Ghoul
Member
Hallo alle zusammen!
Ich hoffe ihr seid auch alle Gut ins neue Jahr gekommen.
Jetzt mein Problem:
Ich versuche hier jetzt schon seid ein paar Tagen ein Software Raid1 mit Suse12.1 aufzusetzen
Läuft auch alles soweit, nur wenn ich dann zum Test eine der Platten abklemme Startet das System nicht mehr.
Erst meckert fsck das der Superblock nicht OK ist und als folge wird dann die root Partition nicht gemountet.
Ich weiß nicht was ich machen soll. Hier mal die Systemausgaben:
Wenn das System Läuft
dmesg (die Ausgabe war zu lang darum habe ich den Anfang gelöscht)
/proc/mdstat
mdadm --detail /dev/md[01]
Wenn ich eine Platte abgezogen habe
dmesg
mdadm --detail /dev/md[01] (hat erst eine ausgabe gegeben nachdem ich mit "mdadm -R /dev/md0 das Raid gestartet habe)
/proc/mdstat
Noch ein paar info zum System
Suse 12.1 netz installation
Mainboard ist ein Asus P8H67-M der SATA controller ist auf SATA mode (oder so ähnlich jedenfalls nicht raid eingestellt)
eingebaut sind 2 x1TB festplatten (Samsung und Hitachi)
aufgeteilt in 2 Primäre Partitionen nach Zylinder Partitioniert einmal ca.8GB für / , md0 sda1, sdb1 und ca. 800MB für /swap md1 sda2, sdb2, der Rest ist leer
(habe ich so gemacht damit das Synchronisieren nicht ewig dauert )
Grub habe ich so installiert wie hier im HowTo beschrieben. Das klappt auch mit dem Starten alles Soweit.
Ach ja Arbeiten soll das System als File Server.
Vielleicht kann mir ja jemand helfen das das System auch nach einem Plattenausfall hochfährt.
Es geht darum das ich keine Zeit habe wenn das System ausfällt sofort hinzufahren und es wieder zum laufen zu bringen
Wenn es gar nicht anders geht mache ich nur den File Teil als Raid und installiere das System auf beiden Platten,
so das ich vielleicht per Fernzugriff das System mit den Dateien auf einer Platte wieder zum laufen bringen kann.
edit: Wenn ich das Raid mit einer Platte von Hand gestartet habe, Startet das System auch wieder bis zum Ende, mit einer Platte.
Ich hoffe ihr seid auch alle Gut ins neue Jahr gekommen.
Jetzt mein Problem:
Ich versuche hier jetzt schon seid ein paar Tagen ein Software Raid1 mit Suse12.1 aufzusetzen
Läuft auch alles soweit, nur wenn ich dann zum Test eine der Platten abklemme Startet das System nicht mehr.
Erst meckert fsck das der Superblock nicht OK ist und als folge wird dann die root Partition nicht gemountet.
Ich weiß nicht was ich machen soll. Hier mal die Systemausgaben:
Wenn das System Läuft
dmesg (die Ausgabe war zu lang darum habe ich den Anfang gelöscht)
Code:
[ 2.241313] md: bind<sda1>
[ 2.242131] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
[ 2.242322] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[ 2.247323] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 2.247772] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input3
[ 2.248063] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[ 2.251929] md: bind<sdb1>
[ 2.254014] md: raid1 personality registered for level 1
[ 2.254175] bio: create slab <bio-1> at 1
[ 2.254927] md/raid1:md0: active with 2 out of 2 mirrors
[ 2.255185] created bitmap (1 pages) for device md0
[ 2.255432] md0: bitmap initialized from disk: read 1/1 pages, set 0 of 123 bits
[ 2.276160] md0: detected capacity change from 0 to 8232357888
[ 2.277188] md0: unknown partition table
[ 2.285887] fbcon: inteldrmfb (fb0) is primary device
[ 2.321240] usb 2-1.8: new high speed USB device number 4 using ehci_hcd
[ 2.411038] usb 2-1.8: New USB device found, idVendor=0951, idProduct=1624
[ 2.411040] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.411042] usb 2-1.8: Product: DataTraveler G2
[ 2.411043] usb 2-1.8: Manufacturer: Kingston
[ 2.411044] usb 2-1.8: SerialNumber: 001D0F0C7365EA51500000D3
[ 2.411357] scsi6 : usb-storage 2-1.8:1.0
[ 2.444862] Console: switching to colour frame buffer device 128x48
[ 2.446294] fb0: inteldrmfb frame buffer device
[ 2.446309] drm: registered panic notifier
[ 2.447111] fixme: max PWM is zero.
[ 2.447221] acpi device:37: registered as cooling_device4
[ 2.447370] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 2.447431] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.447466] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.527137] md: raid0 personality registered for level 0
[ 2.528813] md: raid10 personality registered for level 10
[ 2.529634] async_tx: api initialized (async)
[ 2.529862] xor: automatically using best checksumming function: generic_sse
[ 2.534645] generic_sse: 14188.000 MB/sec
[ 2.534661] xor: using function: generic_sse (14188.000 MB/sec)
[ 2.552653] raid6: int64x1 3101 MB/s
[ 2.569572] raid6: int64x2 3738 MB/s
[ 2.586537] raid6: int64x4 3433 MB/s
[ 2.603513] raid6: int64x8 2750 MB/s
[ 2.620455] raid6: sse2x1 8574 MB/s
[ 2.637422] raid6: sse2x2 10664 MB/s
[ 2.654383] raid6: sse2x4 12222 MB/s
[ 2.655027] raid6: using algorithm sse2x4 (12222 MB/s)
[ 2.656283] md: raid6 personality registered for level 6
[ 2.656942] md: raid5 personality registered for level 5
[ 2.657569] md: raid4 personality registered for level 4
[ 2.971697] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.104030] EXT4-fs (md0): re-mounted. Opts: acl,user_xattr
[ 3.409964] scsi 6:0:0:0: Direct-Access Kingston DataTraveler G2 PMAP PQ: 0 ANSI: 0 CCS
[ 3.411574] sd 6:0:0:0: [sdc] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 3.414442] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.415146] sd 6:0:0:0: [sdc] Mode Sense: 03 41 00 00
[ 3.417434] sd 6:0:0:0: [sdc] No Caching mode page present
[ 3.418046] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.425171] sd 6:0:0:0: [sdc] No Caching mode page present
[ 3.425780] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.427418] sdc: sdc1
[ 3.433772] sd 6:0:0:0: [sdc] No Caching mode page present
[ 3.434436] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.435086] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.626308] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 3.873993] systemd[1]: Set hostname to <linux-n01c.site>.
[ 5.407010] udevd[388]: starting version 173
[ 6.510314] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.511016] mei 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.511455] mei 0000:00:16.0: setting latency timer to 64
[ 6.548090] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 6.548588] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 6.549047] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.551706] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.613290] wmi: Mapper loaded
[ 6.614116] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.631060] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.671264] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.671800] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 6.671821] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.697467] asus_wmi: ASUS WMI generic driver loaded
[ 6.709366] iTCO_vendor_support: vendor-support=0
[ 6.710998] asus_wmi: Initialization: 0x0
[ 6.711029] asus_wmi: BIOS WMI version: 0.9
[ 6.711559] asus_wmi: SFUN value: 0x0
[ 6.712239] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[ 6.713806] asus_wmi: Backlight controlled by ACPI video driver
[ 6.718298] parport_pc 00:03: reported by Plug and Play ACPI
[ 6.719057] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.719196] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 6.720513] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.721161] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.836153] ppdev: user-space parallel port driver
[ 7.087576] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.088173] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.088771] r8169 0000:05:00.0: setting latency timer to 64
[ 7.088832] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
[ 7.089067] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900057ae000, 14:da:e9:95:b7:fe, XID 0c200000 IRQ 47
[ 7.089651] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.090245] r8169 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 7.090875] r8169 0000:07:00.0: (unregistered net_device): not PCI Express
[ 7.091708] r8169 0000:07:00.0: eth1: RTL8169sb/8110sb at 0xffffc900057b6000, 00:e0:52:f7:70:2f, XID 10000000 IRQ 19
[ 7.216686] ALSA patch_realtek.c:1214 SKU: Nid=0x1d sku_cfg=0x4004c601
[ 7.216688] ALSA patch_realtek.c:1216 SKU: port_connectivity=0x1
[ 7.216690] ALSA patch_realtek.c:1217 SKU: enable_pcbeep=0x0
[ 7.216691] ALSA patch_realtek.c:1218 SKU: check_sum=0x00000004
[ 7.216692] ALSA patch_realtek.c:1219 SKU: customization=0x000000c6
[ 7.216693] ALSA patch_realtek.c:1220 SKU: external_amp=0x0
[ 7.216694] ALSA patch_realtek.c:1221 SKU: platform_type=0x0
[ 7.216696] ALSA patch_realtek.c:1222 SKU: swap=0x0
[ 7.216697] ALSA patch_realtek.c:1223 SKU: override=0x1
[ 7.216863] hda_codec: ALC887-VD: BIOS auto-probing.
[ 7.217503] ALSA hda_codec.c:4877 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.217505] ALSA hda_codec.c:4881 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.217506] ALSA hda_codec.c:4885 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.217507] ALSA hda_codec.c:4886 mono: mono_out=0x0
[ 7.217508] ALSA hda_codec.c:4889 dig-out=0x11/0x1e
[ 7.217509] ALSA hda_codec.c:4890 inputs:
[ 7.217511] ALSA hda_codec.c:4894 Rear Mic=0x18
[ 7.217512] ALSA hda_codec.c:4894 Front Mic=0x19
[ 7.217513] ALSA hda_codec.c:4894 Line=0x1a
[ 7.217514] ALSA hda_codec.c:4896
[ 7.219607] ALSA patch_realtek.c:1277 realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
[ 7.219609] ALSA patch_realtek.c:1293 realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0887
[ 7.465873] ifup[675]: Service network not started and mode 'auto' -> skipping
[ 7.466770] ifup[676]: Service network not started and mode 'auto' -> skipping
[ 7.555550] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.559842] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.560578] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.351309] md: bind<sdb2>
[ 9.462346] device-mapper: uevent: version 1.0.3
[ 9.463140] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 9.926840] md: bind<sda2>
[ 10.650919] md/raid1:md1: active with 2 out of 2 mirrors
[ 10.964128] created bitmap (1 pages) for device md1
[ 11.126177] md1: bitmap initialized from disk: read 1/1 pages, set 0 of 13 bits
[ 11.206075] md1: detected capacity change from 0 to 823119872
[ 11.215036] md1: unknown partition table
[ 11.312131] Adding 803824k swap on /dev/md1. Priority:0 extents:1 across:803824k
[ 12.780822] EXT4-fs (md0): re-mounted. Opts: acl,user_xattr
[ 12.954410] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x17
[ 12.985395] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x17
[ 12.987030] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x17
[ 12.988784] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x17
[ 12.991643] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 13.011497] microcode: CPU0 updated to revision 0x1b, date = 2011-07-14
[ 13.012791] microcode: CPU1 updated to revision 0x1b, date = 2011-07-14
[ 13.013839] microcode: CPU2 updated to revision 0x1b, date = 2011-07-14
[ 13.014866] microcode: CPU3 updated to revision 0x1b, date = 2011-07-14
[ 13.175675] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.179529] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 13.182123] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.205327] SuSEfirewall2[870]: Firewall rules set to CLOSE.
[ 13.807063] systemd[1]: NetworkManager.service: control process exited, code=exited status=1
[ 13.821808] systemd[1]: Job NetworkManager-wait-online.service/start failed with result 'dependency'.
[ 13.822720] systemd[1]: Unit NetworkManager.service entered failed state.
[ 14.514075] r8169 0000:05:00.0: eth0: link down
[ 14.514081] r8169 0000:05:00.0: eth0: link down
[ 14.514558] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.521806] NET: Registered protocol family 17
[ 19.205074] r8169 0000:05:00.0: eth0: link up
[ 19.205754] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.663906] EXT4-fs (md0): re-mounted. Opts: acl,user_xattr,commit=0
[ 29.296009] eth0: no IPv6 routers present
[ 97.021223] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
Code:
Personalities : [raid1] [raid0] [raid10] [raid6] [raid5] [raid4]
md1 : active (auto-read-only) raid1 sda2[0] sdb2[1]
803828 blocks super 1.0 [2/2] [UU]
bitmap: 0/1 pages [0KB], 65536KB chunk
md0 : active raid1 sdb1[1] sda1[0]
8039412 blocks super 1.0 [2/2] [UU]
bitmap: 0/1 pages [0KB], 65536KB chunk
unused devices: <none>
Code:
/dev/md0:
Version : 1.0
Creation Time : Tue Jan 3 20:11:33 2012
Raid Level : raid1
Array Size : 8039412 (7.67 GiB 8.23 GB)
Used Dev Size : 8039412 (7.67 GiB 8.23 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Intent Bitmap : Internal
Update Time : Tue Jan 10 21:40:57 2012
State : active
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : 192.168.0.93:0
UUID : 193efb29:6a4c6d62:60270e88:4343e66f
Events : 702
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 8 17 1 active sync /dev/sdb1
/dev/md1:
Version : 1.0
Creation Time : Tue Jan 3 22:13:13 2012
Raid Level : raid1
Array Size : 803828 (785.12 MiB 823.12 MB)
Used Dev Size : 803828 (785.12 MiB 823.12 MB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Intent Bitmap : Internal
Update Time : Mon Jan 9 21:36:27 2012
State : active
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : linux-n01c:1 (local to host linux-n01c)
UUID : 9de271b6:cbecd527:43240217:02506e2c
Events : 25
Number Major Minor RaidDevice State
0 8 2 0 active sync /dev/sda2
1 8 18 1 active sync /dev/sdb2Wenn ich eine Platte abgezogen habe
dmesg
Code:
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fa00000 s78208 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s78208 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042435
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8091452k/9435136k available (5791k kernel code, 1136380k absent, 207304k reserved, 7776k data, 940k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3193.036 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.07 BogoMIPS (lpj=3193036)
[ 0.000134] pid_max: default: 32768 minimum: 301
[ 0.000226] Security Framework initialized
[ 0.000300] AppArmor: AppArmor initialized
[ 0.000897] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002948] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003888] Mount-cache hash table entries: 256
[ 0.004031] Initializing cgroup subsys cpuacct
[ 0.004097] Initializing cgroup subsys memory
[ 0.004174] Initializing cgroup subsys devices
[ 0.004239] Initializing cgroup subsys freezer
[ 0.004304] Initializing cgroup subsys net_cls
[ 0.004369] Initializing cgroup subsys blkio
[ 0.004436] Initializing cgroup subsys perf_event
[ 0.004530] CPU: Physical Processor ID: 0
[ 0.004594] CPU: Processor Core ID: 0
[ 0.004659] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.004660] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.004794] mce: CPU supports 7 MCE banks
[ 0.004867] CPU0: Thermal monitoring enabled (TM1)
[ 0.004938] using mwait in idle threads.
[ 0.005755] ACPI: Core revision 20110623
[ 0.009663] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019711] CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz stepping 07
[ 0.121206] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.121405] ... version: 3
[ 0.121468] ... bit width: 48
[ 0.121532] ... generic registers: 4
[ 0.121596] ... value mask: 0000ffffffffffff
[ 0.121662] ... max period: 000000007fffffff
[ 0.121728] ... fixed-purpose events: 3
[ 0.121791] ... event mask: 000000070000000f
[ 0.129524] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.137186] Booting Node 0, Processors #1
[ 0.137278] smpboot cpu 1: start_ip = 99000
[ 0.228071] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.233969] #2
[ 0.234012] smpboot cpu 2: start_ip = 99000
[ 0.324833] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.330752] #3 Ok.
[ 0.330829] smpboot cpu 3: start_ip = 99000
[ 0.421667] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.423524] Brought up 4 CPUs
[ 0.423598] Total of 4 processors activated (25542.68 BogoMIPS).
[ 0.425586] devtmpfs: initialized
[ 0.426291] PM: Registering ACPI NVS region at bad32000 (360448 bytes)
[ 0.426368] PM: Registering ACPI NVS region at badaa000 (69632 bytes)
[ 0.426438] PM: Registering ACPI NVS region at badd1000 (4096 bytes)
[ 0.426505] PM: Registering ACPI NVS region at badda000 (40960 bytes)
[ 0.426576] PM: Registering ACPI NVS region at bae3e000 (274432 bytes)
[ 0.426737] print_constraints: dummy:
[ 0.426828] RTC time: 20:49:49, date: 01/10/12
[ 0.426921] NET: Registered protocol family 16
[ 0.427103] ACPI: bus type pci registered
[ 0.427205] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.427300] PCI: not using MMCONFIG
[ 0.427364] PCI: Using configuration type 1 for base access
[ 0.428050] bio: create slab <bio-0> at 0
[ 0.428173] ACPI: Added _OSI(Module Device)
[ 0.428238] ACPI: Added _OSI(Processor Device)
[ 0.428303] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.428368] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.429907] ACPI: EC: Look up EC in DSDT
[ 0.431122] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.433633] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 0.433834] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349)
[ 0.434234] ACPI: SSDT 00000000baddac18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.434716] ACPI: Dynamic OEM Table Load:
[ 0.434850] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.435034] ACPI: SSDT 00000000baddbe18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.435448] ACPI: Dynamic OEM Table Load:
[ 0.435584] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.436271] ACPI: Interpreter enabled
[ 0.436337] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.436594] ACPI: Using IOAPIC for interrupt routing
[ 0.436676] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.436829] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.445754] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.450867] ACPI: No dock devices found.
[ 0.450932] HEST: Table not found.
[ 0.450996] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.451278] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.451561] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.451629] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.451698] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.451790] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[ 0.451882] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xffffffff]
[ 0.451976] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cd7ff])
[ 0.452082] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[ 0.452107] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.452125] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.452127] pci 0000:00:01.0: PME# disabled
[ 0.452141] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300
[ 0.452148] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.452153] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.452156] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.452196] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.452216] pci 0000:00:16.0: reg 10: [mem 0xfe607000-0xfe60700f 64bit]
[ 0.452271] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.452274] pci 0000:00:16.0: PME# disabled
[ 0.452301] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.452320] pci 0000:00:1a.0: reg 10: [mem 0xfe606000-0xfe6063ff]
[ 0.452385] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.452388] pci 0000:00:1a.0: PME# disabled
[ 0.452409] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.452422] pci 0000:00:1b.0: reg 10: [mem 0xfe600000-0xfe603fff 64bit]
[ 0.452472] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.452475] pci 0000:00:1b.0: PME# disabled
[ 0.452493] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.452549] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.452551] pci 0000:00:1c.0: PME# disabled
[ 0.452575] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 0.452630] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.452633] pci 0000:00:1c.4: PME# disabled
[ 0.452653] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 0.452708] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.452711] pci 0000:00:1c.5: PME# disabled
[ 0.452731] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
[ 0.452787] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.452790] pci 0000:00:1c.6: PME# disabled
[ 0.452810] pci 0000:00:1c.7: [8086:244e] type 1 class 0x000604
[ 0.452865] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.452868] pci 0000:00:1c.7: PME# disabled
[ 0.452891] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.452910] pci 0000:00:1d.0: reg 10: [mem 0xfe605000-0xfe6053ff]
[ 0.452976] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.452979] pci 0000:00:1d.0: PME# disabled
[ 0.452999] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601
[ 0.453099] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
[ 0.453112] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
[ 0.453119] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
[ 0.453125] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
[ 0.453132] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
[ 0.453138] pci 0000:00:1f.2: reg 20: [io 0xf0d0-0xf0df]
[ 0.453145] pci 0000:00:1f.2: reg 24: [io 0xf0c0-0xf0cf]
[ 0.453177] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.453189] pci 0000:00:1f.3: reg 10: [mem 0xfe604000-0xfe6040ff 64bit]
[ 0.453208] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.453235] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
[ 0.453248] pci 0000:00:1f.5: reg 10: [io 0xf0b0-0xf0b7]
[ 0.453254] pci 0000:00:1f.5: reg 14: [io 0xf0a0-0xf0a3]
[ 0.453261] pci 0000:00:1f.5: reg 18: [io 0xf090-0xf097]
[ 0.453267] pci 0000:00:1f.5: reg 1c: [io 0xf080-0xf083]
[ 0.453274] pci 0000:00:1f.5: reg 20: [io 0xf070-0xf07f]
[ 0.453280] pci 0000:00:1f.5: reg 24: [io 0xf060-0xf06f]
[ 0.453322] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.453428] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.453563] pci 0000:03:00.0: [1106:0415] type 0 class 0x000101
[ 0.453582] pci 0000:03:00.0: reg 10: [io 0xe040-0xe047]
[ 0.453595] pci 0000:03:00.0: reg 14: [io 0xe030-0xe033]
[ 0.453608] pci 0000:03:00.0: reg 18: [io 0xe020-0xe027]
[ 0.453621] pci 0000:03:00.0: reg 1c: [io 0xe010-0xe013]
[ 0.453634] pci 0000:03:00.0: reg 20: [io 0xe000-0xe00f]
[ 0.453659] pci 0000:03:00.0: reg 30: [mem 0xfe500000-0xfe50ffff pref]
[ 0.453697] pci 0000:03:00.0: supports D1 D2
[ 0.453699] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.453703] pci 0000:03:00.0: PME# disabled
[ 0.455466] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.455551] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.455554] pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.455598] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.455731] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.455749] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.455781] pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.455800] pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.455856] pci 0000:05:00.0: supports D1 D2
[ 0.455857] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.455862] pci 0000:05:00.0: PME# disabled
[ 0.457460] pci 0000:00:1c.6: PCI bridge to [bus 05-05]
[ 0.457544] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.457551] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.457605] pci 0000:06:00.0: [1b21:1080] type 1 class 0x000604
[ 0.457703] pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.457774] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.457777] pci 0000:00:1c.7: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.457782] pci 0000:00:1c.7: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.457784] pci 0000:00:1c.7: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.457785] pci 0000:00:1c.7: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.457787] pci 0000:00:1c.7: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 0.457841] pci 0000:07:00.0: [10ec:8169] type 0 class 0x000200
[ 0.457870] pci 0000:07:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.457886] pci 0000:07:00.0: reg 14: [mem 0xfe420000-0xfe4200ff]
[ 0.457961] pci 0000:07:00.0: reg 30: [mem 0xfe400000-0xfe41ffff pref]
[ 0.457993] pci 0000:07:00.0: supports D1 D2
[ 0.457994] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.457999] pci 0000:07:00.0: PME# disabled
[ 0.458076] pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.458153] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
[ 0.458158] pci 0000:06:00.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.458166] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
[ 0.458168] pci 0000:06:00.0: bridge window [mem 0xfe400000-0xfe4fffff] (subtractive decode)
[ 0.458170] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.458171] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.458172] pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.458174] pci 0000:06:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.458175] pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.458177] pci 0000:06:00.0: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 0.458211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.458301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.458327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.458357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.458386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.458410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 0.458438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
[ 0.458552] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.458830] pci0000:00: ACPI _OSC control (0x1c) granted
[ 0.462951] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.463475] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.463996] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.464484] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.464970] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.465491] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.466013] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.466536] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.467073] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.467172] vgaarb: loaded
[ 0.467234] vgaarb: bridge control possible 0000:00:02.0
[ 0.467396] SCSI subsystem initialized
[ 0.467493] libata version 3.00 loaded.
[ 0.467523] usbcore: registered new interface driver usbfs
[ 0.467597] usbcore: registered new interface driver hub
[ 0.467679] usbcore: registered new device driver usb
[ 0.467782] PCI: Using ACPI for IRQ routing
[ 0.469174] PCI: pci_cache_line_size set to 64 bytes
[ 0.469234] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.469236] reserve RAM buffer: 00000000bad32000 - 00000000bbffffff
[ 0.469239] reserve RAM buffer: 00000000badd1000 - 00000000bbffffff
[ 0.469241] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
[ 0.469243] reserve RAM buffer: 000000023fe00000 - 000000023fffffff
[ 0.469305] NetLabel: Initializing
[ 0.469368] NetLabel: domain hash size = 128
[ 0.469435] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.469507] NetLabel: unlabeled traffic allowed by default
[ 0.469580] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.469963] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.473040] Switching to clocksource hpet
[ 0.473412] Switched to NOHz mode on CPU #0
[ 0.473482] Switched to NOHz mode on CPU #2
[ 0.473504] Switched to NOHz mode on CPU #1
[ 0.473536] Switched to NOHz mode on CPU #3
[ 0.474875] AppArmor: AppArmor Filesystem Enabled
[ 0.474956] pnp: PnP ACPI init
[ 0.475027] ACPI: bus type pnp registered
[ 0.475233] pnp 00:00: [bus 00-ff]
[ 0.475235] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.475236] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.475238] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.475240] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.475241] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[ 0.475242] pnp 00:00: [mem 0xbfa00000-0xffffffff window]
[ 0.475244] pnp 00:00: [mem 0x00000000 window]
[ 0.475282] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.475337] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 0.475339] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.475340] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.475341] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.475342] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.475375] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.475444] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.475512] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.475581] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.475649] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.475717] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.475776] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.475777] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.475778] pnp 00:02: [io 0x0290-0x029f]
[ 0.475780] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.475802] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.475870] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.476160] pnp 00:03: [io 0x0378-0x037f]
[ 0.476167] pnp 00:03: [irq 5]
[ 0.476168] pnp 00:03: [dma 0 disabled]
[ 0.476266] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.476276] pnp 00:04: [dma 4]
[ 0.476277] pnp 00:04: [io 0x0000-0x000f]
[ 0.476278] pnp 00:04: [io 0x0081-0x0083]
[ 0.476280] pnp 00:04: [io 0x0087]
[ 0.476281] pnp 00:04: [io 0x0089-0x008b]
[ 0.476282] pnp 00:04: [io 0x008f]
[ 0.476283] pnp 00:04: [io 0x00c0-0x00df]
[ 0.476295] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.476303] pnp 00:05: [io 0x0070-0x0071]
[ 0.476307] pnp 00:05: [irq 8]
[ 0.476319] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.476325] pnp 00:06: [io 0x0061]
[ 0.476338] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.476350] pnp 00:07: [io 0x0010-0x001f]
[ 0.476351] pnp 00:07: [io 0x0022-0x003f]
[ 0.476352] pnp 00:07: [io 0x0044-0x005f]
[ 0.476354] pnp 00:07: [io 0x0063]
[ 0.476355] pnp 00:07: [io 0x0065]
[ 0.476356] pnp 00:07: [io 0x0067-0x006f]
[ 0.476357] pnp 00:07: [io 0x0072-0x007f]
[ 0.476358] pnp 00:07: [io 0x0080]
[ 0.476359] pnp 00:07: [io 0x0084-0x0086]
[ 0.476360] pnp 00:07: [io 0x0088]
[ 0.476361] pnp 00:07: [io 0x008c-0x008e]
[ 0.476362] pnp 00:07: [io 0x0090-0x009f]
[ 0.476363] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.476364] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.476365] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.476393] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.476462] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.476468] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.476472] pnp 00:08: [irq 13]
[ 0.476485] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.476694] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.476697] pnp 00:09: [irq 4]
[ 0.476698] pnp 00:09: [dma 0 disabled]
[ 0.476734] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.476901] pnp 00:0a: [io 0x0400-0x0453]
[ 0.476902] pnp 00:0a: [io 0x0458-0x047f]
[ 0.476903] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.476904] pnp 00:0a: [io 0x0500-0x057f]
[ 0.476905] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.476907] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.476908] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.476909] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.476935] system 00:0a: [io 0x0400-0x0453] has been reserved
[ 0.477003] system 00:0a: [io 0x0458-0x047f] has been reserved
[ 0.477070] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.477138] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.477212] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.477281] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.477350] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.477419] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.477452] pnp 00:0b: [io 0x0454-0x0457]
[ 0.477476] system 00:0b: [io 0x0454-0x0457] has been reserved
[ 0.477544] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.477672] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 0.477696] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.477828] pnp: PnP ACPI: found 13 devices
[ 0.477893] ACPI: ACPI bus type pnp unregistered
[ 0.483863] PCI: max bus depth: 2 pci_try_num: 3
[ 0.483912] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.483981] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.484055] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.484122] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.484196] pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.484270] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.484344] pci 0000:00:1c.6: PCI bridge to [bus 05-05]
[ 0.484411] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.484483] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.484579] pci 0000:06:00.0: PCI bridge to [bus 07-07]
[ 0.484647] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
[ 0.484720] pci 0000:06:00.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.484799] pci 0000:00:1c.7: PCI bridge to [bus 06-07]
[ 0.484866] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.484936] pci 0000:00:1c.7: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.485018] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.485087] pci 0000:00:01.0: setting latency timer to 64
[ 0.485093] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.485167] pci 0000:00:1c.0: setting latency timer to 64
[ 0.485172] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.485242] pci 0000:00:1c.4: setting latency timer to 64
[ 0.485246] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.485316] pci 0000:00:1c.5: setting latency timer to 64
[ 0.485323] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.485392] pci 0000:00:1c.6: setting latency timer to 64
[ 0.485400] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.485470] pci 0000:00:1c.7: setting latency timer to 64
[ 0.485476] pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.485548] pci 0000:06:00.0: setting latency timer to 64
[ 0.485551] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.485552] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.485554] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.485555] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
[ 0.485557] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.485558] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.485559] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.485560] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.485562] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.485563] pci_bus 0000:06: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.485564] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.485565] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.485567] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.485568] pci_bus 0000:06: resource 7 [mem 0xbfa00000-0xffffffff]
[ 0.485569] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
[ 0.485570] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.485572] pci_bus 0000:07: resource 4 [io 0xc000-0xcfff]
[ 0.485573] pci_bus 0000:07: resource 5 [mem 0xfe400000-0xfe4fffff]
[ 0.485574] pci_bus 0000:07: resource 8 [io 0x0000-0x0cf7]
[ 0.485575] pci_bus 0000:07: resource 9 [io 0x0d00-0xffff]
[ 0.485576] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.485578] pci_bus 0000:07: resource 11 [mem 0xbfa00000-0xffffffff]
[ 0.485626] NET: Registered protocol family 2
[ 0.485860] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.486744] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.488572] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.488849] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.488918] TCP reno registered
[ 0.488990] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.489092] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.489277] NET: Registered protocol family 1
[ 0.489353] pci 0000:00:02.0: Boot video device
[ 0.734615] PCI: CLS 64 bytes, default 64
[ 0.734668] Unpacking initramfs...
[ 0.844871] Freeing initrd memory: 9644k freed
[ 0.846043] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.846117] Placing 64MB software IO TLB between ffff8800b6d32000 - ffff8800bad32000
[ 0.846209] software IO TLB at phys 0xb6d32000 - 0xbad32000
[ 0.846702] audit: initializing netlink socket (disabled)
[ 0.846777] type=2000 audit(1326228588.689:1): initialized
[ 0.871933] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.894450] VFS: Disk quotas dquot_6.5.2
[ 0.894539] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.894790] msgmni has been set to 15822
[ 0.894981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.895090] io scheduler noop registered
[ 0.895155] io scheduler deadline registered
[ 0.895242] io scheduler cfq registered (default)
[ 0.895386] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.895406] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.895447] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.895482] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.895536] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.895570] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.895624] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.895658] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.895712] pcieport 0000:00:1c.6: setting latency timer to 64
[ 0.895747] pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
[ 0.895811] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.895881] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.895896] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.895966] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.895980] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.896049] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.896119] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.896133] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.896204] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.896217] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.896293] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.896364] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[ 0.896419] intel_idle: MWAIT substates: 0x1120
[ 0.896420] intel_idle: v0.4 model 0x2A
[ 0.896421] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.896452] ERST: Table is not found!
[ 0.896516] GHES: HEST is not enabled!
[ 0.896624] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.917183] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.058498] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.067047] Non-volatile memory driver v1.3
[ 1.067113] Linux agpgart interface v0.103
[ 1.067227] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.067374] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.068261] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.068417] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.068577] ata_piix 0000:00:1f.2: version 2.13
[ 1.068593] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.068664] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.219553] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
[ 1.219667] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.219839] scsi0 : ata_piix
[ 1.219961] scsi1 : ata_piix
[ 1.220903] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
[ 1.220972] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
[ 1.221054] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.221148] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.371225] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 1.371347] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.371465] scsi2 : ata_piix
[ 1.371582] scsi3 : ata_piix
[ 1.372962] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
[ 1.373520] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
[ 1.373645] Fixed MDIO Bus: probed
[ 1.373726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.373825] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.373912] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.373915] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.374002] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.374124] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.378064] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.378077] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe606000
[ 1.387152] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.387247] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.387321] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.387420] usb usb1: Product: EHCI Host Controller
[ 1.387490] usb usb1: Manufacturer: Linux 3.1.0-1.2-desktop ehci_hcd
[ 1.387564] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.387715] hub 1-0:1.0: USB hub found
[ 1.387786] hub 1-0:1.0: 2 ports detected
[ 1.387905] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.387988] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.387991] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.388065] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.388192] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.392136] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.392140] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe605000
[ 1.401129] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.401229] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.401297] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.401389] usb usb2: Product: EHCI Host Controller
[ 1.401454] usb usb2: Manufacturer: Linux 3.1.0-1.2-desktop ehci_hcd
[ 1.401522] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.401640] hub 2-0:1.0: USB hub found
[ 1.401705] hub 2-0:1.0: 2 ports detected
[ 1.401806] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.401878] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.401962] Initializing USB Mass Storage driver...
[ 1.402038] usbcore: registered new interface driver usb-storage
[ 1.402106] USB Mass Storage support registered.
[ 1.402182] usbcore: registered new interface driver ums-alauda
[ 1.402254] usbcore: registered new interface driver ums-cypress
[ 1.402325] usbcore: registered new interface driver ums-datafab
[ 1.402395] usbcore: registered new interface driver ums-freecom
[ 1.402467] usbcore: registered new interface driver ums-isd200
[ 1.402539] usbcore: registered new interface driver ums-jumpshot
[ 1.402611] usbcore: registered new interface driver ums-karma
[ 1.402681] usbcore: registered new interface driver ums-onetouch
[ 1.402753] usbcore: registered new interface driver ums-sddr09
[ 1.402824] usbcore: registered new interface driver ums-sddr55
[ 1.402895] usbcore: registered new interface driver ums-usbat
[ 1.402983] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.405481] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.405561] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.405678] mousedev: PS/2 mouse device common for all mice
[ 1.405811] rtc_cmos 00:05: RTC can wake from S4
[ 1.405963] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.406053] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.406202] cpuidle: using governor ladder
[ 1.406359] cpuidle: using governor menu
[ 1.406423] EFI Variables Facility v0.08 2004-May-17
[ 1.406608] usbcore: registered new interface driver usbhid
[ 1.406675] usbhid: USB HID core driver
[ 1.406839] TCP cubic registered
[ 1.406978] NET: Registered protocol family 10
[ 1.407315] lib80211: common routines for IEEE802.11 drivers
[ 1.407382] lib80211_crypt: registered algorithm 'NULL'
[ 1.407383] Registering the dns_resolver key type
[ 1.407459] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 1.407624] PM: Hibernation image not present or could not be loaded.
[ 1.407632] registered taskstats version 1
[ 1.419254] Magic number: 12:628:851
[ 1.419405] rtc_cmos 00:05: setting system clock to 2012-01-10 20:49:50 UTC (1326228590)
[ 1.536184] ata4.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 1.536269] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.542230] ata4.00: configured for UDMA/133
[ 1.542422] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 1.542593] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.542741] sd 3:0:0:0: [sda] Write Protect is off
[ 1.542822] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.542844] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.548044] sda: sda1 sda2
[ 1.548363] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.549266] Freeing unused kernel memory: 940k freed
[ 1.549418] Write protecting the kernel read-only data: 12288k
[ 1.550225] Freeing unused kernel memory: 336k freed
[ 1.553978] Freeing unused kernel memory: 2020k freed
[ 1.567918] pata_via 0000:03:00.0: version 0.3.4
[ 1.567933] pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.568033] pata_via 0000:03:00.0: setting latency timer to 64
[ 1.568204] scsi4 : pata_via
[ 1.568309] scsi5 : pata_via
[ 1.568486] ata5: PATA max UDMA/133 cmd 0xe040 ctl 0xe030 bmdma 0xe000 irq 16
[ 1.568555] ata6: PATA max UDMA/133 cmd 0xe020 ctl 0xe010 bmdma 0xe008 irq 16
[ 1.688549] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.802677] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.802764] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.803039] hub 1-1:1.0: USB hub found
[ 1.803272] hub 1-1:1.0: 6 ports detected
[ 1.846196] Refined TSC clocksource calibration: 3193.003 MHz.
[ 1.846281] Switching to clocksource tsc
[ 1.886604] udevd[94]: starting version 173
[ 1.893638] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.895242] ACPI: Power Button [PWRB]
[ 1.895372] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.896018] ACPI: Power Button [PWRF]
[ 1.900060] ACPI: acpi_idle yielding to intel_idle
[ 1.901909] [drm] Initialized drm 1.1.0 20060810
[ 1.906050] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 1.908305] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.908384] i915 0000:00:02.0: setting latency timer to 64
[ 1.957316] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 1.957413] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.957645] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 1.957648] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.957716] [drm] Driver supports precise vblank timestamp query.
[ 1.957806] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.013698] md: bind<sda1>
[ 2.020158] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.020230] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.020551] hub 2-1:1.0: USB hub found
[ 2.020655] hub 2-1:1.0: 8 ports detected
[ 2.114278] fbcon: inteldrmfb (fb0) is primary device
[ 2.274214] Console: switching to colour frame buffer device 128x48
[ 2.275534] fb0: inteldrmfb frame buffer device
[ 2.275548] drm: registered panic notifier
[ 2.276336] fixme: max PWM is zero.
[ 2.276442] acpi device:37: registered as cooling_device4
[ 2.276592] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 2.276647] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.276681] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.295339] usb 2-1.1: new low speed USB device number 3 using ehci_hcd
[ 2.387013] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c517
[ 2.387052] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.387074] usb 2-1.1: Product: USB Receiver
[ 2.387088] usb 2-1.1: Manufacturer: Logitech
[ 2.390107] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
[ 2.390323] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[ 2.395101] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 2.395363] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input4
[ 2.395647] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[ 2.400292] md: raid0 personality registered for level 0
[ 2.402842] md: raid1 personality registered for level 1
[ 2.404700] md: raid10 personality registered for level 10
[ 2.406322] async_tx: api initialized (async)
[ 2.407267] xor: automatically using best checksumming function: generic_sse
[ 2.412899] generic_sse: 14184.000 MB/sec
[ 2.413660] xor: using function: generic_sse (14184.000 MB/sec)
[ 2.430864] raid6: int64x1 3101 MB/s
[ 2.447836] raid6: int64x2 3742 MB/s
[ 2.464795] raid6: int64x4 3441 MB/s
[ 2.481769] raid6: int64x8 2750 MB/s
[ 2.498712] raid6: sse2x1 8578 MB/s
[ 2.515680] raid6: sse2x2 10660 MB/s
[ 2.532635] raid6: sse2x4 12218 MB/s
[ 2.533311] raid6: using algorithm sse2x4 (12218 MB/s)
[ 2.534517] md: raid6 personality registered for level 6
[ 2.535197] md: raid5 personality registered for level 5
[ 2.535863] md: raid4 personality registered for level 4
[ 2.661685] EXT4-fs (md0): unable to read superblock
[ 89.190831] usb 2-1.8: new high speed USB device number 4 using ehci_hcd
[ 89.281380] usb 2-1.8: New USB device found, idVendor=0951, idProduct=1624
[ 89.281976] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 89.282533] usb 2-1.8: Product: DataTraveler G2
[ 89.283088] usb 2-1.8: Manufacturer: Kingston
[ 89.283646] usb 2-1.8: SerialNumber: 001D0F0C7365EA51500000D3
[ 89.284423] scsi6 : usb-storage 2-1.8:1.0
[ 90.315009] scsi 6:0:0:0: Direct-Access Kingston DataTraveler G2 PMAP PQ: 0 ANSI: 0 CCS
[ 91.531307] sd 6:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 91.534193] sd 6:0:0:0: [sdb] Write Protect is off
[ 91.534825] sd 6:0:0:0: [sdb] Mode Sense: 03 41 00 00
[ 91.537058] sd 6:0:0:0: [sdb] No Caching mode page present
[ 91.537642] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 91.544803] sd 6:0:0:0: [sdb] No Caching mode page present
[ 91.545392] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 91.569868] sdb: sdb1
[ 91.576611] sd 6:0:0:0: [sdb] No Caching mode page present
[ 91.577222] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 91.577831] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 166.682004] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Code:
/dev/md0:
Version : 1.0
Creation Time : Tue Jan 3 20:11:33 2012
Raid Level : raid1
Array Size : 8039412 (7.67 GiB 8.23 GB)
Used Dev Size : 8039412 (7.67 GiB 8.23 GB)
Raid Devices : 2
Total Devices : 1
Persistence : Superblock is persistent
Intent Bitmap : Internal
Update Time : Tue Jan 10 22:03:05 2012
State : active, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
Name : 192.168.0.93:0
UUID : 193efb29:6a4c6d62:60270e88:4343e66f
Events : 708
Number Major Minor RaidDevice State
0 0 0 0 removed
1 8 1 1 active sync /dev/sda1
Code:
Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4]
md0 : inactive sda1[1](S)
8039412 blocks super 1.0
unused devices: <none>Noch ein paar info zum System
Suse 12.1 netz installation
Mainboard ist ein Asus P8H67-M der SATA controller ist auf SATA mode (oder so ähnlich jedenfalls nicht raid eingestellt)
eingebaut sind 2 x1TB festplatten (Samsung und Hitachi)
aufgeteilt in 2 Primäre Partitionen nach Zylinder Partitioniert einmal ca.8GB für / , md0 sda1, sdb1 und ca. 800MB für /swap md1 sda2, sdb2, der Rest ist leer
(habe ich so gemacht damit das Synchronisieren nicht ewig dauert )
Grub habe ich so installiert wie hier im HowTo beschrieben. Das klappt auch mit dem Starten alles Soweit.
Ach ja Arbeiten soll das System als File Server.
Vielleicht kann mir ja jemand helfen das das System auch nach einem Plattenausfall hochfährt.
Es geht darum das ich keine Zeit habe wenn das System ausfällt sofort hinzufahren und es wieder zum laufen zu bringen
Wenn es gar nicht anders geht mache ich nur den File Teil als Raid und installiere das System auf beiden Platten,
so das ich vielleicht per Fernzugriff das System mit den Dateien auf einer Platte wieder zum laufen bringen kann.
edit: Wenn ich das Raid mit einer Platte von Hand gestartet habe, Startet das System auch wieder bis zum Ende, mit einer Platte.