eSATA Platte wir erkannt kann aber nicht zugreifen

Hi bin absoluter neu mit linux hab openSUSE 11.0 (x86_64) und vorher nur windoof.
Ich hab eine externe Festplatte mit PCI Karte gekauft. Die unter Windows damals eingebaut und Daten gesichert, nun möchte ich gerne darauf zugreifen. ESATA Platte wird wie gesagt erkannt, kann aber nicht auf die Daten zugreifen. Format ist Fat32. Noch ne andre Frage: kann man schon sicher auf ntfs zugreifen und mit welchem Programm?

danke für die Hilfe gruss Tim

Was heißt du kannst nicht auf die Daten zugreifen? Wird die Platte nicht automatisch gemounted oder gibt es Zugriffsfehler? Irgendwelche Fehlermeldungen?
NTFS-ZUgriff läuft hier bei mir sowohl lesend als auch schreibend ohne Zicken. Stichwort: ntfs-3g

hi Also Fehlermeldungen an sich kommen erstmal nicht. jedenfalls nicht von allein. Die Platte ist nicht in der Liste der Datenträger im Konqueror aufgelistet. Geh ich aber in den Verzeichnisbaum finde ich sie aufgelistet.
Blockorientiertes gerät
berechtigung: lrw-r-----
eigentümer :root
Gruppe: disk
verknüpfung ../../sda1
hatte auch mal in nem andren Programm gesehen das er die erkannt hat und alle details dazu aufgelistet hat...weiß aber nicht mehr welches:-(
hilft dir des schon mal weiter? ich denke ich habs nur falsch gemountet oder so.
grüsse

Was liefert denn die Ausgabe von sowie und

hi mount bringt:


/dev/mapper/system-root on / type ext3 (rw,acl,user_xattr)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sdb1 on /boot type ext3 (rw,acl,user_xattr)
/dev/mapper/system-home on /home type ext3 (rw,acl,user_xattr)
securityfs on /sys/kernel/security type securityfs (rw)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
/dev/sr0 on /media/SU1100.001 type iso9660 (ro,nosuid,nodev,noatime,uid=1000,utf8)


und das andre:

/dev/system/swap swap swap defaults 0 0
/dev/system/root / ext3 acl,user_xattr 1 1
/dev/disk/by-id/scsi-SATA_ST3200827A_4ND3RS21-part1 /boot ext3 acl,user_xattr 1 2
/dev/system/home /home ext3 acl,user_xattr 1 2
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0

hi manuelles mounten geht nicht, dmesg gibt folgendes:
Linux version 2.6.25.11-0.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-07-13 20:48:28 +0200
Command line: root=/dev/system/root resume=/dev/system/swap splash=silent showopts vga=0x317
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 393200) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F6B50, 0014 (r0 Nvidia)
ACPI: RSDT 5FFF3000, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: FACP 5FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: DSDT 5FFF30C0, 4BD0 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
ACPI: FACS 5FFF0000, 0040
ACPI: MCFG 5FFF7D40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
ACPI: APIC 5FFF7CC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000005fff0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 393200) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000005fff0000
NODE_DATA [000000000000c000 - 0000000000013fff]
bootmap [0000000000014000 - 000000000001ffff] pages c
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-8b5bd7] TEXT DATA BSS
early res: 3 [37a12000-37fef265] RAMDISK
early res: 4 [9d000-9ffff] EBDA
early res: 5 [8000-bfff] PGTABLE
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 393200
On node 0 totalpages: 393103
DMA zone: 56 pages used for memmap
DMA zone: 1729 pages reserved
DMA zone: 2214 pages, LIFO batch:0
DMA32 zone: 5319 pages used for memmap
DMA32 zone: 383785 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 68000000 (gap: 60000000:70000000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 47936 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 385999
Policy zone: DMA32
Kernel command line: root=/dev/system/root resume=/dev/system/swap splash=silent showopts vga=0x317
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
time.c: Detected 1809.267 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ 48000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
No AGP bridge found
Memory: 1536676k/1572800k available (2366k kernel code, 35736k reserved, 1920k data, 404k init)
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 3621.04 BogoMIPS (lpj=7242090)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 771 Objects with 83 Devices 269 Methods 30 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
APIC timer calibration result 12564362
Detected 12.564 MHz APIC timer.
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000001
groups: 00000000,00000000,00000000,00000001
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at d0000000 - dfffffff
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-0956 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:........................................................................
Initialized 26/30 Regions 1/1 Fields 32/32 Buffers 13/22 Packages (780 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 1 _STA executions (examined 87 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1080-0x10ff has been reserved
system 00:01: ioport range 0x1400-0x147f has been reserved
system 00:01: ioport range 0x1480-0x14ff has been reserved
system 00:01: ioport range 0x1800-0x187f has been reserved
system 00:01: ioport range 0x1880-0x18ff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x295-0x314 has been reserved
system 00:02: ioport range 0x294-0x297 could not be reserved
system 00:0b: iomem range 0xd0000000-0xdfffffff could not be reserved
system 00:0c: iomem range 0xd0000-0xd3fff has been reserved
system 00:0c: iomem range 0xdb000-0xdbfff has been reserved
system 00:0c: iomem range 0xf0000-0xfbfff could not be reserved
system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
system 00:0c: iomem range 0x5fff0000-0x5fffffff could not be reserved
system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0x100000-0x5ffeffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
PCI: Bridge: 0000:00:09.0
IO window: 9000-9fff
MEM window: 0xf2000000-0xf3ffffff
PREFETCH window: 0x0000000068000000-0x00000000680fffff
PCI: Bridge: 0000:00:0b.0
IO window: 6000-6fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: 8000-8fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: 7000-7fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: a000-afff
MEM window: 0xf0000000-0xf1ffffff
PREFETCH window: 0x00000000e0000000-0x00000000efffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 6004k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1220550242.756:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Linking AER extended capability
pci 0000:00:0c.0: Enabling HT MSI Mapping
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Linking AER extended capability
pci 0000:00:0d.0: Enabling HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:05:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0cie00]
Allocate Port Service[0000:00:0b.0cie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0cie00]
Allocate Port Service[0000:00:0c.0cie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0cie00]
Allocate Port Service[0000:00:0d.0cie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0cie00]
Allocate Port Service[0000:00:0e.0cie03]
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20010980000, using 6144k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 166113 bytes
bootsplash: ...found (1024x768, 154167 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: Can't read CTR while initializing i8042.
i8042: probe of i8042 failed with error -5
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
registered taskstats version 1
Freeing unused kernel memory: 404k freed
Write protecting the kernel read-only data: 1680k
Switched to high resolution mode on CPU 0
ACPI: ACPI0007:00 is registered as cooling_device0
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
sata_promise 0000:01:07.0: version 2.12
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
scsi0 : sata_promise
scsi1 : sata_promise
scsi2 : sata_promise
ata1: SATA max UDMA/133 mmio m4096@0xf3027000 port 0xf3027200 irq 19
ata2: SATA max UDMA/133 mmio m4096@0xf3027000 port 0xf3027280 irq 19
ata3: PATA max UDMA/133 mmio m4096@0xf3027000 port 0xf3027300 irq 19
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3300622AS, 3.AAE, max UDMA/133
ata2.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST3300622AS 3.AA PQ: 0 ANSI: 5
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:07.0 to 64
scsi3 : sata_nv
scsi4 : sata_nv
ata4: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 23
ata5: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 23
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi5 : sata_nv
scsi6 : sata_nv
ata6: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe000 irq 22
ata7: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe008 irq 22
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
pata_amd 0000:00:06.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi7 : pata_amd
scsi8 : pata_amd
ata8: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata9: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata8.01: HPA unlocked: 390719855 -> 390721968, native 390721968
ata8.01: ATA-7: ST3200827A, 3.AAH, max UDMA/100
ata8.01: 390721968 sectors, multi 16: LBA48
ata8: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c0c0) ACPI=0x3f01f (600:20:0x1c)
ata8.01: configured for UDMA/100
ata9.00: ATAPI: _NEC DVD_RW ND-3540A, 1.03, max UDMA/33
ata9.01: ATAPI: TEAC DV-W50D, 1.05, max UDMA/33
ata9: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc6c0c0) ACPI=0x701f (60:60:0x1f)
ata9: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc6c0c0) ACPI=0x701f (60:60:0x1f)
ata9.00: configured for UDMA/33
ata9.01: configured for UDMA/33
scsi 7:0:1:0: Direct-Access ATA ST3200827A 3.AA PQ: 0 ANSI: 5
scsi 8:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.03 PQ: 0 ANSI: 5
scsi 8:0:1:0: CD-ROM TEAC DV-W50D 1.05 PQ: 0 ANSI: 5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCL] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Driver 'sd' needs updating - please use bus_type methods
sd 1:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
sd 1:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
sd 7:0:1:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 7:0:1:0: [sdb] Write Protect is off
sd 7:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:1:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 7:0:1:0: [sdb] Write Protect is off
sd 7:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 7:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 7:0:1:0: [sdb] Attached SCSI disk
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.11-0.1-default ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 20, io mem 0xf4002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.11-0.1-default ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 1-0:1.0: unable to enumerate USB device on port 9
usb 2-9: new low speed USB device using ohci_hcd and address 2
md: linear personality registered for level -1
usb 2-9: configuration #1 chosen from 1 choice
usb 2-9: New USB device found, idVendor=046d, idProduct=c505
usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-9: Product: USB Receiver
usb 2-9: Manufacturer: Logitech
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input1
input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-9
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/input/input2
input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-9
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
JBD: barrier-based sync failed on dm-1 - disabling barriers
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 7:0:1:0: Attached scsi generic sg1 type 0
scsi 8:0:0:0: Attached scsi generic sg2 type 5
scsi 8:0:1:0: Attached scsi generic sg3 type 5
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0a.0 to 64
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
sr 8:0:1:0: Attached scsi CD-ROM sr1
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:81:c7:63
forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f3026000-f30267ff] Max Packet=[4096] IR/IT contexts=[4/8]
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 54480 usecs
intel8x0: clocking to 46977
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
phy0: Selected rate control algorithm 'pid'
Floppy drive(s): fd0 is 1.44M
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
FDC 0 is a post-1991 82077
rtc0: alarms up to one year, y3k
IT8712 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001485560081d179]
ppdev: user-space parallel port driver
Adding 2097144k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:2097144k
JBD: barrier-based sync failed on dm-1 - disabling barriers
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1220543060.915:2): operation="profile_load" name="/bin/ping" name2="default" pid=1537
type=1505 audit(1220543060.955:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1542
type=1505 audit(1220543061.007:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1545
type=1505 audit(1220543061.047:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1551
type=1505 audit(1220543061.103:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1553
type=1505 audit(1220543061.151:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1559
type=1505 audit(1220543061.199:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1566
type=1505 audit(1220543061.275:9): operation="profile_load" name="/usr/sbin/named" name2="default" pid=1574
type=1505 audit(1220543061.323:10): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1579
type=1505 audit(1220543061.427:11): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1581
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
Marking TSC unstable due to cpufreq changes
Clocksource tsc unstable (delta = -117989286 ns)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 17
Loading iSCSI transport class v2.0-869.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
eth0: no IPv6 routers present
bootsplash: status on console 0 changed to on
JBD: barrier-based sync failed on dm-0 - disabling barriers
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A

ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: soft resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: failed to read native max address (err_mask=0x20)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
sd 1:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA


ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: soft resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: failed to read native max address (err_mask=0x20)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
sd 1:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA


ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x190002 action 0xa frozen
ata2.00: hotplug_status 0x2
ata2: SError: { RecovComm PHYRdyChg 10B8B Dispar }
ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res ff/ff:ff:ff:ff:ff/00:00:00:00:00/ff Emask 0x12 (ATA bus error)
ata2.00: status: { Busy }
ata2.00: error: { ICRC UNC IDNF ABRT }
ata2: soft resetting link
ata2: SRST failed (errno=-19)
ata2: reset failed (errno=-19), retrying in 8 secs
ata2: hard resetting link
ata2: port is slow to respond, please be patient (Status 0xff)
ata2: COMRESET failed (errno=-16)
ata2: hard resetting link
ata2: port is slow to respond, please be patient (Status 0xff)
ata2: COMRESET failed (errno=-16)
ata2: limiting SATA link speed to 1.5 Gbps
ata2: hard resetting link
ata2: COMRESET failed (errno=-16)
ata2: reset failed, giving up
ata2.00: disabled
ata2: EH complete
sd 1:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 63
Buffer I/O error on device sda1, logical block 0
Buffer I/O error on device sda1, logical block 1
Buffer I/O error on device sda1, logical block 2
Buffer I/O error on device sda1, logical block 3
Buffer I/O error on device sda1, logical block 4
Buffer I/O error on device sda1, logical block 5
Buffer I/O error on device sda1, logical block 6
Buffer I/O error on device sda1, logical block 7
Buffer I/O error on device sda1, logical block 8
Buffer I/O error on device sda1, logical block 9
sd 1:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 63
sd 1:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 65
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:14:85:81:c7:63:00:14:6c:c3:fd:e6:08:00 SRC=192.168.1.1 DST=192.168.1.27 LEN=29 TOS=0x00 PREC=0x00 TTL=64 ID=26 DF PROTO=UDP SPT=2702 DPT=7 LEN=9
sd 1:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 63
FAT: unable to read boot sector