[gelöst] HVR-3000 tv-karte hat bild aber kein sound

hab es jetzt endlich geschafft meine hvr-3000 zum laufen zu bringen aber mußte leider feststellen das ich keinen ton zum bild hab.

da unter 11.1 meine soundkarte so und so bischen spinnte hab ich nochmal 11.0 installiert aber da hab ich auch keinen ton

der alte beitrag der die karte zum laufen gebracht hat ist unter

http://www.linux-club.de/viewtopic.php?f=27&t=100884

zu finden.


ich hoffe es ist nur ne einstellungs sache vielleicht hat ja jemand eine idee

ahja hier mal ein lspci

00:00.0 Host bridge: Intel Corporation Eaglelake DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Eaglelake PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation ICH10 USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation ICH10 USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation ICH10 USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation ICH10 USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation ICH10 HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation ICH10 PCI Express Port 1
00:1c.1 PCI bridge: Intel Corporation ICH10 PCI Express Port 2
00:1c.5 PCI bridge: Intel Corporation ICH10 PCI Express Port 6
00:1d.0 USB Controller: Intel Corporation ICH10 USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation ICH10 USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation ICH10 USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation ICH10 USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation ICH10 LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation ICH10 4 port SATA IDE Controller
00:1f.3 SMBus: Intel Corporation ICH10 SMBus Controller
00:1f.5 IDE interface: Intel Corporation ICH10 2 port SATA IDE Controller
01:00.0 VGA compatible controller: nVidia Corporation Device 0612 (rev a2)
02:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
05:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
05:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
05:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
05:00.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
05:06.0 Network controller: RaLink RT2561/RT61 802.11g PCI
linux-p0an:/home/luke #


dmesg

hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
cx2388x alsa driver version 0.0.6 loaded
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53,insmod option], frontend(s): 2
cx88[0]: TV tuner type 63, Radio tuner type -1
cx88[0]: Test OK
cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
wlan0 renamed to wlan1
udev: renamed network interface wlan0 to wlan1
tuner' 1-0043: chip found @ 0x86 (cx88[0])
tda9887 1-0043: creating new instance
tda9887 1-0043: tda988[5/6/7] found
tuner' 1-0061: chip found @ 0xc2 (cx88[0])
tuner' 1-0063: chip found @ 0xc6 (cx88[0])
tveeprom 1-0050: Hauppauge model 14109, rev B3D3, serial# 5216759
tveeprom 1-0050: MAC address is 00-0D-FE-4F-99-F7
tveeprom 1-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
tveeprom 1-0050: audio processor is CX882 (idx 33)
tveeprom 1-0050: decoder processor is CX882 (idx 25)
tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=14109
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner)
input: cx88 IR (Hauppauge WinTV-HVR300 as /devices/pci0000:00/0000:00:1e.0/0000:05:00.2/input/input6
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:05:00.2[A] -> GSI 16 (level, low) -> IRQ 16
cx88[0]/2: found at 0000:05:00.2, rev: 5, irq: 16, latency: 64, mmio: 0xfb000000
ACPI: PCI Interrupt 0000:05:00.1[A] -> GSI 16 (level, low) -> IRQ 16
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
cx88[0]/0: found at 0000:05:00.0, rev: 5, irq: 16, latency: 64, mmio: 0xfd000000
wm8775' 1-001b: chip found @ 0x36 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 2 frontend(s)
CX24123: detected CX24123
tuner-simple 1-0061: attaching existing instance
tuner-simple 1-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead
DVB: registering new adapter (cx88[0])
DVB: registering adapter 0 frontend 0 (Conexant CX24123/CX24109)...
DVB: registering adapter 0 frontend 1 (Conexant CX22702 DVB-T)...
Adding 2104504k swap on /dev/sdb2. Priority:-1 extents:1 across:2104504k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
ata3.01: exception Emask 0x10 SAct 0x0 SErr 0x280100 action 0x6
ata3.01: BMDMA stat 0x46
ata3: SError: { UnrecovData 10B8B BadCRC }
ata3.01: cmd c8/00:72:9f:00:00/00:00:00:00:00/f0 tag 0 dma 58368 in
res 51/84:72:9f:00:00/00:00:00:00:00/f0 Emask 0x30 (host bus error)
ata3.01: status: { DRDY ERR }
ata3.01: error: { ICRC ABRT }
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: configured for UDMA/133
ata3: EH complete
ata3.01: exception Emask 0x10 SAct 0x0 SErr 0x280100 action 0x6
ata3.01: BMDMA stat 0x46
ata3: SError: { UnrecovData 10B8B BadCRC }
ata3.01: cmd c8/00:72:9f:00:00/00:00:00:00:00/f0 tag 0 dma 58368 in
res 51/84:72:9f:00:00/00:00:00:00:00/f0 Emask 0x30 (host bus error)
ata3.01: status: { DRDY ERR }
ata3.01: error: { ICRC ABRT }
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: configured for UDMA/133
ata3: EH complete
sd 2:0:1:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
ata3.01: exception Emask 0x10 SAct 0x0 SErr 0x280100 action 0x6
ata3.01: BMDMA stat 0x46
ata3: SError: { UnrecovData 10B8B BadCRC }
ata3.01: cmd c8/00:00:1f:01:00/00:00:00:00:00/f0 tag 0 dma 131072 in
res 51/84:00:1f:01:00/00:00:00:00:00/f0 Emask 0x30 (host bus error)
ata3.01: status: { DRDY ERR }
ata3.01: error: { ICRC ABRT }
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: configured for UDMA/133
ata3: EH complete
ata3: limiting SATA link speed to 1.5 Gbps
ata3.01: exception Emask 0x10 SAct 0x0 SErr 0x280100 action 0x6
ata3.01: BMDMA stat 0x46
ata3: SError: { UnrecovData 10B8B BadCRC }
ata3.01: cmd c8/00:00:1f:01:00/00:00:00:00:00/f0 tag 0 dma 131072 in
res 51/84:00:1f:01:00/00:00:00:00:00/f0 Emask 0x30 (host bus error)
ata3.01: status: { DRDY ERR }
ata3.01: error: { ICRC ABRT }
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.01: configured for UDMA/133
ata3: EH complete
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
type=1505 audit(1234729527.668:2): operation="profile_load" name="/bin/ping" name2="default" pid=1795
type=1505 audit(1234729527.696:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1810
type=1505 audit(1234729527.728:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1812
type=1505 audit(1234729527.791:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1813
type=1505 audit(1234729527.827:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1824
type=1505 audit(1234729527.863:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1828
type=1505 audit(1234729527.887:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1829
type=1505 audit(1234729527.911:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1830
type=1505 audit(1234729527.947:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1831
type=1505 audit(1234729528.024:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1834
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
powernow: This module only works with AMD K7 CPUs
cdrom: This disc doesn't have any tracks I recognize!
bootsplash: status on console 0 changed to on
r8169: eth0: link down
NET: Registered protocol family 17
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
CPU1 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
wlan1: Initial auth_alg=0
wlan1: authenticate with AP 00:1b:2f:64:75:10
wlan1: RX authentication from 00:1b:2f:64:75:10 (alg=0 transaction=2 status=0)
wlan1: authenticated
wlan1: associate with AP 00:1b:2f:64:75:10
wlan1: RX AssocResp from 00:1b:2f:64:75:10 (capab=0x411 status=0 aid=3)
wlan1: associated
wlan1: switched to short barker preamble (BSSID=00:1b:2f:64:75:10)
cx88[0]/0: tvaudio support needs work for this tv norm [PAL-N], sorry
cx88[0]/0: tvaudio support needs work for this tv norm [PAL-Nc], sorry
cx88[0]/0: tvaudio support needs work for this tv norm [PAL-60], sorry
cx88[0]/0: tvaudio support needs work for this tv norm [NTSC-443], sorry
cx88[0]/0: tvaudio support needs work for this tv norm [PAL-N], sorry
cx88[0]/0: tvaudio support needs work for this tv norm [PAL-Nc], sorry
cx88[0]/0: tvaudio support needs work for this tv norm [PAL-60], sorry

Hi,

kann sein, dass es bei dir evtl. genauso läuft wie bei meiner HVR-1300:
Du musst den Sound der TV-Karte mittels sox an deine Soundkarte weiterleiten. Bei mir sieht das so aus:
Per Konsole Musst du mal a bissl googeln. Ich habs auch nur durch Ausprobieren hinbekommen.

Ich liebe dieses forum!!!

es hat geklappt. musste paar einstellungen ändern aber es läuft!! wunderbar

vielen dank


noch ne frage wie hast du den E6550 auf 3,3GHz gebracht. läuft es stabil und wie ist deine cpu temp?

danke nochmal endlich geht die TV-Karte

Hi,

freut mich, wenn's läuft.

Zur Cpu: Ich kann dir gerne mal meine Bios-Einstellungen per PM schicken. Die Temp liegt so im Normalbetrieb zwischen 30 und 35°. Über 60 Grad habe ich das Teil noch nie gebracht, auch nicht nach mehreren Stunden daddeln.