[gelöst] Canon MP190 Scanner wird nicht erkannt

error: Failed dependencies:
libusb is needed by scangearmp-common-1.20-1.i386

Zum Vergrößern anklicken....

libusb-0_1-4-0.1.12-136.10
libusb-1_0-0-0.9.3-4.20
libusbpp-0_1-4-0.1.12-136.10
libusb-0_1-5-0.99.9.2-7.6

Zum Vergrößern anklicken....

lsusb schrieb:

Bus 005 Device 004: ID 04a9:1734 Canon, Inc.

Zum Vergrößern anklicken....

hwinfo --usb schrieb:

13: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_4a9_1734_9226A0_if0
Unique ID: wn1q.gzpKFPv_N+C
Parent ID: 2XnU.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2:1.0
SysFS BusID: 5-2:1.0
Hardware Class: unknown
Model: "Canon MP190 series"
Hotplug: USB
Vendor: usb 0x04a9 "Canon"
Device: usb 0x1734 "MP190 series"
Revision: "1.01"
Serial ID: "9226A0"
Speed: 480 Mbps
Module Alias: "usb:v04A9p1734d0101dc00dsc00dp00icFFisc00ipFF"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (Hub)

14: USB 00.1: 10900 Printer
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_4a9_1734_9226A0_if1_printer_noserial
Unique ID: NzHu.CI7YP+GV+L0
Parent ID: 2XnU.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2:1.1
SysFS BusID: 5-2:1.1
Hardware Class: printer
Model: "Canon MP190 series"
Hotplug: USB
Vendor: usb 0x04a9 "Canon"
Device: usb 0x1734 "MP190 series"
Revision: "1.01"
Serial ID: "9226A0"
Driver: "usblp"
Driver Modules: "usblp"
Device File: /dev/usb/lp0
Device Files: /dev/usb/lp0, /dev/usblp0, /dev/par0
Device Number: char 180:0
Speed: 480 Mbps
Module Alias: "usb:v04A9p1734d0101dc00dsc00dp00ic07isc01ip02"
Driver Info #0:
Driver Status: usblp is active
Driver Activation Cmd: "modprobe usblp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (Hub)

Zum Vergrößern anklicken....