Heinz-Peter
Guru
Hallo,
nach Installation von Suse 13.2 kann ich mit der Tastenkombination Strg+Alt+F1 in die Textkonsole wechseln aber eine Anmeldung ist nicht möglich. Es läuft hier dir ganze Zeit eine Fehlermeldung über ein USB Bus.
Kann man so eine Meldung irgendwie beenden?
EDIT: Bei der Installation habe ich die Grub2 Kernel Parameter in der Zeile:
Hier noch zum Vergleich die Datei /boot/grub2/grub.cfg
Was steht bei euch hier nach splash= ?
Viele Grüße
Heinz-Peter
nach Installation von Suse 13.2 kann ich mit der Tastenkombination Strg+Alt+F1 in die Textkonsole wechseln aber eine Anmeldung ist nicht möglich. Es läuft hier dir ganze Zeit eine Fehlermeldung über ein USB Bus.
Kann man so eine Meldung irgendwie beenden?
EDIT: Bei der Installation habe ich die Grub2 Kernel Parameter in der Zeile:
splash=silent geändert auf splash=verbose und den Eintrag quiet entfernt. Kann hier der Fehler liegen?
Hier noch zum Vergleich die Datei /boot/grub2/grub.cfg
Was steht bei euch hier nach splash= ?
Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub2-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -f ${config_directory}/grubenv ]; then
load_env -f ${config_directory}/grubenv
elif [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="${saved_entry}"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos9' --hint-bios=hd0,msdos9 --hint-efi=hd0,msdos9 --hint-baremetal=ahci0,msdos9 --hint='hd0,msdos9' f8e2318c-36f5-401b-bdc5-28f147210d73
else
search --no-floppy --fs-uuid --set=root f8e2318c-36f5-401b-bdc5-28f147210d73
fi
font="/usr/share/grub2/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=de_DE
insmod gettext
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos9' --hint-bios=hd0,msdos9 --hint-efi=hd0,msdos9 --hint-baremetal=ahci0,msdos9 --hint='hd0,msdos9' f8e2318c-36f5-401b-bdc5-28f147210d73
else
search --no-floppy --fs-uuid --set=root f8e2318c-36f5-401b-bdc5-28f147210d73
fi
insmod gfxmenu
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans-Bold14.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans10.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans12.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/ascii.pf2
insmod png
set theme=($root)/boot/grub2/themes/openSUSE/theme.txt
export theme
if [ x${boot_once} = xtrue ]; then
set timeout=0
elif [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=8
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=8
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'openSUSE' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f8e2318c-36f5-401b-bdc5-28f147210d73' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos9' --hint-bios=hd0,msdos9 --hint-efi=hd0,msdos9 --hint-baremetal=ahci0,msdos9 --hint='hd0,msdos9' f8e2318c-36f5-401b-bdc5-28f147210d73
else
search --no-floppy --fs-uuid --set=root f8e2318c-36f5-401b-bdc5-28f147210d73
fi
echo 'Loading Linux 3.16.6-2-default ...'
linux /boot/vmlinuz-3.16.6-2-default root=UUID=f8e2318c-36f5-401b-bdc5-28f147210d73 resume=/dev/disk/by-id/ata-WDC_WD2500JS-00NCB1_WD-WCANK8579745-part7 splash=verbose showopts
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.16.6-2-default
}
submenu 'Advanced options for openSUSE' $menuentry_id_option 'gnulinux-advanced-f8e2318c-36f5-401b-bdc5-28f147210d73' {
menuentry 'openSUSE, with Linux 3.16.6-2-default' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.6-2-default-advanced-f8e2318c-36f5-401b-bdc5-28f147210d73' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos9' --hint-bios=hd0,msdos9 --hint-efi=hd0,msdos9 --hint-baremetal=ahci0,msdos9 --hint='hd0,msdos9' f8e2318c-36f5-401b-bdc5-28f147210d73
else
search --no-floppy --fs-uuid --set=root f8e2318c-36f5-401b-bdc5-28f147210d73
fi
echo 'Loading Linux 3.16.6-2-default ...'
linux /boot/vmlinuz-3.16.6-2-default root=UUID=f8e2318c-36f5-401b-bdc5-28f147210d73 resume=/dev/disk/by-id/ata-WDC_WD2500JS-00NCB1_WD-WCANK8579745-part7 splash=verbose showopts
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.16.6-2-default
}
menuentry 'openSUSE, with Linux 3.16.6-2-default (recovery mode)' --class opensuse --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.6-2-default-recovery-f8e2318c-36f5-401b-bdc5-28f147210d73' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos9' --hint-bios=hd0,msdos9 --hint-efi=hd0,msdos9 --hint-baremetal=ahci0,msdos9 --hint='hd0,msdos9' f8e2318c-36f5-401b-bdc5-28f147210d73
else
search --no-floppy --fs-uuid --set=root f8e2318c-36f5-401b-bdc5-28f147210d73
fi
echo 'Loading Linux 3.16.6-2-default ...'
linux /boot/vmlinuz-3.16.6-2-default root=UUID=f8e2318c-36f5-401b-bdc5-28f147210d73 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Loading initial ramdisk ...'
initrd /boot/initrd-3.16.6-2-default
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-F2D4FACAD4FA9059' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos1' --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 --hint='hd0,msdos1' F2D4FACAD4FA9059
else
search --no-floppy --fs-uuid --set=root F2D4FACAD4FA9059
fi
chainloader +1
}
menuentry 'openSUSE 13.1 (i586) (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-bae64527-eb47-45f0-821f-99937994ffe1' {
insmod part_msdos
insmod ext2
set root='hd0,msdos8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos8' --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8 --hint='hd0,msdos8' bae64527-eb47-45f0-821f-99937994ffe1
else
search --no-floppy --fs-uuid --set=root bae64527-eb47-45f0-821f-99937994ffe1
fi
linux /boot/vmlinuz-3.11.10-21-default root=/dev/disk/by-id/ata-WDC_WD2500JS-00NCB1_WD-WCANK8579745-part8 resume=/dev/disk/by-id/ata-WDC_WD2500JS-00NCB1_WD-WCANK8579745-part7 splash=verbose showopts vga=0x317
initrd /boot/initrd-3.11.10-21-default
}
submenu 'Advanced options for openSUSE 13.1 (i586) (on /dev/sda8)' $menuentry_id_option 'osprober-gnulinux-advanced-bae64527-eb47-45f0-821f-99937994ffe1' {
menuentry 'openSUSE - 3.11.10-21 (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.11.10-21-default--bae64527-eb47-45f0-821f-99937994ffe1' {
insmod part_msdos
insmod ext2
set root='hd0,msdos8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos8' --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8 --hint='hd0,msdos8' bae64527-eb47-45f0-821f-99937994ffe1
else
search --no-floppy --fs-uuid --set=root bae64527-eb47-45f0-821f-99937994ffe1
fi
linux /boot/vmlinuz-3.11.10-21-default root=/dev/disk/by-id/ata-WDC_WD2500JS-00NCB1_WD-WCANK8579745-part8 resume=/dev/disk/by-id/ata-WDC_WD2500JS-00NCB1_WD-WCANK8579745-part7 splash=verbose showopts vga=0x317
initrd /boot/initrd-3.11.10-21-default
}
menuentry 'Failsafe -- openSUSE - 3.11.10-21 (on /dev/sda8)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.11.10-21-default--bae64527-eb47-45f0-821f-99937994ffe1' {
insmod part_msdos
insmod ext2
set root='hd0,msdos8'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos8' --hint-bios=hd0,msdos8 --hint-efi=hd0,msdos8 --hint-baremetal=ahci0,msdos8 --hint='hd0,msdos8' bae64527-eb47-45f0-821f-99937994ffe1
else
search --no-floppy --fs-uuid --set=root bae64527-eb47-45f0-821f-99937994ffe1
fi
linux /boot/vmlinuz-3.11.10-21-default root=/dev/disk/by-id/ata-WDC_WD2500JS-00NCB1_WD-WCANK8579745-part8 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
initrd /boot/initrd-3.11.10-21-default
}
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/80_suse_btrfs_snapshot ###
### END /etc/grub.d/80_suse_btrfs_snapshot ###
### BEGIN /etc/grub.d/90_persistent ###
### END /etc/grub.d/90_persistent ###Viele Grüße
Heinz-Peter
