Ich brauche mal Hilfe

Alles rund um die Systemverwaltung, die Administration und Konfiguration Eures Linuxsystems

Moderator: Moderatoren

Antworten
Chris29o
Newbie
Newbie
Beiträge: 4
Registriert: 18. Feb 2005, 21:32

Ich brauche mal Hilfe

Beitrag von Chris29o » 18. Feb 2005, 22:51

Hallo,

ich habe mir mal selber ein Kernel 2.6.10 gebaut und bekomme beim Booten immer eine Fehlermeldung. Kann mir vieleich einer von euch helfen. Ich weiß nicht wie ich das weg bekomme kann ?
PS: Ich bin bei Linux ( SUSE 9.2 ) noch nicht solange dabei aber ich finde es supper.
  • Feb 14 23:44:31 linux syslogd 1.4.1: restart.
    Feb 14 23:44:32 linux /etc/dev.d/block/50-hwscan.dev[4553]: new block device /block/sdb
    Feb 14 23:44:32 linux /etc/dev.d/block/50-hwscan.dev[4579]: new block device /block/sdc
    Feb 14 23:44:32 linux /etc/dev.d/block/51-subfs.dev[4615]: mount block device /block/sdb
    Feb 14 23:44:32 linux /etc/dev.d/block/51-subfs.dev[4630]: mount block device /block/sdc
    Feb 14 23:44:33 linux /etc/dev.d/block/50-hwscan.dev[4834]: new block device /block/sdd
    Feb 14 23:44:33 linux /etc/dev.d/block/51-subfs.dev[4850]: mount block device /block/sdd
    Feb 14 23:44:36 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Feb 14 23:44:36 linux kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    Feb 14 23:44:36 linux kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
    Feb 14 23:44:36 linux kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
    Feb 14 23:44:36 linux kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
    Feb 14 23:44:36 linux kernel: ohci_hcd 0000:00:02.0: irq 11, pci mem f8874000
    Feb 14 23:44:36 linux kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    Feb 14 23:44:36 linux kernel: usb usb1: Product: OHCI Host Controller
    Feb 14 23:44:36 linux kernel: usb usb1: Manufacturer: Linux 2.6.8-24-default ohci_hcd
    Feb 14 23:44:36 linux kernel: usb usb1: SerialNumber: 0000:00:02.0
    Feb 14 23:44:36 linux kernel: hub 1-0:1.0: USB hub found
    Feb 14 23:44:36 linux kernel: hub 1-0:1.0: 3 ports detected
    Feb 14 23:44:36 linux kernel: ACPI: PCI interrupt 0000:00:02.1 -> GSI 5 (level, low) -> IRQ 5
    Feb 14 23:44:36 linux kernel: ohci_hcd 0000:00:02.1: OHCI Host Controller
    Feb 14 23:44:36 linux kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64
    Feb 14 23:44:36 linux kernel: ohci_hcd 0000:00:02.1: irq 5, pci mem f8876000
    Feb 14 23:44:36 linux kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
    Feb 14 23:44:36 linux kernel: usb usb2: Product: OHCI Host Controller
    Feb 14 23:44:36 linux kernel: usb usb2: Manufacturer: Linux 2.6.8-24-default ohci_hcd
    Feb 14 23:44:36 linux kernel: usb usb2: SerialNumber: 0000:00:02.1
    Feb 14 23:44:36 linux kernel: hub 2-0:1.0: USB hub found
    Feb 14 23:44:36 linux kernel: hub 2-0:1.0: 3 ports detected
    Feb 14 23:44:36 linux kernel: usb 1-1: new full speed USB device using address 2
    Feb 14 23:44:36 linux kernel: usb 1-1: Product: USB 7-in-1 Card Reader
    Feb 14 23:44:36 linux kernel: usb 1-1: Manufacturer: OTi
    Feb 14 23:44:36 linux kernel: usb 1-1: SerialNumber: 0123456789abcdef
    Feb 14 23:44:36 linux kernel: usb 1-3: new low speed USB device using address 3
    Feb 14 23:44:36 linux kernel: usb 1-3: Product: USB-PS/2 Optical Mouse
    Feb 14 23:44:36 linux kernel: usb 1-3: Manufacturer: B16_b_02
    Feb 14 23:44:36 linux kernel: usb 2-3: new full speed USB device using address 2
    Feb 14 23:44:36 linux kernel: usb 2-3: Product: DeskJet 845C
    Feb 14 23:44:36 linux kernel: usb 2-3: Manufacturer: Hewlett-Packard
    Feb 14 23:44:36 linux kernel: usb 2-3: SerialNumber: CN1AH1M0BCSX
    Feb 14 23:44:36 linux kernel: ieee1394: Initialized config rom entry `ip1394'
    Feb 14 23:44:36 linux kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
    Feb 14 23:44:36 linux kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10
    Feb 14 23:44:36 linux kernel: PCI: Setting latency timer of device 0000:00:0d.0 to 64
    Feb 14 23:44:36 linux kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e9082000-e90827ff] Max Packet=[2048]
    Feb 14 23:44:36 linux kernel: Linux agpgart interface v0.100 (c) Dave Jones
    Feb 14 23:44:36 linux kernel: agpgart: Detected NVIDIA nForce2 chipset
    Feb 14 23:44:36 linux kernel: agpgart: Maximum main memory to use for agp memory: 1430M
    Feb 14 23:44:36 linux kernel: agpgart: AGP aperture is 64M @ 0xe0000000
    Feb 14 23:44:36 linux kernel: 8139too Fast Ethernet driver 0.9.27
    Feb 14 23:44:36 linux kernel: ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 10 (level, low) -> IRQ 10
    Feb 14 23:44:36 linux kernel: eth0: RealTek RTL8139 at 0xf8a52000, 00:0b:2b:04:c1:51, IRQ 10
    Feb 14 23:44:36 linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    Feb 14 23:44:36 linux kernel: ohci1394: fw-host0: SelfID received outside of bus reset sequence
    Feb 14 23:44:36 linux kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 12 (level, low) -> IRQ 12
    Feb 14 23:44:36 linux kernel: ehci_hcd 0000:00:02.2: EHCI Host Controller
    Feb 14 23:44:36 linux kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64
    Feb 14 23:44:36 linux kernel: ehci_hcd 0000:00:02.2: irq 12, pci mem f8a7a000
    Feb 14 23:44:36 linux kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
    Feb 14 23:44:36 linux kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2
    Feb 14 23:44:36 linux kernel: ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    Feb 14 23:44:36 linux kernel: usb usb3: Product: EHCI Host Controller
    Feb 14 23:44:36 linux kernel: usb usb3: Manufacturer: Linux 2.6.8-24-default ehci_hcd
    Feb 14 23:44:36 linux kernel: usb usb3: SerialNumber: 0000:00:02.2
    Feb 14 23:44:36 linux kernel: hub 3-0:1.0: USB hub found
    Feb 14 23:44:36 linux kernel: hub 3-0:1.0: 6 ports detected
    Feb 14 23:44:36 linux kernel: usb 1-1: USB disconnect, address 2
    Feb 14 23:44:36 linux kernel: hdb: ATAPI 48X DVD-ROM drive, 512kB Cache
    Feb 14 23:44:36 linux kernel: Uniform CD-ROM driver Revision: 3.20
    Feb 14 23:44:36 linux kernel: hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Feb 14 23:44:36 linux kernel: st: Version 20040403, fixed bufsize 32768, s/g segs 256
    Feb 14 23:44:36 linux kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc0043162d]
    Feb 14 23:44:36 linux kernel: usb 1-3: USB disconnect, address 3
    Feb 14 23:44:36 linux kernel: usb 2-3: USB disconnect, address 2
    Feb 14 23:44:36 linux kernel: evdev_connect: evdev cdfe62c0 handle cdfe62dc name event0
    Feb 14 23:44:36 linux kernel: evdev_connect: evdev cdfe61c0 handle cdfe61dc name event1
    Feb 14 23:44:36 linux kernel: usb 3-1: new high speed USB device using address 2
    Feb 14 23:44:36 linux kernel: usb 3-1: Product: USB 7-in-1 Card Reader
    Feb 14 23:44:36 linux kernel: usb 3-1: Manufacturer: OTi
    Feb 14 23:44:36 linux kernel: usb 3-1: SerialNumber: 0123456789abcdef
    Feb 14 23:44:36 linux kernel: ohci_hcd 0000:00:02.0: wakeup
    Feb 14 23:44:36 linux kernel: ohci_hcd 0000:00:02.1: wakeup
    Feb 14 23:44:36 linux kernel: usb 1-3: new low speed USB device using address 4
    Feb 14 23:44:36 linux kernel: usb 1-3: Product: USB-PS/2 Optical Mouse
    Feb 14 23:44:36 linux kernel: usb 1-3: Manufacturer: B16_b_02
    Feb 14 23:44:36 linux kernel: usb 2-3: new full speed USB device using address 3
    Feb 14 23:44:36 linux kernel: usb 2-3: Product: DeskJet 845C
    Feb 14 23:44:36 linux kernel: usb 2-3: Manufacturer: Hewlett-Packard
    Feb 14 23:44:36 linux kernel: usb 2-3: SerialNumber: CN1AH1M0BCSX
    Feb 14 23:44:36 linux kernel: Initializing USB Mass Storage driver...
    Feb 14 23:44:36 linux kernel: scsi2 : SCSI emulation for USB Mass Storage devices
    Feb 14 23:44:36 linux kernel: Vendor: OTi Model: CF CARD Reader Rev: 2.00
    Feb 14 23:44:36 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 14 23:44:36 linux kernel: Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
    Feb 14 23:44:36 linux kernel: Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
    Feb 14 23:44:36 linux kernel: Vendor: OTi Model: SM CARD Reader Rev: 2.00
    Feb 14 23:44:36 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 14 23:44:36 linux kernel: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1
    Feb 14 23:44:36 linux kernel: Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 1, type 0
    Feb 14 23:44:36 linux kernel: Vendor: OTi Model: SD CARD Reader Rev: 2.00
    Feb 14 23:44:36 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 14 23:44:36 linux kernel: Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 2
    Feb 14 23:44:36 linux kernel: Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 2, type 0
    Feb 14 23:44:36 linux kernel: Vendor: OTi Model: MS CARD Reader Rev: 2.00
    Feb 14 23:44:36 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 14 23:44:36 linux kernel: Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 3
    Feb 14 23:44:36 linux kernel: Attached scsi generic sg3 at scsi2, channel 0, id 0, lun 3, type 0
    Feb 14 23:44:36 linux kernel: USB Mass Storage device found at 2
    Feb 14 23:44:36 linux kernel: usbcore: registered new driver usb-storage
    Feb 14 23:44:36 linux kernel: USB Mass Storage support registered.
    Feb 14 23:44:36 linux kernel: usbcore: registered new driver hiddev
    Feb 14 23:44:36 linux kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
    Feb 14 23:44:36 linux kernel: usbcore: registered new driver usblp
    Feb 14 23:44:36 linux kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Feb 14 23:44:36 linux kernel: evdev_connect: evdev cde88b60 handle cde88b7c name event2
    Feb 14 23:44:36 linux kernel: input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3
    Feb 14 23:44:36 linux kernel: usbcore: registered new driver usbhid
    Feb 14 23:44:36 linux kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    Feb 14 23:44:36 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
    Feb 14 23:44:58 linux kernel: cdrom: open failed.
    Feb 14 23:45:02 linux last message repeated 4 times
    Feb 14 23:45:07 linux kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    Feb 14 23:45:07 linux kernel: cdrom: open failed.
    Feb 14 23:45:08 linux last message repeated 2 times
    Feb 15 00:04:31 linux -- MARK --
    Feb 15 00:24:31 linux -- MARK --
    Feb 15 00:44:31 linux -- MARK --
    Feb 15 01:04:31 linux -- MARK --
    Feb 15 01:24:31 linux -- MARK --
    Feb 15 01:44:31 linux -- MARK --
    Feb 15 02:04:32 linux -- MARK --
    Feb 15 02:24:32 linux -- MARK --
    Feb 15 02:44:32 linux -- MARK --
    Feb 15 03:04:32 linux -- MARK --
    Feb 15 03:24:32 linux -- MARK --
    Feb 15 03:44:32 linux -- MARK --
    Feb 15 04:04:32 linux -- MARK --
    Feb 15 04:24:32 linux -- MARK --
    Feb 15 04:44:32 linux -- MARK --
    Feb 15 05:04:32 linux -- MARK --
    Feb 15 05:24:32 linux -- MARK --
    Feb 15 05:44:32 linux -- MARK --
    Feb 15 06:04:32 linux -- MARK --
    Feb 15 06:24:32 linux -- MARK --
    Feb 15 06:44:32 linux -- MARK --
    Feb 15 07:02:08 linux kernel: cdrom: open failed.
    Feb 15 07:02:08 linux kernel: cdrom: open failed.
    Feb 15 07:02:08 linux kernel: NET: Registered protocol family 17
    Feb 15 07:02:14 linux kernel: cdrom: open failed.
    Feb 15 07:02:23 linux last message repeated 7 times
    Feb 15 07:04:05 linux ifdown: No configuration found for eth0
    Feb 15 07:04:05 linux ifdown: Nevertheless the interface will be shut down.
    Feb 15 07:04:05 linux su: (to root) root on none
    Feb 15 07:04:05 linux su: pam_unix2: session started for user root, service su
    Feb 15 07:04:06 linux su: pam_unix2: session finished for user root, service su
    Feb 15 07:04:08 linux kernel: NET: Registered protocol family 10
    Feb 15 07:04:08 linux kernel: Disabled Privacy Extensions on device c037f6a0(lo)
    Feb 15 07:04:08 linux kernel: IPv6 over IPv4 tunneling driver
    Feb 15 07:04:08 linux kernel: ip6_tables: (C) 2000-2002 Netfilter core team
    Feb 15 07:04:09 linux kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Feb 15 07:04:09 linux modprobe: WARNING: Error inserting ipfwadm (/lib/modules/2.6.8-24-default/kernel/net/ipv4/netfilter/ipfwadm.ko): Device or resource busy
    Feb 15 07:04:09 linux kernel: ip_conntrack version 2.1 (8192 buckets, 65536 max) - 336 bytes per conntrack
    Feb 15 07:04:09 linux SuSEfirewall2: Firewall rules unloaded.
    Feb 15 07:04:09 linux SuSEfirewall2: Warning: no interface active
    Feb 15 07:04:09 linux kernel: ip6_conntrack version 0.1 (8192 buckets, 65536 max) - 208 bytes per conntrack
    Feb 15 07:04:10 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 15 07:04:10 linux kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    Feb 15 07:04:11 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 15 07:04:12 linux SuSEfirewall2: Firewall rules unloaded.
    Feb 15 07:04:12 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 15 07:04:14 linux logger: BEGIN OF YAST2 INTERNET TEST
    Feb 15 07:04:18 linux kernel: Disabled Privacy Extensions on device c1ec9000(sit0)
    Feb 15 07:04:20 linux kernel: eth0: no IPv6 routers present
    Feb 15 07:04:23 linux ifup: No configuration found for sit0
    Feb 15 07:04:44 linux logger: END OF YAST2 INTERNET TEST
    Feb 15 07:21:23 linux groupadd: group already exists - group=postfix, by=0
    Feb 15 07:21:23 linux groupadd: group already exists - group=maildrop, by=0
    Feb 15 07:21:29 linux groupadd: group already exists - group=ntadmin, by=0
    Feb 15 07:21:34 linux groupadd: group already exists - group=ntadmin, by=0
    Feb 15 07:22:45 linux init: Re-reading inittab
    Feb 15 07:23:23 linux init: Re-reading inittab
    Feb 15 07:23:27 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:23:35 linux last message repeated 55 times
    Feb 15 07:23:35 linux kernel: cdrom: open failed.
    Feb 15 07:23:35 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:23:35 linux last message repeated 31 times
    Feb 15 07:23:36 linux kernel: cdrom: open failed.
    Feb 15 07:23:41 linux kernel: cdrom: open failed.
    Feb 15 07:23:41 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:23:41 linux last message repeated 31 times
    Feb 15 07:23:42 linux kernel: cdrom: open failed.
    Feb 15 07:23:42 linux kernel: cdrom: open failed.
    Feb 15 07:23:42 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:23:42 linux last message repeated 31 times
    Feb 15 07:23:42 linux kernel: cdrom: open failed.
    Feb 15 07:23:42 linux kernel: cdrom: open failed.
    Feb 15 07:23:42 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:23:42 linux last message repeated 31 times
    Feb 15 07:23:43 linux kernel: cdrom: open failed.
    Feb 15 07:23:43 linux hcid[14170]: Bluetooth HCI daemon
    Feb 15 07:23:43 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:23:43 linux hcid[14170]: Can't open HCI socket. Address family not supported by protocol(97)
    Feb 15 07:23:43 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:23:43 linux sdpd[14174]: init_server: opening L2CAP socket: Address family not supported by protocol
    Feb 15 07:23:43 linux sdpd[14174]: main: Server initialization failed
    Feb 15 07:23:43 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:23:43 linux last message repeated 2 times
    Feb 15 07:24:30 linux kernel: cdrom: open failed.
    Feb 15 07:24:30 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:24:30 linux last message repeated 31 times
    Feb 15 07:24:31 linux kernel: cdrom: open failed.
    Feb 15 07:24:31 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:24:33 linux last message repeated 50 times
    Feb 15 07:24:35 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 15 07:24:35 linux SuSEfirewall2: Firewall rules unloaded.
    Feb 15 07:24:35 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 15 07:24:35 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 15 07:24:36 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:24:38 linux last message repeated 285 times
    Feb 15 07:24:41 linux init: Entering runlevel: 5
    Feb 15 07:24:41 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 15 07:24:41 linux SuSEfirewall2: Firewall rules set to CLOSE.
    Feb 15 07:24:42 linux kernel: Kernel logging (proc) stopped.
    Feb 15 07:24:42 linux kernel: Kernel log daemon terminating.
    Feb 15 07:24:43 linux exiting on signal 15
    Feb 15 07:24:43 linux syslogd 1.4.1: restart.
    Feb 15 07:24:43 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 15 07:24:43 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 15 07:24:45 linux sshd[16145]: Server listening on :: port 22.
    Feb 15 07:24:45 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:24:45 linux last message repeated 5 times
    Feb 15 07:24:45 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
    Feb 15 07:24:45 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
    Feb 15 07:24:46 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:24:47 linux last message repeated 53 times
    Feb 15 07:24:48 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Feb 15 07:24:48 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 15 07:24:48 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 15 07:24:50 linux /usr/sbin/cron[16581]: (CRON) STARTUP (V5.0)
    Feb 15 07:24:50 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 15 07:24:50 linux kdm: :0[16444]: pam_unix2: session started for user user, service xdm-np
    Feb 15 07:24:51 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 15 07:25:09 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux last message repeated 54 times
    Feb 15 07:25:21 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    Feb 15 07:25:21 linux kernel: Unable to load NLS charset utf8
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux submountd: mount failure, No such device
    Feb 15 07:25:21 linux kernel: subfs: unsuccessful attempt to mount media (256)
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    Feb 15 07:25:21 linux kernel: Unable to load NLS charset utf8
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux submountd: mount failure, No such device
    Feb 15 07:25:21 linux kernel: subfs: unsuccessful attempt to mount media (256)
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    Feb 15 07:25:21 linux kernel: Unable to load NLS charset utf8
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux submountd: mount failure, No such device
    Feb 15 07:25:21 linux kernel: subfs: unsuccessful attempt to mount media (256)
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    Feb 15 07:25:21 linux kernel: Unable to load NLS charset utf8
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux submountd: mount failure, No such device
    Feb 15 07:25:21 linux kernel: subfs: unsuccessful attempt to mount media (256)
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    Feb 15 07:25:21 linux kernel: Unable to load NLS charset utf8
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux submountd: mount failure, No such device
    Feb 15 07:25:21 linux kernel: subfs: unsuccessful attempt to mount media (256)
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    Feb 15 07:25:21 linux kernel: Unable to load NLS charset utf8
    Feb 15 07:25:21 linux modprobe: FATAL: Could not load /lib/modules/2.6.8-24-default/modules.dep: No such file or directory
    Feb 15 07:25:21 linux submountd: mount failure, No such device
    Feb 15 07:25:21 linux kernel: subfs: unsuccessful attempt to mount media (256)
    Feb 15 07:25:37 linux su: (to root) user on /dev/pts/2
    Feb 15 07:25:37 linux su: pam_unix2: session started for user root, service su
    Feb 15 07:25:37 linux su: pam_unix2: session finished for user root, service su
    Feb 15 07:25:37 linux su: (to root) user on /dev/pts/2
    Feb 15 07:25:37 linux su: pam_unix2: session started for user root, service su
    Feb 15 07:26:02 linux su: pam_unix2: session finished for user root, service su
    Feb 15 07:26:45 linux su: (to root) user on /dev/pts/2
    Feb 15 07:26:45 linux su: pam_unix2: session started for user root, service su
    Feb 15 07:26:45 linux su: pam_unix2: session finished for user root, service su
    Feb 15 07:26:45 linux su: (to root) user on /dev/pts/2
    Feb 15 07:26:45 linux su: pam_unix2: session started for user root, service su
    Feb 15 07:26:51 linux su: pam_unix2: session finished for user root, service su
    Feb 15 07:44:30 linux -- MARK --
    Feb 15 07:47:15 linux kdm: :0[16444]: pam_unix2: session finished for user user, service xdm-np
    Feb 15 07:47:15 linux init: Switching to runlevel: 0
    Feb 15 07:47:16 linux sshd[16145]: Received signal 15; terminating.
    Feb 15 07:47:17 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 15 07:47:17 linux SuSEfirewall2: Firewall rules unloaded.
    Feb 15 07:47:17 linux kernel: Kernel logging (proc) stopped.
    Feb 15 07:47:17 linux kernel: Kernel log daemon terminating.
    Feb 15 07:47:18 linux exiting on signal 15
    Feb 15 23:06:53 linux syslogd 1.4.1: restart.
    Feb 15 23:06:53 linux SuSEfirewall2: Another SuSEfirewall2 with PID 3620 found, waiting ...
    Feb 15 23:06:53 linux /sbin/hotplug[2660]: ... no drivers for IEEE1394 product 0x/0x/0x
    Feb 15 23:06:54 linux /etc/dev.d/net/50-ifup.dev[3534]: SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 15 23:06:54 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 15 23:06:55 linux /sbin/hotplug[2994]: ... no drivers for IEEE1394 product 0x/0x/0x
    Feb 15 23:06:55 linux /sbin/hotplug[3022]: ... no drivers for IEEE1394 product 0x/0x/0x
    Feb 15 23:06:58 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Feb 15 23:06:58 linux kernel: ieee1394: Initialized config rom entry `ip1394'
    Feb 15 23:06:58 linux kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
    Feb 15 23:06:58 linux kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10
    Feb 15 23:06:58 linux kernel: PCI: Setting latency timer of device 0000:00:0d.0 to 64
    Feb 15 23:06:58 linux kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e9082000-e90827ff] Max Packet=[2048]
    Feb 15 23:06:58 linux kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 12 (level, low) -> IRQ 12
    Feb 15 23:06:58 linux kernel: ehci_hcd 0000:00:02.2: EHCI Host Controller
    Feb 15 23:06:58 linux kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64
    Feb 15 23:06:58 linux kernel: ehci_hcd 0000:00:02.2: irq 12, pci mem f8a56000
    Feb 15 23:06:58 linux kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
    Feb 15 23:06:58 linux kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2
    Feb 15 23:06:58 linux kernel: ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    Feb 15 23:06:58 linux kernel: usb usb1: Product: EHCI Host Controller
    Feb 15 23:06:58 linux kernel: usb usb1: Manufacturer: Linux 2.6.8-24.11-default ehci_hcd
    Feb 15 23:06:58 linux kernel: usb usb1: SerialNumber: 0000:00:02.2
    Feb 15 23:06:58 linux kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    Feb 15 23:06:59 linux kernel: Linux agpgart interface v0.100 (c) Dave Jones
    Feb 15 23:06:59 linux kernel: hub 1-0:1.0: USB hub found
    Feb 15 23:06:59 linux kernel: hub 1-0:1.0: 6 ports detected
    Feb 15 23:06:59 linux kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
    Feb 15 23:06:59 linux kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
    Feb 15 23:06:59 linux kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
    Feb 15 23:06:59 linux kernel: ohci_hcd 0000:00:02.0: irq 11, pci mem f8a58000
    Feb 15 23:06:59 linux kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    Feb 15 23:06:59 linux kernel: usb usb2: Product: OHCI Host Controller
    Feb 15 23:06:59 linux kernel: usb usb2: Manufacturer: Linux 2.6.8-24.11-default ohci_hcd
    Feb 15 23:06:59 linux kernel: usb usb2: SerialNumber: 0000:00:02.0
    Feb 15 23:06:59 linux kernel: hub 2-0:1.0: USB hub found
    Feb 15 23:06:59 linux kernel: hub 2-0:1.0: 3 ports detected
    Feb 15 23:06:59 linux kernel: ACPI: PCI interrupt 0000:00:02.1 -> GSI 5 (level, low) -> IRQ 5
    Feb 15 23:06:59 linux kernel: ohci_hcd 0000:00:02.1: OHCI Host Controller
    Feb 15 23:06:59 linux kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64
    Feb 15 23:06:59 linux kernel: ohci_hcd 0000:00:02.1: irq 5, pci mem f8a5a000
    Feb 15 23:06:59 linux kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
    Feb 15 23:06:59 linux kernel: usb usb3: Product: OHCI Host Controller
    Feb 15 23:06:59 linux kernel: usb usb3: Manufacturer: Linux 2.6.8-24.11-default ohci_hcd
    Feb 15 23:06:59 linux kernel: usb usb3: SerialNumber: 0000:00:02.1
    Feb 15 23:06:59 linux kernel: ohci1394: fw-host0: SelfID received outside of bus reset sequence
    Feb 15 23:06:59 linux kernel: hub 3-0:1.0: USB hub found
    Feb 15 23:06:59 linux kernel: hub 3-0:1.0: 3 ports detected
    Feb 15 23:06:59 linux kernel: agpgart: Detected NVIDIA nForce2 chipset
    Feb 15 23:06:59 linux kernel: agpgart: Maximum main memory to use for agp memory: 1430M
    Feb 15 23:06:59 linux kernel: agpgart: AGP aperture is 64M @ 0xe0000000
    Feb 15 23:06:59 linux kernel: usb 1-1: new high speed USB device using address 2
    Feb 15 23:06:59 linux kernel: usb 1-1: Product: USB 7-in-1 Card Reader
    Feb 15 23:06:59 linux kernel: usb 1-1: Manufacturer: OTi
    Feb 15 23:06:59 linux kernel: usb 1-1: SerialNumber: 0123456789abcdef
    Feb 15 23:06:59 linux kernel: ohci_hcd 0000:00:02.0: wakeup
    Feb 15 23:06:59 linux kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc0043162d]
    Feb 15 23:06:59 linux kernel: ohci_hcd 0000:00:02.1: wakeup
    Feb 15 23:06:59 linux kernel: usb 2-3: new low speed USB device using address 2
    Feb 15 23:06:59 linux kernel: usb 2-3: Product: USB-PS/2 Optical Mouse
    Feb 15 23:06:59 linux kernel: usb 2-3: Manufacturer: B16_b_02
    Feb 15 23:06:59 linux kernel: usb 3-3: new full speed USB device using address 2
    Feb 15 23:06:59 linux kernel: usb 3-3: Product: DeskJet 845C
    Feb 15 23:06:59 linux kernel: usb 3-3: Manufacturer: Hewlett-Packard
    Feb 15 23:06:59 linux kernel: usb 3-3: SerialNumber: CN1AH1M0BCSX
    Feb 15 23:06:59 linux kernel: NET: Registered protocol family 10
    Feb 15 23:06:59 linux kernel: Disabled Privacy Extensions on device c037f760(lo)
    Feb 15 23:06:59 linux kernel: IPv6 over IPv4 tunneling driver
    Feb 15 23:06:59 linux kernel: ip6_tables: (C) 2000-2002 Netfilter core team
    Feb 15 23:06:59 linux kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Feb 15 23:06:59 linux kernel: ip_conntrack version 2.1 (8192 buckets, 65536 max) - 336 bytes per conntrack
    Feb 15 23:06:59 linux kernel: ip6_conntrack version 0.1 (8192 buckets, 65536 max) - 208 bytes per conntrack
    Feb 15 23:06:59 linux kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    Feb 15 23:06:59 linux kernel: hdb: ATAPI 48X DVD-ROM drive, 512kB Cache
    Feb 15 23:06:59 linux kernel: Uniform CD-ROM driver Revision: 3.20
    Feb 15 23:06:59 linux kernel: hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Feb 15 23:06:59 linux kernel: st: Version 20040403, fixed bufsize 32768, s/g segs 256
    Feb 15 23:06:59 linux kernel: evdev_connect: evdev cde88580 handle cde8859c name event0
    Feb 15 23:06:59 linux kernel: evdev_connect: evdev cde88480 handle cde8849c name event1
    Feb 15 23:06:59 linux kernel: usbcore: registered new driver hiddev
    Feb 15 23:06:59 linux kernel: evdev_connect: evdev cde85b60 handle cde85b7c name event2
    Feb 15 23:06:59 linux kernel: input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3
    Feb 15 23:06:59 linux kernel: usbcore: registered new driver usbhid
    Feb 15 23:06:59 linux kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    Feb 15 23:06:59 linux kernel: Initializing USB Mass Storage driver...
    Feb 15 23:06:59 linux kernel: scsi2 : SCSI emulation for USB Mass Storage devices
    Feb 15 23:06:59 linux kernel: Vendor: OTi Model: CF CARD Reader Rev: 2.00
    Feb 15 23:06:59 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 15 23:06:59 linux kernel: Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
    Feb 15 23:06:59 linux kernel: Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
    Feb 15 23:06:59 linux kernel: Vendor: OTi Model: SM CARD Reader Rev: 2.00
    Feb 15 23:06:59 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 15 23:06:59 linux kernel: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1
    Feb 15 23:06:59 linux kernel: Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 1, type 0
    Feb 15 23:06:59 linux kernel: Vendor: OTi Model: SD CARD Reader Rev: 2.00
    Feb 15 23:06:59 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 15 23:07:00 linux kernel: Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 2
    Feb 15 23:07:00 linux kernel: Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 2, type 0
    Feb 15 23:07:00 linux kernel: Vendor: OTi Model: MS CARD Reader Rev: 2.00
    Feb 15 23:07:00 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 15 23:07:00 linux kernel: Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 3
    Feb 15 23:07:00 linux kernel: Attached scsi generic sg3 at scsi2, channel 0, id 0, lun 3, type 0
    Feb 15 23:07:00 linux kernel: USB Mass Storage device found at 2
    Feb 15 23:07:00 linux kernel: usbcore: registered new driver usb-storage
    Feb 15 23:07:00 linux kernel: USB Mass Storage support registered.
    Feb 15 23:07:00 linux kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
    Feb 15 23:07:00 linux kernel: usbcore: registered new driver usblp
    Feb 15 23:07:00 linux kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Feb 15 23:07:01 linux kernel: Disabled Privacy Extensions on device f6e3f400(sit0)
    Feb 15 23:07:02 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 15 23:07:03 linux kernel: eth0: no IPv6 routers present
    Feb 15 23:07:03 linux /etc/dev.d/block/50-hwscan.dev[5154]: new block device /block/hdd
    Feb 15 23:07:03 linux /etc/dev.d/block/50-hwscan.dev[5149]: new block device /block/hdb
    Feb 15 23:07:03 linux /etc/dev.d/block/51-subfs.dev[5174]: mount block device /block/hdb
    Feb 15 23:07:03 linux /etc/dev.d/block/51-subfs.dev[5166]: mount block device /block/hdd
    Feb 15 23:07:04 linux kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5
    Feb 15 23:07:04 linux kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64
    Feb 15 23:07:04 linux sshd[5289]: Server listening on :: port 22.
    Feb 15 23:07:04 linux kernel: intel8x0_measure_ac97_clock: measured 49567 usecs
    Feb 15 23:07:04 linux kernel: intel8x0: clocking to 47426
    Feb 15 23:07:05 linux kernel: ACPI: Power Button (FF) [PWRF]
    Feb 15 23:07:05 linux kernel: ACPI: Fan [FAN] (on)
    Feb 15 23:07:05 linux kernel: ACPI: Processor [CPU0] (supports C1)
    Feb 15 23:07:05 linux kernel: ACPI: Thermal Zone [THRM] (51 C)
    Feb 15 23:07:06 linux kernel: powernow-k8: Processor cpuid 681 not supported
    Feb 15 23:07:06 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
    Feb 15 23:07:06 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
    Feb 15 23:07:06 linux ifup: No configuration found for sit0
    Feb 15 23:07:06 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
    Feb 15 23:07:09 linux /etc/dev.d/block/50-hwscan.dev[5761]: new block device /block/sda
    Feb 15 23:07:09 linux /etc/dev.d/block/51-subfs.dev[5772]: mount block device /block/sda
    Feb 15 23:07:10 linux kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
    Feb 15 23:07:10 linux kernel: parport0: irq 7 detected
    Feb 15 23:07:10 linux kernel: lp0: using parport0 (polling).
    Feb 15 23:07:10 linux /etc/dev.d/block/50-hwscan.dev[5952]: new block device /block/sdb
    Feb 15 23:07:10 linux /etc/dev.d/block/50-hwscan.dev[6031]: new block device /block/sdc
    Feb 15 23:07:10 linux /etc/dev.d/block/51-subfs.dev[6042]: mount block device /block/sdb
    Feb 15 23:07:10 linux /etc/dev.d/block/51-subfs.dev[6053]: mount block device /block/sdc
    Feb 15 23:07:10 linux /etc/dev.d/block/50-hwscan.dev[6199]: new block device /block/sdd
    Feb 15 23:07:11 linux /etc/dev.d/block/51-subfs.dev[6210]: mount block device /block/sdd
    Feb 15 23:07:12 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
    Feb 15 23:07:12 linux kernel: usbcore: registered new driver usbserial_generic
    Feb 15 23:07:12 linux kernel: usbcore: registered new driver usbserial
    Feb 15 23:07:12 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
    Feb 15 23:07:15 linux kernel: Non-volatile memory driver v1.2
    Feb 15 23:07:15 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 15 23:07:15 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 15 23:07:17 linux kdm: :0[5725]: pam_unix2: session started for user user, service xdm-np
    Feb 15 23:07:19 linux /usr/sbin/cron[6576]: (CRON) STARTUP (V5.0)
    Feb 15 23:07:22 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 15 23:07:36 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    Feb 15 23:07:36 linux kernel: ISO 9660 Extensions: RRIP_1991A
    Feb 15 23:26:53 linux -- MARK --
    Feb 15 23:46:53 linux -- MARK --
    Feb 15 23:59:01 linux /usr/sbin/cron[7324]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
    Feb 16 00:26:53 linux -- MARK --
    Feb 16 00:43:46 linux su: (to root) user on /dev/pts/2
    Feb 16 00:43:46 linux su: pam_unix2: session started for user root, service su
    Feb 16 00:43:46 linux su: pam_unix2: session finished for user root, service su
    Feb 16 00:43:46 linux su: (to root) user on /dev/pts/2
    Feb 16 00:43:46 linux su: pam_unix2: session started for user root, service su
    Feb 16 00:59:01 linux /usr/sbin/cron[8696]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
    Feb 16 01:21:43 linux kernel: UDF-fs: No VRS found
    Feb 16 01:21:43 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    Feb 16 01:21:43 linux kernel: ISO 9660 Extensions: RRIP_1991A
    Feb 16 01:21:51 linux su: pam_unix2: session finished for user root, service su
    Feb 16 01:22:41 linux gconfd (root-8936): starting (version 2.6.1), pid 8936 user 'root'
    Feb 16 01:22:41 linux gconfd (root-8936): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only config source at position 0
    Feb 16 01:22:41 linux gconfd (root-8936): Resolved address "xml:readwrite:/root/.gconf" to a writable config source at position 1
    Feb 16 01:22:41 linux gconfd (root-8936): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only config source at position 2
    Feb 16 01:23:11 linux gconfd (root-8936): GConf server is not in use, shutting down.
    Feb 16 01:23:11 linux gconfd (root-8936): Exiting
    Feb 16 01:24:03 linux gconfd (root-9192): starting (version 2.6.1), pid 9192 user 'root'
    Feb 16 01:24:04 linux gconfd (root-9192): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only config source at position 0
    Feb 16 01:24:04 linux gconfd (root-9192): Resolved address "xml:readwrite:/root/.gconf" to a writable config source at position 1
    Feb 16 01:24:04 linux gconfd (root-9192): Resolved address "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" to a read-only config source at position 2
    Feb 16 01:24:14 linux gconfd (root-9192): Exiting
    Feb 16 01:38:40 linux kdm: :0[5725]: pam_unix2: session finished for user user, service xdm-np
    Feb 16 01:38:41 linux init: Switching to runlevel: 0
    Feb 16 01:38:42 linux sshd[5289]: Received signal 15; terminating.
    Feb 16 01:38:43 linux SuSEfirewall2: Firewall rules unloaded.
    Feb 16 01:38:43 linux kernel: Kernel logging (proc) stopped.
    Feb 16 01:38:43 linux kernel: Kernel log daemon terminating.
    Feb 16 01:38:44 linux exiting on signal 15
    Feb 16 17:40:32 linux syslogd 1.4.1: restart.
    Feb 16 17:40:33 linux /sbin/hotplug[2499]: ... no drivers for IEEE1394 product 0x/0x/0x
    Feb 16 17:40:35 linux /sbin/hotplug[2818]: ... no drivers for IEEE1394 product 0x/0x/0x
    Feb 16 17:40:35 linux /sbin/hotplug[2797]: ... no drivers for IEEE1394 product 0x/0x/0x
    Feb 16 17:40:38 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Feb 16 17:40:38 linux kernel: ieee1394: Initialized config rom entry `ip1394'
    Feb 16 17:40:38 linux kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
    Feb 16 17:40:38 linux kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10
    Feb 16 17:40:38 linux kernel: PCI: Setting latency timer of device 0000:00:0d.0 to 64
    Feb 16 17:40:38 linux kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e9082000-e90827ff] Max Packet=[2048]
    Feb 16 17:40:38 linux kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 12 (level, low) -> IRQ 12
    Feb 16 17:40:38 linux kernel: ehci_hcd 0000:00:02.2: EHCI Host Controller
    Feb 16 17:40:38 linux kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64
    Feb 16 17:40:38 linux kernel: ehci_hcd 0000:00:02.2: irq 12, pci mem f8a54000
    Feb 16 17:40:38 linux kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    Feb 16 17:40:38 linux kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
    Feb 16 17:40:39 linux kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2
    Feb 16 17:40:39 linux kernel: ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    Feb 16 17:40:39 linux kernel: usb usb1: Product: EHCI Host Controller
    Feb 16 17:40:39 linux kernel: usb usb1: Manufacturer: Linux 2.6.8-24.11-default ehci_hcd
    Feb 16 17:40:39 linux kernel: usb usb1: SerialNumber: 0000:00:02.2
    Feb 16 17:40:39 linux kernel: hub 1-0:1.0: USB hub found
    Feb 16 17:40:39 linux kernel: hub 1-0:1.0: 6 ports detected
    Feb 16 17:40:39 linux kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
    Feb 16 17:40:39 linux kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
    Feb 16 17:40:39 linux kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
    Feb 16 17:40:39 linux kernel: ohci_hcd 0000:00:02.0: irq 11, pci mem f8a56000
    Feb 16 17:40:39 linux kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    Feb 16 17:40:39 linux kernel: usb usb2: Product: OHCI Host Controller
    Feb 16 17:40:39 linux kernel: usb usb2: Manufacturer: Linux 2.6.8-24.11-default ohci_hcd
    Feb 16 17:40:39 linux kernel: usb usb2: SerialNumber: 0000:00:02.0
    Feb 16 17:40:39 linux kernel: hub 2-0:1.0: USB hub found
    Feb 16 17:40:39 linux kernel: hub 2-0:1.0: 3 ports detected
    Feb 16 17:40:39 linux kernel: ACPI: PCI interrupt 0000:00:02.1 -> GSI 5 (level, low) -> IRQ 5
    Feb 16 17:40:39 linux kernel: ohci_hcd 0000:00:02.1: OHCI Host Controller
    Feb 16 17:40:39 linux kernel: ohci1394: fw-host0: SelfID received outside of bus reset sequence
    Feb 16 17:40:39 linux kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64
    Feb 16 17:40:39 linux kernel: ohci_hcd 0000:00:02.1: irq 5, pci mem f8a58000
    Feb 16 17:40:39 linux kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
    Feb 16 17:40:39 linux kernel: usb usb3: Product: OHCI Host Controller
    Feb 16 17:40:39 linux kernel: usb usb3: Manufacturer: Linux 2.6.8-24.11-default ohci_hcd
    Feb 16 17:40:39 linux kernel: usb usb3: SerialNumber: 0000:00:02.1
    Feb 16 17:40:39 linux kernel: Linux agpgart interface v0.100 (c) Dave Jones
    Feb 16 17:40:39 linux kernel: hub 3-0:1.0: USB hub found
    Feb 16 17:40:39 linux kernel: hub 3-0:1.0: 3 ports detected
    Feb 16 17:40:39 linux kernel: agpgart: Detected NVIDIA nForce2 chipset
    Feb 16 17:40:39 linux kernel: agpgart: Maximum main memory to use for agp memory: 1430M
    Feb 16 17:40:39 linux kernel: agpgart: AGP aperture is 64M @ 0xe0000000
    Feb 16 17:40:39 linux kernel: usb 1-1: new high speed USB device using address 2
    Feb 16 17:40:39 linux kernel: usb 1-1: Product: USB 7-in-1 Card Reader
    Feb 16 17:40:39 linux kernel: usb 1-1: Manufacturer: OTi
    Feb 16 17:40:39 linux kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc0043162d]
    Feb 16 17:40:39 linux kernel: usb 1-1: SerialNumber: 0123456789abcdef
    Feb 16 17:40:39 linux kernel: ohci_hcd 0000:00:02.0: wakeup
    Feb 16 17:40:39 linux kernel: ohci_hcd 0000:00:02.1: wakeup
    Feb 16 17:40:39 linux kernel: usb 2-3: new low speed USB device using address 2
    Feb 16 17:40:39 linux kernel: usb 2-3: Product: USB-PS/2 Optical Mouse
    Feb 16 17:40:39 linux kernel: usb 2-3: Manufacturer: B16_b_02
    Feb 16 17:40:39 linux kernel: usb 3-3: new full speed USB device using address 2
    Feb 16 17:40:39 linux kernel: usb 3-3: Product: DeskJet 845C
    Feb 16 17:40:39 linux kernel: usb 3-3: Manufacturer: Hewlett-Packard
    Feb 16 17:40:39 linux kernel: usb 3-3: SerialNumber: CN1AH1M0BCSX
    Feb 16 17:40:39 linux kernel: NET: Registered protocol family 10
    Feb 16 17:40:39 linux kernel: Disabled Privacy Extensions on device c037f760(lo)
    Feb 16 17:40:39 linux kernel: IPv6 over IPv4 tunneling driver
    Feb 16 17:40:39 linux kernel: ip6_tables: (C) 2000-2002 Netfilter core team
    Feb 16 17:40:39 linux kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Feb 16 17:40:39 linux kernel: ip_conntrack version 2.1 (8192 buckets, 65536 max) - 336 bytes per conntrack
    Feb 16 17:40:39 linux kernel: ip6_conntrack version 0.1 (8192 buckets, 65536 max) - 208 bytes per conntrack
    Feb 16 17:40:39 linux kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    Feb 16 17:40:39 linux kernel: hdb: ATAPI 48X DVD-ROM drive, 512kB Cache
    Feb 16 17:40:39 linux kernel: Uniform CD-ROM driver Revision: 3.20
    Feb 16 17:40:39 linux kernel: hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Feb 16 17:40:39 linux kernel: st: Version 20040403, fixed bufsize 32768, s/g segs 256
    Feb 16 17:40:39 linux kernel: evdev_connect: evdev cde88d80 handle cde88d9c name event0
    Feb 16 17:40:39 linux kernel: evdev_connect: evdev cde88c80 handle cde88c9c name event1
    Feb 16 17:40:39 linux kernel: Initializing USB Mass Storage driver...
    Feb 16 17:40:39 linux kernel: scsi2 : SCSI emulation for USB Mass Storage devices
    Feb 16 17:40:39 linux kernel: Vendor: OTi Model: CF CARD Reader Rev: 2.00
    Feb 16 17:40:39 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 16 17:40:39 linux kernel: Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
    Feb 16 17:40:39 linux kernel: Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
    Feb 16 17:40:39 linux kernel: Vendor: OTi Model: SM CARD Reader Rev: 2.00
    Feb 16 17:40:39 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 16 17:40:39 linux kernel: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1
    Feb 16 17:40:39 linux kernel: Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 1, type 0
    Feb 16 17:40:39 linux kernel: Vendor: OTi Model: SD CARD Reader Rev: 2.00
    Feb 16 17:40:39 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 16 17:40:39 linux kernel: Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 2
    Feb 16 17:40:39 linux kernel: Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 2, type 0
    Feb 16 17:40:40 linux kernel: Vendor: OTi Model: MS CARD Reader Rev: 2.00
    Feb 16 17:40:40 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
    Feb 16 17:40:40 linux kernel: Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 3
    Feb 16 17:40:40 linux kernel: Attached scsi generic sg3 at scsi2, channel 0, id 0, lun 3, type 0
    Feb 16 17:40:40 linux kernel: USB Mass Storage device found at 2
    Feb 16 17:40:40 linux kernel: usbcore: registered new driver usb-storage
    Feb 16 17:40:40 linux kernel: USB Mass Storage support registered.
    Feb 16 17:40:40 linux kernel: usbcore: registered new driver hiddev
    Feb 16 17:40:40 linux kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
    Feb 16 17:40:40 linux kernel: usbcore: registered new driver usblp
    Feb 16 17:40:40 linux kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Feb 16 17:40:40 linux kernel: evdev_connect: evdev cde88180 handle cde8819c name event2
    Feb 16 17:40:40 linux kernel: input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3
    Feb 16 17:40:40 linux kernel: usbcore: registered new driver usbhid
    Feb 16 17:40:40 linux kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    Feb 16 17:40:41 linux kernel: Disabled Privacy Extensions on device f6c5b800(sit0)
    Feb 16 17:40:41 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 16 17:40:43 linux kernel: eth0: no IPv6 routers present
    Feb 16 17:40:43 linux /etc/dev.d/block/50-hwscan.dev[4574]: new block device /block/hdd
    Feb 16 17:40:43 linux /etc/dev.d/block/50-hwscan.dev[4572]: new block device /block/hdb
    Feb 16 17:40:43 linux /etc/dev.d/block/51-subfs.dev[4601]: mount block device /block/hdb
    Feb 16 17:40:43 linux /etc/dev.d/block/51-subfs.dev[4584]: mount block device /block/hdd
    Feb 16 17:40:46 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
    Feb 16 17:40:46 linux ifup: No configuration found for sit0
    Feb 16 17:40:46 linux kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5
    Feb 16 17:40:46 linux kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64
    Feb 16 17:40:46 linux sshd[4818]: Server listening on :: port 22.
    Feb 16 17:40:47 linux kernel: intel8x0_measure_ac97_clock: measured 141587 usecs
    Feb 16 17:40:47 linux kernel: intel8x0: clocking to 48000
    Feb 16 17:40:48 linux kernel: ACPI: Power Button (FF) [PWRF]
    Feb 16 17:40:48 linux kernel: ACPI: Fan [FAN] (on)
    Feb 16 17:40:48 linux kernel: ACPI: Processor [CPU0] (supports C1)
    Feb 16 17:40:48 linux kernel: ACPI: Thermal Zone [THRM] (52 C)
    Feb 16 17:40:48 linux kernel: powernow-k8: Processor cpuid 681 not supported
    Feb 16 17:40:48 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
    Feb 16 17:40:48 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
    Feb 16 17:40:49 linux /etc/dev.d/block/50-hwscan.dev[5149]: new block device /block/sda
    Feb 16 17:40:49 linux /etc/dev.d/block/51-subfs.dev[5160]: mount block device /block/sda
    Feb 16 17:40:49 linux /etc/dev.d/block/50-hwscan.dev[5197]: new block device /block/sdb
    Feb 16 17:40:49 linux /etc/dev.d/block/51-subfs.dev[5208]: mount block device /block/sdb
    Feb 16 17:40:49 linux /etc/dev.d/block/50-hwscan.dev[5118]: new block device /block/sdc
    Feb 16 17:40:49 linux /etc/dev.d/block/51-subfs.dev[5225]: mount block device /block/sdc
    Feb 16 17:40:51 linux /etc/dev.d/block/50-hwscan.dev[5487]: new block device /block/sdd
    Feb 16 17:40:51 linux /etc/dev.d/block/51-subfs.dev[5507]: mount block device /block/sdd
    Feb 16 17:40:54 linux kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
    Feb 16 17:40:54 linux kernel: parport0: irq 7 detected
    Feb 16 17:40:54 linux kernel: lp0: using parport0 (polling).
    Feb 16 17:40:55 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
    Feb 16 17:40:55 linux kernel: usbcore: registered new driver usbserial_generic
    Feb 16 17:40:55 linux kernel: usbcore: registered new driver usbserial
    Feb 16 17:40:55 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
    Feb 16 17:40:59 linux kernel: Non-volatile memory driver v1.2
    Feb 16 17:40:59 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 16 17:40:59 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 16 17:41:01 linux kdm: :0[5671]: pam_unix2: session started for user user, service xdm-np
    Feb 16 17:41:03 linux /usr/sbin/cron[6015]: (CRON) STARTUP (V5.0)
    Feb 16 17:41:04 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 16 17:41:21 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    Feb 16 17:41:21 linux kernel: ISO 9660 Extensions: RRIP_1991A
    Feb 16 17:42:04 linux kdm: :0[5671]: pam_unix2: session finished for user user, service xdm-np
    Feb 16 17:42:15 linux kdm: :0[6464]: pam_unix2: session started for user root, service xdm
    Feb 16 17:42:30 linux kernel: SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:0b:2b:04:c1:51:00:0f:b5:14:b5:7a:08:00 SRC=67.171.8.108 DST=192.168.2.130 LEN=53 TOS=0x00 PREC=0x00 TTL=117 ID=32176 PROTO=UDP SPT=10969 DPT=6662 LEN=33
    Feb 16 17:42:37 linux kernel: module thinkpad unsupported by SUSE/Novell, tainting kernel.
    Feb 16 17:42:37 linux kernel: thinkpad: I have registered to handle major: 10 minor: 170.
    Feb 16 17:59:01 linux /usr/sbin/cron[7193]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
    Feb 16 18:20:32 linux -- MARK --
    Feb 16 18:40:32 linux -- MARK --
    Feb 16 18:59:01 linux /usr/sbin/cron[13540]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
    Feb 16 19:20:33 linux -- MARK --
    Feb 16 19:26:09 linux kdm: :0[6464]: pam_unix2: session finished for user root, service xdm
    Feb 16 19:26:10 linux init: Switching to runlevel: 6
    Feb 16 19:26:11 linux sshd[4818]: Received signal 15; terminating.
    Feb 16 19:26:12 linux SuSEfirewall2: Firewall rules unloaded.
    Feb 16 19:26:12 linux kernel: Kernel logging (proc) stopped.
    Feb 16 19:26:12 linux kernel: Kernel log daemon terminating.
    Feb 16 19:26:13 linux exiting on signal 15
    Feb 16 19:27:37 linux syslogd 1.4.1: restart.
    Feb 16 19:27:37 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 16 19:27:38 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 16 19:27:41 linux sshd[6366]: Server listening on :: port 22.
    Feb 16 19:27:42 linux ifup: No configuration found for sit0
    Feb 16 19:27:42 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Feb 16 19:27:42 linux kernel: Linux agpgart interface v0.100 (c) Dave Jones
    Feb 16 19:27:42 linux kernel: ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    Feb 16 19:27:42 linux kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
    Feb 16 19:27:42 linux kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 193
    Feb 16 19:27:42 linux kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
    Feb 16 19:27:42 linux kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
    Feb 16 19:27:42 linux kernel: ohci_hcd 0000:00:02.0: irq 193, pci mem 0xe9084000
    Feb 16 19:27:42 linux kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    Feb 16 19:27:42 linux kernel: ieee1394: Initialized config rom entry `ip1394'
    Feb 16 19:27:42 linux kernel: hub 1-0:1.0: USB hub found
    Feb 16 19:27:42 linux kernel: hub 1-0:1.0: 3 ports detected
    Feb 16 19:27:42 linux kernel: ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
    Feb 16 19:27:42 linux kernel: ACPI: PCI interrupt 0000:00:02.1 -> GSI 21 (level, high) -> IRQ 201
    Feb 16 19:27:42 linux kernel: ohci_hcd 0000:00:02.1: OHCI Host Controller
    Feb 16 19:27:42 linux kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64
    Feb 16 19:27:42 linux kernel: ohci_hcd 0000:00:02.1: irq 201, pci mem 0xe9080000
    Feb 16 19:27:42 linux kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
    Feb 16 19:27:42 linux kernel: hub 2-0:1.0: USB hub found
    Feb 16 19:27:42 linux kernel: hub 2-0:1.0: 3 ports detected
    Feb 16 19:27:42 linux kernel: agpgart: Detected NVIDIA nForce2 chipset
    Feb 16 19:27:42 linux kernel: agpgart: Maximum main memory to use for agp memory: 1430M
    Feb 16 19:27:42 linux kernel: agpgart: AGP aperture is 64M @ 0xe0000000
    Feb 16 19:27:42 linux kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
    Feb 16 19:27:42 linux kernel: ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 209
    Feb 16 19:27:42 linux kernel: ehci_hcd 0000:00:02.2: EHCI Host Controller
    Feb 16 19:27:42 linux kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64
    Feb 16 19:27:42 linux kernel: ehci_hcd 0000:00:02.2: irq 209, pci mem 0xe9081000
    Feb 16 19:27:42 linux kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
    Feb 16 19:27:42 linux kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2
    Feb 16 19:27:42 linux kernel: ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
    Feb 16 19:27:42 linux kernel: hub 3-0:1.0: USB hub found
    Feb 16 19:27:42 linux kernel: hub 3-0:1.0: 6 ports detected
    Feb 16 19:27:42 linux kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
    Feb 16 19:27:42 linux kernel: ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
    Feb 16 19:27:42 linux kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 22 (level, high) -> IRQ 193
    Feb 16 19:27:42 linux kernel: PCI: Setting latency timer of device 0000:00:0d.0 to 64
    Feb 16 19:27:42 linux kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193] MMIO=[e9082000-e90827ff] Max Packet=[2048]
    Feb 16 19:27:42 linux kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
    Feb 16 19:27:42 linux kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
    Feb 16 19:27:42 linux kernel: usb 3-1: new high speed USB device using ehci_hcd and address 2
    Feb 16 19:27:42 linux kernel: usb 3-1: device descriptor read/64, error -32
    Feb 16 19:27:42 linux kernel: ohci1394: fw-host0: SelfID received outside of bus reset sequence
    Feb 16 19:27:42 linux kernel: ohci_hcd 0000:00:02.0: wakeup
    Feb 16 19:27:42 linux kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc0043162d]
    Feb 16 19:27:42 linux kernel: ohci_hcd 0000:00:02.1: wakeup
    Feb 16 19:27:42 linux kernel: usb 1-3: new low speed USB device using ohci_hcd and address 2
    Feb 16 19:27:42 linux kernel: usb 2-3: new full speed USB device using ohci_hcd and address 2
    Feb 16 19:27:42 linux kernel: NET: Registered protocol family 10
    Feb 16 19:27:42 linux kernel: Disabled Privacy Extensions on device c038aa20(lo)
    Feb 16 19:27:42 linux kernel: IPv6 over IPv4 tunneling driver
    Feb 16 19:27:42 linux kernel: ip6_tables: (C) 2000-2002 Netfilter core team
    Feb 16 19:27:42 linux kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Feb 16 19:27:42 linux kernel: ip_conntrack version 2.1 (8192 buckets, 65536 max) - 304 bytes per conntrack
    Feb 16 19:27:42 linux kernel: Initializing USB Mass Storage driver...
    Feb 16 19:27:42 linux kernel: scsi2 : SCSI emulation for USB Mass Storage devices
    Feb 16 19:27:42 linux kernel: usbcore: registered new driver usb-storage
    Feb 16 19:27:42 linux kernel: USB Mass Storage support registered.
    Feb 16 19:27:42 linux kernel: usb-storage: device found at 2
    Feb 16 19:27:42 linux kernel: usb-storage: waiting for device to settle before scanning
    Feb 16 19:27:42 linux kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
    Feb 16 19:27:42 linux kernel: usbcore: registered new driver usblp
    Feb 16 19:27:42 linux kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Feb 16 19:27:42 linux kernel: usbcore: registered new driver hiddev
    Feb 16 19:27:42 linux kernel: input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3
    Feb 16 19:27:42 linux kernel: usbcore: registered new driver usbhid
    Feb 16 19:27:42 linux kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    Feb 16 19:27:42 linux kernel: hdb: ATAPI 48X DVD-ROM drive, 512kB Cache
    Feb 16 19:27:42 linux kernel: Uniform CD-ROM driver Revision: 3.20
    Feb 16 19:27:42 linux kernel: hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Feb 16 19:27:42 linux kernel: st: Version 20041025, fixed bufsize 32768, s/g segs 256
    Feb 16 19:27:42 linux kernel: Vendor: OTi Model: CF CARD Reader Rev: 2.00
    Feb 16 19:27:42 linux kernel: Type: Direct-Access ANSI SCSI revision: 00
    Feb 16 19:27:42 linux kernel: Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
    Feb 16 19:27:42 linux kernel: Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
    Feb 16 19:27:42 linux kernel: Vendor: OTi Model: SM CARD Reader Rev: 2.00
    Feb 16 19:27:42 linux kernel: Type: Direct-Access ANSI SCSI revision: 00
    Feb 16 19:27:42 linux kernel: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1
    Feb 16 19:27:42 linux kernel: Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 1, type 0
    Feb 16 19:27:42 linux kernel: Vendor: OTi Model: SD CARD Reader Rev: 2.00
    Feb 16 19:27:42 linux kernel: Type: Direct-Access ANSI SCSI revision: 00
    Feb 16 19:27:42 linux kernel: Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 2
    Feb 16 19:27:42 linux kernel: Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 2, type 0
    Feb 16 19:27:42 linux kernel: Vendor: OTi Model: MS CARD Reader Rev: 2.00
    Feb 16 19:27:42 linux kernel: Type: Direct-Access ANSI SCSI revision: 00
    Feb 16 19:27:42 linux kernel: Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 3
    Feb 16 19:27:42 linux kernel: Attached scsi generic sg3 at scsi2, channel 0, id 0, lun 3, type 0
    Feb 16 19:27:42 linux kernel: usb-storage: device scan complete
    Feb 16 19:27:42 linux kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    Feb 16 19:27:42 linux kernel: Disabled Privacy Extensions on device f6fc9800(sit0)
    Feb 16 19:27:42 linux kernel: ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
    Feb 16 19:27:42 linux kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 201
    Feb 16 19:27:42 linux kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64
    Feb 16 19:27:42 linux kernel: intel8x0_measure_ac97_clock: measured 49481 usecs
    Feb 16 19:27:42 linux kernel: intel8x0: clocking to 47502
    Feb 16 19:27:43 linux /etc/dev.d/block/50-hwscan.dev[6698]: new block device /block/hdb
    Feb 16 19:27:43 linux /etc/dev.d/block/50-hwscan.dev[6703]: new block device /block/hdd
    Feb 16 19:27:44 linux /etc/dev.d/block/51-subfs.dev[6722]: mount block device /block/hdb
    Feb 16 19:27:44 linux kernel: ACPI: Power Button (FF) [PWRF]
    Feb 16 19:27:44 linux /etc/dev.d/block/51-subfs.dev[6739]: mount block device /block/hdd
    Feb 16 19:27:44 linux kernel: ACPI: Fan [FAN] (on)
    Feb 16 19:27:44 linux kernel: ACPI: Thermal Zone [THRM] (47 C)
    Feb 16 19:27:44 linux kernel: powernow-k8: Processor cpuid 681 not supported
    Feb 16 19:27:45 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
    Feb 16 19:27:45 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
    Feb 16 19:27:45 linux /etc/dev.d/block/50-hwscan.dev[7195]: new block device /block/sda
    Feb 16 19:27:45 linux /etc/dev.d/block/50-hwscan.dev[7245]: new block device /block/sdc
    Feb 16 19:27:45 linux /etc/dev.d/block/51-subfs.dev[7255]: mount block device /block/sdc
    Feb 16 19:27:45 linux /etc/dev.d/block/50-hwscan.dev[7342]: new block device /block/sdd
    Feb 16 19:27:45 linux /etc/dev.d/block/51-subfs.dev[7352]: mount block device /block/sdd
    Feb 16 19:27:45 linux /etc/dev.d/block/51-subfs.dev[7205]: mount block device /block/sda
    Feb 16 19:27:45 linux /etc/dev.d/block/50-hwscan.dev[7500]: new block device /block/sdb
    Feb 16 19:27:45 linux /etc/dev.d/block/51-subfs.dev[7510]: mount block device /block/sdb
    Feb 16 19:27:47 linux kernel: eth0: no IPv6 routers present
    Feb 16 19:27:47 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
    Feb 16 19:27:48 linux /sbin/hotplug[7841]: /etc/hotplug/firmware.agent: line 37: /sys//firmware/edd/loading: Permission denied
    Feb 16 19:27:48 linux /sbin/hotplug[7841]: /etc/hotplug/firmware.agent: line 38: /sys//firmware/edd/data: Permission denied
    Feb 16 19:27:48 linux /sbin/hotplug[7841]: /etc/hotplug/firmware.agent: line 39: /sys//firmware/edd/loading: Permission denied
    Feb 16 19:27:55 linux kernel: parport_pc: Ignoring new-style parameters in presence of obsolete ones
    Feb 16 19:27:55 linux kernel: parport: PnPBIOS parport detected.
    Feb 16 19:27:55 linux kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
    Feb 16 19:27:55 linux kernel: lp0: using parport0 (interrupt-driven).
    Feb 16 19:27:56 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
    Feb 16 19:27:56 linux kernel: usbcore: registered new driver usbserial_generic
    Feb 16 19:27:56 linux kernel: usbcore: registered new driver usbserial
    Feb 16 19:27:56 linux kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
    Feb 16 19:28:01 linux kernel: Non-volatile memory driver v1.2
    Feb 16 19:28:01 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 16 19:28:01 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 16 19:28:03 linux kdm: :0[9264]: pam_unix2: session started for user user, service xdm-np
    Feb 16 19:28:03 linux /usr/sbin/cron[9782]: (CRON) STARTUP (V5.0)
    Feb 16 19:28:03 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 16 19:28:04 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 16 19:31:03 linux su: FAILED SU (to root) user on /dev/pts/1
    Feb 16 19:31:10 linux su: FAILED SU (to root) user on /dev/pts/1
    Feb 16 19:31:24 linux su: (to root) user on /dev/pts/1
    Feb 16 19:31:24 linux su: pam_unix2: session started for user root, service su
    Feb 16 19:47:37 linux -- MARK --
    Feb 16 19:57:07 linux su: FAILED SU (to root) user on /dev/pts/4
    Feb 16 19:57:18 linux su: (to root) user on /dev/pts/4
    Feb 16 19:57:18 linux su: pam_unix2: session started for user root, service su
    Feb 16 19:57:18 linux su: pam_unix2: session finished for user root, service su
    Feb 16 19:57:18 linux su: (to root) user on /dev/pts/4
    Feb 16 19:57:18 linux su: pam_unix2: session started for user root, service su
    Feb 16 19:58:06 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 16 19:58:06 linux SuSEfirewall2: Firewall rules unloaded.
    Feb 16 19:58:07 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 16 19:58:07 linux SuSEfirewa
Zuletzt geändert von Chris29o am 20. Feb 2005, 15:28, insgesamt 1-mal geändert.

Werbung:
}-Tux-{
Moderator
Moderator
Beiträge: 696
Registriert: 12. Dez 2004, 19:54
Kontaktdaten:

Beitrag von }-Tux-{ » 18. Feb 2005, 23:11

Hi

was für ein prob hast du denn? hab jetzt keine lust mir den ganzen log anzuschauen...
poste einfach nur den relevanten teil wo der fehler ist und die voherigen und nachfolgenden 10 zeilen


Greets }-Tux-{

Chris29o
Newbie
Newbie
Beiträge: 4
Registriert: 18. Feb 2005, 21:32

Beitrag von Chris29o » 19. Feb 2005, 09:16

Hallo }-Tux-{,

danke das du dich so schnell gemeldet hast.

Ich habe noch mal nach geschaut, daß sind die sachen wo entweder ein fehler auftreten oder wo ich mir nicht sicher bin.
  • Feb 16 19:27:48 linux /sbin/hotplug[7841]: /etc/hotplug/firmware.agent: line 37: /sys//firmware/edd/loading: Permission denied
    Feb 16 19:27:48 linux /sbin/hotplug[7841]: /etc/hotplug/firmware.agent: line 38: /sys//firmware/edd/data: Permission denied
    Feb 16 19:27:48 linux /sbin/hotplug[7841]: /etc/hotplug/firmware.agent: line 39: /sys//firmware/edd/loading: Permission denied

    Was bedeutet das ?


    Feb 16 17:59:01 linux /usr/sbin/cron[7193]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
    Feb 16 18:20:32 linux -- MARK --
    Feb 16 18:40:32 linux -- MARK --
    Feb 16 18:59:01 linux /usr/sbin/cron[13540]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
    Feb 16 19:20:33 linux -- MARK --

    Was heißt das MARK ?


    Feb 16 19:27:37 linux syslogd 1.4.1: restart.
    Feb 16 19:27:37 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 16 19:27:38 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2
    Feb 16 19:27:41 linux sshd[6366]: Server listening on :: port 22.
    Feb 16 19:27:42 linux ifup: No configuration found for sit0

    Feb 16 19:27:45 linux rcpowersaved: enter 'POWERSAVE_CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.

    Feb 16 19:27:47 linux kernel: eth0: no IPv6 routers present

    Feb 16 19:28:01 linux kernel: Non-volatile memory driver v1.2
    Feb 16 19:28:01 linux kernel: end_request: I/O error, dev fd0, sector 0
    Feb 16 19:28:01 linux kernel: end_request: I/O error, dev fd0, sector 0


    Feb 16 19:28:03 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 16 19:28:04 linux SuSEfirewall2: Firewall rules successfully set from /etc/sysconfig/SuSEfirewall2


    Und hier bekomme ich immer eine FEHLER, aber wahr rum ?
    Feb 16 19:31:03 linux su: FAILED SU (to root) user on /dev/pts/1
    Feb 16 19:31:10 linux su: FAILED SU (to root) user on /dev/pts/1
    Feb 16 19:31:24 linux su: (to root) user on /dev/pts/1


    Feb 16 19:58:06 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 16 19:58:06 linux SuSEfirewall2: Firewall rules unloaded.
    Feb 16 19:58:07 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    Feb 16 19:58:07 linux SuSEfirewa
Und da sind bestümt noch ein paar fehler

Ich danke dir für deine Mühe

Mfg
Chris29o[/b]

}-Tux-{
Moderator
Moderator
Beiträge: 696
Registriert: 12. Dez 2004, 19:54
Kontaktdaten:

Beitrag von }-Tux-{ » 19. Feb 2005, 12:09

Feb 16 17:59:01 linux /usr/sbin/cron[7193]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Feb 16 18:20:32 linux -- MARK --
Feb 16 18:40:32 linux -- MARK --
Feb 16 18:59:01 linux /usr/sbin/cron[13540]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Feb 16 19:20:33 linux -- MARK --

Was heißt das MARK ?
Der syslogd schreibt diesen eintrag alle 20 Minuten (falls nichts anderes passiert ist). Im falle eines system absturzes oder ähnliches kannst du dann schauen wann der letze -- MARK -- geschrieben wurde...
Feb 16 19:27:37 linux syslogd 1.4.1: restart.
Feb 16 19:27:37 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
IPv6 wirst du normal eh nicht brauchen.... du kannst diese warnungen normal ignorieren
Feb 16 19:27:41 linux sshd[6366]: Server listening on :: port 22.
hier wurde der ssh-daemon gestartet
Feb 16 19:27:42 linux ifup: No configuration found for sit0
hast du vlt eine wlan karte? wenn ja ist diese nicht konfiguriert oder deaktiviert
Und hier bekomme ich immer eine FEHLER, aber wahr rum ?
Feb 16 19:31:03 linux su: FAILED SU (to root) user on /dev/pts/1
Feb 16 19:31:10 linux su: FAILED SU (to root) user on /dev/pts/1
Feb 16 19:31:24 linux su: (to root) user on /dev/pts/1
versuchst du dich evtl als root einzuloggen und gibst dabei ein falsches passwort ein?


Ich hoffe ich konnte dir ein wenig helfen.

Greets }-Tux-{

Chris29o
Newbie
Newbie
Beiträge: 4
Registriert: 18. Feb 2005, 21:32

Beitrag von Chris29o » 19. Feb 2005, 18:42

Hallo }-Tux-{,

danke du hast mir sehr geholfen.

Ich habe Suse noch mal gebootet und da stand noch was mit ( monut: fs tybe subfs not supported by Kernel failend )
Der Rechner boot zu schnell das man das alles genau lesen kann.

Das ist noch, mein einzigste sorge.

Mfg
Chris29o

Benutzeravatar
Gimpel
Guru
Guru
Beiträge: 1983
Registriert: 11. Feb 2004, 13:58
Wohnort: Mjunik .... "no a hoibe, resi!"
Kontaktdaten:

Beitrag von Gimpel » 19. Feb 2005, 18:46

siehe kernel-howto

subfs ist _nicht_ im vanilla kernel mit drin, daher entweder: raus damit aus der fstab, oder modul nachträglich bauen
Bild on AMD Athlon64 X2 5600+|64bit|6GB DDR2 800MHz|nVidia GF 8500GT|2.6.29-rc1-moo1|BTRFS|KDE-4.2 SVN trunk + Compiz++|M-Audio Audiophile 2496
----
Bild

Benutzeravatar
TeXpert
Guru
Guru
Beiträge: 2166
Registriert: 17. Jan 2005, 11:22

Beitrag von TeXpert » 19. Feb 2005, 19:26

Chris29o hat geschrieben: Der Rechner boot zu schnell das man das alles genau lesen kann.
bootlogd installieren und nach dem Boot sich in aller Ruhe das Bootprotokoll ansehen

Code: Alles auswählen

# to resolve all your problems, try this:
HOWTO='pack c5,41*2,sqrt 7056,unpack(c,H)-2,oct 115' && perl -le "print $HOWTO"
Ich beantworte keine Supportfragen per PM!

Benutzeravatar
framp
Moderator
Moderator
Beiträge: 4231
Registriert: 6. Jun 2004, 20:57
Wohnort: bei Stuttgart
Kontaktdaten:

Beitrag von framp » 19. Feb 2005, 19:53

Ich wuerde mal den Title korrigieren - sonst stehen bald Heerscharen von Deutschnachhilfelehrern bei Dir ;-)

Chris29o
Newbie
Newbie
Beiträge: 4
Registriert: 18. Feb 2005, 21:32

Beitrag von Chris29o » 20. Feb 2005, 15:43

Hallo Gimpel,

danke für die Antwort. Werde ich die tage mal versuchen. Habe wider eine streßige Woche vor mir.

Hallo TeXpert,

danke für den Tipp, werde ich auch gleich schnell ausprobieren.


Hallo framp

danke dir auch. Ich habe es korrigiert.

Mfg
Chris29o

Linfan
Newbie
Newbie
Beiträge: 2
Registriert: 3. Mär 2005, 21:41
Wohnort: NL

IPv6

Beitrag von Linfan » 3. Mär 2005, 21:58

Hallo Chris29o,

Versuch mahl im Yast, System, editor for /etc/sysconfig Bestande zu gehen.
Gehe dan in Network, Hardware, Config, es erscheint eine Liste.
Unten steht IPv6, schalte diese ab (= no oder nein)
Nach einen nachsten mahl booten werdest du dan weniger Fehlermeldungen haben.

Viel erfolg,

Hanno.

Linfan
Newbie
Newbie
Beiträge: 2
Registriert: 3. Mär 2005, 21:41
Wohnort: NL

Log

Beitrag von Linfan » 3. Mär 2005, 22:04

Hallo Chris29o,

Und gehe mal in /var/log herein, eventuell als Root.


Hanno.

Benutzeravatar
DataCreeper
Newbie
Newbie
Beiträge: 23
Registriert: 14. Mär 2005, 15:22
Kontaktdaten:

Re: Log

Beitrag von DataCreeper » 13. Apr 2005, 12:30

Linfan hat geschrieben:Hallo Chris29o,

Und gehe mal in /var/log herein, eventuell als Root.


Hanno.
....würd ich sofort ausprobieren... ((bei mir hast geholfen;-))
p.s. ||| || |super tipp!
Fight Vs Close Source !>)

Benutzeravatar
DataCreeper
Newbie
Newbie
Beiträge: 23
Registriert: 14. Mär 2005, 15:22
Kontaktdaten:

Beitrag von DataCreeper » 13. Apr 2005, 12:31

da hast du ja ein schwerwiegendes problem...
wennst eh noch nicht soweit bist, würd ich persönlich - formatieren!
:o :o :o
Fight Vs Close Source !>)

Antworten

Wer ist online?

Mitglieder in diesem Forum: Bing [Bot] und 2 Gäste