• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

CVScedega will nix installieren...

^kImBo^

Newbie
Jetzt wo ich es endlich geschafft habe CVScedega draufzubekommen jagt mich ein Problem nach dem andern.
Mein Cedega will nichts installieren, wenn ich es probier kommt das

kimbo@linux:~> cvscedega Documents/SteamInstall_CS.exe
err:module:BUILTIN32_dlopen failed to load .so lib for builtin x11drv.dll: /usr/lib/cvscedega/lib/l
ibx11drv.so: undefined symbol: dllname
Could not load graphics driver 'x11drv'
err:module:BUILTIN32_dlopen failed to load .so lib for builtin x11drv.dll: /usr/lib/cvscedega/lib/l
ibx11drv.so: undefined symbol: dllname
Could not load graphics driver 'x11drv'
wine: Unhandled exception, starting debugger...
err:seh:start_debugger Couldn't start debugger ("programs/winedbg/winedbg -- --auto 1 64") (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
err:ntdll:MODULE_THREAD_WaitThreadModuleSafe this should never happen. (unless wine crashed)

Meine Config sihet so aus

WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config

;; If you think it is nescessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive C]
"Path" = "/root/.cvscedega/c_drive"
"Type" = "hd"
"Label" = "Dos Drive"
"Filesystem" = "win95"

[Drive D]
"Path" = "/media/dvd"
"Type" = "dvd"
"Label" = "DVD-ROM"
"Filesystem" = "win95"
"Device" = "/dev/hdc"

[Drive E]
"Path" = "/tmp"
"Type" = "hd"
"Label" = "tmp"
"Filesystem" = "win95"

[Drive G]
"Path" = "/"
"Type" = "hd"
"Label" = "root"
"Filesystem" = "win95"

[wine]
"Windows" = "c:\\windows"
"System" = "c:\\windows\\system32\\"
"Temp" = "e:\\"
"Path" = "c:\\windows\\;c:\\windows\\system32\\"
"GraphicsDriver" = "x11drv"
; Wine doesn't pass directory symlinks to Windows programs by default.
; Enabling this may crash some programs that do recursive lookups of a whole
; subdir tree in case of a symlink pointing back to itself.
;"ShowDirSymlinks" = "1"
; Note: The WINESHELLLINK Environment variable will override this setting.
; (which is set in the winex startup script)
"ShellLinker" = "/usr/lib/transgaming/winex/bin/wineshelllink"
; Note: The WINEBROWSER Environment variable will override this setting.
; you may format the string by placing a %s where you want
; the URL to go, if its left off then the URL will be appended to the end.
; This option is used by the winelib app 'winebrowserlink'
"Browser" = "/usr/bin/mozilla %s"

# <wineconf>

[Version]
; This doesn't work in WineX, but its here for WineHQ compatability.
; can be (win95, win98, winme, nt351, nt40, win2k, winxp, win20, win30, win31)
"Windows" = "win98"
; dos version
;"DOS" = "6.22"

[DllDefaults]
"DefaultLoadOrder" = "native, builtin, so"

[DllOverrides]
"commdlg" = "builtin, native"
"comdlg32" = "builtin, native"
"ver" = "builtin, native"
"version" = "builtin, native"
"shell" = "builtin, native"
"shell32" = "builtin, native"
"shfolder" = "builtin, native"
"shlwapi" = "builtin, native"
"shdocvw" = "builtin, native"
"lzexpand" = "builtin, native"
"lz32" = "builtin, native"
"comctl32" = "builtin, native"
"commctrl" = "builtin, native"
"advapi32" = "builtin, native"
"crtdll" = "builtin, native"
"mpr" = "builtin, native"
"winspool.drv" = "builtin, native"
"d3d8" = "builtin, native"
"d3drm" = "builtin, native"
"ddraw" = "builtin, native"
"dinput" = "builtin, native"
"dinput8" = "builtin, native"
"dmusic" = "builtin, native"
"dsound" = "builtin, native"
"opengl32" = "builtin, native"
"msvcrt" = "native, builtin"
"rpcrt4" = "native, builtin"
"msvideo" = "builtin, native"
"msvfw32" = "builtin, native"
"mcicda.drv" = "builtin, native"
"mciseq.drv" = "builtin, native"
"mciwave.drv" = "builtin, native"
"mciavi.drv" = "native, builtin"
"mcianim.drv" = "native, builtin"
"msacm.drv" = "builtin, native"
"msacm" = "builtin, native"
"msacm32" = "builtin, native"
"midimap.drv" = "builtin, native"

[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Number of colors to copy from the default palette
"CopyDefaultColors" = "0"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 640x480 for Wine
;"Desktop" = "800x600"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "N"
; Use XShm extension if present
"UseXShm" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "Y"
; Code page used for captions in managed mode
; 0 means default ANSI code page (CP_ACP == 0)
"TextCP" = "0"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Use this to make your X server execute all commands
; sequentially rather than buffering commands. Will make
; everything really SLOW but can be nice for debugging.
;; "Synchronous" = "Y"
; This option controls the use of the X resize and rotate, XRandR, extension
; which provides fullscreen functionality in a manner similar to XVidMode.
; Note that if this option is enabled it will override UseXVidMode.
;; "UseXRandR" = "N"
; Enable the TransGaming HUD
;; "ShowFPS" = "Y"
; ShowFPS must be enabled for ShowMem to be enabled.
;; "ShowMem" = "Y"
; How much Video RAM does your graphic card have?
; If this option is not present, it will default set to 32MB.
"VideoRam" = "32"
; How much should WineX attempt to store into faster AGP memory
; Set the amount of video memory to be allocated for OpenGL vertex arrays.
; Normally the best choice is to leave it untouched or to set it to the
; half of your AGP aperture size -> dmesg | grep 'AGP aperture'
"AGPVertexRam" = "32"

[d3dgl]
"AnisotropicTextureFiltering" = "N"
"VertexShaders" = "Y"
"ClipSpaceFix" = "Y"

[fonts]
;Read documentation/fonts before adding aliases
"Resolution" = "96"
"Default" = "-adobe-times-"
"Freetype" = "N"

[FontPatterns]
"Pattern0" = "-adobe-times*"
"Pattern1" = "-adobe-helvetica*"
"Pattern2" = "-adobe-courier*"
"Pattern3" = "-misc-fixed*"

[FontDirs]
;"0"="/usr/X11/lib/X11/fonts/truetype/"

[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"

[parallelports]
"Lpt1" = "/dev/lp0"

[spooler]
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"
"LPT3:" = "/dev/lp3"

[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
; "write" = "0x779,0x379,0x280-0x2a0"

[spy]
"Exclude" = "WM_SIZE;WM_TIMER;"

[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "n"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "n"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"

[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
"WineLook" = "Win98"

[Console]
"Drivers" = "xterm"
;"Drivers" = "tty"
"XtermProg" = "konsole"
;"InitialRows" = "25"
;"InitialColumns" = "80"
;"TerminalType" = "nxterm"

[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"

; List of all directories directly contain .AFM files
[afmdirs]
;"1" = "/usr/share/ghostscript/fonts"
;"2" = "/usr/share/a2ps/afm"
;"3" = "/usr/share/enscript"
;"4" = "/usr/X11R6/lib/X11/fonts/Type1"

[Wineserver]
;; This option indicates if Cedega should accelerate
;; interprocess communication (AIC) between the client
;; and server.
"SHMWineserver" = "Y"

[WinMM]
"Drivers" = "winealsa.drv"
;"Drivers" = "wineoss.drv"
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"

[wineoss]
"UseMMap" = "N"
"FullDuplex" = "N"
;; Specify a mapping for what digital audio devices to use
;"dsp0" = "/dev/dsp0"
;"mixer0" = "/dev/mixer0"

[winealsa]
;; This option allows you to configure Cedega to write directly
;; to memory on the sound card rather than having to use the
;; slower route through the kernel.
"UseMMap" = "Y"
;; These options allow you to specify what ALSA sound devices
;; Cedega should use. Appropriate selection of these options
;; can allow you to select a secondary sound card or a plugin.
;"pcm0" = "hw"
;"ctl0" = "hw"

;; sample AppDefaults entries
;[AppDefaults\\iexplore.exe\\DllOverrides]
;"shlwapi" = "native"
;"rpcrt4" = "native"
;"ole32" = "native"
;"shdocvw" = "native"
;"wininet" = "native"
;"shfolder" = "native"
;"shell32" = "native"
;"shell" = "native"
;"comctl32" = "native"
;
;[AppDefaults\\setup.exe\\x11drv]
;"Desktop" = "800x600"

# </wineconf>

Kann mir vielleicht jemand helfen???
 

Homwer

Newbie
Moin

Ich gehe mal davon aus, das du Suse 9.1 benutzt.
Erstmal hast du gcc 3.3.3 ? erzeugt bei winex schlechten code, der nicht funtzt...

Also falls ja, runter damit und eine ältere Version drauf machen.
Bekommt man auf jedem Linux server nimm einfach ne rpm aus suse 9.0

Dann downloade dir mal Xfree86-devel...
dann wine noch mal confen und es sollte laufen.

Sag aber bitte mal bescheid weil ich habe im momment auch probs, wenn wine drauf ist, dann sagt er immer X11 drv could not start X

Gruß Homwer
 

Coolzero

Advanced Hacker
Hab genau das gleiche Problem, wollte jetzt gcc 3.2.2 instalieren, aber dann will er direkt wieder die aktuelle version instaliere, und wenn ich gcc 3.3.3 vorher löschen will, dann bestehen abhängigkeiten mit einigen programen, unteranderem kdelibs, hab bedenken ob mein system anschließend noch funzt
 

Misfit

Newbie
Mich würde das mit dem "Downgraden" auch mal interessieren. gcc geht noch relativ leicht weg, aber wenn ich 3.3.2 installieren will, passt cpp nicht und da hängen viel mehr und vor allem wichtigere Pakete dran...
 

Homwer

Newbie
Hi so weit ich weis brauchst du nur löschen und neu installieren also die ältere version, die abhängigkeiten kannst du einfach ausser acht lassen.
Gruß Homwer
 
Oben