• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Suse kann home partion nicht lesen[gelöst]

J

jay-jey

Member
Hallo, also ich hatte letzten ein problem mit konqueror und hab mir gedacht ihn einfach zu aktualisieren, jetzt hab ich aber das Problem, dass Suse 11 nicht mehr startet. Beim starten kommt immer

Cannot enter home directory
An fatal crash ... please see kdm logfiles

hoffe ihr könnt mir helfen hab mir auch mal die kdm.log angesehen werd aber nicht schlau draus.
würde sie auch gerne auf phpfi.com posten aber ich glaub das funzt im Moment nicht aber vielleich könnt ihr mir ja auch so helfen
 
L

lOtz1009

Moderator
Teammitglied
Wie hattest du bitte vor einfach so den Konqueror upzudaten?
An welcher Stelle genau kommt diese Fehlermeldung?
Und nein, ich glaube nicht, dass man dir ohne die entsprechenden Logs gescheit helfen kann.
 
OP
J

jay-jey

Member
über yast und die Software verwaltung

nach dem ersten Stratbildschirm wenn zum ersten mal die Maus erscheint

ja hab ich mir auch gedacht aber leider kommt immer wenn ich den Post absenden will nicht http://phpfi.com/1234567 sonder nur http://phpfi.com/?
 
OP
J

jay-jey

Member
man ich bin auch ein wenig dämlich ich kann ja auch einfach die Datei hochladen wenn ich wüste in welchem format ich hochladen darf
 
L

lOtz1009

Moderator
Teammitglied
Du könntest da im Prinzip die ganze kdm.log hochladen, aber halt nur max. 100kb. Das wird das Problem sein.
Beschränk dich auf den letzten Abschnitt der /var/log/kdm.log also quasi den Teil von heute bis zu dem Zeitpunkt wo du rumgefrickelt hast und poste es dort.
 
OP
J

jay-jey

Member
Code: 
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul  6 12:08:14 2008
(==) Using config file: "/etc/X11/xorg.conf"
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(II) Module "ddc" already built-in
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(II) Module "ramdac" already built-in
[atiddx] ASYNCIO init succeed!
Receive enable interrupt ret message
...irqEnableMask: 20008000
...dwIRQEnableId: 00000008
Receive enable interrupt ret message
...irqEnableMask: 10000000
...dwIRQEnableId: 00000009
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Could not init font path element /usr/share/fonts/TTF/, removing from list!
Could not init font path element /usr/share/fonts/OTF, removing from list!
Driver not XRANDR 1.2 capable, ignoring DISPLAYMANAGER_RANDR_MODE_* settings
Could not initialise connection to hald.
Normally this means the HAL daemon (hald) is not running or not ready.
Could not initialise connection to hald.
Normally this means the HAL daemon (hald) is not running or not ready.
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-oy8n 2.6.25.5-1.1-pae #1 SMP 2008-06-07 01:55:22 +0200 i686
Build Date: 16 June 2008  03:12:42PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul  6 12:08:40 2008
(==) Using config file: "/etc/X11/xorg.conf"
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(II) Module "ddc" already built-in
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(II) Module "ramdac" already built-in
[atiddx] ASYNCIO init succeed!
Receive enable interrupt ret message
...irqEnableMask: 20008000
...dwIRQEnableId: 00000008
Receive enable interrupt ret message
...irqEnableMask: 10000000
...dwIRQEnableId: 00000009
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Could not init font path element /usr/share/fonts/TTF/, removing from list!
Could not init font path element /usr/share/fonts/OTF, removing from list!
Driver not XRANDR 1.2 capable, ignoring DISPLAYMANAGER_RANDR_MODE_* settings
Could not initialise connection to hald.
Normally this means the HAL daemon (hald) is not running or not ready.
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
 
OP
J

jay-jey

Member
und hier noch die boot.msg
Code: 
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 
/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7: clean, 199351/1291808 files, 1280311/5164889 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7

Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Jul  6 14:07:13 2008

done
Starting udevd: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/sda7 is already mounted on /

Setting up the hardware clockdone
Activating device mapper...
done
Checking file systems...
fsck 1.40.8 (13-Mar-2008)
/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part6: clean, 5091/3671024 files, 2542614/14681394 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda6 on /home type ext3 (rw,acl,user_xattr)
/dev/sda7 on /root type ext3 (rw,acl,user_xattr)
ntfs-3g: Failed to access volume '/dev/disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJ1NP201096-part5': No such file or directory
Please type '/sbin/mount.ntfs-3g --help' for more information.
/dev/sda8 on /windows/Datentausch type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
failedFuse filesystem already availabledone
Mounting fuse control filesystemdone
Retry device configuration: done
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Activating remaining swap-devices in /etc/fstab...
done<notice>killproc: kill(637,29)
Creating /var/log/boot.msg
doneMounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Setting up hostname 'linux-oy8n'done
Setting up loopback interface     lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(637,3)

INIT: 
Boot logging started on /dev/tty1(/dev/console) at Sun Jul  6 12:07:22 2008

Master Resource Control: previous runlevel: N, switching to runlevel: 5
Starting D-Bus daemondone
Starting resource manager<notice>Entering runlevel: 5


startproc: execve (/sbin/resmgrd) [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
 /sbin/resmgrd ], [done
Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/root PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/root PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Starting acpid <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/sbin/acpid ]
done
Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
done
Loading CPUFreq modulesdone
Starting HAL daemondone
Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/root LANG=de_DE.UTF-8 PREVLEVEL=N LINES=44 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde4 SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/bin/kdm ]
done
Setting up network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done    eth0      device: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
    eth0      (DHCP) . . <notice>pidofproc: dhcpcd 3145
<notice>killproc: kill(2647,20)
<notice>killproc: kill(2644,1)
<notice>killproc: kill(2647,18)
<notice>killproc: kill(2647,12)
IP/Netmask: '192.168.0.156' / '255.255.255.0' 
doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
Starting Samba NMB daemon <notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
done
Mount CIFS File Systems unused
<notice>checkproc: /usr/bin/kdm 2839
Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
done<notice>killproc: kill(2829,15)
Loading console font lat9w-16.psfu  -m trivial G0:loadable
done<notice>checkproc: /usr/bin/kdm 2839
Starting atieventsddone
Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/sbin/auditd ]
done
Starting Avahi daemon<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
.<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting java.binfmt_misc done
Starting Name Service Cache Daemondone
Starting cupsddone
Initializing random number generatordone
<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
Starting Samba SMB daemon done
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
Checking/updating CPU microcode done
Starting powersaved: done
Starting btnx : Button Extension - mouse button rerouter daemon
 btnx: uinput modprobed successfully.
 btnx: Opening config file: /etc/btnx/btnx_config_Default
 btnx: No startup errors.
 btnx: Parent done.
btnx successfully started
..Starting mail service (Postfix)done
.<notice>checkproc: /usr/bin/kdm 2839
Starting VirtualBox host networkingdone
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
<notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting smartd done
Starting SSH daemondone
..Starting VirtualBox kernel moduledone
....done
Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/root SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
startproc:  exit status of parent of /usr/sbin/avahi-dnsconfd: 1
failed
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: avahi-dnsconfd
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(2602,3)
 
L

lOtz1009

Moderator
Teammitglied
Auf jeden Fall findet er eine Partition nicht.
ntfs-3g: Failed to access volume '/dev/disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJ1NP201096-part5': No such file or directory
Please type '/sbin/mount.ntfs-3g --help' for more information.
Zum Vergrößern anklicken....
Ausgaben von:
Code: 
fdisk -l (kleines L)
Code: 
cat /etc/fstab
 
OP
J

jay-jey

Member
ja stimmt die partion hab ich irgendwann mal gelöscht aber daran liegt es nicht hab es grad ausprobiert und die zeile in der fstab gelöscht hat aber nichts gebracht. aber ich bin grade erst auf die Idee gekommen micht mal als root anzumelden und schubs alles geht. Meine vermutung wäre nun kann sich irgendwas mit den Rechten für das home verzeichniss geändert haben? und wie bekomm ich das raus und änder das wieder?
 
S

spoensche

Moderator
Teammitglied
Poste mal die Ausgaben der Befehle, die dir IOtz an die Hand gegeben hat.

Dein FGLRX Treiber ist auch nicht richtig installiert bzw. konfiguriert, wie es aus

Code: 
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.
(II) Module "ddc" already built-in
(EE) fglrx(0): vm86() syscall generated signal 11.
(EE) fglrx(0): vm86() syscall generated signal 11.

deutlich hervorgeht.
 
OP
J

jay-jey

Member
Fdisk:
Code: 
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xe91c6672

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        5100       10198    40957717+   7  HPFS/NTFS
/dev/sda2           10199       30401   162280597+   f  W95 Ext'd (LBA)
/dev/sda5           10199       10721     4200966   82  Linux swap / Solaris
/dev/sda6           10722       18032    58725576   83  Linux
/dev/sda7           18033       20604    20659558+  83  Linux
/dev/sda8           20605       30401    78694371    c  W95 FAT32 (LBA)

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x6bdcd890

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1        7649    61440561    7  HPFS/NTFS
/dev/sdb2            7650       17210    76798732+   7  HPFS/NTFS
/dev/sdb3           17211       60801   350144707+   7  HPFS/NTFS
und fstab:
Code: 
/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part7 /root                ext3       acl,user_xattr        1 1
/dev/sda7            /                    ext3       defaults              1 1
/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part5 swap                 swap       defaults              0 0
/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part6 /home                ext3       acl,user_xattr        1 0
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJ1NP201096-part1 /windows/XP          ntfs-3g    users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJ1NP201096-part2 /windows/Daten       ntfs-3g    users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJ1NP201096-part3 /windows/Video       ntfs-3g    users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
proc                 /proc                proc       defaults              0 0
sysfs                /sys                 sysfs      noauto                0 0
debugfs              /sys/kernel/debug    debugfs    noauto                0 0
usbfs                /proc/bus/usb        usbfs      noauto                0 0
devpts               /dev/pts             devpts     mode=0620,gid=5       0 0
/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part8 /windows/Datentausch vfat       users,gid=users,umask=0002,utf8=true 0 0
/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part1 /windows/Vista       ntfs-3g    users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
 
L

lOtz1009

Moderator
Teammitglied
Irgendwie scheint mir deine fstab etwas durcheinander. Mach mal ein Backup und ändere Folgendes um:

Code: 
/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part6 /home                ext3       acl,user_xattr        1 0
Zum Vergrößern anklicken....
Code: 
/dev/disk/by-id/scsi-SATA_ST3250410AS_6RY6KT5B-part6 /home                ext3       defaults                1 2
 
OP
J

jay-jey

Member
so hab das problem jetzt gelöst. War doch irgendwie Konqueror hatte das Programm zwischendurch zwar schonmal wieder deinstalliert und installiert aber irgendwie hat das wohl nicht gefunzt oder ich hab die falsche Version benutzt egal jetzt geht wieder alles...


@LOtz Hab da aber doch nochmal eine Frage zu deinem letzten Post. Hab mir mal ne Fstab erklärung durchgelesen, wenn ich die Home Partition auf "default" setze kann ein normaler user sie doch nicht mounten oder? Und was bedeuten eingentlich die Zahlen hinter einem Eintrag in der Fstab das hab ich auch noch nicht raus bekommem.

Naja bin erstmal froh, dass alles wieder läuft und jetzt kann ich mich meinem fglrx-treiber widmen der scheint ja auch nicht richtig zu funzen (hatte das ganze doch was gutes: ich hab raus bekommen das da was nicht stimmt, aber das versuch ich erstmal alleine...)

Ach und alle die versucht haben mir zu helfen:

recht herzlichen Dank
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben