Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

X.Org Treiber für VIA (CLE266)

Alles rund um die Systemverwaltung, die Administration und Konfiguration Eures Linuxsystems

Moderator: Moderatoren

Antworten
gutenberg
Newbie
Newbie
Beiträge: 2
Registriert: 29. Sep 2006, 09:00

X.Org Treiber für VIA (CLE266)

Beitrag von gutenberg » 29. Sep 2006, 09:35

Hallo,

beim Versuch, einen ThinClient mit dem VIA CLE266 Chip unter LTSP 4.2 zu starten, bekomme ich folgende Meldung beim starten von X:

Code: Alles auswählen

...
(EE) Failed to load module "via" (module requirement mismatch, 0)
(EE) No drivers available

Fatal server error:
no screens found
...was besagt, daß er die Grafikkarte als "via" erkannt hat, denn in der lts.conf steht folgendes:

/opt/ltsp/i386/etc/lts.conf

Code: Alles auswählen

[ws199]
        XSERVER                 = auto
        X_HORZSYNC              = 30-80
        X_VERTREFRESH           = 50-80
        SCREEN_01               = shell
Wo bekomme ich einen Passenden Treiber für den X-Server her? Durch Googeln weiß ich, daß es sich um das Modul "via_drv.o" in "/opt/ltsp/i386/usr/X11R6/lib/modules/drivers/" handeln muß. Bisher habe ich aber keine passende Version gefunden.
Wenn ich in der lts.conf bei "XSERVER" statt "auto" "vesa" einstelle, funktioniert es - ist aber sehr langsam.
Auf der Seite von "unichrome" (http://unichrome.sourceforge.net/) habe ich mir das Paket "xf86-video-unichrome-0.2.6.tar.gz" heruntergeladen... jedoch ohne Erfolg!

Hat jemand schon Erfahrungen mit CLE266 mit LTSP gemacht? Wie kompeliere ich das VIA Modul für meine X.Org Version von LTSP?

Facts:

Code: Alles auswählen

Current Operating System: Linux ws199 2.6.9-ltsp-3 #1 Thu Apr 19 04:19:09 UTC 2006 i686
Build Date: 19 April 2005

Code: Alles auswählen

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operation System: Linux 2.6.8-1686-smp i686 [ELF]
Danke!

Werbung:
rolle
Guru
Guru
Beiträge: 3724
Registriert: 4. Mai 2004, 21:50
Kontaktdaten:

Beitrag von rolle » 29. Sep 2006, 13:07

Versuche es mal explizit mit 'XSERVER = via'. In /opt/ltsp-4.2/i386/usr/X11R6/lib/modules/drivers ist 'via_drv.o' enthalten (LTSP 4.2 Update 4).
Horrido, Roland

Für meine Postings gilt außer bei Zitaten hier im Linux-Club die Creative Commons.

gutenberg
Newbie
Newbie
Beiträge: 2
Registriert: 29. Sep 2006, 09:00

Beitrag von gutenberg » 4. Okt 2006, 13:25

Danke für die schnelle Antwort.
rolle hat geschrieben:Versuche es mal explizit mit 'XSERVER = via'. In /opt/ltsp-4.2/i386/usr/X11R6/lib/modules/drivers ist 'via_drv.o' enthalten (LTSP 4.2 Update 4).
Ich habe diese Version installiert und eingerichtet. Der Thin Client startet einwandfrei und findet auch den via Treiber. Anmeldebildschirm erscheint und ich kann mich anmelden.
Jedoch gibt es im oberen Teil des Desktops ein Art Grafikfehler, wenn ich ein Fenster (z.B. Terminal) mit der Maus verschiebe. Und wenn ich das Fenster mit der Maus zu diesem besagten "Grafikfehler" ziehe so ändert sich der Mauszeiger in eine Art Quadrat. Würde fast sagen, er sieht aus wie ein Barcode, der sich ständig ändert, wenn die Maus bewegt wird. Kann man jetzt schlecht beschreiben...

ScreenShot http://mail.mundschenk.de/screen.png

Auch die erhoffte schnelle Geschwindigkeit gegenüber dem VESA Treiber bleibt aus. Auch, nachdem ich "DRI" Support eingeschaltet hatte.

hier die Ausgabe vom Xorg:

Code: Alles auswählen

X Window System Version 6.9.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: Linux 2.6.15-19-686 i686 [ELF] 
Current Operating System: Linux ws199 2.6.17.8-ltsp-1 #0 PREEMPT Fri Aug 11 13:49:25 EDT 2006 i686
Build Date: 03 April 2006
        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/tmp/mnt/xorg.log", Time: Wed Oct  4 18:25:17 2006
(++) Using config file: "/tmp/XF86Config.1"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen00" (0)
(**) |   |-->Monitor "Monitor00"
(**) |   |-->Device "Card00"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Mouse1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Open ACPI successful (/proc/acpi/event)
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.2
        X.Org Video Driver: 0.8
        X.Org XInput driver : 0.5
        X.Org Server Extension : 0.2
        X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
(++) using VT number 1

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3123 card 1106,3123 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,3177 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1106,4161 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1106,3122 card 1106,3122 rev 03 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
        [0] -1  0       0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
        [0] -1  0       0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x3122) rev 3, Mem @ 0xe4000000/26, 0xe8000000/24
(II) Addressable bus resource ranges are
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1  0       0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
        [0] -1  0       0xea001000 - 0xea0010ff (0x100) MX[B]
        [1] -1  0       0xea000000 - 0xea0000ff (0x100) MX[B]
        [2] -1  0       0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [3] -1  0       0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [4] -1  0       0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
        [5] -1  0       0x0000e800 - 0x0000e8ff (0x100) IX[B]
        [6] -1  0       0x0000e400 - 0x0000e40f (0x10) IX[B]
        [7] -1  0       0x0000e000 - 0x0000e01f (0x20) IX[B]
        [8] -1  0       0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [9] -1  0       0x0000d800 - 0x0000d81f (0x20) IX[B]
        [10] -1 0       0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0       0xea001000 - 0xea0010ff (0x100) MX[B]
        [1] -1  0       0xea000000 - 0xea0000ff (0x100) MX[B]
        [2] -1  0       0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [3] -1  0       0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [4] -1  0       0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
        [5] -1  0       0x0000e800 - 0x0000e8ff (0x100) IX[B]
        [6] -1  0       0x0000e400 - 0x0000e40f (0x10) IX[B]
        [7] -1  0       0x0000e000 - 0x0000e01f (0x20) IX[B]
        [8] -1  0       0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [9] -1  0       0x0000d800 - 0x0000d81f (0x20) IX[B]
        [10] -1 0       0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0       0xea001000 - 0xea0010ff (0x100) MX[B]
        [6] -1  0       0xea000000 - 0xea0000ff (0x100) MX[B]
        [7] -1  0       0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [8] -1  0       0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [9] -1  0       0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
        [10] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [11] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [12] -1 0       0x0000e800 - 0x0000e8ff (0x100) IX[B]
        [13] -1 0       0x0000e400 - 0x0000e40f (0x10) IX[B]
        [14] -1 0       0x0000e000 - 0x0000e01f (0x20) IX[B]
        [15] -1 0       0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [16] -1 0       0x0000d800 - 0x0000d81f (0x20) IX[B]
        [17] -1 0       0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Reloading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.2
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 0.0.1
        ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.so
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.2.0
        ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.1.0
        ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 6.9.0, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Reloading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "via"
(II) Loading /usr/X11R6/lib/modules/drivers/via_drv.so
(II) Module via: vendor="X.Org Foundation"
        compiled for 4.3.99.902, module version = 0.1.33
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.3
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 0.5
(II) v4l driver for Video4Linux
(II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
        PM800/PM880/CN400
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset CLE266 found
(!!) VIA Technologies does not support or endorse this driver in any way.
(!!) For support please contact the driver maintainer or your X vendor.
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0       0xea001000 - 0xea0010ff (0x100) MX[B]
        [6] -1  0       0xea000000 - 0xea0000ff (0x100) MX[B]
        [7] -1  0       0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [8] -1  0       0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [9] -1  0       0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
        [10] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [11] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [12] -1 0       0x0000e800 - 0x0000e8ff (0x100) IX[B]
        [13] -1 0       0x0000e400 - 0x0000e40f (0x10) IX[B]
        [14] -1 0       0x0000e000 - 0x0000e01f (0x20) IX[B]
        [15] -1 0       0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [16] -1 0       0x0000d800 - 0x0000d81f (0x20) IX[B]
        [17] -1 0       0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) resource ranges after probing:
        [0] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0       0xea001000 - 0xea0010ff (0x100) MX[B]
        [6] -1  0       0xea000000 - 0xea0000ff (0x100) MX[B]
        [7] -1  0       0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [8] -1  0       0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [9] -1  0       0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
        [10] 0  0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [11] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [12] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [13] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [14] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [15] -1 0       0x0000e800 - 0x0000e8ff (0x100) IX[B]
        [16] -1 0       0x0000e400 - 0x0000e40f (0x10) IX[B]
        [17] -1 0       0x0000e000 - 0x0000e01f (0x20) IX[B]
        [18] -1 0       0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [19] -1 0       0x0000d800 - 0x0000d81f (0x20) IX[B]
        [20] -1 0       0x0000d000 - 0x0000d0ff (0x100) IX[B]
        [21] 0  0       0xe90003b0 - 0xe90003bb (0xc) IS[B]
        [22] 0  0       0xe90003c0 - 0xe90003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 0.1.0
        ABI class: X.Org Video Driver, version 0.8
(**) VIA(0): Depth 24, (--) framebuffer bpp 32
(==) VIA(0): RGB weight 888
(==) VIA(0): Default visual is TrueColor
(**) VIA(0): Option "DisableIRQ"
(**) VIA(0): Option "EnableAGPDMA"
(==) VIA(0): Using HW cursor
(**) VIA(0): Option: DisableIRQ - DRI IRQ Disabled
(**) VIA(0): Option: EnableAGPDMA - Enabling AGP DMA
(--) VIA(0): Chipset: "CLE266"
(--) VIA(0): mapping MMIO @ 0xe8000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xe8200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) VIA(0): Chipset Rev.: 18
(WW) VIA(0): Manufacturer plainly copied main PCI ids to Subsystem/Card ids.
(--) VIA(0): Detected VIA EPIA M/MII/....
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram =  33280k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/X11R6/lib/modules/libi2c.so
(II) VIA(0): I2C bus "I2C bus 1" initialized.
(II) VIA(0): I2C bus "I2C bus 2" initialized.
(II) VIA(0): I2C bus "I2C bus 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 0.8
(II) VIA(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) VIA(0): I2C device "I2C bus 1:ddc2" removed.
(II) VIA(0): Manufacturer: TEO  Model: 6770  Serial#: 7311
(II) VIA(0): Year: 2005  Week: 37
(II) VIA(0): EDID Version: 1.3
(II) VIA(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) VIA(0): Sync:  Separate  CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) VIA(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) VIA(0): Gamma: 2.20
(II) VIA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VIA(0): First detailed timing is preferred mode
(II) VIA(0): redX: 0.652 redY: 0.333   greenX: 0.277 greenY: 0.629
(II) VIA(0): blueX: 0.141 blueY: 0.054   whiteX: 0.310 whiteY: 0.330
(II) VIA(0): Supported VESA Video Modes:
(II) VIA(0): 720x400@70Hz
(II) VIA(0): 640x480@60Hz
(II) VIA(0): 640x480@67Hz
(II) VIA(0): 640x480@72Hz
(II) VIA(0): 640x480@75Hz
(II) VIA(0): 800x600@56Hz
(II) VIA(0): 800x600@60Hz
(II) VIA(0): 800x600@72Hz
(II) VIA(0): 800x600@75Hz
(II) VIA(0): 832x624@75Hz
(II) VIA(0): 1024x768@60Hz
(II) VIA(0): 1024x768@70Hz
(II) VIA(0): 1024x768@75Hz
(II) VIA(0): 1280x1024@75Hz
(II) VIA(0): Manufacturer's mask: 0
(II) VIA(0): Supported Future Video Modes:
(II) VIA(0): #0: hsize: 1152  vsize 864  refresh: 60  vid: 16497
(II) VIA(0): #1: hsize: 1152  vsize 864  refresh: 70  vid: 19057
(II) VIA(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) VIA(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) VIA(0): #4: hsize: 1280  vsize 960  refresh: 70  vid: 19073
(II) VIA(0): #5: hsize: 1280  vsize 960  refresh: 75  vid: 20353
(II) VIA(0): #6: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) VIA(0): Supported additional Video Mode:
(II) VIA(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) VIA(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) VIA(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) VIA(0): Ranges: V min: 49  V max: 75 Hz, H min: 24  H max: 80 kHz, PixClock max 140 MHz
(II) VIA(0): Monitor name: TECO TL766
(II) VIA(0): Serial No: R95CP07311
(WW) VIA(0): This device is supposed to have a TV encoder but we are unable to detect it (support missing?).
(WW) VIA(0): config file hsync range 30-90kHz not within DDC hsync ranges.
(WW) VIA(0): config file vrefresh range 30-110Hz not within DDC vrefresh ranges.
(II) VIA(0): Monitor00: Using hsync range of 30.00-90.00 kHz
(II) VIA(0): Monitor00: Using vrefresh range of 30.00-110.00 Hz
(II) VIA(0): Clock range:  20.00 to 230.00 MHz
(II) VIA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (interlace mode not supported)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x960,Monitor00) mode clock 148.5MHz exceeds DDC maximum 140MHz
(II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Monitor00) mode clock 157.5MHz exceeds DDC maximum 140MHz
(II) VIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Monitor00) mode clock 162MHz exceeds DDC maximum 140MHz
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Monitor00) mode clock 175.5MHz exceeds DDC maximum 140MHz
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Monitor00) mode clock 189MHz exceeds DDC maximum 140MHz
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Monitor00) mode clock 202.5MHz exceeds DDC maximum 140MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Monitor00) mode clock 229.5MHz exceeds DDC maximum 140MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1792x1344,Monitor00) mode clock 204.8MHz exceeds DDC maximum 140MHz
(II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(WW) (1856x1392,Monitor00) mode clock 218.3MHz exceeds DDC maximum 140MHz
(II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): CrtcHSyncEnd out of range.
(II) VIA(0): Not using default mode "1400x1050" (horizontal sync too wide)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1600x1024" (no clock available for mode)
(II) VIA(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) VIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) VIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) VIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) VIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) VIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) VIA(0): Virtual size is 1280x1024 (pitch 1280)
(**) VIA(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) VIA(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) VIA(0): *Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) VIA(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) VIA(0): *Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) VIA(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) VIA(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) VIA(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) VIA(0):  Default mode "1280x960": 148.5 MHz (scaled from 0.0 MHz), 85.9 kHz, 85.0 Hz
(II) VIA(0): Modeline "1280x960"  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync
(**) VIA(0):  Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) VIA(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) VIA(0):  Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) VIA(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
(**) VIA(0):  Default mode "1152x768": 65.0 MHz (scaled from 0.0 MHz), 44.2 kHz, 54.8 Hz
(II) VIA(0): Modeline "1152x768"   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync
(**) VIA(0):  Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) VIA(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) VIA(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) VIA(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) VIA(0):  Default mode "1024x768": 65.0 MHz (scaled from -0.0 MHz), 48.4 kHz, 60.0 Hz
(II) VIA(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) VIA(0):  Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) VIA(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) VIA(0):  Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) VIA(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) VIA(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) VIA(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) VIA(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) VIA(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) VIA(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) VIA(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) VIA(0):  Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) VIA(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) VIA(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) VIA(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) VIA(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) VIA(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) VIA(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) VIA(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) VIA(0):  Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.0 Hz
(II) VIA(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) VIA(0):  Default mode "640x400": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
(II) VIA(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) VIA(0):  Default mode "640x350": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
(II) VIA(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(--) VIA(0): Display dimensions: (340, 270) mm
(--) VIA(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 1.2.0
        ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 0.1.0
        ABI class: X.Org Video Driver, version 0.8
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0   0       0xe8000000 - 0xe8ffffff (0x1000000) MS[B]
        [1] 0   0       0xe4000000 - 0xe7ffffff (0x4000000) MS[B]
        [2] -1  0       0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [3] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [4] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [5] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [6] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [7] -1  0       0xea001000 - 0xea0010ff (0x100) MX[B]
        [8] -1  0       0xea000000 - 0xea0000ff (0x100) MX[B]
        [9] -1  0       0xe0000000 - 0xdfffffff (0x0) MX[B]O
        [10] -1 0       0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
        [11] -1 0       0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
        [12] 0  0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [13] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [14] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [15] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [16] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [17] -1 0       0x0000e800 - 0x0000e8ff (0x100) IX[B]
        [18] -1 0       0x0000e400 - 0x0000e40f (0x10) IX[B]
        [19] -1 0       0x0000e000 - 0x0000e01f (0x20) IX[B]
        [20] -1 0       0x0000dc00 - 0x0000dc1f (0x20) IX[B]
        [21] -1 0       0x0000d800 - 0x0000d81f (0x20) IX[B]
        [22] -1 0       0x0000d000 - 0x0000d0ff (0x100) IX[B]
        [23] 0  0       0xe90003b0 - 0xe90003bb (0xc) IS[B]
        [24] 0  0       0xe90003c0 - 0xe90003df (0x20) IS[B]
(--) VIA(0): mapping framebuffer @ 0xe4000000 with size 0x2080000
(II) VIA(0): Splitting WC range: base: 0xe4000000, size: 0x2080000
(==) VIA(0): Write-combining range (0xe6000000,0x80000)
(==) VIA(0): Write-combining range (0xe4000000,0x2080000)
(--) VIA(0): Frame buffer start: 0xb58c5000, free start: 0x500000 end: 0x2080000
(--) VIA(0): mapping MMIO @ 0xe8000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xe8200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) VIA(0): 3D Engine has been initialized.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) VIA(0): [drm] DRM interface version 1.2
(II) VIA(0): [drm] created "via" driver at busid "PCI:1:0:0"
(II) VIA(0): [drm] added 8192 byte SAREA at 0xc68db000
(II) VIA(0): [drm] mapped SAREA 0xc68db000 to 0xb58c3000
(II) VIA(0): [drm] framebuffer handle = 0xe4000000
(II) VIA(0): [drm] added 1 reserved context for kernel
(II) VIA(0): [dri] visual configs initialized.
(II) VIA(0): [drm] register handle = 0xe8000000
(II) VIA(0): [drm] mmio Registers = 0xe8000000
(II) VIA(0): [dri] mmio mapped.
(II) VIA(0): VIAInternalScreenInit
(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        8x8 color pattern filled rectangles
        Solid Lines
        Dashed Lines
        Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                9 256x256 slots
                32 8x8 color pattern slots
(==) VIA(0): Backing store disabled
(II) VIA(0): [drm] Detected AGP vendor 0x1106, device 0x3123
(II) VIA(0): [drm] Didn't find any AGP v3 compatible device. Trying AGP 4X mode.
(II) VIA(0): [drm] Trying to enable AGP fast writes.
(II) VIA(0): [drm] drmAgpEnabled succeeded
(II) VIA(0): [drm] agpAddr = 0xe0000000
(II) VIA(0): [drm] agpBase = (nil)
(II) VIA(0): [drm] agpAddr = 0xe0000000
(II) VIA(0): [drm] agpSize = 0x01e00000
(II) VIA(0): [drm] agp physical addr = 0x00000000
(II) VIA(0): [dri] use agp.
(II) VIA(0): [drm] FBFreeStart= 0x00a00000 FBFreeEnd= 0x0203f000 FBSize= 0x0163f000
(II) VIA(0): [dri] frame buffer initialized.
(II) VIA(0): X context handle = 0x1
(II) VIA(0): [drm] installed DRM signal handler
(II) VIA(0): [DRI] installation complete
(II) VIA(0): [dri] kernel data initialized.
(II) VIA(0): [drm] Initialized AGP ring-buffer, size 0x200000 at AGP offset 0x1e00000.
(II) VIA(0): direct rendering enabled
(II) VIA(0): Benchmarking video copy. Less is better.
(--) VIA(0): Timed   libc YUV420 copy... 5750411. Throughput: 54.8 MiB/s.
(--) VIA(0): Timed kernel YUV420 copy... 5658068. Throughput: 55.7 MiB/s.
(--) VIA(0): Ditch    SSE YUV420 copy... Not supported by CPU.
(--) VIA(0): Timed    MMX YUV420 copy... 3481614. Throughput: 90.5 MiB/s.
(--) VIA(0): Timed 3DNow! YUV420 copy... 3715823. Throughput: 84.7 MiB/s.
(--) VIA(0): Ditch   MMX2 YUV420 copy... Not supported by CPU.
(--) VIA(0): Using MMX YUV42X copy for video.
(II) VIA(0): [XvMC] Registering viaXvMC.
(II) VIA(0): [XvMC] Initialized XvMC extension.
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Keyboard0: XkbLayout: "de"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Buttons" "3"
(**) Option "Emulate3Buttons" "off"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Option "Resolution" "400"
(**) Mouse0: Resolution: 400
(**) Option "BaudRate" "1200"
(**) Mouse0: BaudRate: 1200
(**) Option "Protocol" "PS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "PS/2"
(**) Option "AlwaysCore"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "3"
(**) Option "Emulate3Buttons" "off"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(WW) Option "Resolution" requires an integer value
(WW) Option "BaudRate" requires an integer value
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) Mouse1: ps2EnableDataReporting: succeeded
Warning: font renderer for ".cid" already registered at priority 0
ProcXCloseDevice to close or not ?
(II) VIA(0): [drm] Cleaning up DMA ring-buffer.
Meine aktuelle "/opt/ltsp-4.2/i386/etc/lts.conf"

Code: Alles auswählen

[ws199]
        XSERVER                 = via
        X_HORZSYNC              = 30-90
        X_VERTREFRESH           = 30-110
        SCREEN_01               = shell
        SCREEN_02               = shell
        X4_MODULE_01            = "dbe"
        X4_MODULE_02            = "extmod"
        X4_MODULE_03            = "type1"
        X4_MODULE_04            = "glx"
        X4_MODULE_05            = "v4l"
        X4_MODULE_06            = "dri"
        X4_MODULE_07            = "GLcore"
        X4_MODULE_08            = "i2c"
        X4_MODULE_09            = "vbe"
        X4_DRI                  = "mode 0666"
        MODULE_01               = "via_agp"
        MODULE_02               = "via"
        X_DEVICE_OPTION_01      = "DisableIRQ"
        X_DEVICE_OPTION_02      = "EnableAGPDMA"
Weiß jemand was darüber? Brauche ich vielleicht einen anderen Treiber dafür?
Gibt es überhaupt eine DirectRendering - Unterstützung für nicht lokale X-Sessions?

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 3 Gäste