Brother MFC425-CN unter openSuse 11.1

Hallo und frohes neues Jahr!

Ich habe ein Problem mit der Einrichtung meines Druckers
Computer: Laptop mit AMD 1400+ und 256MB RAM
Betriebssystem: openSuse 11.1, heruntergeladen und installiert am 31.12.2008
Drucker: Brother MFC 425 CN, angeschlossen über USB

Installiert wurden alle von Brother zur Verfügung gestellten RPM-Dateien in der richtigen Reihenfolge.

Der Drucker wird in CUPS angezeigt, eine Testseite wird jedoch nicht gedruckt sonder es wird gemeldet das der Drucker nicht angeschlossen sei (USB-Verkabelung und Stromanschluss sind jedoch korrekt). Der Drucker ist auf dem selben Computer unter openSuse 10.3 funktionsbereit und druckt fehlerfrei...
Beim Versuch, den Drucker zu ändern, bleibt CUPS nach Eingabe des Druckernames hängen, während er sich mit localhost:631 verbinden will / soll.

Unter YAST wird der Drucker angezeigt, die Ausgabe einer Testseite streikt ebenfalls. Wird der Drucker gelöscht und versucht, ihn unter YAST neu zu installieren, wird auf einmal kein Drucker am USB-Port gefunden...

Hier die Ausgaben laut dem Drucker_FAQ (http://wiki.linux-club.de/opensuse/Drucker_FAQ):

lsmod | grep usb:
prism2_usb 67268 1
p80211 27188 1 prism2_usb
usb_storage 86716 0
usblp 11696 0
usbhid 45908 0
hid 35784 1 usbhid
ff_memless 7244 1 usbhid
usbcore 167604 10 prism2_usb,usb_storage,usblp,usbhid,ohci_hcd,ehci_hcd
scsi_mod 149804 5 sr_mod,usb_storage,sg,sd_mod,libata

lpc status:
BRFAX:
Drucker verbunden über „usb“ Geschwindigkeit -1
Warteliste aktiviert
Drucken aktiviert
keine Einträge
Deamon vorhanden
MFC210C:
Warteliste aktiviert
Drucken aktiviert
keine Einträge
Deamon vorhanden

lpstat -s:
Standardziel des Systems: MFC210C
Gerät für BRFAX: usb:/dev/usb/lp0
Gerät für MFC210C: usb:/dev/usb/lp0

lpinfo -v:
Keine Rückmeldung oder Ausgabe im Terminal (hängt sich auf)

lsusb:
Keine Rückmeldung oder Ausgabe im Terminal (hängt sich auf)

lpr -PMFC210C /etc/fstab:
Druckauftrag wird im KJobViewer angezeigt, aber nicht gedruckt
Der Auftragsbercht vonKJobViewer gibt folgendes aus:
job-more-info ipp://localhost:631/jobs/146
job-printer-up-time Fr Jan 2 16:31:46 2009
job-state-reasons job-printing
job-uri ipp://localhost:631/jobs/146
printer-uri ipp://localhost/printers/MFC210C
job-originating-user-name root
job-name fstab
document-format text/plain
media BrLetter
finishings 0x3
copies 1
job-hold-until no-hold
job-priority 50
number-up 1
job-sheets none
none
job-uuid urn:uuid:74d726ae-b876-3d57-7576-05c161ec4967
job-originating-host-name localhost
time-at-creation Fr Jan 2 16:20:34 2009
time-at-processing Fr Jan 2 16:20:34 2009
time-at-completed
job-id 146
job-state 0x5
job-media-sheets-completed 0
job-printer-uri ipp://linux-ueyx.site:631/printers/MFC210C
job-name fstab
job-k-octets 2
job-printer-state-message Drucker ist nicht verbunden, erneuter Versuch in 30 Sekunden …
job-printer-state-reasons connecting-to-device

Die Ausgabe von /var/log/cups/error_log hierzu:
I [02/Jan/2009:15:56:59 +0100] Listening to ::1:631 (IPv6)
I [02/Jan/2009:15:56:59 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2009:15:56:59 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2009:15:56:59 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [02/Jan/2009:15:56:59 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2009:15:56:59 +0100] Configured for up to 100 clients.
I [02/Jan/2009:15:56:59 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2009:15:56:59 +0100] Full reload is required.
I [02/Jan/2009:15:56:59 +0100] Loaded MIME database from '/etc/cups': 37 types, 40 filters...
I [02/Jan/2009:15:56:59 +0100] Loading job cache file "/etc/cups/yes/job.cache"...
I [02/Jan/2009:15:56:59 +0100] Full reload complete.
I [02/Jan/2009:15:56:59 +0100] Cleaning out old temporary files in "/var/spool/cups/tmp"...
I [02/Jan/2009:15:56:59 +0100] Listening to ::1:631 on fd 1...
I [02/Jan/2009:15:56:59 +0100] Listening to 127.0.0.1:631 on fd 3...
I [02/Jan/2009:15:56:59 +0100] Listening to /var/run/cups/cups.sock on fd 4...
I [02/Jan/2009:15:56:59 +0100] Resuming new connection processing...
I [02/Jan/2009:15:56:59 +0100] [Job 144] Started filter /usr/lib/cups/filter/pdftops (PID 3287)
I [02/Jan/2009:15:56:59 +0100] [Job 144] Started filter /usr/lib/cups/filter/pstops (PID 3288)
I [02/Jan/2009:15:56:59 +0100] [Job 144] Started filter /usr/lib/cups/filter/brlpdwrapperMFC210C (PID 3291)
I [02/Jan/2009:15:56:59 +0100] [Job 144] Started backend /usr/lib/cups/backend/usb (PID 3294)
I [02/Jan/2009:15:58:27 +0100] [Job 144] Canceled by "andi".
I [02/Jan/2009:15:59:13 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5562)
I [02/Jan/2009:15:59:16 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5563)
I [02/Jan/2009:15:59:38 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=5564)
I [02/Jan/2009:15:59:41 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=5565)
I [02/Jan/2009:15:59:41 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=5566)
I [02/Jan/2009:16:00:48 +0100] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5595)
I [02/Jan/2009:16:00:50 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5596)
I [02/Jan/2009:16:15:29 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=5747)
I [02/Jan/2009:16:20:33 +0100] [Job ???] Request file type is text/plain.
I [02/Jan/2009:16:20:34 +0100] [Job 146] Adding start banner page "none".
I [02/Jan/2009:16:20:34 +0100] [Job 146] Adding end banner page "none".
I [02/Jan/2009:16:20:34 +0100] [Job 146] File of type text/plain queued by "root".
I [02/Jan/2009:16:20:34 +0100] [Job 146] Queued on "MFC210C" by "root".
I [02/Jan/2009:16:20:34 +0100] [Job 146] Started filter /usr/lib/cups/filter/texttops (PID 5790)
I [02/Jan/2009:16:20:34 +0100] [Job 146] Started filter /usr/lib/cups/filter/pstops (PID 5791)
I [02/Jan/2009:16:20:34 +0100] [Job 146] Started filter /usr/lib/cups/filter/brlpdwrapperMFC210C (PID 5792)
I [02/Jan/2009:16:20:34 +0100] [Job 146] Started backend /usr/lib/cups/backend/usb (PID 5793)
I [02/Jan/2009:16:21:30 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=7217)
E [02/Jan/2009:16:34:22 +0100] Cancel-Job: Unauthorized
E [02/Jan/2009:16:34:22 +0100] Cancel-Job: Unauthorized
E [02/Jan/2009:16:34:22 +0100] Cancel-Job: Unauthorized
E [02/Jan/2009:16:34:22 +0100] Cancel-Job: Unauthorized
I [02/Jan/2009:16:34:32 +0100] [Job 146] Canceled by "root".

Kann sich darauf jemand einen Reim machen?

Vielen Dank im voraus!
Jonas

Was hängt noch an den USB-Anschlüssen?
Es sieht nach anderen Problemen, wie der Drucker, hast du schon mal die
dmesg-Meldungen beobachtet?
Was sagt "lsmod"?

MfG
misiu

Ausser dem Brother ist ein Logitech-Trackball angeschlossen, die restlichen zwei USB-Anschlüsse sind nicht belegt. Beide Geräte funktionieren unter der parallel installierten openSuse 10.3 normal und problemlos. Beim Computer handelt es sich um ein ECS-Gerät (Elitegroup A535).

lsmod:
Module Size Used by
ip6t_LOG 6212 7
xt_tcpudp 2728 2
xt_pkttype 1560 3
ipt_LOG 5708 8
xt_limit 2056 15
vboxdrv 62248 0
binfmt_misc 7872 1
snd_pcm_oss 43300 0
snd_mixer_oss 14288 1 snd_pcm_oss
snd_seq 52248 0
snd_seq_device 7168 1 snd_seq
af_packet 16596 0
cpufreq_conservative 6360 0
cpufreq_userspace 3112 0
cpufreq_powersave 1640 0
powernow_k7 7516 0
ip6t_REJECT 4984 3
nf_conntrack_ipv6 20196 4
ip6table_raw 1792 1
xt_NOTRACK 1544 4
ipt_REJECT 2760 3
xt_state 1904 8
iptable_raw 2056 1
iptable_filter 2548 1
ip6table_mangle 2288 0
nf_conntrack_netbios_ns 2152 0
nf_conntrack_ipv4 10480 4
nf_conntrack 67400 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntra
ck_netbios_ns,nf_conntrack_ipv4
ip_tables 11348 2 iptable_raw,iptable_filter
ip6table_filter 2408 1
ip6_tables 12580 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_f
ilter
x_tables 14500 11 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,
ip6t_REJECT,xt_NOTRACK,ipt_REJECT,xt_state,ip_tables,ip6_tables
ipv6 242608 23 ip6t_REJECT,nf_conntrack_ipv6,ip6table_mangle
fuse 52488 1
loop 15028 0
dm_mod 62236 0
ppdev 6876 0
rtc_cmos 11488 0
rtc_core 18048 1 rtc_cmos
rtc_lib 2816 1 rtc_core
pcspkr 2344 0
joydev 9384 0
serio_raw 5092 0
snd_intel8x0 28772 3
snd_intel8x0m 14024 1
r8169 26824 0
mii 4968 1 r8169
snd_ac97_codec 100064 2 snd_intel8x0,snd_intel8x0m
parport_pc 35032 0
battery 11156 0
ac 4452 0
ac97_bus 1584 1 snd_ac97_codec
snd_pcm 79096 4 snd_pcm_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_
codec
parport 33832 2 ppdev,parport_pc
shpchp 28280 0
button 6560 0
sis_agp 6968 1
snd_timer 21132 2 snd_seq,snd_pcm
i2c_sis96x 6292 0
prism2_usb 67268 1
snd 57408 17 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_devic
e,snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
sr_mod 13536 0
p80211 27188 1 prism2_usb
soundcore 6900 1 snd
pci_hotplug 27392 1 shpchp
usblp 11696 0
cdrom 32288 1 sr_mod
snd_page_alloc 8184 3 snd_intel8x0,snd_intel8x0m,snd_pcm
i2c_core 29972 1 i2c_sis96x
agpgart 32564 1 sis_agp
usb_storage 86716 0
sg 29376 0
usbhid 45908 0
hid 35784 1 usbhid
ff_memless 7244 1 usbhid
ohci_hcd 31800 0
ehci_hcd 48260 0
usbcore 167604 7 prism2_usb,usblp,usb_storage,usbhid,ohci_hcd,ehc i_hcd
sd_mod 31424 7
crc_t10dif 1704 1 sd_mod
edd 8616 0
ext3 124716 5
mbcache 8132 1 ext3
jbd 56764 1 ext3
fan 4712 0
ide_pci_generic 3428 0
sis5513 7328 0
ide_core 99412 2 ide_pci_generic,sis5513
ata_generic 4484 0
pata_sis 10064 6
libata 161148 2 ata_generic,pata_sis
scsi_mod 149804 5 sr_mod,usb_storage,sg,sd_mod,libata
dock 11988 1 libata
thermal 19916 0
processor 44060 2 powernow_k7,thermal
thermal_sys 11364 3 fan,thermal,processor
hwmon 3092 1 thermal_sys

dmesg (komplett - ich wollte nichts wichtiges aus versehen herausnehmen):
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
BIOS-e820: 000000000dff0000 - 000000000dff8000 (ACPI data)
BIOS-e820: 000000000dff8000 - 000000000e000000 (ACPI NVS)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xdff0 max_arch_pfn = 0x1000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to dff0000 @ 10000-16000
RAMDISK: 0da62000 - 0dfdf3bc
ACPI: RSDP 000FAF70, 0014 (r0 AMI )
ACPI: RSDT 0DFF0000, 0028 (r1 AMIINT SiS740XX 1000 MSFT 100000B)
ACPI: FACP 0DFF0030, 0081 (r1 AMIINT SiS740XX 11 MSFT 100000B)
ACPI: DSDT 0DFF00C0, 3600 (r1 SiS 740 100 MSFT 100000E)
ACPI: FACS 0DFF8000, 0040
NUMA - single node, flat memory mode
Node: 0, start_pfn: 0, end_pfn: dff0
Setting physnode_map array to node 0 for pfns:
0 4000 8000 c000
node 0 pfn: [0 - dff0]
Reserving 512 pages of KVA for lmem_map of node 0 at d800
remove_active_range (0, 55296, 55808)
Reserving total of 200 pages for numa KVA remap
kva_start_pfn ~ d600 max_low_pfn ~ dff0
max_pfn = dff0
0MB HIGHMEM available.
223MB LOWMEM available.
max_low_pfn = dff0, highstart_pfn = dff0
Low memory ends at vaddr cdff0000
node 0 will remap to vaddr cd600000 - cd800000
allocate_pgdat: node 0 NODE_DATA cd600000
remap_numa_kva: node 0
remap_numa_kva: cd600000 to pfn 0000d800
High memory starts at vaddr cdff0000
mapped low ram: 0 - 0dff0000
low ram: 00000000 - 0dff0000
bootmap 00015000 - 00016c00
(11 early reservations) ==> bootmem [0000000000 - 000dff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000066c45c] TEXT DATA BSS ==> [0000100000 - 000066c45c]
#4 [000da62000 - 000dfdf3bc] RAMDISK ==> [000da62000 - 000dfdf3bc]
#5 [000066d000 - 0000675000] INIT_PG_TABLE ==> [000066d000 - 0000675000]
#6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#7 [0000010000 - 0000015000] PGTABLE ==> [0000010000 - 0000015000]
#8 [000d800000 - 000da00000] KVA RAM ==> [000d800000 - 000da00000]
#9 [000d600000 - 000d800000] KVA PG ==> [000d600000 - 000d800000]
#10 [0000015000 - 0000017000] BOOTMAP ==> [0000015000 - 0000017000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0000dff0
HighMem 0x0000dff0 -> 0x0000dff0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0000d800
0: 0x0000da00 -> 0x0000dff0
On node 0 totalpages: 56703
free_area_init_node: node 0, pgdat cd600000, node_mem_map cd602240
DMA zone: 3947 pages, LIFO batch:0
Normal zone: 52252 pages, LIFO batch:15
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01001000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ec000
PM: Registered nosave memory: 00000000000ec000 - 0000000000100000
Allocating PCI resources starting at 10000000 (gap: e000000:f1ee0000)
PERCPU: Allocating 39708 bytes of per cpu data
NR_CPUS: 128, nr_cpu_ids: 1, nr_node_ids 8
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56199
Policy zone: Normal
Kernel command line: root=/dev/disk/by-id/ata-IC25N040ATCS04-0_CSL406DDJZHP2A-part3 resume=/dev/disk/by-id/ata-IC25N040ATCS04-0_CSL406DDJZHP2A-part2 splash=silent vga=0x317
bootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 995.759 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Initializing HighMem for node 0 (00000000:00000000)
Memory: 213260k/229312k available (2396k kernel code, 15600k reserved, 1959k data, 328k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xff8b6000 - 0xfffff000 (7460 kB)
pkmap : 0xff400000 - 0xff600000 (2048 kB)
vmalloc : 0xce800000 - 0xff3fe000 ( 779 MB)
lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
.init : 0xc0548000 - 0xc059a000 ( 328 kB)
.data : 0xc03571ab - 0xc0540f88 (1959 kB)
.text : 0xc0100000 - 0xc03571ab (2396 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay loop (skipped), value calculated using timer frequency.. 1991.51 BogoMIPS (lpj=3983036)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 443 Objects with 42 Devices 131 Methods 20 Regions
tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0c20)
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Mapping cpu 0 to node 0
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Mapping cpu 0 to node 0
Brought up 1 CPUs
Total of 1 processors activated (1991.51 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 1044 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2
evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-0957 [00] ev_create_gpe_block : GPE 10 to 1F [_GPE] 2 regs on int 0x9
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:.......................................................................................
Initialized 18/20 Regions 5/5 Fields 32/33 Buffers 32/32 Packages (452 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 0 _STA executions (examined 45 objects)
evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 0 Runtime GPEs in this block
evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 2 Runtime GPEs in this block
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [d0000000, d3ffffff]
pci 0000:00:02.0: Enabling SiS 96x SMBus
PCI: 0000:00:02.1 reg 20 io port: [c00, c1f]
PCI: 0000:00:02.5 reg 20 io port: [ff00, ff0f]
PCI: 0000:00:02.6 reg 10 io port: [d400, d4ff]
PCI: 0000:00:02.6 reg 14 io port: [d000, d07f]
pci 0000:00:02.6: supports D1
pci 0000:00:02.6: supports D2
pci 0000:00:02.6: PME# supported from D3hot D3cold
pci 0000:00:02.6: PME# disabled
PCI: 0000:00:02.7 reg 10 io port: [dc00, dcff]
PCI: 0000:00:02.7 reg 14 io port: [d800, d87f]
pci 0000:00:02.7: supports D1
pci 0000:00:02.7: supports D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
PCI: 0000:00:03.0 reg 10 32bit mmio: [cfff9000, cfff9fff]
PCI: 0000:00:03.1 reg 10 32bit mmio: [cfffa000, cfffafff]
PCI: 0000:00:03.3 reg 10 32bit mmio: [cfffb000, cfffbfff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
PCI: 0000:00:07.0 reg 10 io port: [cc00, ccff]
PCI: 0000:00:07.0 reg 14 32bit mmio: [cfff8f00, cfff8fff]
PCI: 0000:00:07.0 reg 30 32bit mmio: [cffc0000, cffdffff]
pci 0000:00:07.0: supports D1
pci 0000:00:07.0: supports D2
pci 0000:00:07.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, c7ffffff]
PCI: 0000:01:00.0 reg 14 32bit mmio: [cfee0000, cfefffff]
PCI: 0000:01:00.0 reg 18 io port: [ac00, ac7f]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [a000, afff]
PCI: bridge 0000:00:01.0 32bit mmio: [cfd00000, cfefffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [bfa00000, cfbfffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
system 00:01: ioport range 0x290-0x297 has been reserved
system 00:01: ioport range 0x480-0x48f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x820-0x821 has been reserved
system 00:01: ioport range 0x862-0x862 has been reserved
system 00:01: ioport range 0x866-0x8ff has been reserved
system 00:01: ioport range 0xc00-0xc1f has been reserved
system 00:01: ioport range 0x3f0-0x3f1 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xa000-0xafff
pci 0000:00:01.0: MEM window: 0xcfd00000-0xcfefffff
pci 0000:00:01.0: PREFETCH window: 0x000000bfa00000-0x000000cfbfffff
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [a000, afff]
bus: 01 index 1 mmio: [cfd00000, cfefffff]
bus: 01 index 2 mmio: [bfa00000, cfbfffff]
bus: 01 index 3 mmio: [0, 0]
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 5620k freed
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1230965349.900:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 106
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
vesafb: framebuffer at 0xc0000000, mapped to 0xce880000, using 6144k, total 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at cbdc:0008
vesafb: pmi: set display start = c00cbe02, set palette = c00cbe58
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
Switched to high resolution mode on CPU 0
bootsplash: silentjpeg size 100719 bytes
bootsplash: ...found (1024x768, 38691 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver8 ports, IRQ sharing enabled
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
serial 0000:00:02.6: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
serial 0000:00:02.6: PCI INT C disabled
PNP: PS/2 Controller [PNP0303S2K,PNP0f03S2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 328k freed
Write protecting the kernel text: 2400k
Write protecting the kernel read-only data: 1776k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
processor ACPI_CPU:00: registered as cooling_device0
ACPI: No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_sis 0000:00:02.5: version 0.5.2
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ata1.00: ATA-5: IC25N040ATCS04-0, CA4OA71A, max UDMA/100
ata1.00: 78140160 sectors, multi 16: LBA
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
ata2.00: ATAPI: Slimtype COMBO LSC-24081, 3ME8, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM Slimtype COMBO LSC-24081 3ME8 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
udevd version 128 started
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x1d48b1, caps: 0x904713/0x4006
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0GB/37.2GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0GB/37.2GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 <<6>usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sda5ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
ehci_hcd 0000:00:03.3: irq 5, io mem 0xcfffb000
sda6<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
sda7<6>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.7-9-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:03.3
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 10, io mem 0xcfff9000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.7-9-pae ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 5, io mem 0xcfffa000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.7-9-pae ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=046d, idProduct=c404
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Trackball
usb 2-1: Manufacturer: Logitech
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=04f9, idProduct=0194
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
usb 3-1: SerialNumber: BROF6F261655
usb 3-2: new full speed USB device using ohci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: New USB device found, idVendor=124a, idProduct=168b
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: IEEE 802.11b PRISM3 USB
usb 3-2: Manufacturer: AirVast Taiwan
usbcore: registered new interface driver hiddev
input: Logitech Trackball as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input2
input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:03.0-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 128 started
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Linux agpgart interface v0.103
usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0194
usbcore: registered new interface driver usblp
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
p80211: module is from the staging directory, the quality is unknown, you have been warned.
sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
prism2_usb: module is from the staging directory, the quality is unknown, you have been warned.
prism2usb_init: prism2_usb.o: 0.2.8 Loaded
prism2usb_init: dev_info is: prism2_usb
BUG: unable to handle kernel NULL pointer dereference at 00000008
IP: [<cf16cf52>] 80211:wlan_setup+0xf3/0x138
*pdpt = 000000000c0cf001 *pde = 0000000000000000
Oops: 0002 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/usb2/2-1/bcdDevice
Modules linked in: prism2_usb(CN+) snd sr_mod p80211(CN) soundcore pci_hotplug usblp cdrom snd_page_alloc i2c_core agpgart usb_storage sg usbhid hid ff_memless ohci_hcd ehci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic sis5513 ide_core ata_generic pata_sis libata scsi_mod dock thermal processor thermal_sys hwmon
Supported: Yes

Pid: 728, comm: modprobe Tainted: G (2.6.27.7-9-pae #1)
EIP: 0060:[<cf16cf52>] EFLAGS: 00010286 CPU: 0
EIP is at wlan_setup+0xf3/0x138 [p80211]
EAX: 00000008 EBX: cc06e000 ECX: 00000000 EDX: 00000000
ESI: cbdd9000 EDI: cc06e480 EBP: cf17b0ce ESP: cc0c3df4
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 728, ti=cc0c2000 task=cc0c10d0 task.ti=cc0c2000)
Stack: 00000202 00000202 cbdd9000 cbdd9000 cc8cc000 cc8cd65c cf17a812 c01de8e6
cf18246c cf10043a cbe34c00 cb8f185c cbe34c00 00000000 cbe34c1c cf18246c
cf101103 00000000 cbe34c1c cbe34c94 cb9290e0 cf181314 cb8f1800 cbe34c1c
Call Trace:
[<cf17a812>] prism2sta_probe_usb+0xf6/0x204 [prism2_usb]
[<cf101103>] usb_probe_interface+0x196/0x1ca [usbcore]
[<c02afe96>] really_probe+0xd7/0x1de
[<c02b0072>] __driver_attach+0x37/0x55
[<c02af751>] bus_for_each_dev+0x31/0x57
[<c02afc48>] driver_attach+0x16/0x18
[<c02af14a>] bus_add_driver+0xec/0x21b
[<c02b01e5>] driver_register+0x85/0xe2
[<cf101302>] usb_register_driver+0x60/0xc3 [usbcore]
[<c010112b>] _stext+0x3b/0x127
[<c015001a>] sys_init_module+0x8a/0x19e
[<c0104c9b>] sysenter_do_call+0x12/0x2f
[<ffffe430>] 0xffffe430
=======================
Code: 16 cf 8d 42 08 c7 83 b4 02 00 00 db c6 16 cf c7 43 40 48 c6 16 cf c7 83 a4 02 00 00 57 c6 16 cf c7 83 a8 02 00 00 a2 c6 16 cf 90 <80> 4a 08 01 c7 83 c8 02 00 00 ed c6 16 cf b9 04 00 00 00 c7 83
EIP: [<cf16cf52>] wlan_setup+0xf3/0x138 [p80211] SS:ESP 0068:cc0c3df4
---[ end trace 31810e4d71f2a7d4 ]---
scsi 2:0:0:0: Direct-Access Brother MFC-425CN 1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
ACPI: I/O resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f]
ACPI: Device needs an ACPI driver
agpgart-sis 0000:00:00.0: SiS chipset [1039/0740]
agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
ACPI: AC Adapter [AC] (on-line)
IT8705 SuperIO detected.
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ACPI: Battery Slot [BAT0] (battery present)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
r8169 0000:00:07.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
eth0: RTL8169s at 0xcf0daf00, 00:0d:87:3f:af:a8, XID 00800000 IRQ 5
Intel ICH Modem 0000:00:02.6: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
input: PC Speaker as /devices/platform/pcspkr/input/input6
intel8x0_measure_ac97_clock: measured 55706 usecs
intel8x0: clocking to 48000
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
ppdev: user-space parallel port driver
Adding 514072k swap on /dev/sda2. Priority:-1 extents:1 across:514072k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1230965381.692:2): operation="profile_load" name="/bin/ping" name2="default" pid=1714
type=1505 audit(1230965381.964:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1727
type=1505 audit(1230965382.344:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1736
type=1505 audit(1230965382.716:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1758
type=1505 audit(1230965383.032:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1774
type=1505 audit(1230965383.392:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1793
type=1505 audit(1230965383.856:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1810
type=1505 audit(1230965384.136:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1822
type=1505 audit(1230965384.504:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1823
type=1505 audit(1230965384.712:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1824
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
powernow-k8: Processor cpuid 662 not supported
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: SGTC: 10000
powernow: Minimum speed 497 MHz. Maximum speed 995 MHz.
Marking TSC unstable due to cpufreq changes
Clocksource tsc unstable (delta = -217991277 ns)
r8169: eth0: link up
NET: Registered protocol family 17
eth0: no IPv6 routers present
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.0.6_OSE (interface 0x00090000).

Wenn ich das richtig sehe werden die externen USB-Geräte erkannt. Bei dem "PRISM USB" handelt es sich um ein internes WLAN, das aber nicht genutzt wird und deswegen nicht konfiguriert ist.

Wäre toll wenn mir jekand weiterhelfen könnte.
Jonas

usbcore 167604 7 prism2_usb,usblp,usb_storage,usbhid,ohci_hcd,ehc i_hcd

Zum Vergrößern anklicken....

So eine Vermutung:
Entlade den prism2_usb-Treiber und schau , ob es dann geht.

Läuft opensuse 10.3 mit ACPI?
Irgendwelche Zusatz-Kernelbootparameter?
Vergleiche mal die Dateien in /etc/cups , in 10.3 und 11.

MfG
misiu