NVIDIA GeForce 6600 Go maximal 1024 x 768 [gelöst]

f.gruber · 22 Dez. 2014

Hallo,
habe auf ein älteres Notebook (Das Notebook ist ein Toshiba A80-154.) Suse 13.1 kopiert - also nicht wirklich installiert

Nach einigen Anpassungen funktioniert alles, aber: Es gelingt mir nicht über eine Auflösung von 1024 x 768 hinauszukommen.

Das Notebook hat eine NVIDIA GeForce 6600 Go Grafikkarte

Code:

hwinfo --gfx
22: PCI 100.0: 0300 VGA compatible controller (VGA) 
 [Created at pci.319] 
 Unique ID: VCu0.nWm+NyLd7+0 
 Parent ID: vSkL._Yb6Y2qgUH6 
 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 
 SysFS BusID: 0000:01:00.0 
 Hardware Class: graphics card 
 Model: "nVidia GeForce Go 6600 (0x0148)" 
 Vendor: pci 0x10de "nVidia Corporation" 
 Device: pci 0x0148 "GeForce Go 6600 (0x0148)" 
 SubVendor: pci 0x1179 "Toshiba America Info Systems" 
 SubDevice: pci 0xff00 
 Revision: 0xa2 
 Driver: "nvidia" 
 Driver Modules: "nvidia" 
 Memory Range: 0xa0000000-0xa3ffffff (rw,non-prefetchable) 
 Memory Range: 0xc0000000-0xc7ffffff (ro,non-prefetchable) 
 Memory Range: 0x90000000-0x90ffffff (rw,non-prefetchable) 
 Memory Range: 0xc8000000-0xc801ffff (ro,non-prefetchable,disabled) 
 IRQ: 16 (1639 events)
 I/O Ports: 0x3c0-0x3df (rw)
 Module Alias: "pci:v000010DEd00000148sv00001179sd0000FF00bc03sc00i00"
 Driver Info #0:
 XFree86 v4 Server Module: nv
 Driver Info #1:
 XFree86 v4 Server Module: nvidia
 3D Support: yes
 Config Status: cfg=new, avail=yes, need=no, active=unknown
 Attached to: #9 (PCI bridge)

Primary display adapter: #22

Der nouveau Treiber hat die Auflösung 1024 x 768 als höchste angezeigt. Daraufhin habe ich den proprietären NVIDIA Treiber installiert, auch dieser liefert max. 1024 x 768. Habe die Installation zuerst über die 1 Klick Methode aus dem Internet gemacht, da wurden die NVIDIA Treiber nvidia-gfxG03-kmp* installiert. Da es nichts gebracht hat, habe ich dann die Treiber der Serie nvidia-gfxG02-kmp* mit YAST installiert.

Code:

zypper se nvidia
Daten des Repositorys laden ...
Installierte Pakete lesen ...

S | Name                          | Zusammenfassung                                                      | Typ  
--+-------------------------------+----------------------------------------------------------------------+------
  | conky-feature-nvidia          | Pseudo Package for conky with nVidia Support                         | Paket
i | nvidia-computeG02             | NVIDIA driver for computing with GPGPU                               | Paket
  | nvidia-computeG03             | NVIDIA driver for computing with GPGPU                               | Paket
  | nvidia-gfxG01-kmp-default     | NVIDIA graphics driver kernel module for GeForceFX GPUs              | Paket
  | nvidia-gfxG01-kmp-desktop     | NVIDIA graphics driver kernel module for GeForceFX GPUs              | Paket
  | nvidia-gfxG01-kmp-pae         | NVIDIA graphics driver kernel module for GeForceFX GPUs              | Paket
i | nvidia-gfxG02-kmp-default     | NVIDIA graphics driver kernel module for GeForce 6xxx and newer GPUs | Paket
i | nvidia-gfxG02-kmp-desktop     | NVIDIA graphics driver kernel module for GeForce 6xxx and newer GPUs | Paket
  | nvidia-gfxG02-kmp-pae         | NVIDIA graphics driver kernel module for GeForce 6xxx and newer GPUs | Paket
  | nvidia-gfxG03-kmp-default     | NVIDIA graphics driver kernel module for GeForce 8xxx and newer GPUs | Paket
  | nvidia-gfxG03-kmp-desktop     | NVIDIA graphics driver kernel module for GeForce 8xxx and newer GPUs | Paket
  | nvidia-gfxG03-kmp-pae         | NVIDIA graphics driver kernel module for GeForce 8xxx and newer GPUs | Paket
  | nvidia-glG03                  | NVIDIA GL libraries for OpenGL acceleration                          | Paket
  | nvidia-texture-tools          | NVIDIA Texture Tools                                                 | Paket
  | nvidia-uvm-gfxG03-kmp-default | NVIDIA Unified Memory kernel module                                  | Paket
  | nvidia-uvm-gfxG03-kmp-desktop | NVIDIA Unified Memory kernel module                                  | Paket
  | nvidia-uvm-gfxG03-kmp-pae     | NVIDIA Unified Memory kernel module                                  | Paket
  | x11-video-nvidiaG01           | NVIDIA graphics driver for GeForceFX GPUs                            | Paket
i | x11-video-nvidiaG02           | NVIDIA graphics driver for GeForce 6xxx and newer GPUs               | Paket
  | x11-video-nvidiaG03           | NVIDIA graphics driver for GeForce 8xxx and newer GPUs               | Paket

Auch im Bootmanager kann ich maximal 1024 x 768 einstellen.
Ich will aber nicht glauben, dass die GPU nicht mehr kann.

Bin sehr dankbar für jeden Tipp.

towo · 22 Dez. 2014

Wie wäre es damit, uns /var/log/Xorg.0.log zu zeigen?

f.gruber · 22 Dez. 2014

Hier ist der Inhalt von /var/log/Xorg.0.log

Code:

[    34.913] X Protocol Version 11, Revision 0
[    34.913] Build Operating System: openSUSE SUSE LINUX
[    34.913] Current Operating System: Linux ToshibaA80-154.gruber 3.11.10-25-desktop #1 SMP PREEMPT Wed Dec 17 17:57:03 UTC 2014 (8210f77) i686
[    34.913] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-25-desktop root=UUID=5cb0eb44-e346-4667-b4bc-ce0d8ce4e5d7 resume=/dev/disk/by-id/ata-WDC_WD3200BEVT-00ZCT0_WD-WX80A8977633-part5 splash=silent quiet showopts
[    34.913] Build Date: 17 April 2014  05:36:11AM
[    34.913]  
[    34.913] Current version of pixman: 0.30.2
[    34.913]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    34.913] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    34.915] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 22 14:29:48 2014
[    34.916] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    34.916] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    34.916] (==) No Layout section.  Using the first Screen section.
[    34.916] (==) No screen section available. Using defaults.
[    34.916] (**) |-->Screen "Default Screen Section" (0)
[    34.916] (**) |   |-->Monitor "<default monitor>"
[    34.916] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    34.916] (==) Automatically adding devices
[    34.916] (==) Automatically enabling devices
[    34.916] (==) Automatically adding GPU devices
[    34.919] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    34.919]    Entry deleted from font path.
[    34.919] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[    34.919] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    34.919] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    34.919] (II) Loader magic: 0x8260620
[    34.919] (II) Module ABI versions:
[    34.919]    X.Org ANSI C Emulation: 0.4
[    34.919]    X.Org Video Driver: 14.1
[    34.919]    X.Org XInput driver : 19.1
[    34.919]    X.Org Server Extension : 7.0
[    34.919] (II) xfree86: Adding drm device (/dev/dri/card0)
[    34.925] (--) PCI:*(0:1:0:0) 10de:0148:1179:ff00 rev 162, Mem @ 0xa0000000/67108864, 0xc0000000/134217728, 0x90000000/16777216, BIOS @ 0x????????/131072
[    34.925] Initializing built-in extension Generic Event Extension
[    34.925] Initializing built-in extension SHAPE
[    34.925] Initializing built-in extension MIT-SHM
[    34.925] Initializing built-in extension XInputExtension
[    34.925] Initializing built-in extension XTEST
[    34.925] Initializing built-in extension BIG-REQUESTS
[    34.925] Initializing built-in extension SYNC
[    34.925] Initializing built-in extension XKEYBOARD
[    34.925] Initializing built-in extension XC-MISC
[    34.925] Initializing built-in extension SECURITY
[    34.925] Initializing built-in extension XINERAMA
[    34.925] Initializing built-in extension XFIXES
[    34.925] Initializing built-in extension RENDER
[    34.925] Initializing built-in extension RANDR
[    34.925] Initializing built-in extension COMPOSITE
[    34.925] Initializing built-in extension DAMAGE
[    34.925] Initializing built-in extension MIT-SCREEN-SAVER
[    34.925] Initializing built-in extension DOUBLE-BUFFER
[    34.925] Initializing built-in extension RECORD
[    34.925] Initializing built-in extension DPMS
[    34.925] Initializing built-in extension X-Resource
[    34.925] Initializing built-in extension XVideo
[    34.925] Initializing built-in extension XVideo-MotionCompensation
[    34.925] Initializing built-in extension XFree86-VidModeExtension
[    34.925] Initializing built-in extension XFree86-DGA
[    34.925] Initializing built-in extension XFree86-DRI
[    34.925] Initializing built-in extension DRI2
[    34.925] (II) LoadModule: "glx"
[    35.007] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[    41.494] (II) Module glx: vendor="NVIDIA Corporation"
[    41.494]    compiled for 4.0.2, module version = 1.0.0
[    41.494]    Module class: X.Org Server Extension
[    41.494] (II) NVIDIA GLX Module  304.125  Mon Dec  1 20:21:57 PST 2014
[    41.494] Loading extension GLX
[    41.494] (==) Matched nvidia as autoconfigured driver 0
[    41.495] (==) Matched nouveau as autoconfigured driver 1
[    41.495] (==) Matched nv as autoconfigured driver 2
[    41.495] (==) Matched nvidia as autoconfigured driver 3
[    41.495] (==) Matched nouveau as autoconfigured driver 4
[    41.495] (==) Matched nv as autoconfigured driver 5
[    41.495] (==) Matched modesetting as autoconfigured driver 6
[    41.495] (==) Matched fbdev as autoconfigured driver 7
[    41.495] (==) Matched vesa as autoconfigured driver 8
[    41.495] (==) Assigned the driver to the xf86ConfigLayout
[    41.495] (II) LoadModule: "nvidia"
[    41.495] (II) Loading /usr/lib/xorg/modules/updates/drivers/nvidia_drv.so
[    41.496] (II) Module nvidia: vendor="NVIDIA Corporation"
[    41.496]    compiled for 4.0.2, module version = 1.0.0
[    41.496]    Module class: X.Org Video Driver
[    41.496] (II) LoadModule: "nouveau"
[    41.549] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    41.549] (II) Module nouveau: vendor="X.Org Foundation"
[    41.549]    compiled for 1.14.3, module version = 1.0.9
[    41.549]    Module class: X.Org Video Driver
[    41.549]    ABI class: X.Org Video Driver, version 14.1
[    41.549] (II) LoadModule: "nv"
[    41.552] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[    41.552] (II) Module nv: vendor="X.Org Foundation"
[    41.552]    compiled for 1.14.3, module version = 2.1.20
[    41.552]    Module class: X.Org Video Driver
[    41.552]    ABI class: X.Org Video Driver, version 14.1
[    41.552] (II) LoadModule: "modesetting"
[    41.553] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    41.554] (II) Module modesetting: vendor="X.Org Foundation"
[    41.554]    compiled for 1.14.3.901, module version = 0.8.0
[    41.554]    Module class: X.Org Video Driver
[    41.554]    ABI class: X.Org Video Driver, version 14.1
[    41.554] (II) LoadModule: "fbdev"
[    41.555] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    41.555] (II) Module fbdev: vendor="X.Org Foundation"
[    41.556]    compiled for 1.14.3, module version = 0.4.3
[    41.556]    Module class: X.Org Video Driver
[    41.556]    ABI class: X.Org Video Driver, version 14.1
[    41.556] (II) LoadModule: "vesa"
[    41.557] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    41.557] (II) Module vesa: vendor="X.Org Foundation"
[    41.557]    compiled for 1.14.3, module version = 2.3.3
[    41.557]    Module class: X.Org Video Driver
[    41.558]    ABI class: X.Org Video Driver, version 14.1
[    41.558] (II) NVIDIA dlloader X Driver  304.125  Mon Dec  1 19:57:42 PST 2014
[    41.558] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    41.558] (II) NOUVEAU driver 
[    41.558] (II) NOUVEAU driver for NVIDIA chipset families :
[    41.558]    RIVA TNT        (NV04)
[    41.558]    RIVA TNT2       (NV05)
[    41.558]    GeForce 256     (NV10)
[    41.558]    GeForce 2       (NV11, NV15)
[    41.558]    GeForce 4MX     (NV17, NV18)
[    41.558]    GeForce 3       (NV20)
[    41.558]    GeForce 4Ti     (NV25, NV28)
[    41.558]    GeForce FX      (NV3x)
[    41.558]    GeForce 6       (NV4x)
[    41.558]    GeForce 7       (G7x)
[    41.558]    GeForce 8       (G8x)
[    41.558]    GeForce GTX 200 (NVA0)
[    41.558]    GeForce GTX 400 (NVC0)
[    41.558] (II) NOUVEAU driver 
[    41.558] (II) NOUVEAU driver for NVIDIA chipset families :
[    41.558]    RIVA TNT        (NV04)
[    41.558]    RIVA TNT2       (NV05)
[    41.559]    GeForce 256     (NV10)
[    41.559]    GeForce 2       (NV11, NV15)
[    41.559]    GeForce 4MX     (NV17, NV18)
[    41.559]    GeForce 3       (NV20)
[    41.559]    GeForce 4Ti     (NV25, NV28)
[    41.559]    GeForce FX      (NV3x)
[    41.559]    GeForce 6       (NV4x)
[    41.559]    GeForce 7       (G7x)
[    41.559]    GeForce 8       (G8x)
[    41.559]    GeForce GTX 200 (NVA0)
[    41.559]    GeForce GTX 400 (NVC0)
[    41.559] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    41.559] (II) FBDEV: driver for framebuffer: fbdev
[    41.559] (II) VESA: driver for VESA chipsets: vesa
[    41.559] (++) using VT number 7

[    41.559] (II) Loading sub module "fb"
[    41.559] (II) LoadModule: "fb"
[    41.560] (II) Loading /usr/lib/xorg/modules/libfb.so
[    41.560] (II) Module fb: vendor="X.Org Foundation"
[    41.560]    compiled for 1.14.3.901, module version = 1.0.0
[    41.560]    ABI class: X.Org ANSI C Emulation, version 0.4
[    41.560] (II) Loading sub module "wfb"
[    41.560] (II) LoadModule: "wfb"
[    41.561] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    41.561] (II) Module wfb: vendor="X.Org Foundation"
[    41.561]    compiled for 1.14.3.901, module version = 1.0.0
[    41.561]    ABI class: X.Org ANSI C Emulation, version 0.4
[    41.562] (II) Loading sub module "ramdac"
[    41.562] (II) LoadModule: "ramdac"
[    41.562] (II) Module "ramdac" already built-in
[    41.562] (WW) Falling back to old probe method for modesetting
[    41.562] (WW) Falling back to old probe method for fbdev
[    41.562] (II) Loading sub module "fbdevhw"
[    41.562] (II) LoadModule: "fbdevhw"
[    41.563] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    41.563] (II) Module fbdevhw: vendor="X.Org Foundation"
[    41.563]    compiled for 1.14.3.901, module version = 0.0.2
[    41.563]    ABI class: X.Org Video Driver, version 14.1
[    41.563] (WW) Falling back to old probe method for vesa
[    41.563] (II) NVIDIA(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    41.563] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    41.563] (==) NVIDIA(0): RGB weight 888
[    41.563] (==) NVIDIA(0): Default visual is TrueColor
[    41.563] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    41.563] (**) NVIDIA(0): Enabling 2D acceleration
[    42.741] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    42.741] (II) NVIDIA(GPU-0):     Vision stereo.
[    42.744] (II) NVIDIA(0): NVIDIA GPU GeForce Go 6600 (NV43) at PCI:1:0:0 (GPU-0)
[    42.744] (--) NVIDIA(0): Memory: 131072 kBytes
[    42.744] (--) NVIDIA(0): VideoBIOS: 05.43.02.56.04
[    42.744] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    42.744] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    42.744] (--) NVIDIA(0): Valid display device(s) on GeForce Go 6600 at PCI:1:0:0
[    42.744] (--) NVIDIA(0):     CRT-0
[    42.744] (--) NVIDIA(0):     TV-0
[    42.744] (--) NVIDIA(0):     Seiko/Epson (DFP-0) (connected)
[    42.744] (--) NVIDIA(0):     DFP-1
[    42.744] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    42.744] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    42.744] (--) NVIDIA(0): TV encoder: Unknown
[    42.744] (--) NVIDIA(0): Seiko/Epson (DFP-0): 310.0 MHz maximum pixel clock
[    42.744] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[    42.744] (--) NVIDIA(0): DFP-1: 155.0 MHz maximum pixel clock
[    42.744] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    42.744] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    42.744] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    42.744] (**) NVIDIA(0):     been enabled on all display devices.)
[    42.744] (==) NVIDIA(0): 
[    42.744] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    42.744] (==) NVIDIA(0):     will be used as the requested mode.
[    42.744] (==) NVIDIA(0): 
[    42.744] (II) NVIDIA(0): Validated MetaModes:
[    42.744] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    42.744] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[    42.745] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 768 +0 +0
[    42.745] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 768 +0 +0
[    42.745] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 576 +0 +96
[    42.746] (--) NVIDIA(0): DPI set to (83, 84); computed from "UseEdidDpi" X config
[    42.746] (--) NVIDIA(0):     option
[    42.746] (II) UnloadModule: "nouveau"
[    42.746] (II) Unloading nouveau
[    42.746] (II) UnloadModule: "nv"
[    42.746] (II) Unloading nv
[    42.746] (II) UnloadModule: "modesetting"
[    42.746] (II) Unloading modesetting
[    42.746] (II) UnloadModule: "fbdev"
[    42.746] (II) Unloading fbdev
[    42.746] (II) UnloadSubModule: "fbdevhw"
[    42.746] (II) Unloading fbdevhw
[    42.746] (II) UnloadModule: "vesa"
[    42.746] (II) Unloading vesa
[    42.746] (--) Depth 24 pixmap format is 32 bpp
[    42.760] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    44.193] Loading extension NV-GLX
[    44.216] (==) NVIDIA(0): Disabling shared memory pixmaps
[    44.216] (==) NVIDIA(0): Backing store disabled
[    44.216] (==) NVIDIA(0): Silken mouse enabled
[    44.217] (==) NVIDIA(0): DPMS enabled
[    44.217] Loading extension NV-CONTROL
[    44.217] Loading extension XINERAMA
[    44.217] (II) Loading sub module "dri2"
[    44.217] (II) LoadModule: "dri2"
[    44.217] (II) Module "dri2" already built-in
[    44.217] (II) NVIDIA(0): [DRI2] Setup complete
[    44.217] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    44.218] (--) RandR disabled
[    44.233] (II) Initializing extension GLX
[    44.401] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    44.401] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    44.401] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    44.401] (**) Power Button: Applying InputClass "LocalKeyboard"
[    44.401] (II) LoadModule: "evdev"
[    44.445] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    44.446] (II) Module evdev: vendor="X.Org Foundation"
[    44.446]    compiled for 1.14.3, module version = 2.8.2
[    44.446]    Module class: X.Org XInput Driver
[    44.446]    ABI class: X.Org XInput driver, version 19.1
[    44.446] (II) Using input driver 'evdev' for 'Power Button'
[    44.446] (**) Power Button: always reports core events
[    44.446] (**) evdev: Power Button: Device: "/dev/input/event6"
[    44.446] (--) evdev: Power Button: Vendor 0 Product 0x1
[    44.446] (--) evdev: Power Button: Found keys
[    44.446] (II) evdev: Power Button: Configuring as keyboard
[    44.446] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[    44.446] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    44.446] (**) Option "xkb_rules" "evdev"
[    44.446] (**) Option "xkb_model" "pc104"
[    44.446] (**) Option "xkb_layout" "de"
[    44.446] (**) Option "xkb_variant" "nodeadkeys"
[    44.487] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    44.487] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    44.487] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    44.487] (**) Video Bus: Applying InputClass "LocalKeyboard"
[    44.487] (II) Using input driver 'evdev' for 'Video Bus'
[    44.488] (**) Video Bus: always reports core events
[    44.488] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    44.488] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    44.488] (--) evdev: Video Bus: Found keys
[    44.488] (II) evdev: Video Bus: Configuring as keyboard
[    44.488] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[    44.488] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    44.488] (**) Option "xkb_rules" "evdev"
[    44.488] (**) Option "xkb_model" "pc104"
[    44.488] (**) Option "xkb_layout" "de"
[    44.488] (**) Option "xkb_variant" "nodeadkeys"
[    44.488] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    44.488] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    44.488] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    44.488] (**) Power Button: Applying InputClass "LocalKeyboard"
[    44.489] (II) Using input driver 'evdev' for 'Power Button'
[    44.489] (**) Power Button: always reports core events
[    44.489] (**) evdev: Power Button: Device: "/dev/input/event5"
[    44.489] (--) evdev: Power Button: Vendor 0 Product 0x1
[    44.489] (--) evdev: Power Button: Found keys
[    44.489] (II) evdev: Power Button: Configuring as keyboard
[    44.489] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[    44.489] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    44.489] (**) Option "xkb_rules" "evdev"
[    44.489] (**) Option "xkb_model" "pc104"
[    44.489] (**) Option "xkb_layout" "de"
[    44.489] (**) Option "xkb_variant" "nodeadkeys"
[    44.489] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    44.489] (II) No input driver specified, ignoring this device.
[    44.489] (II) This device may have been added with another device file.
[    44.490] (II) config/udev: Adding drm device (/dev/dri/card0)
[    44.490] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/event1)
[    44.490] (**) MosArt Optical Mouse: Applying InputClass "evdev pointer catchall"
[    44.490] (**) MosArt Optical Mouse: Applying InputClass "evdev pointer catchall"
[    44.490] (II) Using input driver 'evdev' for 'MosArt Optical Mouse'
[    44.490] (**) MosArt Optical Mouse: always reports core events
[    44.490] (**) evdev: MosArt Optical Mouse: Device: "/dev/input/event1"
[    44.490] (--) evdev: MosArt Optical Mouse: Vendor 0x62a Product 0x3
[    44.490] (--) evdev: MosArt Optical Mouse: Found 3 mouse buttons
[    44.490] (--) evdev: MosArt Optical Mouse: Found scroll wheel(s)
[    44.490] (--) evdev: MosArt Optical Mouse: Found relative axes
[    44.490] (--) evdev: MosArt Optical Mouse: Found x and y relative axes
[    44.490] (II) evdev: MosArt Optical Mouse: Configuring as mouse
[    44.490] (II) evdev: MosArt Optical Mouse: Adding scrollwheel support
[    44.490] (**) evdev: MosArt Optical Mouse: YAxisMapping: buttons 4 and 5
[    44.490] (**) evdev: MosArt Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    44.490] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1/event1"
[    44.490] (II) XINPUT: Adding extended input device "MosArt Optical Mouse" (type: MOUSE, id 9)
[    44.490] (II) evdev: MosArt Optical Mouse: initialized for relative axes.
[    44.491] (**) MosArt Optical Mouse: (accel) keeping acceleration scheme 1
[    44.491] (**) MosArt Optical Mouse: (accel) acceleration profile 0
[    44.491] (**) MosArt Optical Mouse: (accel) acceleration factor: 2.000
[    44.491] (**) MosArt Optical Mouse: (accel) acceleration threshold: 4
[    44.491] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/mouse0)
[    44.491] (II) No input driver specified, ignoring this device.
[    44.491] (II) This device may have been added with another device file.
[    44.491] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    44.491] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    44.491] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    44.491] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[    44.491] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    44.491] (**) AT Translated Set 2 keyboard: always reports core events
[    44.491] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    44.491] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    44.491] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    44.491] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    44.491] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    44.491] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    44.491] (**) Option "xkb_rules" "evdev"
[    44.492] (**) Option "xkb_model" "pc104"
[    44.492] (**) Option "xkb_layout" "de"
[    44.492] (**) Option "xkb_variant" "nodeadkeys"
[    44.492] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event2)
[    44.492] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    44.492] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    44.492] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[    44.492] (**) PS/2 Mouse: always reports core events
[    44.492] (**) evdev: PS/2 Mouse: Device: "/dev/input/event2"
[    44.492] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[    44.492] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[    44.492] (--) evdev: PS/2 Mouse: Found relative axes
[    44.492] (--) evdev: PS/2 Mouse: Found x and y relative axes
[    44.492] (II) evdev: PS/2 Mouse: Configuring as mouse
[    44.492] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    44.492] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    44.492] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input2/event2"
[    44.492] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 11)
[    44.493] (II) evdev: PS/2 Mouse: initialized for relative axes.
[    44.493] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    44.493] (**) PS/2 Mouse: (accel) acceleration profile 0
[    44.493] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    44.493] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    44.493] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)
[    44.493] (II) No input driver specified, ignoring this device.
[    44.493] (II) This device may have been added with another device file.
[    44.493] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event3)
[    44.493] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    44.493] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    44.493] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS GlidePoint'
[    44.493] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    44.493] (**) evdev: AlpsPS/2 ALPS GlidePoint: Device: "/dev/input/event3"
[    44.494] (--) evdev: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    44.494] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found 3 mouse buttons
[    44.494] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found absolute axes
[    44.494] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found x and y absolute axes
[    44.494] (--) evdev: AlpsPS/2 ALPS GlidePoint: Found absolute touchpad.
[    44.494] (II) evdev: AlpsPS/2 ALPS GlidePoint: Configuring as touchpad
[    44.494] (**) evdev: AlpsPS/2 ALPS GlidePoint: YAxisMapping: buttons 4 and 5
[    44.494] (**) evdev: AlpsPS/2 ALPS GlidePoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    44.494] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input3/event3"
[    44.494] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 12)
[    44.494] (II) evdev: AlpsPS/2 ALPS GlidePoint: initialized for absolute axes.
[    44.494] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    44.494] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0
[    44.494] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    44.494] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    44.494] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[    44.494] (II) No input driver specified, ignoring this device.
[    44.494] (II) This device may have been added with another device file.
[    44.495] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[    44.495] (II) No input driver specified, ignoring this device.
[    44.495] (II) This device may have been added with another device file.
[    61.444] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    61.444] (II) NVIDIA(GPU-0):     Vision stereo.
[    61.444] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    61.444] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    61.444] (**) NVIDIA(0):     been enabled on all display devices.)
[    63.525] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    63.525] (II) NVIDIA(GPU-0):     Vision stereo.
[    63.525] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    63.525] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    63.527] (**) NVIDIA(0):     been enabled on all display devices.)

mkossmann · 23 Dez. 2014

Was zeigt ein "xrandr -q" als verfügbare Auflösungen an ? Kannst du mit xrandr manuell eine andere Aufösung einstellen ?

In /var/log/Xorg.0.log findest du

Code:

[    42.744] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    42.744] (==) NVIDIA(0):     will be used as the requested mode.
[    42.744] (==) NVIDIA(0):
[    42.744] (II) NVIDIA(0): Validated MetaModes:
[    42.744] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    42.744] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768

Gibt es für diesen Mode (nvidia-auto-select) in der Xorg-Konfiguration ( in /etc/X11) Einträge oder hat da die Autokonfiguration zugeschlagen ?

Spielwurm · 23 Dez. 2014

Hast Du eigentlich nach der Installation des nvidia-Treibers ein

Code:

nvidia-xconfig

gemacht?

Spielwurm

th.giese · 24 Dez. 2014

Schon mal dran gedacht, dass das Disply des Notebooks der limitierende Faktor sein könnte?
Schaut Euch doch mal hier die techischen Daten an: http://www.toshiba.de/discontinued-products/satellite-a80-142/

Das Display gibt einfach nicht mehr her! Ich habe ein älteres Lenovo Thinkpad T60, gleiches "Probelm"

Frohes Fest

mkossmann · 24 Dez. 2014

Es gab jedenfalls Varianten mit 1400x1050 z.B http://www.chip.de/produkte/Toshiba-Satellite-A80-117_14812378.html.
Über Auflösung der -254 Variante ist aber leider nichts zu finden.

f.gruber · 24 Dez. 2014

mkossmann schrieb:
Was zeigt ein "xrandr -q" als verfügbare Auflösungen an ? ...

Das ist interessant: Wenn ich auf dem Rechner im Programm Konsole (KDE) xrandr -q aufrufe, bekomme ich

Code:

Screen 0: minimum 8 x 8, current 1024 x 768, maximum 4096 x 4096
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 304mm x 228mm
   1024x768       60.0*+
DVI-I-3 disconnected (normal left inverted right x axis y axis)

Wenn ich mich mit diesem Notebook per ssh -X verbinde, dann bekomme ich:

Code:

Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 8192 x 8192
DVI-I-1 connected primary 1600x1200+0+0 (normal left inverted right x axis y axis) 432mm x 324mm 
 1600x120060.0*+ 
 1280x102485.0 75.0 60.0 
 1280x960 85.0 
 1152x864 85.1 75.0
 1024x768 85.0 75.1 70.1 60.0
 832x62474.6 
 800x60085.1 72.2 75.0 60.3 56.2 
 640x48085.0 75.0 72.8 66.7 60.0 
 720x40070.1 
DVI-I-2 disconnected (normal left inverted right x axis y axis)

Verstehe ich nicht ganz, nehme aber an, dass diese Ausgabe die Werte des SSH Clients widergibt und nicht die Werte des Zielrechners = Notebook.

Gibt es für diesen Mode (nvidia-auto-select) in der Xorg-Konfiguration ( in /etc/X11) Einträge

Ich finde nirgendwo etwas

Code:

ToshibaA80-154:/etc/X11 # grep -r nvidia-auto-select *

Eine xorg.conf finde ich auch nicht.
Das finde ich:

Code:

ToshibaA80-154:/etc/X11 # cd xorg.conf.d/
ToshibaA80-154:/etc/X11/xorg.conf.d # dir
insgesamt 12
-rw-r--r-- 1 root root 1099 17. Apr 2014  10-evdev.conf
-rw-r--r-- 1 root root  509 28. Sep 2013  10-libvnc.conf
-rw-r--r-- 1 root root  141 21. Feb 2014  90-keytable.conf

oder hat da die Autokonfiguration zugeschlagen.

Wird wohl so sein :roll:

f.gruber · 24 Dez. 2014

Spielwurm schrieb:
Hast Du eigentlich nach der Installation des nvidia-Treibers ein

Code:

nvidia-xconfig

gemacht? ...

nvidia-xconfig habe ich bisher noch nie gebraucht .. :roll:
Habe dieses Programm aber jetzt ausgeführt. Es hat mit jetzt eine xorg.conf angelegt, wie ich sehe. Hat aber nichts gebracht.
Das ist die Ausgabe von nvidia-xconfig:

Code:

nvidia-xconfig
WARNING: Unable to locate/open X configuration file.

Package xorg-server was not found in the pkg-config search path.
Perhaps you should add the directory containing `xorg-server.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xorg-server' found
New X configuration file written to '/etc/X11/xorg.conf'

Und die neue xorg.conf

Code:

cat xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:version 304.125(buildmeister@swio-display-x86-rhel47-08)Mon Dec1 21:14:12 PST 2014


Section "ServerLayout"
Identifier "Layout0"
Screen0"Screen0" 0 0
InputDevice"Keyboard0" "CoreKeyboard"
InputDevice"Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName"Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor"Monitor0"
DefaultDepth24
SubSection "Display"
Depth 24
EndSubSection
EndSection

f.gruber · 24 Dez. 2014

th.giese schrieb:
Schon mal dran gedacht, dass das Display des Notebooks der limitierende Faktor sein könnte?
Das Display gibt einfach nicht mehr her! Ich habe ein älteres Lenovo Thinkpad T60, gleiches "Probelm"
Frohes Fest

Mit Puppy Linux Live CD kann ich problemlos eine Auflösung von z.B. 1280 x 1024 einstellen.
Aber die Live CD von Suse 13.1 hat auch ihre Schwierigkeiten. Der Bootvorgang dauert ewig und dann gibt es Bildstörungen, so dass man eigentlich nicht arbeiten kann.
Komisch, mit Puppy Linux funktioniert es meistens mit der Grafik, warum gibt es gerade bei Suse da immer Schwierigkeiten?

Sauerland · 24 Dez. 2014

Lösche die xorg.conf wieder, die hat bei mir immer Probleme bereitet ist ist eigentlich auch überflüssig.

Hast Du es mal mit dem Nvidia-Tool versucht?
Als root:

Code:

nvidia-settings

Und danach die Finger von dem KDE-Tool kscreen lassen..........

Hast Du das Teil mit einem VGA-DVI Adapter am laufen?

f.gruber · 25 Dez. 2014

Sauerland schrieb:
Hast Du es mal mit dem Nvidia-Tool versucht?

das Tool nvidia-settings sagt mir, dass es nur die Auflösung 1024 x 768 gibt.
Ich stelle mir halt die Frage, warum ich mit Puppy Linux eine höhere Auflösung einstellen kann?

Code:

Hast Du das Teil mit einem VGA-DVI Adapter am laufen?

Es ist ein Notebook und es geht mir nur um die Anzeige am Display.

f.gruber · 25 Dez. 2014

f.gruber schrieb:
Ich stelle mir halt die Frage, warum ich mit Puppy Linux eine höhere Auflösung einstellen kann?

Das war ein Irrtum meinerseits: Ich kann mit dem Xorg Wizard von Puppy zwar eine höhere Auflösung auswählen aber die Grafik fällt dann automatisch zurück in den 1024 x 768 Modus, was mir nicht gleich aufgefallen ist.

Tut mir leid für die Aufregung. Die Grafik bzw. das Display von dem Toshiba A80-154 kann offensichtlich wirklich nur 1024 x 768. :???:

Ich sollte vielleicht noch erwähnen, dass das Display nicht original ist. Ich habe dieses Display ausgetauscht durch einens von einem anderen Notebook. Nicht genau das gleiche Modell aber fast

. Vielleicht liegt es daran?

f.gruber · 25 Dez. 2014

mkossmann schrieb:
Über Auflösung der -254 Variante ist aber leider nichts zu finden.

Tut mir leid, da ist mir im Vorweihnachtsstress ein Schreibfehler passiert, das Notebook ist ein Toshiba A80-154. :irre:

Ich habe es oben ausgebessert.

th.giese · 26 Dez. 2014

f.gruber schrieb:
f.gruber schrieb:

Ich stelle mir halt die Frage, warum ich mit Puppy Linux eine höhere Auflösung einstellen kann?

Zum Vergrößern anklicken....

Das war ein Irrtum meinerseits: Ich kann mit dem Xorg Wizard von Puppy zwar eine höhere Auflösung auswählen aber die Grafik fällt dann automatisch zurück in den 1024 x 768 Modus, was mir nicht gleich aufgefallen ist.

Tut mir leid für die Aufregung. Die Grafik bzw. das Display von dem Toshiba A80-154 kann offensichtlich wirklich nur 1024 x 768. :???:

Ich sollte vielleicht noch erwähnen, dass das Display nicht original ist. Ich habe dieses Display ausgetauscht durch einens von einem anderen Notebook. Nicht genau das gleiche Modell aber fast . Vielleicht liegt es daran?

Zumindest das Originaldisplay des Toshiba A80-154 kann mehr, siehe heir: http://www.toshiba.de/discontinued-products/satellite-a80-154/
Wenn ein Austausch erfolgt ist, kann es natürlich sein, dass Du eins mit geringerer Auflösung erwischt hast.

Ich verstehe aber trotzdem die ganze Aufregung nicht. Auflösungen von > 1024X768 lassen auf einem 15" TFT alles so klein werden, dass man nur mit Not was erkennt. Das geht zumindest mir so, kann aber auch meinem Alter liegen

tomm.fa · 26 Dez. 2014

f.gruber schrieb:
Hallo,
habe auf ein älteres Notebook (Das Notebook ist ein Toshiba A80-154.) Suse 13.1 kopiert - also nicht wirklich installiert

Bedeutet genau was?
Dann ist da noch:

f.gruber schrieb:
Nach einigen Anpassungen funktioniert alles, aber: Es gelingt mir nicht über eine Auflösung von 1024 x 768 hinauszukommen.

Das Notebook hat eine NVIDIA GeForce 6600 Go Grafikkarte

Der nouveau Treiber hat die Auflösung 1024 x 768 als höchste angezeigt. Daraufhin habe ich den proprietären NVIDIA Treiber installiert, auch dieser liefert max. 1024 x 768. Habe die Installation zuerst über die 1 Klick Methode aus dem Internet gemacht, da wurden die NVIDIA Treiber nvidia-gfxG03-kmp* installiert. Da es nichts gebracht hat, habe ich dann die Treiber der Serie nvidia-gfxG02-kmp* mit YAST installiert.

Code:

zypper se nvidia Daten des Repositorys laden ... Installierte Pakete lesen ... S | Name | Zusammenfassung | Typ --+-------------------------------+----------------------------------------------------------------------+------ i | nvidia-computeG02 | NVIDIA driver for computing with GPGPU | Paket i | nvidia-gfxG02-kmp-default | NVIDIA graphics driver kernel module for GeForce 6xxx and newer GPUs | Paket i | nvidia-gfxG02-kmp-desktop | NVIDIA graphics driver kernel module for GeForce 6xxx and newer GPUs | Paket i | x11-video-nvidiaG02 | NVIDIA graphics driver for GeForce 6xxx and newer GPUs | Paket

Zum fett markierten: * steht für was; für welchen Kernel; welcher Kernel wird verwendet; welche Pakete wurden dazu noch installiert?
Zur Ausgabe von zypper se, was fällt auf?

NVIDIA GeForce 6600 Go maximal 1024 x 768 [gelöst]

f.gruber

Hacker

towo

Moderator

f.gruber

Hacker

mkossmann

Member

Spielwurm

Advanced Hacker

th.giese

Hacker

mkossmann

Member

f.gruber

Hacker

f.gruber

Hacker

f.gruber

Hacker

Sauerland

Ultimate Guru

f.gruber

Hacker

f.gruber

Hacker

f.gruber

Hacker

th.giese

Hacker

tomm.fa

Administrator