• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Prg. beim Booten starten (kein Daemon)

carsto

Hacker
Hallo,

ich habe eine App. die bei Runlevel 3 starten soll und weiter laufen soll. Die App. ist nicht als Daemon programmiert.
Habe ein Script unter /etc/init.d erstellt, und mich an eins der anderen Scripte gehalten.
Auf der Console funzt es mit
testapp start und testapp stop, aber der Yast2 bleibt beim Starten hängen und auch beim Booten wird es nicht gestartet.
Hat jemand ne idee was das sein kann ??
Ich benutze Suse 9.3

cu Carsten.
 
OP
C

carsto

Hacker
jein , im Moment nicht, wenn ich es in der /etc/init.d/testapp eintrage mit

TESTAPP_BIN=/home/TESTUSR/TESTAPP &

funzt das Script ja auf der Console schon nicht mehr??
 

Martin Breidenbach

Ultimate Guru
'&' führt dazu daß bash das was davor steht als neuen Prozeß startet. Wenn Du das also *DA* reinschreibst dann wirkt das ja in der Zeile wo Du die Variable setzt und nicht da wo sie verwendet wird.

Das muß an der Stelle hin wo das Programm auch wirklich gestartet werden soll.
 
OP
C

carsto

Hacker
okay, aber dann bringt ja weiter unten im Script:
startproc $TESTAPP_BIN &

auch nicht die Lösung???
 
OP
C

carsto

Hacker
okay hier mein script:

#! /bin/sh
# Copyright (c) 1995-2002 SuSE GmbH Nuernberg, Germany.
#
# Author: Kurt Garloff <feedback@suse.de>
#
# /etc/init.d/at
#
# and symbolic its link
#
# /sbin/rcat
#
# System startup script for the at daemon
#
### BEGIN INIT INFO
# Provides: testapp
# Required-Start:
# Required-Stop:
# X-UnitedLinux-Default-Enabled: no
# Default-Start: 3
# Default-Stop: 0
# Description: Start TESTAPP
### END INIT INFO

TESTAPP_BIN=/home/testapp/testapp
test -x $TESTAPP_BIN || exit 5

# Shell functions sourced from /etc/rc.status:
# rc_check check and set local and overall rc status
# rc_status check and set local and overall rc status
# rc_status -v ditto but be verbose in local rc status
# rc_status -v -r ditto and clear the local rc status
# rc_failed set local and overall rc status to failed
# rc_failed <num> set local and overall rc status to <num><num>
# rc_reset clear local rc status (overall remains)
# rc_exit exit appropriate to overall rc status
. /etc/rc.status

# First reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0 - success
# 1 - generic or unspecified error
# 2 - invalid or excess argument(s)
# 3 - unimplemented feature (e.g. "reload")
# 4 - insufficient privilege
# 5 - program is not installed
# 6 - program is not configured
# 7 - program is not running
#
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signalling is not supported) are
# considered a success.

case "$1" in
start)
echo -n "Starting service testapp"
## Start daemon with startproc(8). If this fails
## the echo return value is set appropriate.

# NOTE: startproc return 0, even if service is
# already running to match LSB spec.
startproc $TESTAPP_BIN &

# Remember status and be verbose
rc_status -v
;;
stop)
echo -n "Shutting down service testapp"
## Stop daemon with killproc(8) and if this fails
## set echo the echo return value.

killproc -TERM $TESTAPP_BIN

# Remember status and be verbose
rc_status -v
;;
try-restart)
## Stop the service and if this succeeds (i.e. the
## service was running before), start it again.
## Note: try-restart is not (yet) part of LSB (as of 0.7.5)
$0 status >/dev/null && $0 restart

# Remember status and be quiet
rc_status
;;
restart)
## Stop the service and regardless of whether it was
## running or not, start it again.
$0 stop
$0 start

# Remember status and be quiet
rc_status
;;
force-reload)
## Signal the daemon to reload its config. Most daemons
## do this on signal 1 (SIGHUP).
## If it does not support it, restart.

echo -n "Reload service at daemon"

## Otherwise:
$0 stop && $0 start
rc_status
;;
reload)
## Like force-reload, but if daemon does not support
## signalling, do nothing (!)

# If it supports signalling:
echo -n "Reload service at daemon"

## Otherwise if it does not support reload:
rc_failed 3
rc_status -v
;;
status)
echo -n "Checking for testapp: "
## Check status with checkproc(8), if process is running
## checkproc will return with exit status 0.

# Status has a slightly different for the status command:
# 0 - service running
# 1 - service dead, but /var/run/ pid file exists
# 2 - service dead, but /var/lock/ lock file exists
# 3 - service not running

# NOTE: checkproc returns LSB compliant status values.
checkproc $TESTAPP_BIN
rc_status -v
;;
*)
echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}"
exit 1
;;
esac
 
Oben