Hallo!
Ich habe auf meinem Rechner opensuse 10.3 neu installiert. Unter suse 10.0 ist das System immer innerhalb kurzer Zeit problemlos hochgefahren. Jetzt unter 10.3 dauert es ca. 15 Min. bis KDE startet. An der Hardware habe ich nichts verändert.
Leider habe ich keine Ahnung, wo der Fehler liegt.
Hier ein Ausschnitt aus dem startprotokoll:
[/code]
<5>scsi 0:0:0:0: Direct-Access ATA Maxtor 34098H4 YAH8 PQ: 0 ANSI: 5
<3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
<3>ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 96 in
<4> res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
<6>ata1: soft resetting link
<4>ata1.01: failed to IDENTIFY (I/O error, err_mask=0x2)
<3>ata1.01: revalidation failed (errno=-5)
<4>ata1: failed to recover some devices, retrying in 5 secs
<4>ata1: port is slow to respond, please be patient (Status 0xd0)
<4>ata1: device not ready (errno=-16), forcing hardreset
<6>ata1: soft resetting link
<4>ata1.01: failed to IDENTIFY (I/O error, err_mask=0x2)
<3>ata1.01: revalidation failed (errno=-5)
<4>ata1.01: limiting speed to UDMA/33IO3
<4>ata1: failed to recover some devices, retrying in 5 secs
<4>ata1: port is slow to respond, please be patient (Status 0xd0)
<4>ata1: device not ready (errno=-16), forcing hardreset
<6>ata1: soft resetting link
<4>ata1.01: failed to IDENTIFY (I/O error, err_mask=0x2)
<3>ata1.01: revalidation failed (errno=-5)
<4>ata1.01: disabled
<4>ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
<3>ata1.00: revalidation failed (errno=-5)
<4>ata1: failed to recover some devices, retrying in 5 secs
<6>ata1: soft resetting link
<4>ata1.00: limited to UDMA/33 due to 40-wire cable
<6>ata1.00: configured for UDMA/33
<6>ata1: EH pending after completion, repeating EH (cnt=4)
<6>ata1: EH complete
<6>scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 96 in
<4> res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
<4>ata2: port is slow to respond, please be patient (Status 0xd0)
<4>ata2: device not ready (errno=-16), forcing hardreset
<6>ata2: soft resetting link
Ich bin für jede Hilfe dankbar![/quote]
Ich habe auf meinem Rechner opensuse 10.3 neu installiert. Unter suse 10.0 ist das System immer innerhalb kurzer Zeit problemlos hochgefahren. Jetzt unter 10.3 dauert es ca. 15 Min. bis KDE startet. An der Hardware habe ich nichts verändert.
Leider habe ich keine Ahnung, wo der Fehler liegt.
Hier ein Ausschnitt aus dem startprotokoll:
[/code]
<5>scsi 0:0:0:0: Direct-Access ATA Maxtor 34098H4 YAH8 PQ: 0 ANSI: 5
<3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
<3>ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 96 in
<4> res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
<6>ata1: soft resetting link
<4>ata1.01: failed to IDENTIFY (I/O error, err_mask=0x2)
<3>ata1.01: revalidation failed (errno=-5)
<4>ata1: failed to recover some devices, retrying in 5 secs
<4>ata1: port is slow to respond, please be patient (Status 0xd0)
<4>ata1: device not ready (errno=-16), forcing hardreset
<6>ata1: soft resetting link
<4>ata1.01: failed to IDENTIFY (I/O error, err_mask=0x2)
<3>ata1.01: revalidation failed (errno=-5)
<4>ata1.01: limiting speed to UDMA/33IO3
<4>ata1: failed to recover some devices, retrying in 5 secs
<4>ata1: port is slow to respond, please be patient (Status 0xd0)
<4>ata1: device not ready (errno=-16), forcing hardreset
<6>ata1: soft resetting link
<4>ata1.01: failed to IDENTIFY (I/O error, err_mask=0x2)
<3>ata1.01: revalidation failed (errno=-5)
<4>ata1.01: disabled
<4>ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
<3>ata1.00: revalidation failed (errno=-5)
<4>ata1: failed to recover some devices, retrying in 5 secs
<6>ata1: soft resetting link
<4>ata1.00: limited to UDMA/33 due to 40-wire cable
<6>ata1.00: configured for UDMA/33
<6>ata1: EH pending after completion, repeating EH (cnt=4)
<6>ata1: EH complete
<6>scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 96 in
<4> res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
<4>ata2: port is slow to respond, please be patient (Status 0xd0)
<4>ata2: device not ready (errno=-16), forcing hardreset
<6>ata2: soft resetting link
Ich bin für jede Hilfe dankbar![/quote]