• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] Programmabbruch bei tar

K

kschrader

Member
Hallo,
ich wollte soeben mittels tar mein Home-Verzeichnis sichern. Jedoch wird der Vorgang immer mittendrin abgebrochen, ohne weiteren Hinweis auf den Fehler.
Ich nutzen tar mit dem Befehl: tar cvf /media/disk/Backup-1.tar /home/
Es kommt dann nach einiger Zeit die Ausgabe: tar: /media/disk/Backup-1.tar: Nur 4095 von 10240 Bytes geschrieben
tar: Nicht behebbarer Fehler: Programmabbruch.

Bei mehreren Versuchen lag der Abbruch übrigens immer bei 4095 von 10240 Bytes, unabhängig von der Größe des zu archivierenden Verzeichnisses.
Weiß jemand, woran das liegen kann?

Viele Grüße,
Konstantin
 
OP
K

kschrader

Member
Das kann eigentlich nicht sein, da der Abbruch immer bei Dateien stattfand, die definitiv nicht in Bearbeitung waren.
 
A

Anonymous

Gast
kschrader schrieb:
Das kann eigentlich nicht sein, da der Abbruch immer bei Dateien stattfand, die definitiv nicht in Bearbeitung waren.
Zum Vergrößern anklicken....
tar sichert alles was da ist, ob zum lesen oder zum schreiben geöffnet ist tar egal, wird alles mitgesichert. Wie es aussieht kann tar den Fehler selbst nicht eingrenzen, könnten das Schreibfehler sein? Platte voll? defekte Blöcke oÄ. ? Wie lange braucht er denn so für die lächerlichen 4KB wenn du sagst mittendrinn / nach einiger Zeit, oder ist das ein Schreibfehler ? Schau mal was dmesg sagt oder was in /var/log/messages am Ende steht, nachdem er so abbricht.

robi
 
OP
K

kschrader

Member
Die Angabe mit dem 4kb ist von tar nicht richtig, da die Datei dann immer schon eine Größe zwischen 2 und 4GB hat. Aber der angegebene Wert war bei allen Versuchen der gleiche, unabhängig davon, wie groß das erstellte Archiv schon war.

Ergebnis dmesg:
Code: 
Konstantin@linux-up1z:~> dmesg
Linux version 2.6.25.5-1.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200
Command line: root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HM250JIS0TVJD0Q298879-part7 resume=/dev/sda6 splash=silent showopts vga=0x317
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000be6b0000 (usable)
 BIOS-e820: 00000000be6b0000 - 00000000be6cc000 (ACPI data)
 BIOS-e820: 00000000be6cc000 - 00000000be700000 (ACPI NVS)
 BIOS-e820: 00000000be700000 - 00000000bf000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 779952) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F6950, 0024 (r2 LENOVO)
ACPI: XSDT BE6BD47A, 0094 (r1 LENOVO TP-7N        2140  LTP        0)
ACPI: FACP BE6BD600, 00F4 (r3 LENOVO TP-7N        2140 LNVO        1)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
ACPI: DSDT BE6BD9DB, E218 (r1 LENOVO TP-7N        2140 MSFT  3000000)
ACPI: FACS BE6E4000, 0040
ACPI: SSDT BE6BD7B4, 0227 (r1 LENOVO TP-7N        2140 MSFT  3000000)
ACPI: ECDT BE6CBBF3, 0052 (r1 LENOVO TP-7N        2140 LNVO        1)
ACPI: TCPA BE6CBC45, 0032 (r2 LENOVO TP-7N        2140 LNVO        1)
ACPI: APIC BE6CBC77, 0068 (r1 LENOVO TP-7N        2140 LNVO        1)
ACPI: MCFG BE6CBCDF, 003C (r1 LENOVO TP-7N        2140 LNVO        1)
ACPI: HPET BE6CBD1B, 0038 (r1 LENOVO TP-7N        2140 LNVO        1)
ACPI: SLIC BE6CBDF0, 0176 (r1 LENOVO TP-7N        2140  LTP        0)
ACPI: BOOT BE6CBF66, 0028 (r1 LENOVO TP-7N        2140  LTP        1)
ACPI: ASF! BE6CBF8E, 0072 (r16 LENOVO TP-7N        2140 PTL         1)
ACPI: SSDT BE6E26D9, 025F (r1 LENOVO TP-7N        2140 INTL 20050513)
ACPI: SSDT BE6E2938, 00A6 (r1 LENOVO TP-7N        2140 INTL 20050513)
ACPI: SSDT BE6E29DE, 04F7 (r1 LENOVO TP-7N        2140 INTL 20050513)
ACPI: SSDT BE6E2ED5, 01D8 (r1 LENOVO TP-7N        2140 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad X61
ACPI: Added _OSI(Linux)
No NUMA configuration found
Faking a node at 0000000000000000-00000000be6b0000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 779952) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-00000000be6b0000
  NODE_DATA [000000000000d000 - 0000000000014fff]
  bootmap [0000000000015000 -  000000000002ccd7] pages 18
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-8b5bd7] TEXT DATA BSS
early res: 3 [37a73000-37feff25] RAMDISK
early res: 4 [9d800-9e7ff] EBDA
early res: 5 [8000-cfff] PGTABLE
 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
 [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
 [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
 [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
 [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
 [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
 [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
 [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      157
    0:      256 ->   779952
On node 0 totalpages: 779853
  DMA zone: 56 pages used for memmap
  DMA zone: 1728 pages reserved
  DMA zone: 2213 pages, LIFO batch:0
  DMA32 zone: 10607 pages used for memmap
  DMA32 zone: 765249 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: bf000000:31000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 47936 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 767462
Policy zone: DMA32
Kernel command line: root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HM250JIS0TVJD0Q298879-part7 resume=/dev/sda6 splash=silent showopts vga=0x317
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 1995.007 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3063500k/3119808k available (2365k kernel code, 55912k reserved, 1920k data, 404k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay using timer specific routine.. 3996.10 BogoMIPS (lpj=7992205)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 1785 Objects with 75 Devices 458 Methods 34 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 11 Objects with 0 Devices 7 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 14 Objects with 0 Devices 5 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0006) - 14 Objects with 1 Devices 2 Methods 0 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
Using local APIC timer interrupts.
APIC timer calibration result 12468802
Detected 12.468 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=7980132)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 326720 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000003
  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
  domain 1: span 00000000,00000000,00000000,00000003
   groups: 00000000,00000000,00000000,00000003
CPU1 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000003
  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
  domain 1: span 00000000,00000000,00000000,00000003
   groups: 00000000,00000000,00000000,00000003
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 3 Runtime GPEs in this block
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
Completing Region/Field/Buffer/Package initialization:.....................................................................................................................................................................................................................................................................
Initialized 30/34 Regions 122/122 Fields 52/52 Buffers 57/73 Packages (1844 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.<5>ACPI: BIOS _OSI(Linux) query honored via DMI
.........
Executed 10 _INI methods requiring 2 _STA executions (examined 82 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff has been reserved
system 00:00: iomem range 0xc4000-0xc7fff has been reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xbeffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-2fff
  MEM window: 0xfc000000-0xfdffffff
  PREFETCH window: 0x00000000f8000000-0x00000000f80fffff
PCI: Bridge: 0000:00:1c.1
  IO window: 3000-3fff
  MEM window: 0xdc100000-0xdfcfffff
  PREFETCH window: 0x00000000dfe00000-0x00000000dfefffff
PCI: Bus 6, cardbus bridge: 0000:05:00.0
  IO window: 0x00004000-0x000040ff
  IO window: 0x00004400-0x000044ff
  PREFETCH window: 0xf4000000-0xf7ffffff
  MEM window: 0xc0000000-0xc3ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 4000-7fff
  MEM window: 0xf8300000-0xfbffffff
  PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5619k freed
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1219619370.736:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20005100000, using 6144k, total 7616k
vesafb: mode is 1024x768x16, linelength=2048, pages=3
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 166113 bytes
bootsplash: ...found (1024x768, 154167 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial 00:0a: activated
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
registered taskstats version 1
Freeing unused kernel memory: 404k freed
Write protecting the kernel read-only data: 1680k
ACPI: SSDT BE6E1B32, 02C4 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
Parsing all Control Methods:
Table [SSDT](id 001D) - 6 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT BE6E1E7B, 085E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
Parsing all Control Methods:
Table [SSDT](id 001E) - 16 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BE6E1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
Parsing all Control Methods:
Table [SSDT](id 0029) - 4 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT BE6E1DF6, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
Parsing all Control Methods:
Table [SSDT](id 002A) - 1 Objects with 0 Devices 1 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (48 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [THM1] (46 C)
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
IBM TrackPoint firmware: 0x0e, buttons: 3/3
Clocksource tsc unstable (delta = -386644666 ns)
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 4349
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 4349
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HM250JI, HS100-08, max UDMA7
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM250JI  HS10 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
ata4.00: ATAPI: MATSHITADVD-RAM UJ-842, RB01, max UDMA/33
ata4.00: configured for UDMA/33
ata5: port disabled. ignoring.
scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-842   RB01 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
 sda1 sda2 sda3<7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.7
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-4: new high speed USB device using ehci_hcd and address 2
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25.5-1.1-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
usb 3-4: configuration #1 chosen from 1 choice
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 4 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.25.5-1.1-default ehci_hcd
usb usb6: SerialNumber: 0000:00:1d.7
usb 3-4: New USB device found, idVendor=17ef, idProduct=1000
usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
PM: Starting manual resume from disk
usb 6-2: new high speed USB device using ehci_hcd and address 2
usb 6-2: configuration #1 chosen from 1 choice
usb 6-2: New USB device found, idVendor=0d49, idProduct=3200
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2: Product: Maxtor 3200
usb 6-2: Manufacturer: Maxtor Corporation
usb 6-2: SerialNumber: UA04G5HC
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 3-4.4: new low speed USB device using ehci_hcd and address 3
usb 3-4.4: configuration #1 chosen from 1 choice
usb 3-4.4: New USB device found, idVendor=046d, idProduct=c018
usb 3-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4.4: Product: USB Optical Mouse
usb 3-4.4: Manufacturer: Logitech
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:19.0 to 64
ACPI: Sleep Button (CM) [SLPB]
eth0: (PCI Express:2.5GB/s:Width x1) 00:16:d3:c4:39:98
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
iTCO_vendor_support: vendor-support=0
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
thinkpad_acpi: ThinkPad ACPI Extras v0.19
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7NETB4WW (2.14 ), EC 7MHT25WW-1.03
thinkpad_acpi: Lenovo ThinkPad X61
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
input: ThinkPad Extra Buttons as /devices/virtual/input/input6
ACPI: device:03 is registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input7
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI: device:08 is registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/device:07/input/input8
Initializing USB Mass Storage driver...
scsi5 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb3/3-4/3-4.4/3-4.4:1.0/input/input9
ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f8301000-f83017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.7-4.4
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:05:00.2 [1180:0822] (rev 21)
ACPI: PCI Interrupt 0000:05:00.2[C] -> GSI 18 (level, low) -> IRQ 18
sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
PCI: Setting latency timer of device 0000:05:00.2 to 64
mmc0: SDHCI at 0xf8301800 irq 18 DMA
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
Yenta: CardBus bridge found at 0000:05:00.0 [17aa:20c6]
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Yenta: ISA IRQ mask 0x0438, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
ppdev: user-space parallel port driver
phy0: Selected rate control algorithm 'iwl-3945-rs'
scsi 5:0:0:0: Direct-Access     Maxtor   3200             0344 PQ: 0 ANSI: 4
sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 17 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 17 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0016d3ffffc43998]
Adding 2109200k swap on /dev/sda6.  Priority:-1 extents:1 across:2109200k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1219612184.967:2): operation="profile_load" name="/bin/ping" name2="default" pid=1802
type=1505 audit(1219612185.083:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1845
type=1505 audit(1219612185.155:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1849
type=1505 audit(1219612185.292:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1868
type=1505 audit(1219612185.367:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1870
type=1505 audit(1219612185.399:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1894
type=1505 audit(1219612185.427:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1896
type=1505 audit(1219612185.472:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1897
type=1505 audit(1219612185.531:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1898
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bootsplash: status on console 0 changed to on
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=489 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=469
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=489 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=469
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=489 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=469
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=453 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=433
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000003
  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
  domain 1: span 00000000,00000000,00000000,00000003
   groups: 00000000,00000000,00000000,00000003
CPU1 attaching sched-domain:
 domain 0: span 00000000,00000000,00000000,00000003
  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
  domain 1: span 00000000,00000000,00000000,00000003
   groups: 00000000,00000000,00000000,00000003
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.39 DST=72.14.221.127 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=51972 DF PROTO=TCP SPT=23282 DPT=80 WINDOW=96 RES=0x00 ACK FIN URGP=0 OPT (0101080A00018C9AC9687329)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.39 DST=83.243.58.157 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39185 DF PROTO=TCP SPT=20120 DPT=80 WINDOW=55 RES=0x00 ACK FIN URGP=0 OPT (0101080A00018C9B33CABC4D)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.39 DST=83.243.58.157 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39186 DF PROTO=TCP SPT=20120 DPT=80 WINDOW=55 RES=0x00 ACK FIN URGP=0 OPT (0101080A00018CDB33CABC4D)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.39 DST=72.14.221.127 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=51973 DF PROTO=TCP SPT=23282 DPT=80 WINDOW=96 RES=0x00 ACK FIN URGP=0 OPT (0101080A00018CDCC9687329)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.39 DST=83.243.58.157 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39187 DF PROTO=TCP SPT=20120 DPT=80 WINDOW=55 RES=0x00 ACK FIN URGP=0 OPT (0101080A00018D5B33CABC4D)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.39 DST=83.243.58.157 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39192 DF PROTO=TCP SPT=20120 DPT=80 WINDOW=55 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001AC5B33CABC4D)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.39 DST=83.243.58.157 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39193 DF PROTO=TCP SPT=20120 DPT=80 WINDOW=55 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001CC5B33CABC4D)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.39 DST=72.14.221.127 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=51980 DF PROTO=TCP SPT=23282 DPT=80 WINDOW=96 RES=0x00 ACK FIN URGP=0 OPT (0101080A0001CE58C9687329)
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=489 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=469
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=489 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=469
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=489 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=469
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.39 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44

Ergebnis logfile:
Code: 
Aug 25 00:14:17 linux-up1z gconfd (Konstantin-6475): (Version 2.22.0) wird gestartet, Prozesskennung 6475, Benutzer »Konstantin«
Aug 25 00:14:17 linux-up1z gconfd (Konstantin-6475): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory«wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Aug 25 00:14:17 linux-up1z gconfd (Konstantin-6475): Die Adresse »xml:readwrite:/home/Konstantin/.gconf« wurdean der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
Aug 25 00:14:17 linux-up1z gconfd (Konstantin-6475): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Aug 25 00:14:17 linux-up1z gconfd (Konstantin-6475): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.vendor« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Aug 25 00:14:17 linux-up1z gconfd (Konstantin-6475): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.schemas« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst
 
A

Anonymous

Gast
Die lange Liste dmesg kannst du getrost wieder rauslöschen, Schreibfehler stehen jedenfalls keine drin.
Das nächste mal bitte so hier, http://www.linux-club.de/viewtopic.php?f=48&t=67358

da die Datei dann immer schon eine Größe zwischen 2 und 4GB hat.
Zum Vergrößern anklicken....
klingelt da was bei mir ?
Auf was für ein Filesystem schreibst du das Archiv? Doch nicht etwa FAT32, dort ist definitiv <4GB maximale Dateigröße.
gib mal die Ausgaben von mount und df -k

robi
 
OP
K

kschrader

Member
robi schrieb:
Auf was für ein Filesystem schreibst du das Archiv? Doch nicht etwa FAT32, dort ist definitiv <4GB maximale Dateigröße.
gib mal die Ausgaben von mount und df -k

robi
Zum Vergrößern anklicken....

Das war der Fehler. Die externe Platte ist wirklich mit FAT32 formatiert. Vielen Dank.

Konstantin
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben