Systemfehler KDE? hplip?

Visionflier · 20 Juni 2021

Hallo zusammen,

Seit einiger Zeit macht mein Leap 15.2 auf meinem Desktop-PC Probleme. Das ganze ging los, das KDE nicht mehr starten wollte. (Vermutlich ist mal beim Restore des Systemzustandes aus dem Ruhezustand was schief gelaufen). IceWM ging einwandfrei nur KDE nicht mehr. Nach einigen erfolglosen Recherchen und Suchen der Ursache habe ich das .config/ Verzeichnis umbenannt in .config.bad/ und seitdem startet zumindest KDE wieder. Allerdings krieg ich immer beim KDE-Start die Fehlermeldung:

Code:

2021-06-20T13:42:36.677270+02:00 localhost ksmserver[2146]: Qt: Session management error: networkIdsList argument is NULL
2021-06-20T13:42:38.030320+02:00 localhost /hp-systray: hp-systray[2190]: error: option -s not recognized
2021-06-20T13:42:40.408866+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1200, resource id: 14680069, major code: 18 (ChangeProperty), minor code: 0
2021-06-20T13:42:40.499274+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1214, resource id: 56623109, major code: 18 (ChangeProperty), minor code: 0
2021-06-20T13:42:41.342790+02:00 localhost dbus-daemon[1064]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.42" (uid=1000 pid=2321 comm="/usr/lib64/libexec/org_kde_powerdevil ") interface="org.freedesktop.login1.Manager" member="CanSuspendThenHibernate" error name="(unset)" requested_reply="0" destination="org.freedesktop.login1" (uid=0 pid=1100 comm="/usr/lib/systemd/systemd-logind ")
2021-06-20T13:42:44.066073+02:00 localhost /hp-upgrade: hp-upgrade[2367]: error: HPLIP upgrade is disabled by openSUSE for security reasons, see https://bugzilla.suse.com/show_bug.cgi?id=853405 - if you like to upgrade HPLIP, use an openSUSE software package manager like YaST or zypper.
2021-06-20T13:42:46.890379+02:00 localhost plasmashell[2172]: libkcups: CUPS-Get-Printers last error: 0 successful-ok
2021-06-20T13:42:46.895767+02:00 localhost plasmashell[2172]: libkcups: Create-Printer-Subscriptions last error: 0 successful-ok
2021-06-20T13:42:46.903484+02:00 localhost plasmashell[2172]: libkcups: Get-Jobs last error: 0 successful-ok
2021-06-20T13:42:46.909418+02:00 localhost plasmashell[2172]: libkcups: Get-Jobs last error: 0 successful-ok
2021-06-20T13:42:48.158234+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 2534, resource id: 8388644, major code: 18 (ChangeProperty), minor code: 0
2021-06-20T13:42:49.121673+02:00 localhost plasmashell[2172]: file:///usr/share/plasma/plasmoids/org.kde.plasma.systemloadviewer/contents/ui/SystemLoadViewer.qml:253: TypeError: Type error
2021-06-20T13:42:49.127978+02:00 localhost plasmashell[2172]: message repeated 12 times: [ file:///usr/share/plasma/plasmoids/org.kde.plasma.systemloadviewer/contents/ui/SystemLoadViewer.qml:253: TypeError: Type error]
2021-06-20T13:42:49.129768+02:00 localhost plasmashell[2172]: file:///usr/share/plasma/plasmoids/org.kde.plasma.systemloadviewer/contents/ui/SystemLoadViewer.qml:254: TypeError: Type error
2021-06-20T13:42:49.130738+02:00 localhost plasmashell[2172]: file:///usr/share/plasma/plasmoids/org.kde.plasma.systemloadviewer/contents/ui/SystemLoadViewer.qml:254: TypeError: Type error
2021-06-20T13:42:49.469834+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 3487, resource id: 33554742, major code: 3 (GetWindowAttributes), minor code: 0
2021-06-20T13:42:49.470193+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 9 (BadDrawable), sequence: 3488, resource id: 33554742, major code: 14 (GetGeometry), minor code: 0
2021-06-20T13:42:54.971891+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 5600, resource id: 37748850, major code: 20 (GetProperty), minor code: 0
2021-06-20T13:42:54.972315+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 5601, resource id: 37748850, major code: 15 (QueryTree), minor code: 0
2021-06-20T13:43:07.193920+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 7109, resource id: 79691781, major code: 18 (ChangeProperty), minor code: 0
2021-06-20T13:43:10.484885+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 9108, resource id: 37749286, major code: 15 (QueryTree), minor code: 0
2021-06-20T13:43:10.692254+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 9193, resource id: 37749320, major code: 18 (ChangeProperty), minor code: 0
2021-06-20T13:43:10.693568+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 9198, resource id: 37749321, major code: 18 (ChangeProperty), minor code: 0

Ich kann zwar momentan direkt keine Funktionseinschränkungen oder Fehlfunktionen feststellen, jedoch macht mich das trotzdem stutzig.
Komischerweise zeigt die hplip auch noch andere Fehler, obwohl die Drucker und der Scanner einwandfrei funktionieren.

Code:

robert@linux:~> hp-check
Saving output in log file: /home/robert/hp-check.log

HP Linux Imaging and Printing System (ver. 3.21.4)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.                                            
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.                                     
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).                                                                                                

Check types:                                                                                                                                                                                                                                              
a. EXTERNALDEP - External Dependencies                                                                                                                                                                                                                    
b. GENERALDEP - General Dependencies (required both at compile and run time)                                                                                                                                                                              
c. COMPILEDEP - Compile time Dependencies                                                                                                                                                                                                                 
d. [All are run-time checks]                                                                                                                                                                                                                              
PYEXT SCANCONF QUEUES PERMISSION                                                                                                                                                                                                                          

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

 
---------------
| SYSTEM INFO |
---------------

 Kernel: 5.3.18-lp152.66-default #1 SMP Tue Mar 2 13:18:19 UTC 2021 (73933a3) GNU/Linux
 Host: linux.fritz.box
 Proc: 5.3.18-lp152.66-default #1 SMP Tue Mar 2 13:18:19 UTC 2021 (73933a3) GNU/Linux
 Distribution: 3 15.2
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.21.4
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for suse distro  15.2 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.21.4

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
ppdbase=/usr/share/cups/model/manufacturer-PPDs
doc=/usr/share/doc/packages/hplip
html=/usr/share/doc/packages/hplip
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/lib/cups/driver
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=no
cups-ppd-install=yes
internal-tag=3.21.4
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no


Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory

Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[fax]
email_address = 
voice_phone = 

[installation]
date_time = 06/20/21 13:55:35
version = 3.21.4

[last_used]
device_uri = "hp:/net/HP_ColorLaserJet_M253-M254?ip=192.168.178.108"
printer_name = 
working_dir = .

[polling]
device_list = 
enable = false
interval = 5

[refresh]
enable = false
rate = 30
type = 1

[settings]
systray_messages = 0
systray_visible = 1

[upgrade]
last_upgraded_time = 1621803848
notify_upgrade = false
pending_upgrade_time = 0


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

-------------------------
| External Dependencies |
-------------------------

 cups                 CUPS - Common Unix Printing System                           REQUIRED        1.1             2.2.7           OK         'CUPS Scheduler is running'
 gs                   GhostScript - PostScript and PDF language interpreter and previewer REQUIRED        7.05            9.52            OK         -
 xsane                xsane - Graphical scanner frontend for SANE                  OPTIONAL        0.9             0.999           OK         -
 scanimage            scanimage - Shell scanning program                           OPTIONAL        1.0             1.0.32          OK         -
 error: dbus          DBus - Message bus system                                    REQUIRED        -               1.12.2          MISSING    'DBUS may not be installed or not running'
 policykit            PolicyKit - Administrative policy framework                  OPTIONAL        -               0.116           OK         -
 network              network -wget                                                OPTIONAL        -               1.20.3          OK         -
 error: avahi-utils   avahi-utils                                                  OPTIONAL        -               -               MISSING    'avahi-utils needs to be installed'

------------------------
| General Dependencies |
------------------------

 error: libjpeg       libjpeg - JPEG library                                       REQUIRED        -               -               MISSING    'libjpeg needs to be installed'
 error: cups-devel    CUPS devel- Common Unix Printing System development files    REQUIRED        -               2.2.7           MISSING    'cups-devel needs to be installed'
 error: cups-image    CUPS image - CUPS image development files                    REQUIRED        -               2.2.7           MISSING    'cups-image needs to be installed'
 error: libpthread    libpthread - POSIX threads library                           REQUIRED        -               b'2.26'         MISSING    'libpthread needs to be installed'
 error: libusb        libusb - USB library                                         REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
 sane                 SANE - Scanning library                                      REQUIRED        -               -               OK         -
 error: sane-devel    SANE - Scanning library development files                    REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
 error: libavahi-dev  libavahi-dev                                                 REQUIRED        -               -               MISSING    'libavahi-dev needs to be installed'
 error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED        5.0.9           5.7.3           MISSING    'libnetsnmp-devel needs to be installed'
 error: libcrypto     libcrypto - OpenSSL cryptographic library                    REQUIRED        -               1.1.1           MISSING    'libcrypto needs to be installed'
 python3X             Python 2.2 or greater - Python programming language          REQUIRED        2.2             3.6.12          OK         -
 error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL        -               -               MISSING    'python3-notify2 needs to be installed'
 error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4                         OPTIONAL        4.0             -               MISSING    'python3-pyqt4-dbus needs to be installed'
 error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)         REQUIRED        4.0             -               INCOMPAT   'python3-pyqt4 needs to be installed'
 python3-dbus         Python DBus - Python bindings for DBus                       REQUIRED        0.80.0          1.2.4           OK         -
 python3-xml          Python XML libraries                                         REQUIRED        -               2.2.5           OK         -
 error: python3-devel Python devel - Python development files                      REQUIRED        2.2             3.6.12          MISSING    'python3-devel needs to be installed'
 python3-pil          PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL        -               5.0.0           OK         -
 python3-reportlab    Reportlab - PDF library for Python                           OPTIONAL        2.0             3.4.0           OK         -

--------------
| COMPILEDEP |
--------------

 error: libtool       libtool - Library building support services                  REQUIRED        -               -               MISSING    'libtool needs to be installed'
 error: gcc           gcc - GNU Project C and C++ Compiler                         REQUIRED        -               -               MISSING    'gcc needs to be installed'
 make                 make - GNU make utility to maintain groups of programs       REQUIRED        3.0             4.2.1           OK         -

---------------------
| Python Extentions |
---------------------

 cupsext              CUPS-Extension                                               REQUIRED        -               3.21.4          OK         -
 hpmudext             IO-Extension                                                 REQUIRED        -               3.21.4          OK         -

----------------------
| Scan Configuration |
----------------------

 hpaio                HPLIP-SANE-Backend                                           REQUIRED        -               3.21.4          OK         'hpaio found in /etc/sane.d/dll.conf'
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext.
 error: scanext       Scan-SANE-Extension                                          REQUIRED        -               3.21.4          MISSING    'scanext needs to be installed'

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

No Scanner found.

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP_ColorLaserJet_M253-M254
--------------------------
Type: Printer
Device URI: hp:/net/HP_ColorLaserJet_M253-M254?ip=192.168.178.108
PPD: /etc/cups/ppd/HP_ColorLaserJet_M253-M254.ppd
warning: Failed to read /etc/cups/ppd/HP_ColorLaserJet_M253-M254.ppd ppd file
PPD Description: 
Printer status: Drucker HP_ColorLaserJet_M253-M254 ist im Leerlauf.  Aktiviert seit So 20 Jun 2021 13:10:26 CEST
Communication status: Good

samsung_SCX3205_USB
-------------------
Type: Unknown
Device URI: usb://Samsung/SCX-3200%20Series?serial=Z5EXBFEB602066R&interface=1
PPD: /etc/cups/ppd/samsung_SCX3205_USB.ppd
warning: Failed to read /etc/cups/ppd/samsung_SCX3205_USB.ppd ppd file
PPD Description: 
Printer status: Drucker samsung_SCX3205_USB ist im Leerlauf.  Aktiviert seit So 20 Jun 2021 12:34:23 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.


--------------
| PERMISSION |
--------------

 
-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
error: 'dbus-1-devel' package is missing/incompatible 
error: 'python-gobject2' package is missing/incompatible 
error: 'libjpeg-devel' package is missing/incompatible 
error: 'zlib-devel' package is missing/incompatible 
error: 'cups-devel' package is missing/incompatible 
error: 'cupsddk' package is missing/incompatible 
error: 'cups-devel' package is missing/incompatible 
error: 'glibc' package is missing/incompatible 
error: 'libusb-1_0-devel' package is missing/incompatible 
error: 'libusb-1_0-0' package is missing/incompatible 
error: 'sane-backends-devel' package is missing/incompatible 
error: 'libavahi-devel' package is missing/incompatible 
error: 'net-snmp-devel' package is missing/incompatible 
error: 'openssl' package is missing/incompatible 
error: 'python3-qt4' package is missing/incompatible 
error: 'python3-qt4-devel' package is missing/incompatible 
error: 'python3-devel' package is missing/incompatible 
error: 'libtool' package is missing/incompatible 
error: 'libgphoto2-devel' package is missing/incompatible 
error: 'rpm-build' package is missing/incompatible 
error: 'gcc-c++' package is missing/incompatible 

Missing Optional Dependencies
-----------------------------
error: 'avahi-utils' package is missing/incompatible 
error: 'python3-notify2' package is missing/incompatible 
error: 'dbus-1-python3-devel' package is missing/incompatible 
error: 'dbus-1-python3' package is missing/incompatible 

Total Errors: 18
Total Warnings: 1


Done.

18 Errors! :schockiert:

Die hplip-Installation zeigt mit YAST keine Abhängigkeitsfehler.
Die folgenden hplip-Pakete sind installiert:

Code:

robert@linux:~> zypper se -si hplip
Repository-Daten werden geladen...
Installierte Pakete werden gelesen...

S  | Name        | Type  | Version            | Arch   | Repository
---+-------------+-------+--------------------+--------+--------------------
i+ | hplip       | Paket | 3.21.4-lp152.235.1 | x86_64 | Printing Repository
i+ | hplip-hpijs | Paket | 3.21.4-lp152.235.1 | x86_64 | Printing Repository
i+ | hplip-sane  | Paket | 3.21.4-lp152.235.1 | x86_64 | Printing Repository

Was läuft hier falsch? Hat jemand eine Idee? :???:

Liebe Grüße
Visionflier

Sauerland · 20 Juni 2021

Nachinstallieren?
Sind aber viele nur für den Kompiliervorgang nötig.

hplip hat jetzt aber auch nichts mit den Fehlermeldungen von KDE zu tun.
Das updaten von hplip aus hplip ist deaktiviert

Igel1954 · 21 Juni 2021

Visionflier schrieb:
2021-06-20T13:42:48.158234+02:00 localhost kwin_x11[2163]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 2534, resource id: 8388644, major code: 18 (ChangeProperty), minor code: 0
[/code]

Die QXcbConnection Error Messages hab ich auch, die haben auch keine fühl- und sichtbaren Auswirkungen.

Visionflier schrieb:

Code:

robert@linux:~> hp-check
Saving output in log file: /home/robert/hp-check.log

HP Linux Imaging and Printing System (ver. 3.21.4)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.                                            
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.                                     
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).                                                                                                

.....


Total Errors: 18
Total Warnings: 1


Done.

18 Errors! :schockiert:

Den hp-check hast du wohl im Compile- und Run-Check-Mode laufen lassen. Dann sucht der natürlich auch alle Pakete, die man zum selber bauen (Compilieren) benötigen würde.

Ob hplip den angezeigten SAMSUNG-Drucker unterstützt? Da bin ich mir nicht sicher. Ich hab einen HP AOI im Netzwerk, hängt an der Fritz!Box, und bei mir läuft hplib problemlos auf mehreren Rechnern unter Leap 15.2 und GeckoLinux, sowie in einem testweise aufgesetzten LEAP15.3 in VBox.

Auf meinem PC sind für hplip folgende Pakete installiert:

Code:

igel01:~ # zypper se -si hplip sane ppd
Loading repository data...
Reading installed packages...

S  | Name                         | Type    | Version                      | Arch   | Repository
---+------------------------------+---------+------------------------------+--------+-------------------------
i+ | OpenPrintingPPDs             | package | 4.0.0.2-lp152.57.1           | noarch | Printing
i+ | OpenPrintingPPDs-ghostscript | package | 4.0.0.2-lp152.57.1           | noarch | Printing
i+ | OpenPrintingPPDs-hpijs       | package | 4.0.0.2-lp152.57.1           | noarch | Printing
i+ | OpenPrintingPPDs-postscript  | package | 4.0.0.2-lp152.57.1           | noarch | Printing
i+ | hplip                        | package | 3.21.4-lp152.235.1           | x86_64 | Printing
i+ | hplip-devel                  | package | 3.21.4-lp152.235.1           | x86_64 | Printing
i+ | hplip-hpijs                  | package | 3.21.4-lp152.235.1           | x86_64 | Printing
i+ | hplip-sane                   | package | 3.21.4-lp152.235.1           | x86_64 | Printing
i  | libKF5Sane5                  | package | 20.04.2-lp152.1.1            | x86_64 | openSUSE-15.2 OSS
i+ | libcupsppdc1                 | package | 2.2.7-lp152.9.9.1            | x86_64 | openSUSE-15.2 Update OSS
i  | libksane-lang                | package | 20.04.2-lp152.1.1            | noarch | openSUSE-15.2 OSS
i  | libzypp-plugin-appdata       | package | 1.0.1+git.20180426-lp152.4.2 | noarch | openSUSE-15.2 OSS
i+ | manufacturer-PPDs            | package | 10.2-lp152.539.1             | noarch | Printing
i  | python2-appdirs              | package | 1.4.3-lp152.3.2              | noarch | openSUSE-15.2 OSS
i  | python3-appdirs              | package | 1.4.3-lp152.3.2              | noarch | openSUSE-15.2 OSS
i  | sane-backends                | package | 1.0.32-lp152.7.6.1           | x86_64 | openSUSE-15.2 Update OSS
i  | sane-backends-autoconfig     | package | 1.0.32-lp152.7.6.1           | x86_64 | openSUSE-15.2 Update OSS
i+ | xsane                        | package | 0.999-lp152.3.8              | x86_64 | openSUSE-15.2 OSS


igel01:~ #

Das hplip-devel Paket hab ich wohl mal versehentlich mit ausgewählt, stört mich aber auch nicht.

Ein hp-check -r bringt bei mir nur 6 Fehler, die die Funktionsfähigkeit aber nicht einschränken:

Code:

Missing Required Dependencies
-----------------------------
error: 'libjpeg-devel' package is missing/incompatible 
error: 'zlib-devel' package is missing/incompatible 
error: 'sane-backends-devel' package is missing/incompatible 
error: 'libavahi-devel' package is missing/incompatible 
error: 'python3-qt4' package is missing/incompatible 
error: 'python3-qt4-devel' package is missing/incompatible 

Missing Optional Dependencies
-----------------------------
error: 'dbus-1-python3-devel' package is missing/incompatible 
error: 'dbus-1-python3' package is missing/incompatible 

Total Errors: 6
Total Warnings: 0

Visionflier · 21 Juni 2021

Hallo Sauerland, hallo Igel1954,

besten Dank für die schnellen Antworten.

Ein bisschen komisch ist das schon, dass Error-Meldungen keine Auswirkung haben sollen. Ich war immer der Meinung, die hatte ich vorher, also vor dem KDE-Crash, nicht gehabt.
Wozu sind denn die gut, wenn man sie eigentlich ignorieren kann?

hplip hat jetzt aber auch nichts mit den Fehlermeldungen von KDE zu tun.
Das updaten von hplip aus hplip ist deaktiviert

Nun ist doch hp-systray eine Datei, die mit hplip mitkommt ist. In der ~/.hplip/ befindet sich bei mir eine - allerdings leere - Datei hp-systray.lock.
Und die hplip wurde auch kürzlich ganz regulär über das Softwareupdatetool erneuert. Ich habe da auch schon vorher eine Refresh-Installation ohne Erfolg durchgeführt.
Jedenfalls konnte ich den Aufruf von hp-systray mit der Option -s nirgends finden.

Den hp-check hast du wohl im Compile- und Run-Check-Mode laufen lassen. Dann sucht der natürlich auch alle Pakete, die man zum selber bauen (Compilieren) benötigen würde.

Das hp-check-Kommando habe ich übrigens als normaler User ausgeführt. Und ob ich die "-r"-Option verwende oder nicht, ändert nichts an der Fehleranzahl oder Warning-Anzahl. Gut ist zumindest, dass die Drucker HP und Samsung einwandfrei funktionieren. Der Samsung ist ein Multifunktionsgerät SCR-3205 und läuft prima.

Das selbe Kommando für die Prüfung der Pakete ergibt bei mir:

Code:

robert@linux:~> sudo zypper se -si hplip sane ppd
[sudo] Passwort für root: 
Repository-Daten werden geladen...
Installierte Pakete werden gelesen...

S  | Name                     | Type  | Version                      | Arch   | Repository
---+--------------------------+-------+------------------------------+--------+--------------------------------
i+ | hplip                    | Paket | 3.21.4-lp152.235.1           | x86_64 | Printing Repository
i+ | hplip-hpijs              | Paket | 3.21.4-lp152.235.1           | x86_64 | Printing Repository
i+ | hplip-sane               | Paket | 3.21.4-lp152.235.1           | x86_64 | Printing Repository
i+ | libKF5Sane5              | Paket | 20.04.2-lp152.1.1            | x86_64 | Haupt-Repository
i  | libcupsppdc1             | Paket | 2.2.7-lp152.9.9.1            | x86_64 | Hauptaktualisierungs-Repository
i  | libksane-lang            | Paket | 20.04.2-lp152.1.1            | noarch | Haupt-Repository
i  | libzypp-plugin-appdata   | Paket | 1.0.1+git.20180426-lp152.4.2 | noarch | Haupt-Repository
i  | python3-appdirs          | Paket | 1.4.3-lp152.3.2              | noarch | Haupt-Repository
i+ | sane-backends            | Paket | 1.0.32-lp152.7.6.1           | x86_64 | Hauptaktualisierungs-Repository
i+ | sane-backends-autoconfig | Paket | 1.0.32-lp152.7.6.1           | x86_64 | Hauptaktualisierungs-Repository
i+ | xsane                    | Paket | 0.999-lp152.3.8              | x86_64 | Haupt-Repository

Ich werde das weiterhin beobachten, auch wenn ich ein leichtes mulmiges Gefühl dabei habe.
Denn ich war immer der Meinung, ein Opensuse-OS ist super stabil.

Mit freundlichem Gruß
Visionflier

Sauerland · 21 Juni 2021

Samsung Linux-Treiber werden von HP veröffentlicht.....
Allerdings nicht in hplip.....

Sauerland · 21 Juni 2021

Nur als Info:
Ich kann beim Bau eines rpm einige Abhängigkeiten mit einbauen, oder auch nicht....
Kommt ganz darauf an.....

Also noch einmal:
Trenne dich von den "Fehlern" (die keine sind) in hplip.........

Systemfehler KDE? hplip?

Visionflier

Member

Sauerland

Ultimate Guru

Igel1954

Member

Visionflier

Member

Sauerland

Ultimate Guru

Sauerland

Ultimate Guru