schmiha
Newbie
Guten Abend,
nach einem Kernelupdate und Neustart des PC kommt folgende Grubmeldung:
Error 23.while parsing number.
Ich habe es versucht, über Knoppix Grub-Install via chroot zu machen. Hat leider nicht funktioniert.
Nachstehend fdisk -l
Platte /dev/sda: 163.9 GByte, 163928604672 Byte
255 Köpfe, 63 Sektoren/Spuren, 19929 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 19929 160079661 7 HPFS/NTFS
Platte /dev/sdb: 200.0 GByte, 200049647616 Byte
255 Köpfe, 63 Sektoren/Spuren, 24321 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 1 262 2104483+ 82 Linux Swap / Solaris
/dev/sdb2 * 263 2873 20972857+ 83 Linux
/dev/sdb3 2874 24321 172281060 83 Linux
cat/boot/grub/menu.lst
root@Knoppix:/media/sdb2# cat /media/sdb2/boot/grub/menu.lst
# Modified by YaST2. Last modification on Mon Dec 3 19:22:55 CET 2007
default 0
timeout 8
gfxmenu (hd2,1)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3 - 2.6.22.13-0.3
root (/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2,1)
kernel /boot/vmlinuz-2.6.22.13-0.3-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2 vga=0x317 resume=/dev/sdc1 splash=silent showopts
initrd /boot/initrd-2.6.22.13-0.3-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3 - 2.6.22.13-0.3
root (/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2,1)
kernel /boot/vmlinuz-2.6.22.13-0.3-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd-2.6.22.13-0.3-default
###Don't change this comment - YaST2 identifier: Original name: linux-2.6.22.12-2-default###
title openSUSE 10.3 - 2.6.22.12-2
root (hd2,1)
kernel /boot/vmlinuz-2.6.22.12-2-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2 vga=0x317 resume=/dev/sdc1 splash=silent showopts
initrd /boot/initrd-2.6.22.12-2-default
###Don't change this comment - YaST2 identifier: Original name: failsafe-2.6.22.12-2-default###
title Failsafe -- openSUSE 10.3 - 2.6.22.12-2
root (hd2,1)
kernel /boot/vmlinuz-2.6.22.12-2-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd-2.6.22.12-2-default
###Don't change this comment - YaST2 identifier: Original name: windows 1###
title windows 1
rootnoverify (hd2,1)
chainloader (hd0,1)+1
###Don't change this comment - YaST2 identifier: Original name: windows 2###
title windows 2
rootnoverify (hd2,1)
chainloader (hd0,0)+1
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Diskette
rootnoverify (hd2,1)
chainloader (fd0)+1
cat/boot/device.map
root@Knoppix:/media/sdb2# cat /media/sdb2/boot/grub/device.map
(fd0) /dev/fd0
(hd0) /dev/sda
(hd2) /dev/sdc
(hd1) /dev/sdb
cat/etc/fstab
root@Knoppix:/media/sdb2# cat /media/sdb2/etc/fstab
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2 / ext3 acl,user_xattr 1 1
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part3 /home ext3 acl,user_xattr 1 2
/dev/disk/by-id/scsi-SATA_Maxtor_6V200E0_V40431NG-part1 /windows/C vfat users,gid=users,umask=0002,utf8=true 0 0
/dev/disk/by-id/scsi-SATA_Maxtor_6V200E0_V40431NG-part2 /windows/D ntfs-3g users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/scsi-SATA_Maxtor_6L160M0_L40RK9EG-part1 /windows/E ntfs-3g users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part1 swap swap defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
/dev/fd0 /media/floppy auto noauto,user,sync 0 0
/dev/disk/by-id/scsi-SATA_WDC_WD2500JD-00WD-WCAL72507207-part5 /local ext3 acl,rw,user_xattr 1 2
Mit der DVD klappt dies leider nicht. Wenn ich Reparatur des installierten Systems verwende, startet der PC neu und ich bin wieder am Anfang, ebenso das Rettungssystem.
Ich bitte um Hilfe, um Linux wieder starten zu können.
Mit freundlichen Grüßen
Schmiha
nach einem Kernelupdate und Neustart des PC kommt folgende Grubmeldung:
Error 23.while parsing number.
Ich habe es versucht, über Knoppix Grub-Install via chroot zu machen. Hat leider nicht funktioniert.
Nachstehend fdisk -l
Platte /dev/sda: 163.9 GByte, 163928604672 Byte
255 Köpfe, 63 Sektoren/Spuren, 19929 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 19929 160079661 7 HPFS/NTFS
Platte /dev/sdb: 200.0 GByte, 200049647616 Byte
255 Köpfe, 63 Sektoren/Spuren, 24321 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 1 262 2104483+ 82 Linux Swap / Solaris
/dev/sdb2 * 263 2873 20972857+ 83 Linux
/dev/sdb3 2874 24321 172281060 83 Linux
cat/boot/grub/menu.lst
root@Knoppix:/media/sdb2# cat /media/sdb2/boot/grub/menu.lst
# Modified by YaST2. Last modification on Mon Dec 3 19:22:55 CET 2007
default 0
timeout 8
gfxmenu (hd2,1)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3 - 2.6.22.13-0.3
root (/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2,1)
kernel /boot/vmlinuz-2.6.22.13-0.3-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2 vga=0x317 resume=/dev/sdc1 splash=silent showopts
initrd /boot/initrd-2.6.22.13-0.3-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3 - 2.6.22.13-0.3
root (/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2,1)
kernel /boot/vmlinuz-2.6.22.13-0.3-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd-2.6.22.13-0.3-default
###Don't change this comment - YaST2 identifier: Original name: linux-2.6.22.12-2-default###
title openSUSE 10.3 - 2.6.22.12-2
root (hd2,1)
kernel /boot/vmlinuz-2.6.22.12-2-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2 vga=0x317 resume=/dev/sdc1 splash=silent showopts
initrd /boot/initrd-2.6.22.12-2-default
###Don't change this comment - YaST2 identifier: Original name: failsafe-2.6.22.12-2-default###
title Failsafe -- openSUSE 10.3 - 2.6.22.12-2
root (hd2,1)
kernel /boot/vmlinuz-2.6.22.12-2-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd-2.6.22.12-2-default
###Don't change this comment - YaST2 identifier: Original name: windows 1###
title windows 1
rootnoverify (hd2,1)
chainloader (hd0,1)+1
###Don't change this comment - YaST2 identifier: Original name: windows 2###
title windows 2
rootnoverify (hd2,1)
chainloader (hd0,0)+1
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Diskette
rootnoverify (hd2,1)
chainloader (fd0)+1
cat/boot/device.map
root@Knoppix:/media/sdb2# cat /media/sdb2/boot/grub/device.map
(fd0) /dev/fd0
(hd0) /dev/sda
(hd2) /dev/sdc
(hd1) /dev/sdb
cat/etc/fstab
root@Knoppix:/media/sdb2# cat /media/sdb2/etc/fstab
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part2 / ext3 acl,user_xattr 1 1
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part3 /home ext3 acl,user_xattr 1 2
/dev/disk/by-id/scsi-SATA_Maxtor_6V200E0_V40431NG-part1 /windows/C vfat users,gid=users,umask=0002,utf8=true 0 0
/dev/disk/by-id/scsi-SATA_Maxtor_6V200E0_V40431NG-part2 /windows/D ntfs-3g users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/scsi-SATA_Maxtor_6L160M0_L40RK9EG-part1 /windows/E ntfs-3g users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP2004CS07GJ1NL605233-part1 swap swap defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
/dev/fd0 /media/floppy auto noauto,user,sync 0 0
/dev/disk/by-id/scsi-SATA_WDC_WD2500JD-00WD-WCAL72507207-part5 /local ext3 acl,rw,user_xattr 1 2
Mit der DVD klappt dies leider nicht. Wenn ich Reparatur des installierten Systems verwende, startet der PC neu und ich bin wieder am Anfang, ebenso das Rettungssystem.
Ich bitte um Hilfe, um Linux wieder starten zu können.
Mit freundlichen Grüßen
Schmiha