: USB 00.0: 10900 Printer
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_4f9_1ce_BROK7F796837_if0_printer_noserial
  Unique ID: _o8J.+MAvulYjWh5
  Parent ID: 94tr.d7FDLX76qXB
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5.3/4-5.3:1.0
  SysFS BusID: 4-5.3:1.0
  Hardware Class: printer
  Model: "Brother DCP-135C"
  Hotplug: USB
  Vendor: usb 0x04f9 "Brother Industries, Ltd"
  Device: usb 0x01ce 
  SubVendor: "Brother"
  SubDevice: "DCP-135C"
  Revision: "1.00"
  Serial ID: "BROK7F796837"
  Driver: "usblp"
  Driver Modules: "usblp"
  Device File: /dev/usb/lp0
  Device Files: /dev/usb/lp0, /dev/usblp0, /dev/par0
  Device Number: char 180:0
  Speed: 12 Mbps
  Module Alias: "usb:v04F9p01CEd0100dc00dsc00dp00ic07isc01ip02"
  Driver Info #0:
    Driver Status: usblp is active
    Driver Activation Cmd: "modprobe usblp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #13 (Hub)

19: USB 00.1: 0000 Unclassified device
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_4f9_1ce_BROK7F796837_if1
  Unique ID: R_ON.z9Ar2asYf30
  Parent ID: 94tr.d7FDLX76qXB
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5.3/4-5.3:1.1
  SysFS BusID: 4-5.3:1.1
  Hardware Class: unknown
  Model: "Brother Industries Unclassified device"
  Hotplug: USB
  Vendor: usb 0x04f9 "Brother Industries, Ltd"
  Device: usb 0x01ce 
  Revision: "1.00"
  Serial ID: "BROK7F796837"
  Speed: 12 Mbps
  Module Alias: "usb:v04F9p01CEd0100dc00dsc00dp00icFFiscFFipFF"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #13 (Hub)

21: USB 00.0: 0000 Unclassified device
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_4e6_5117_21120813306785_if0
  Unique ID: QxmT.tspPor7DQIF
  Parent ID: 94tr.d7FDLX76qXB
  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5.4/4-5.4:1.0
  SysFS BusID: 4-5.4:1.0
  Hardware Class: unknown
  Model: "SCM Microsystems SCR3320 - Smart Card Reader"
  Hotplug: USB
  Vendor: usb 0x04e6 "SCM Microsystems, Inc."
  Device: usb 0x5117 "SCR3320 - Smart Card Reader"
  Revision: "5.21"
  Serial ID: "21120813306785"
  Speed: 12 Mbps
  Module Alias: "usb:v04E6p5117d0521dc00dsc00dp00ic0Bisc00ip00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #13 (Hub)
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben