A
Anonymous
Gast
Hi,
da ich am WE plane, Windows 7 zu installieren, möchte ich gerne meine Grub-Konfiguration überprüfen, so dass die Installation dann nicht wie sonst immer eine Try-And-Error-Prozedur wird. Kann mir jemand sagen, ob das so passt? Ich hatte mir vor kurzem eine separate boot-Partition eingerichtet, und dabei den Grub zerschossen. Ich hatte dann solange rumprobiert, bis es wieder ging, das möchte ich gerne vermeiden.
Meine Partitionstabelle:
/dev/sdc1 ist /
/dev/sdc5 ist /boot
Meine device.map
Meine grub.conf
Meine menu.lst
Meine fstab:
Wäre nett, wenn das jemand überfliegen kann, ich möchte unnötiges Fluchen vermeiden am WE...
Danke
da ich am WE plane, Windows 7 zu installieren, möchte ich gerne meine Grub-Konfiguration überprüfen, so dass die Installation dann nicht wie sonst immer eine Try-And-Error-Prozedur wird. Kann mir jemand sagen, ob das so passt? Ich hatte mir vor kurzem eine separate boot-Partition eingerichtet, und dabei den Grub zerschossen. Ich hatte dann solange rumprobiert, bis es wieder ging, das möchte ich gerne vermeiden.
Meine Partitionstabelle:
Code:
root@RossTheBoss:/home/Herbie> fdisk -l
Platte /dev/sda: 200.0 GByte, 200049647616 Byte
255 Köpfe, 63 Sektoren/Spuren, 24321 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x368efd66
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 23015 184867956 7 HPFS/NTFS
/dev/sda2 23016 24321 10490413+ 7 HPFS/NTFS
Platte /dev/sdb: 250.0 GByte, 250059350016 Byte
255 Köpfe, 63 Sektoren/Spuren, 30401 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x18f817f2
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 * 1 3914 31439173+ 7 HPFS/NTFS
/dev/sdb2 3915 5872 15727635 7 HPFS/NTFS
/dev/sdb3 5873 23874 144601033+ 7 HPFS/NTFS
/dev/sdb4 23875 30401 52428124 7 HPFS/NTFS
Platte /dev/sdc: 160.0 GByte, 160041885696 Byte
255 Köpfe, 63 Sektoren/Spuren, 19457 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0xedc236a5
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdc1 * 1 1308 10506478+ 83 Linux
/dev/sdc2 1309 19457 145781842+ 5 Erweiterte
/dev/sdc5 1309 1340 257008+ 83 Linux
/dev/sdc6 1341 1862 4192933+ 82 Linux Swap / Solaris
/dev/sdc7 1863 9014 57448408+ 83 Linux
/dev/sdc8 9015 19457 83883364+ 7 HPFS/NTFS
root@RossTheBoss:/home/Herbie>
/dev/sdc5 ist /boot
Meine device.map
Code:
root@RossTheBoss:/home/Herbie> cat /boot/grub/device.map
(hd2) /dev/disk/by-id/ata-MAXTOR_STM3160215AS_9RA5AX9E
(hd0) /dev/disk/by-id/ata-SAMSUNG_HD250HJ_S0URJ9BP901410
(hd1) /dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJ1NQ602494
Meine grub.conf
Code:
root@RossTheBoss:/home/Herbie> cat /etc/grub.conf
setup --stage2=/boot/grub/stage2 (hd0) (hd2,4)
quit
Meine menu.lst
Code:
root@RossTheBoss:/home/Herbie> cat /boot/grub/menu.lst
# Modified by YaST2. Last modification on Fr Jul 24 15:06:00 CEST 2009
default 0
timeout 10
gfxmenu (hd2,4)/message
###Don't change this comment - YaST2 identifier: Original name: linux###
title Linux
root (hd2,4)
kernel /vmlinuz root=/dev/disk/by-id/scsi-SATA_MAXTOR_STM31602_9RA5AX9E-part1 resume=/dev/disk/by-id/scsi-SATA_MAXTOR_STM31602_9RA5AX9E-part6 splash=verbose showopts vga=0x31a
initrd /initrd
###Don't change this comment - YaST2 identifier: Original name: windows 1###
title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
Meine fstab:
Code:
root@RossTheBoss:/home/Herbie> cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
# Linux-Partitionen
/dev/disk/by-id/scsi-SATA_MAXTOR_STM31602_9RA5AX9E-part1 / ext3 acl,user_xattr 1 1
/dev/disk/by-id/scsi-SATA_MAXTOR_STM31602_9RA5AX9E-part5 /boot ext3 acl,user_xattr 1 1
/dev/disk/by-id/scsi-SATA_MAXTOR_STM31602_9RA5AX9E-part6 swap swap defaults 0 0
/dev/disk/by-id/scsi-SATA_MAXTOR_STM31602_9RA5AX9E-part7 /home ext3 acl,user_xattr 1 2
# Windows-Partitionen
/dev/disk/by-id/ata-SAMSUNG_HD250HJ_S0URJ9BP901410-part1 /windows/C ntfs-3g users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/ata-SAMSUNG_HD250HJ_S0URJ9BP901410-part2 /windows/D ntfs-3g users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/ata-SAMSUNG_HD250HJ_S0URJ9BP901410-part3 /windows/E ntfs-3g users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/ata-SAMSUNG_HD250HJ_S0URJ9BP901410-part4 /windows/F ntfs-3g rw,locale=de_DE.utf8,uid=1000,umask=0027 0 0
/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJ1NQ602494-part1 /windows/G ntfs-3g rw,locale=de_DE.utf8,uid=1000,umask=0027 0 0
/dev/disk/by-id/scsi-SATA_MAXTOR_STM31602_9RA5AX9E-part8 /windows/H ntfs-3g rw,locale=de_DE.utf8,uid=1000,umask=0027 0 0
/dev/disk/by-id/ata-SAMSUNG_HD200HJ_S16KJ1NQ602494-part2 /windows/I ntfs-3g rw,locale=de_DE.utf8,uid=1000,umask=0027 0 0
# Virtualbox USB-Unterstützung
usbfs /proc/bus/usb usbfs auto,busgid=1000,busmode=0775,devgid=1000,devmode=0664 0 0
Wäre nett, wenn das jemand überfliegen kann, ich möchte unnötiges Fluchen vermeiden am WE...
Danke