Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

Ist mein Festplatte kaputt???

Alles rund um die Systemverwaltung, die Administration und Konfiguration Eures Linuxsystems

Moderator: Moderatoren

Antworten
Benutzeravatar
dragon48-
Newbie
Newbie
Beiträge: 36
Registriert: 12. Jun 2007, 13:25

Ist mein Festplatte kaputt???

Beitrag von dragon48- » 2. Dez 2007, 12:41

es sind ein Raid0 mit 2x80gb festplatten und 2x250gb festplatte (nicht raid) im mein pc eingebaut
beim boot bekomme ich immer diese meldung

Code: Alles auswählen

Nov 29 22:35:55 QUAD smartd[4266]: Device: /dev/sdc, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 253 to 252
Nov 29 22:35:55 QUAD smartd[4266]: Device: /dev/sdd, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 253 to 252
.
.
.
Nov 30 09:18:06 QUAD kernel: 1] sdc: rw=0, want=167782721, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.895864] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.895867] sdc: rw=0, want=167782722, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.895871] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.895874] sdc: rw=0, want=167782723, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.895877] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.895880] sdc: rw=0, want=167782724, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.895884] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.895891] sdc: rw=0, want=167782725, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.895897] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.895902] sdc: rw=0, want=167782726, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.895907] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.895912] sdc: rw=0, want=167782727, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936060] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936068] sdc: rw=0, want=167782856, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936074] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936079] sdc: rw=0, want=167782857, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936085] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936090] sdc: rw=0, want=167782858, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936096] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936101] sdc: rw=0, want=167782859, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936106] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936112] sdc: rw=0, want=167782860, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936118] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936124] sdc: rw=0, want=167782856, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936129] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936134] sdc: rw=0, want=167782857, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936140] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936145] sdc: rw=0, want=167782858, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936151] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936156] sdc: rw=0, want=167782859, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936161] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936167] sdc: rw=0, want=167782860, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936188] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936195] sdc: rw=0, want=167782856, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936200] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936206] sdc: rw=0, want=167782857, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936211] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936216] sdc: rw=0, want=167782858, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936222] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936227] sdc: rw=0, want=167782859, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936232] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936238] sdc: rw=0, want=167782860, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936249] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936254] sdc: rw=0, want=167782856, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936260] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936265] sdc: rw=0, want=167782857, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936271] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936276] sdc: rw=0, want=167782858, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936281] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936286] sdc: rw=0, want=167782859, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936292] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936297] sdc: rw=0, want=167782860, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936306] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936312] sdc: rw=0, want=167782856, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936318] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936323] sdc: rw=0, want=167782857, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936328] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936333] sdc: rw=0, want=167782858, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936339] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936344] sdc: rw=0, want=167782859, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936349] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936355] sdc: rw=0, want=167782860, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936365] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936370] sdc: rw=0, want=167782856, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936376] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936381] sdc: rw=0, want=167782857, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936387] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936392] sdc: rw=0, want=167782858, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936397] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936403] sdc: rw=0, want=167782859, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936408] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936413] sdc: rw=0, want=167782860, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936423] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936429] sdc: rw=0, want=167782856, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936434] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936439] sdc: rw=0, want=167782857, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936445] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936450] sdc: rw=0, want=167782858, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936455] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936461] sdc: rw=0, want=167782859, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936466] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936471] sdc: rw=0, want=167782860, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936484] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936490] sdc: rw=0, want=167782792, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936496] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936501] sdc: rw=0, want=167782793, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936506] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936512] sdc: rw=0, want=167782794, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936517] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936522] sdc: rw=0, want=167782795, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936528] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936533] sdc: rw=0, want=167782796, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936538] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936543] sdc: rw=0, want=167782797, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936549] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936554] sdc: rw=0, want=167782798, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936560] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936565] sdc: rw=0, want=167782799, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936577] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936582] sdc: rw=0, want=167782848, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936588] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936593] sdc: rw=0, want=167782849, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936598] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936604] sdc: rw=0, want=167782850, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936609] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936614] sdc: rw=0, want=167782851, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936620] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936625] sdc: rw=0, want=167782852, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936630] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936635] sdc: rw=0, want=167782853, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936641] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936646] sdc: rw=0, want=167782854, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936651] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936657] sdc: rw=0, want=167782855, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936667] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936673] sdc: rw=0, want=167782856, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936678] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936683] sdc: rw=0, want=167782857, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936689] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936694] sdc: rw=0, want=167782858, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936700] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936705] sdc: rw=0, want=167782859, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936710] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936715] sdc: rw=0, want=167782860, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936725] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936731] sdc: rw=0, want=167782856, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936737] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936742] sdc: rw=0, want=167782857, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936747] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936752] sdc: rw=0, want=167782858, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936758] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936763] sdc: rw=0, want=167782859, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.936768] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.936773] sdc: rw=0, want=167782860, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964319] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964329] sdc: rw=0, want=251674062, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964335] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964341] sdc: rw=0, want=251674064, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964346] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964352] sdc: rw=0, want=251674066, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964357] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964362] sdc: rw=0, want=251674068, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964369] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964374] sdc: rw=0, want=251674062, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964380] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964385] sdc: rw=0, want=251674064, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964391] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964396] sdc: rw=0, want=251674066, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964402] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964407] sdc: rw=0, want=251674068, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964418] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964424] sdc: rw=0, want=251674062, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964429] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964434] sdc: rw=0, want=251674064, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964440] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964445] sdc: rw=0, want=251674066, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964451] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964456] sdc: rw=0, want=251674068, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964474] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964481] sdc: rw=0, want=167782862, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964487] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964492] sdc: rw=0, want=167782864, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964498] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964503] sdc: rw=0, want=167782866, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964508] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964513] sdc: rw=0, want=167782868, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964520] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964525] sdc: rw=0, want=167782870, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964531] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964536] sdc: rw=0, want=167782872, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964541] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964546] sdc: rw=0, want=167782874, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964552] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964557] sdc: rw=0, want=167782876, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964563] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964569] sdc: rw=0, want=167782862, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964574] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964579] sdc: rw=0, want=167782864, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964585] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964590] sdc: rw=0, want=167782866, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964596] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964601] sdc: rw=0, want=167782868, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964611] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964616] sdc: rw=0, want=167782862, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964622] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964627] sdc: rw=0, want=167782864, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964632] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964638] sdc: rw=0, want=167782866, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964643] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964648] sdc: rw=0, want=167782868, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964662] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964668] sdc: rw=0, want=251674286, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964673] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964678] sdc: rw=0, want=251674288, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964684] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964689] sdc: rw=0, want=251674290, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964703] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964709] sdc: rw=0, want=251674286, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964715] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964720] sdc: rw=0, want=251674288, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964725] attempt to access beyond end of device
Nov 30 09:18:06 QUAD kernel: [   95.964730] sdc: rw=0, want=251674290, limit=160086528
Nov 30 09:18:06 QUAD kernel: [   95.964740] attempt to access beyond end of device
.
.


und "smartctl --all /dev/sdc "
liefert folgende Meldung

Code: Alles auswählen

12:22 QUAD:/home/dragon48 # smartctl --all /dev/sdc
smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Maxtor DiamondMax Plus 9 family
Device Model:     Maxtor 6Y080M0
Serial Number:    Y2CH5RGE
Firmware Version: YAR51HW0
User Capacity:    81.964.302.336 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Sun Dec  2 12:28:13 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 241) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  37) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   212   211   063    Pre-fail  Always       -       13561
  4 Start_Stop_Count        0x0032   253   253   000    Old_age   Always       -       79
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       0
  6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   252   239   187    Pre-fail  Always       -       60871
  9 Power_On_Minutes        0x0032   185   185   000    Old_age   Always       -       918h+57m
 10 Spin_Retry_Count        0x002b   250   249   157    Pre-fail  Always       -       3
 11 Calibration_Retry_Count 0x002b   253   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   253   253   000    Old_age   Always       -       80
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   253   253   000    Old_age   Always       -       26
195 Hardware_ECC_Recovered  0x000a   253   252   000    Old_age   Always       -       1848
196 Reallocated_Event_Count 0x0008   253   253   000    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0008   253   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0008   199   199   000    Old_age   Offline      -       0
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   202   000    Old_age   Always       -       16
202 TA_Increase_Count       0x000a   253   221   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       1
204 Shock_Count_Write_Opern 0x000a   253   252   000    Old_age   Always       -       0
205 Shock_Rate_Write_Opern  0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   250   249   000    Old_age   Always       -       3
208 Spin_Buzz               0x002a   253   252   000    Old_age   Always       -       0
209 Offline_Seek_Performnce 0x0024   196   196   000    Old_age   Offline      -       0
 99 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
100 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0
101 Unknown_Attribute       0x0004   253   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
Warning: ATA error count 59 inconsistent with error log pointer 5

ATA Error Count: 59 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 59 occurred at disk power-on lifetime: 22140 hours (922 days + 12 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 01 00 ba 8a e9  Error: IDNF at LBA = 0x098aba00 = 160086528

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 01 00 ba 8a e9 00      02:37:38.016  WRITE DMA
  ca 00 40 c0 b9 8a e9 00      02:37:38.000  WRITE DMA
  ca 00 40 80 b9 8a e9 00      02:37:38.000  WRITE DMA
  ca 00 40 40 b9 8a e9 00      02:37:38.000  WRITE DMA
  ca 00 40 00 b9 8a e9 00      02:37:38.000  WRITE DMA

Error 58 occurred at disk power-on lifetime: 22140 hours (922 days + 12 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 01 00 ba 8a e9  Error: IDNF at LBA = 0x098aba00 = 160086528

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 01 00 ba 8a e9 00      01:50:39.136  WRITE DMA
  ca 00 40 c0 b9 8a e9 00      01:50:39.136  WRITE DMA
  ca 00 40 80 b9 8a e9 00      01:50:39.136  WRITE DMA
  ca 00 40 40 b9 8a e9 00      01:50:39.136  WRITE DMA
  ca 00 40 00 b9 8a e9 00      01:50:39.136  WRITE DMA

Error 57 occurred at disk power-on lifetime: 22139 hours (922 days + 11 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 01 00 ba 8a e9  Error: IDNF at LBA = 0x098aba00 = 160086528

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 01 00 ba 8a e9 00      01:10:29.536  WRITE DMA
  ca 00 40 c0 b9 8a e9 00      01:10:29.536  WRITE DMA
  ca 00 40 80 b9 8a e9 00      01:10:29.536  WRITE DMA
  ca 00 40 40 b9 8a e9 00      01:10:29.536  WRITE DMA
  ca 00 40 00 b9 8a e9 00      01:10:29.536  WRITE DMA

Error 56 occurred at disk power-on lifetime: 22139 hours (922 days + 11 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 01 00 ba 8a e9  Error: IDNF at LBA = 0x098aba00 = 160086528

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ca 00 01 00 ba 8a e9 00      00:36:28.496  WRITE DMA
  ca 00 40 c0 b9 8a e9 00      00:36:28.496  WRITE DMA
  ca 00 40 80 b9 8a e9 00      00:36:28.496  WRITE DMA
  ca 00 40 40 b9 8a e9 00      00:36:28.496  WRITE DMA
  ca 00 40 00 b9 8a e9 00      00:36:28.496  WRITE DMA

Error 55 occurred at disk power-on lifetime: 21787 hours (907 days + 19 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 36 8f 90 67 e1  Error: UNC 54 sectors at LBA = 0x0167908f = 23564431

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 da 80 8f 90 67 e1 00  31d+14:12:15.664  READ DMA
  c8 da 80 0f 90 67 e1 00  31d+14:12:15.664  READ DMA
  c8 da 80 8f 8f 67 e1 00  31d+14:12:15.648  READ DMA
  c8 da 80 0f 8f 67 e1 00  31d+14:12:15.648  READ DMA
  c8 da 80 8f 8e 67 e1 00  31d+14:12:15.648  READ DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


sdc ist die eine von mein raid0 festplatte
ist die platte kaputt oder ????
:D:D:D:D:D:D:D:D:D:D:D:D

Werbung:
Benutzeravatar
whois
Administrator
Administrator
Beiträge: 16599
Registriert: 11. Okt 2004, 08:50
Wohnort: Aachen
Kontaktdaten:

Re: Ist mein Festplatte kaputt???

Beitrag von whois » 2. Dez 2007, 12:56

dragon48- hat geschrieben:ist die platte kaputt oder ????
Sieht fast so aus, lass mal ein Festplatten Test Tool drüber laufen, dann weisst du genau Bescheid.
Obwohl Smart in der Suse 10.3 Version auch Fehlermeldungen als Bug Produziert.

jengelh
Guru
Guru
Beiträge: 4039
Registriert: 20. Nov 2004, 17:42
Kontaktdaten:

Beitrag von jengelh » 2. Dez 2007, 17:03

Ich würde eher sagen du hast deine Partitionstabelle durcheinandergemurmelt. Zugriff bei Position 85 und 128 GB obwohl die Platte nur 81 GB groß ist.
Und nach den VALUE-THRESH-Spalten zufolge ist die auch noch fit.

Benutzeravatar
dragon48-
Newbie
Newbie
Beiträge: 36
Registriert: 12. Jun 2007, 13:25

Beitrag von dragon48- » 2. Dez 2007, 19:40

ist die auch noch fi

gut das meine platte noch in ordnung ist
Ich würde eher sagen du hast deine Partitionstabelle durcheinandergemurmelt
kann man die reparieren ???
:D:D:D:D:D:D:D:D:D:D:D:D

jengelh
Guru
Guru
Beiträge: 4039
Registriert: 20. Nov 2004, 17:42
Kontaktdaten:

Beitrag von jengelh » 2. Dez 2007, 20:33

Zeig die doch erstmal!

Benutzeravatar
dragon48-
Newbie
Newbie
Beiträge: 36
Registriert: 12. Jun 2007, 13:25

Beitrag von dragon48- » 2. Dez 2007, 22:05


22:02 QUAD:/home/dragon48 # fdisk -l

Platte /dev/sda: 251.0 GByte, 251000193024 Byte
255 heads, 63 sectors/track, 30515 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000a3372

Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 30515 245111706 83 Linux

Platte /dev/sdb: 251.0 GByte, 251000193024 Byte
255 heads, 63 sectors/track, 30515 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000cf89f

Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 * 1 30515 245111706 83 Linux

Platte /dev/sdc: 81.9 GByte, 81964302336 Byte
255 heads, 63 sectors/track, 9964 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x656c1866

Gerät boot. Anfang Ende Blöcke Id System
/dev/sdc1 * 1 6527 52428096 7 HPFS/NTFS
/dev/sdc2 6528 10444 31463302+ 83 Linux
/dev/sdc3 10445 15666 41945715 83 Linux
/dev/sdc4 15667 19929 34242547+ 83 Linux

Platte /dev/sdd: 81.9 GByte, 81964302336 Byte
255 heads, 63 sectors/track, 9964 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0006bd0c

Festplatte /dev/sdd enthält keine gültige Partitionstabelle

Platte /dev/dm-0: 163.9 GByte, 163923099648 Byte
255 heads, 63 sectors/track, 19929 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x656c1866

Gerät boot. Anfang Ende Blöcke Id System
/dev/dm-0p1 * 1 6527 52428096 7 HPFS/NTFS
/dev/dm-0p2 6528 10444 31463302+ 83 Linux
/dev/dm-0p3 10445 15666 41945715 83 Linux
/dev/dm-0p4 15667 19929 34242547+ 83 Linux

Platte /dev/dm-1: 53.6 GByte, 53686370304 Byte
255 heads, 63 sectors/track, 6526 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x444c544e

Das sieht nicht wie eine Partitionstabelle aus.
Sie haben wahrscheinlich das falsche Gerät ausgewählt.

Gerät boot. Anfang Ende Blöcke Id System
/dev/dm-1p1 ? 110102 110577 3815730+ 6b Unbekannt
Partition 1 endet nicht an einer Zylindergrenze.
/dev/dm-1p2 ? 113965 200777 697317940+ 75 PC/IX
Partition 2 endet nicht an einer Zylindergrenze.
/dev/dm-1p3 ? 106997 106998 1286+ 41 PPC PReP Boot
Partition 3 endet nicht an einer Zylindergrenze.
/dev/dm-1p4 175983 175986 26459 0 Leer
Partition 4 endet nicht an einer Zylindergrenze.

Partitionstabelleneinträge sind nicht in Platten-Reihenfolge

Platte /dev/dm-2: 32.2 GByte, 32218421760 Byte
255 heads, 63 sectors/track, 3917 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Festplatte /dev/dm-2 enthält keine gültige Partitionstabelle

Platte /dev/dm-3: 42.9 GByte, 42952412160 Byte
255 heads, 63 sectors/track, 5222 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Festplatte /dev/dm-3 enthält keine gültige Partitionstabelle

Platte /dev/dm-4: 35.0 GByte, 35064368640 Byte
255 heads, 63 sectors/track, 4263 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Festplatte /dev/dm-4 enthält keine gültige Partitionstabelle
:D:D:D:D:D:D:D:D:D:D:D:D

jengelh
Guru
Guru
Beiträge: 4039
Registriert: 20. Nov 2004, 17:42
Kontaktdaten:

Beitrag von jengelh » 4. Dez 2007, 00:06

Aha, ok, RAID0, ich les es oben. Dann finde jetzt eben raus, wer/was da wieso sdc statt dm-X verwendet. /etc/fstab, sonstige?

Benutzeravatar
dragon48-
Newbie
Newbie
Beiträge: 36
Registriert: 12. Jun 2007, 13:25

Beitrag von dragon48- » 4. Dez 2007, 08:52

Code: Alles auswählen

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
######################################################################################################################


/dev/dm-1	/media/windows	ntfs-3g	users,gid=users,umask=0002,nls=utf8	0	0
/dev/dm-2	/	ext3	acl,user_xattr	1	1
/dev/dm-3	/media/data1	ext3	defaults	1	2
/dev/disk/by-id/scsi-SATA_Maxtor_7Y250M0_Y6487JHE-part1 /media/data2         ext3       acl,user_xattr        1 2
/dev/disk/by-id/scsi-SATA_Maxtor_7Y250M0_Y656ZE2E-part1 /media/data3         ext3       acl,user_xattr        1 2

debugfs	/sys/kernel/debug	debugfs	noauto	0	0
/dev/fd0	/media/floppy	auto	noauto,user,sync	0	0
none	/proc/bus/usb	usbfs	devgid=85,devmode=666	0	0
proc	/proc	proc	defaults	0	0
sysfs	/sys	sysfs	noauto	0	0
usbfs	/proc/bus/usb	usbfs	noauto	0	0
devpts	/dev/pts	devpts	mode=0620,gid=5	0	0

Code: Alles auswählen

08:19 QUAD:~ > ls /dev/d
device-mapper  dm-0           dm-2           dm-4           dvd2           dvdrw2
disk/          dm-1           dm-3           dsp            dvd3

Code: Alles auswählen

08:19 QUAD:~ > ls /dev/mapper/
control                    isw_jciecjjdh_RAID0_part1  isw_jciecjjdh_RAID0_part3
isw_jciecjjdh_RAID0        isw_jciecjjdh_RAID0_part2  isw_jciecjjdh_RAID0_part4

Code: Alles auswählen

# Modified by YaST2. Last modification on Di Nov 13 20:45:50 CET 2007
default 0
timeout 15
gfxmenu (hd0,1)/boot/grub/splash/message.tux

#-------------------------------------------------------------------------------------------------------------------------------------
title OpenSUSE 10.3
    root (hd0,1)
    kernel /boot/vmlinuz root=/dev/mapper/isw_jciecjjdh_RAID0_part2 vga=0x31a splash=verbose showopts
    initrd /boot/initrd

#-------------------------------------------------------------------------------------------------------------------------------------
title Windows XP
    rootnoverify (hd0,1)
    chainloader (hd0,0)+1
#-------------------------------------------------------------------------------------------------------------------------------------
title OpenSUSE 10.3 (Failsafe)
    root (hd0,1)
    kernel /boot/vmlinuz root=/dev/mapper/isw_jciecjjdh_RAID0_part2 showopts ide=nodma apm=off acpi=off noresume edd=off 3
    initrd /boot/initrd
wenn ich yast--->partitionieren starte bekomme folgende Meldung
Bild

Bild
:D:D:D:D:D:D:D:D:D:D:D:D

jengelh
Guru
Guru
Beiträge: 4039
Registriert: 20. Nov 2004, 17:42
Kontaktdaten:

Beitrag von jengelh » 4. Dez 2007, 10:04

Ist sdc-sdd auch ein raid0? Dafür fehlt doch ein DM-Device...

Benutzeravatar
dragon48-
Newbie
Newbie
Beiträge: 36
Registriert: 12. Jun 2007, 13:25

Beitrag von dragon48- » 4. Dez 2007, 10:50

so sind meine festplatten:

ich habe 6 sata anschlüsse im mainboard kontrolle und so sind die Festplatten angeschlossen:

Sata1:80GB
Sata2:80GB
beide 80gb festplatte sind als raid0 im bios eingestellt
sata3:250GB
sata4:250GB
die beide 250gb sind normal kein raid
sata5: DVDRW
sata6:DVDROM

sdc-sdd sind die beide 80gb festplatten und sind als raid0 eingestellt aber trotzdem erscheinen als non raid auch :shock:
normalerweise mussen die sdc und sdd nicht erscheinen als sdcx sonder nur als dm-x oder? :shock:
:D:D:D:D:D:D:D:D:D:D:D:D

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast