Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

PC geht aus / OpenSuse deinstallieren

Alles rund um die Systemverwaltung, die Administration und Konfiguration Eures Linuxsystems

Moderator: Moderatoren

Antworten
linuxprobleme
Newbie
Newbie
Beiträge: 5
Registriert: 30. Dez 2007, 03:15

PC geht aus / OpenSuse deinstallieren

Beitrag von linuxprobleme » 30. Dez 2007, 03:51

Hallo,
vor kurzem war im CT Magazin OpenSuse 10.3 drin.
Hab ich mir gekauft und gleich, neben Vista (V. war schon drauf), als Partition auf mein neues (erstes) Notebook installiert.
Falls jemand die Daten will:
http://www.notebooksbilliger.de/product ... 0f39190ad9

Ich habe nun folgende(s) Problem(e):

1. NB an; Grub lädt; Auswahl Vista = alles läuft, keine Probleme.
ABER: NB an; Grub lädt; Auswahl Linux = startet normal, System läuft auch (scheinbar) normal ABER nach ca. 33 Minuten geht das NB plötzlich aus, egal ob ich ein Programm auf habe oder nicht (auch im Netzbetrieb). Erst dachte ich, es lag an der Hitze (es wurde ziemlich heiß), habs also nach einigem rumprobieren mal eingeschickt. Die haben alles getausch (CPU, GraKa, Mainboard), aber es wird immernoch ziemlich heiß (aber auch unter Vista, doch da gehts halt nicht aus).

Es ist mein erstes Linux, mein erster Laptop (eigener PC) und mein erster Eintrag in dem Forum (ich hoffe ich bin hier richtig).
Bei der Installation war ich bei der Partitionierung leicht verunsichert.

Evtl. auch interessant: Nach dieser (1.) Installation gab es noch keine Passwortabfrage beim Systemstart.

Ich habe mir gedacht, vielleicht ist irgendwas schief gelaufen und hab dann alles nochmal drüberinstalliert. Danach kam wenigstens die Passwortabfrage, aber mein eigentliches Problem, dass der PC ausgeht, hatte ich immernoch.

2. Ich hatte genug von Linux (obwohl es mir an sonsten sehr zugesagt hat) und wollte es deinstallieren. Hab mal gegooglet und es auf 2 verschiedene Arten versucht -ohne Erfolg.


BITTE HELFT MIR!!!!!

Am liebsten wäre mir, wenn mir jemand erklärt, warum mein NB plötzlich ausgeht und wie ich das beheben kann.

Falls euch dazu keine Lösung einfällt, dann brauche ich jemanden, der mir das Löschen und die Auflösung der Partitionen erklärt.

Schonmal DANKE
Gruß


P.S.: Bitte schreibt so, dass ich es verstehe und nicht in der "Computerprofi-Fachwort-Schrift" :-)

Werbung:
Benutzeravatar
whois
Administrator
Administrator
Beiträge: 16606
Registriert: 11. Okt 2004, 08:50
Wohnort: Aachen
Kontaktdaten:

Beitrag von whois » 30. Dez 2007, 09:24

Hi

Das ist ein bisschen schwer zu sagen woran das liegt so ohne Fehlermeldung. :wink:
Zeig uns doch bitte mal den Inhalt von folgendem File.

Code: Alles auswählen

/var/log/boot.msg
Vielleicht können wir dann mehr sagen.

Benutzeravatar
Martin Breidenbach
Ultimate Guru
Ultimate Guru
Beiträge: 5632
Registriert: 26. Mai 2004, 21:33
Wohnort: N 50.17599° E 8.73367°

Beitrag von Martin Breidenbach » 30. Dez 2007, 12:41

Mein erster Verdacht wäre da ein vergurktes Powermanagement und der erste Ort wo ich nachsehe die /var/log/messages

Ist das mit den 33 Minuten nach Inaktivität oder auch während man arbeitet ?
Nicht Böse sein ! Der Onkel macht doch nur Spaß !

linuxprobleme
Newbie
Newbie
Beiträge: 5
Registriert: 30. Dez 2007, 03:15

Beitrag von linuxprobleme » 2. Jan 2008, 00:16

Hallo,
also Powermanagement glaube ich nicht, da es Mitten im Programm ausgeht. D.h. ich hatte z.B. mal OpenOffice offen, habe geschrieben, plötzlich AUS. Heute ging es übrigens schon nach 22 Min aus. Und als ich es dann erneut hochfahren wollte, ging's sogar nach wenigen Sekunden aus. (Er hatte noch nicht mal Grub geladen.) Ich habe ca. eine halbe Stunde gewartet und ihn erst dann wieder an gemacht, dann ging er wieder "normal", aber ICH habe ihn gleich nach ein paar Minuten (ca. 10) wieder (ganz normal) aus gemacht, kann also nicht sagen, wie lange er "gelebt" hätte.

Ich musste mich erstmal etwas zurechtfinden in Linux (wie gesagt, mein erstes).
Ich habe unter:
Yast Kontrollzentrum-->Systemprotokoll anzeigen-->/var/log/messages
und unter:
Yast Kontrollzentrum-->Systemprotokoll anzeigen-->/var/log/boot.msg
extrem viel gefunden (2825 Zeile) gefunden. Soll ich die wirklich alle posten?!? :shock:

Bitte nicht über Datum / Uhrzeit wundern; habe ich nach dem Komponententausch noch nicht aktualisiert.

SCHÖNES NEUES JAHR!!!

linuxprobleme
Newbie
Newbie
Beiträge: 5
Registriert: 30. Dez 2007, 03:15

Was ich gefunden habe...

Beitrag von linuxprobleme » 2. Jan 2008, 00:20

Yast Kontrollzentrum-->Systemprotokoll anzeigen-->/var/log/boot.msg


Inspecting /boot/System.map-2.6.22.5-31-default
Loaded 26158 symbols from /boot/System.map-2.6.22.5-31-default.
Symbols match kernel version 2.6.22.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
<4> BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007ff50000 (usable)
<4> BIOS-e820: 000000007ff50000 - 000000007ff65000 (ACPI data)
<4> BIOS-e820: 000000007ff65000 - 000000007ff66000 (ACPI NVS)
<4> BIOS-e820: 000000007ff66000 - 0000000080000000 (reserved)
<4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<5>1151MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000f7c90
<7>Entering add_active_range(0, 0, 524112) 0 entries of 256 used
<4>Zone PFN ranges:
<4> DMA 0 -> 4096
<4> Normal 4096 -> 229376
<4> HighMem 229376 -> 524112
<4>early_node_map[1] active PFN ranges
<4> 0: 0 -> 524112
<7>On node 0 totalpages: 524112
<7> DMA zone: 32 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 4064 pages, LIFO batch:0
<7> Normal zone: 1760 pages used for memmap
<7> Normal zone: 223520 pages, LIFO batch:31
<7> HighMem zone: 2302 pages used for memmap
<7> HighMem zone: 292434 pages, LIFO batch:31
<6>DMI present.
<6>Using APIC driver default
<4>ACPI: RSDP 000F7CA0, 0024 (r2 ACRSYS)
<4>ACPI: XSDT 7FF5E2B5, 005C (r1 ACRSYS ACRPRDCT 6040000 LTP 0)
<4>ACPI: SLIC 7FF64A4A, 0176 (r1 ACRSYS ACRPRDCT 6040000 LOHR 0)
<4>ACPI: FACP 7FF64BC0, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240)
<4>ACPI: DSDT 7FF5E311, 66C5 (r1 NVIDIA MCP67 6040000 MSFT 3000000)
<4>ACPI: FACS 7FF65FC0, 0040
<4>ACPI: SSDT 7FF64CB4, 0248 (r1 PTLTD POWERNOW 6040000 LTP 1)
<4>ACPI: MCFG 7FF64EFC, 003C (r1 Nvidia NVDAACPI 6040000 NVDA 0)
<4>ACPI: HPET 7FF64F38, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
<4>ACPI: APIC 7FF64F70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
<4>ACPI: BOOT 7FF64FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
<6>ACPI: PM-Timer IO Port: 0x1008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 15:8 APIC version 16
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<4>Processor #1 15:8 APIC version 16
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode: Flat. Using 1 I/O APICs
<6>ACPI: HPET id: 0x10de8201 base: 0xfed00000
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
<4>Built 1 zonelists. Total pages: 520018
<5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 vga=0x314 resume=/dev/sda6 splash=silent
<6>bootsplash: silent mode.
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<4>Detected 2200.424 MHz processor.
<7>spurious 8259A interrupt: IRQ7.
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2070380k/2096448k available (1825k kernel code, 24680k reserved, 764k data, 228k init, 1178944k highmem)
<4>virtual kernel memory layout:
<4> fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
<4> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
<4> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
<4> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
<4> .init : 0xc038e000 - 0xc03c7000 ( 228 kB)
<4> .data : 0xc02c86ed - 0xc0387964 ( 764 kB)
<4> .text : 0xc0100000 - 0xc02c86ed (1825 kB)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
<6>hpet0: 3 32-bit timers, 25000000 Hz
<4>Calibrating delay using timer specific routine.. 4404.97 BogoMIPS (lpj=8809953)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 0(2) -> Core 0
<7>CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 4032k freed
<6>ACPI: Core revision 20070126
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 1037 Objects with 90 Devices 263 Methods 44 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
<4> tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful
<4>CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 01
<6>SMP alternatives: switching to SMP code
<4>Booting processor 1/1 eip 3000
<6>Initializing CPU#1
<4>Calibrating delay using timer specific routine.. 4400.61 BogoMIPS (lpj=8801235)
<7>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 1(2) -> Core 1
<7>CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#1.
<4>CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 01
<6>Total of 2 processors activated (8805.59 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>Brought up 2 CPUs
<4>migration_cost=4000
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: Using MMCONFIG
<5>PCI: No mmconfig possible on device 00:18
<4>Setting up standard PCI resources
<4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
<4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 4 Runtime GPEs in this block
<4>Completing Region/Field/Buffer/Package initialization:..........................................................................................................................................................................
<4>Initialized 44/44 Regions 42/42 Fields 54/54 Buffers 30/46 Packages (1054 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:.
<4>Executed 1 _INI methods requiring 1 _STA executions (examined 97 objects)
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<6>PCI: Transparent bridge - 0000:00:08.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10
<4>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11)
<4>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled.
<4>ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
<4>ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *10
<4>ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
<4>ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
<4>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
<4>ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11
<4>ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7
<4>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
<4>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
<4>ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *0, disabled.
<4>ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5
<4>ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10
<4>ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11
<4>ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 13 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>ACPI: RTC can wake from S4
<6>pnp: 00:07: iomem range 0xe0000000-0xefffffff could not be reserved
<6>pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
<6>pnp: 00:0a: ioport range 0x1080-0x10ff has been reserved
<6>pnp: 00:0a: ioport range 0x1400-0x147f has been reserved
<6>pnp: 00:0a: ioport range 0x1480-0x14ff has been reserved
<6>pnp: 00:0a: ioport range 0x1800-0x187f has been reserved
<6>pnp: 00:0a: ioport range 0x1880-0x18ff has been reserved
<6>pnp: 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved
<6>pnp: 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
<6>pnp: 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
<6>pnp: 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved
<6>Time: hpet clocksource has been installed.
<6>PCI: Bridge: 0000:00:08.0
<6> IO window: disabled.
<6> MEM window: f0500000-f05fffff
<6> PREFETCH window: disabled.
<3>PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:02:00.0
<6>PCI: Bridge: 0000:00:0b.0
<6> IO window: 4000-4fff
<6> MEM window: cc000000-ceffffff
<6> PREFETCH window: d0000000-dfffffff
<6>PCI: Bridge: 0000:00:0c.0
<6> IO window: 5000-5fff
<6> MEM window: f0200000-f03fffff
<6> PREFETCH window: f0000000-f01fffff
<6>PCI: Bridge: 0000:00:0d.0
<6> IO window: disabled.
<6> MEM window: f0400000-f04fffff
<6> PREFETCH window: disabled.
<7>PCI: Setting latency timer of device 0000:00:08.0 to 64
<7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
<7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
<7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>Simple Boot Flag at 0x36 set to 0x1
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>audit(1191718631.552:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>Boot video device is 0000:02:00.0
<7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:0b.0:pcie00]
<7>Allocate Port Service[0000:00:0b.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:0c.0:pcie00]
<7>Allocate Port Service[0000:00:0c.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:0d.0:pcie00]
<7>Allocate Port Service[0000:00:0d.0:pcie03]
<6>vesafb: framebuffer at 0xcd000000, mapped to 0xf8880000, using 3750k, total 14336k
<6>vesafb: mode is 800x600x16, linelength=1600, pages=2
<6>vesafb: protected mode interface info at c000:b900
<6>vesafb: pmi: set display start = c00cb963, set palette = c00cb9be
<6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 78734 bytes
<6>bootsplash: ...found (800x600, 27773 bytes, v3).
<4>Console: switching to colour frame buffer device 96x33
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<7>hpet_resources: 0xfed00000 is busy
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<4>floppy0: no floppy controllers found
<6>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard as /class/input/input0
<6>input: PC Speaker as /class/input/input1
<6>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<6>Freeing unused kernel memory: 228k freed
<6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
<6>ACPI: Processor [CPU0] (supports 8 throttling states)
<4>ACPI Exception (processor_core-0787): AE_NOT_FOUND, Processor Device is not present [20070126]
<4>ACPI Exception (processor_core-0787): AE_NOT_FOUND, Processor Device is not present [20070126]
<4>ACPI Exception (thermal-0406): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
<6>ACPI: Thermal Zone [THRM] (33 C)
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>pata_amd 0000:00:06.0: version 0.3.8
<7>PCI: Setting latency timer of device 0000:00:06.0 to 64
<6>scsi0 : pata_amd
<6>scsi1 : pata_amd
<6>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000130c0 irq 14
<6>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000130c8 irq 15
<6>ata1.00: ATAPI: PIONEER DVD-RW DVR-K17RS, 1.02, max UDMA/33
<6>ata1.00: configured for UDMA/33
<7>ata2: port disabled. ignoring.
<5>scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17RS 1.02 PQ: 0 ANSI: 5
<7>ahci 0000:00:09.0: version 3.0
<4>ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
<6>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 16
<6>ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
<6>ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
<7>PCI: Setting latency timer of device 0000:00:09.0 to 64
<6>scsi2 : ahci
<6>scsi3 : ahci
<6>scsi4 : ahci
<6>scsi5 : ahci
<6>ata3: SATA max UDMA/133 cmd 0xf8828100 ctl 0x00000000 bmdma 0x00000000 irq 220
<6>ata4: SATA max UDMA/133 cmd 0xf8828180 ctl 0x00000000 bmdma 0x00000000 irq 220
<6>ata5: SATA max UDMA/133 cmd 0xf8828200 ctl 0x00000000 bmdma 0x00000000 irq 220
<6>ata6: SATA max UDMA/133 cmd 0xf8828280 ctl 0x00000000 bmdma 0x00000000 irq 220
<6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata3.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
<6>ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
<6>ata3.00: configured for UDMA/133
<6>ata4: SATA link down (SStatus 0 SControl 300)
<6>ata5: SATA link down (SStatus 0 SControl 300)
<6>ata6: SATA link down (SStatus 0 SControl 300)
<5>scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
<4>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
<6>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<6>ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
<6>ohci_hcd 0000:00:02.0: irq 17, io mem 0xf0886000
<5>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
<5>sd 2:0:0:0: [sda] Write Protect is off
<7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda:<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: OHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.22.5-31-default ohci_hcd
<6>usb usb1: SerialNumber: 0000:00:02.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 5 ports detected
<4> sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
<5>sd 2:0:0:0: [sda] Attached SCSI disk
<4>ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 21
<6>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z00N] -> GSI 21 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<6>ohci_hcd 0000:00:04.0: OHCI Host Controller
<6>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
<6>ohci_hcd 0000:00:04.0: irq 18, io mem 0xf0887000
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: OHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.22.5-31-default ohci_hcd
<6>usb usb2: SerialNumber: 0000:00:04.0
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 5 ports detected
<4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:02.1 to 64
<6>ehci_hcd 0000:00:02.1: EHCI Host Controller
<6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
<6>ehci_hcd 0000:00:02.1: debug port 1
<7>PCI: cache line size of 64 is not supported by device 0000:00:02.1
<6>ehci_hcd 0000:00:02.1: irq 19, io mem 0xf0889000
<6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: EHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
<6>usb usb3: SerialNumber: 0000:00:02.1
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 5 ports detected
<4>ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 23
<6>ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z00O] -> GSI 23 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:04.1 to 64
<6>ehci_hcd 0000:00:04.1: EHCI Host Controller
<6>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
<6>ehci_hcd 0000:00:04.1: debug port 1
<7>PCI: cache line size of 64 is not supported by device 0000:00:04.1
<6>ehci_hcd 0000:00:04.1: irq 16, io mem 0xf0889400
<6>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb4: new device found, idVendor=0000, idProduct=0000
<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: EHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
<6>usb usb4: SerialNumber: 0000:00:04.1
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 5 ports detected
<4>swsusp: Basic memory bitmaps created
<4>swsusp: Basic memory bitmaps freed
<4>Attempting manual resume
<6>usb 3-3: new high speed USB device using ehci_hcd and address 3
<6>usb 3-3: new device found, idVendor=064e, idProduct=a101
<6>usb 3-3: new device strings: Mfr=2, Product=1, SerialNumber=3
<6>usb 3-3: Product: Acer CrystalEye webcam
<6>usb 3-3: Manufacturer: SuYin
<6>usb 3-3: SerialNumber: CN0314-OV03-VA-R02.00.00
<6>usb 3-3: configuration #1 chosen from 1 choice
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda8, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>usb 1-2: new low speed USB device using ohci_hcd and address 3
<6>usb 1-2: new device found, idVendor=0458, idProduct=0007
<6>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 1-2: Product: USB MOUSE
<6>usb 1-2: Manufacturer: KYE
<6>usb 1-2: configuration #1 chosen from 1 choice
<5>scsi 0:0:0:0: Attached scsi generic sg0 type 5
<5>sd 2:0:0:0: Attached scsi generic sg1 type 0
<4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 0:0:0:0: Attached scsi CD-ROM sr0
<6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
<4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
<6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
<6>forcedeth: using HIGHDMA
<6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
<4>rtc_cmos: probe of 00:04 failed with error -16
<6>usbcore: registered new interface driver hiddev
<6>input: KYE USB MOUSE as /class/input/input3
<6>input: USB HID v1.10 Mouse [KYE USB MOUSE] on usb-0000:00:02.0-2
<6>usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<6>sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
<6>input: Power Button (FF) as /class/input/input4
<6>Linux video capture interface: v2.00
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Lid Switch as /class/input/input5
<6>ACPI: Lid Switch [LID]
<6>input: Sleep Button (CM) as /class/input/input6
<6>ACPI: Sleep Button (CM) [SLPB]
<6>input: Power Button (CM) as /class/input/input7
<6>ACPI: Power Button (CM) [PWRB]
<6>uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v0.1.0)
<6>ACPI: AC Adapter [ACAD] (on-line)
<6>ACPI: Battery Slot [BAT1] (battery present)
<6>eth0: forcedeth.c: subsystem: 01025:0126 bound to 0000:00:0a.0
<6>sdhci: SDHCI controller found at 0000:01:04.1 [1180:0822] (rev 22)
<4>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
<6>ACPI: PCI Interrupt 0000:01:04.1[B] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
<6>mmc0: SDHCI at 0xf0500800 irq 11 DMA
<4>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
<6>ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
<6>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:07.0 to 64
<6>hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
<7>ALSA sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2335: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2339: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2347: inputs: mic=0x19, fmic=0x18, line=0x0, fline=0x1a, cd=0x0, aux=0x0
<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f0500000-f05007ff] Max Packet=[2048] IR/IT contexts=[4/4]
<6>Adding 2112508k swap on /dev/sda6. Priority:-1 extents:1 across:2112508k
<6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f78ba40befb]
<6>loop: module loaded
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda9, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.8)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sun Oct 7 00:57:16 2007

Creating device nodes with udev
Trying manual resume from /dev/sda6
Invoking userspace resume from /dev/sda6
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.4
Trying manual resume from /dev/sda6
Invoking in-kernel resume from /dev/sda6
Waiting for device /dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 to appear: ok
fsck 1.40.2 (12-Jul-2007)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8
/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8: clean, 163950/2052000 files, 1023526/4096000 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8

Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Oct 7 02:57:22 2007

done
Starting udevd udevd-event[1891]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it

done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/sda8 is already mounted on /

Activating device mapper...
done
Checking file systems...
fsck 1.40.2 (12-Jul-2007)
/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part9: clean, 2191/3074176 files, 147413/6140838 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda9 on /home type ext3 (rw,acl,user_xattr)
$LogFile indicates unclean shutdown (0, 0)
Failed to mount '/dev/sda2': Die Operation wird nicht unterstützt
Mount is denied because NTFS is marked to be in use. Choose one action:

Choice 1: If you have Windows then disconnect the external devices by
clicking on the 'Safely Remove Hardware' icon in the Windows
taskbar then shutdown Windows cleanly.

Choice 2: If you don't have Windows then you can use the 'force' option for
your own responsibility. For example type on the command line:

mount -t ntfs-3g /dev/sda2 /windows/C -o force

Or add the option to the relevant row in the /etc/fstab file:

/dev/sda2 /windows/C ntfs-3g defaults,force 0 0
$LogFile indicates unclean shutdown (0, 0)
Failed to mount '/dev/sda3': Die Operation wird nicht unterstützt
Mount is denied because NTFS is marked to be in use. Choose one action:

Choice 1: If you have Windows then disconnect the external devices by
clicking on the 'Safely Remove Hardware' icon in the Windows
taskbar then shutdown Windows cleanly.

Choice 2: If you don't have Windows then you can use the 'force' option for
your own responsibility. For example type on the command line:

mount -t ntfs-3g /dev/sda3 /windows/D -o force

Or add the option to the relevant row in the /etc/fstab file:

/dev/sda3 /windows/D ntfs-3g defaults,force 0 0
failedConfiguring serial ports...
Configured serial ports
doneActivating remaining swap-devices in /etc/fstab...
done<notice>killproc: kill(1216,29)
Creating /var/log/boot.msg
doneMounting securityfs on /sys/kernel/security done
Loading AppArmor module done
Loading AppArmor profiles Setting up the hardware clockdone
done
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Setting up hostname 'linux-97f6'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
Checking for network time protocol daemon (NTPD): unused
Can't determine current runlevel
done
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(1216,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Sun Oct 7 00:57:32 2007

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>startproc: execve (/bin/dbus-daemon) [ --systemSOLE=/dev/console SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/bin/dbus-daemon ]
/bin/dbus-daemon ], [ CON ROOTFS_FSTYPE=ext3Starting D-Bus daemondone
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/sbin/acpid ]
<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PWD=/ PREVLEVEL=N LINES=33 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
Starting acpid done
Starting syslog services.Initializing random number generatordone
<notice>Starting ConsoleKitdone
startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PWD=/ PREVLEVEL=N LINES=33 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
done
Loading CPUFreq modulesdone
Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
<notice>startproc: execve (/usr/sbin/gdm) [ /usr/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=33 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=Industrial<notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 WINDOWMANAGER=/usr/bin/gnome SPLASH=yes SHELL=/bin/sh TERM=linux splash=silent ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ]
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/gdm ]
<notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
Starting service gdmdone
Starting the DHCP DBUS Daemondone
Starting the NetworkManagerDispatcherdone
Starting the NetworkManager<notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
done
Mount CIFS File Systems unused
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/sbin/auditd ]
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
<notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
Starting irqbalance done
Starting Name Service Cache Daemondone
Starting auditd done
Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
doneStarting Avahi daemon.done
Starting service gdmdone
<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
Starting Avahi DNS Configuration daemondone
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Starting hotkey-setup done
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
Starting SSH daemondone
Starting powersaved: done
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
Starting mail service (Postfix)done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=96 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-800x600.cfg PREVLEVEL=N LINES=33 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXE807G51043-part8 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
done
Starting Firewall Initialization (phase 2 of 2) done
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(2364,3)
Zuletzt geändert von linuxprobleme am 2. Jan 2008, 00:28, insgesamt 1-mal geändert.

linuxprobleme
Newbie
Newbie
Beiträge: 5
Registriert: 30. Dez 2007, 03:15

Und das andere (Messages):

Beitrag von linuxprobleme » 2. Jan 2008, 00:25

Und das andere (Messages):

Das was ich gefunden habe ist schier unendlich.
Da ich, wie ich es oben schon gesagt habe, die Uhrzeit und das Datum noch nicht geändert habe, weiß ich nicht genau, was ich posten soll.
Es sieht ungefähr so aus: Okt, Nov, Dec, Okt
Gehe ich dann richtig in der Annahme, das ich nur das Unterste (=letzte?)posten soll?

linuxprobleme
Newbie
Newbie
Beiträge: 5
Registriert: 30. Dez 2007, 03:15

Beitrag von linuxprobleme » 11. Jan 2008, 09:42

Habe ich was falsches gepostet oder warum antwortet mir niemand?!? Ich bin nämlich noch immer kein bisschen weiter und brauche eure Hilfe!

Grothesk
Ultimate Guru
Ultimate Guru
Beiträge: 14662
Registriert: 26. Okt 2003, 11:52
Wohnort: Köln

Beitrag von Grothesk » 11. Jan 2008, 09:47

Von den messages kannst du ja mal die letzen 200 Zeilen oder so posten.
Das ganze dann bitte in code-Tags oder nach http://phpfi.com setzen.
"Die Rechtschreibung ist Freeware, du darfst sie kostenlos nutzen. Allerdings ist sie nicht OpenSource, d.h. du sollst sie nicht verändern oder in veränderter Form veröffentlichen."

Antworten