Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

[gelöst] Nach Update auf 11.1: Verzögerung beim Booten

Alles rund um die Systemverwaltung, die Administration und Konfiguration Eures Linuxsystems

Moderator: Moderatoren

Antworten
awsatnet
Member
Member
Beiträge: 53
Registriert: 14. Aug 2008, 18:33

[gelöst] Nach Update auf 11.1: Verzögerung beim Booten

Beitrag von awsatnet » 28. Jan 2009, 21:56

Folgendes System:
AMD Athlon 2500+ auf AsRock K7Upgrade880, 2 GB Ram, 1xHD 250 GB an IDE1-Master (3 Part mit Win), 1xHD 160 GB an IDE1-Slave (2xExt3 u. Swap mit openSuse), DVD-Laufwerk und DVD-Brenner an IDE2, 1xHD 160 GB an USB (NTFS mit ntfs-3g-Schreibzugriff), Multikartenleser an USB (intern). Kein RAID-System. Die SATA-Ports auf dem Board sind im BIOS deaktiviert.

Mit openSuse11.0 (bin erst kürzlich umgestiegen) lief das alles wunderbar, aber nach Update auf 11.1 habe ich folgendes Problem:
Das System bleibt beim Booten nach dem Aufruf "Starting MD Raid" exakt 30 Sekunden stehen, erst dann geht's weiter. Diese Verzögerung nervt etwas. Im Runlevel-Editor finde ich nichts, was auf einen laufenden RAID-Dienst hinweisen würde. Ich hätte bei der 11.0 bleiben sollen, die lief nämlich echt klasse, aber zu spät... :???:

hier meine /var/log/boot.msg:

Code: Alles auswählen

Inspecting /boot/System.map-2.6.27.7-9-default
Cannot find map file.
No module symbols loaded - kernel modules not enabled.

Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.27.7-9-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<6> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
<6> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
<6> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
<6> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
<6> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<6>DMI 2.3 present.
<5>AMI BIOS detected: BIOS may corrupt low RAM, working it around.
<6>last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
<6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>kernel direct mapping tables up to 38000000 @ 10000-15000
<6>RAMDISK: 37a73000 - 37fef868
<4>ACPI: RSDP 000F8C80, 0014 (r0 ACPIAM)
<4>ACPI: RSDT 7FFB0000, 0030 (r1 A M I  OEMRSDT   4000508 MSFT       97)
<4>ACPI: FACP 7FFB0200, 0081 (r2 A M I  OEMFACP   4000508 MSFT       97)
<4>ACPI: DSDT 7FFB0350, 346D (r1  K7UPG K7UPG001        1 INTL  2002026)
<4>ACPI: FACS 7FFC0000, 0040
<4>ACPI: APIC 7FFB0300, 004A (r1 A M I  OEMAPIC   4000508 MSFT       97)
<4>ACPI: OEMB 7FFC0040, 003F (r1 A M I  OEMBIOS   4000508 MSFT       97)
<7>ACPI: Local APIC address 0xfee00000
<5>1151MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>  mapped low ram: 0 - 38000000
<6>  low ram: 00000000 - 38000000
<6>  bootmap 00012000 - 00019000
<6>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
<6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
<6>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
<6>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
<6>  #3 [0000100000 - 00006509dc]    TEXT DATA BSS ==> [0000100000 - 00006509dc]
<6>  #4 [0037a73000 - 0037fef868]          RAMDISK ==> [0037a73000 - 0037fef868]
<6>  #5 [0000651000 - 0000654000]    INIT_PG_TABLE ==> [0000651000 - 0000654000]
<6>  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
<6>  #7 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
<6>  #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
<4>Zone PFN ranges:
<4>  DMA      0x00000010 -> 0x00001000
<4>  Normal   0x00001000 -> 0x00038000
<4>  HighMem  0x00038000 -> 0x0007ffb0
<4>Movable zone start PFN for each node
<4>early_node_map[2] active PFN ranges
<4>    0: 0x00000010 -> 0x0000009f
<4>    0: 0x00000100 -> 0x0007ffb0
<7>On node 0 totalpages: 524095
<7>free_area_init_node: node 0, pgdat c051ee00, node_mem_map c1000240
<7>  DMA zone: 3947 pages, LIFO batch:0
<7>  Normal zone: 223300 pages, LIFO batch:31
<7>  HighMem zone: 292240 pages, LIFO batch:31
<6>Using APIC driver default
<6>ACPI: PM-Timer IO Port: 0x808
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<6>SMP: Allowing 1 CPUs, 0 hotplug CPUs
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
<6>PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
<6>Allocating PCI resources starting at 88000000 (gap: 80000000:7ff80000)
<6>PERCPU: Allocating 39068 bytes of per cpu data
<7>NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519487
<5>Kernel command line: resume=/dev/disk/by-id/ata-SAMSUNG_SP1654N_S0GEJ1NL204023-part1 splash=silent vga=0x31a
<6>bootsplash: silent mode.
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<6>TSC: PIT calibration confirmed by PMTIMER.
<6>TSC: using PIT calibration value
<4>Detected 1833.076 MHz processor.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2065100k/2096832k available (2342k kernel code, 30404k reserved, 1960k data, 316k init, 1179328k highmem)
<6>virtual kernel memory layout:
<6>    fixmap  : 0xffdf6000 - 0xfffff000   (2084 kB)
<6>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
<6>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
<6>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
<6>      .init : 0xc053a000 - 0xc0589000   ( 316 kB)
<6>      .data : 0xc034988b - 0xc0533a90   (1960 kB)
<6>      .text : 0xc0100000 - 0xc034988b   (2342 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<7>CPA: page pool initialized 1 of 1 pages preallocated
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.15 BogoMIPS (lpj=7332304)
<4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
<6>Security Framework initialized
<6>SELinux:  Disabled at boot.
<6>AppArmor: AppArmor initialized
<4>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys ns
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 12k freed
<6>ACPI: Core revision 20080609
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 528 Objects with 50 Devices 140 Methods 27 Regions
<4> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>CPU0: AMD Athlon(tm) XP 2500+ stepping 00
<6>Brought up 1 CPUs
<6>Total of 1 processors activated (3666.15 BogoMIPS).
<7>CPU0 attaching NULL sched-domain.
<6>net_namespace: 1044 bytes
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
<6>PCI: Using configuration type 1 for base access
<4>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package initialization:....................................................................................................................
<4>Initialized 23/27 Regions 44/44 Fields 39/39 Buffers 10/11 Packages (537 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:
<4>Executed 0 _INI methods requiring 0 _STA executions (examined 53 objects)
<4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e3ffffff]
<7>pci 0000:00:01.0: supports D1
<7>PCI: 0000:00:09.0 reg 10 32bit mmio: [cfffe000, cfffefff]
<7>PCI: 0000:00:09.1 reg 10 32bit mmio: [cffff000, cfffffff]
<7>PCI: 0000:00:0b.0 reg 10 32bit mmio: [febe0000, febeffff]
<7>PCI: 0000:00:0b.0 reg 14 io port: [bc00, bc1f]
<7>PCI: 0000:00:0f.0 reg 10 io port: [ec00, ec07]
<7>PCI: 0000:00:0f.0 reg 14 io port: [e800, e803]
<7>PCI: 0000:00:0f.0 reg 18 io port: [e400, e407]
<7>PCI: 0000:00:0f.0 reg 1c io port: [e000, e003]
<7>PCI: 0000:00:0f.0 reg 20 io port: [dc00, dc0f]
<7>PCI: 0000:00:0f.0 reg 24 io port: [d800, d8ff]
<7>PCI: 0000:00:0f.1 reg 20 io port: [fc00, fc0f]
<7>PCI: 0000:00:10.0 reg 20 io port: [c000, c01f]
<7>pci 0000:00:10.0: supports D1
<7>pci 0000:00:10.0: supports D2
<6>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:10.0: PME# disabled
<7>PCI: 0000:00:10.1 reg 20 io port: [c400, c41f]
<7>pci 0000:00:10.1: supports D1
<7>pci 0000:00:10.1: supports D2
<6>pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:10.1: PME# disabled
<7>PCI: 0000:00:10.2 reg 20 io port: [c800, c81f]
<7>pci 0000:00:10.2: supports D1
<7>pci 0000:00:10.2: supports D2
<6>pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:10.2: PME# disabled
<7>PCI: 0000:00:10.3 reg 20 io port: [cc00, cc1f]
<7>pci 0000:00:10.3: supports D1
<7>pci 0000:00:10.3: supports D2
<6>pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:10.3: PME# disabled
<7>PCI: 0000:00:10.4 reg 10 32bit mmio: [febff800, febff8ff]
<7>pci 0000:00:10.4: supports D1
<7>pci 0000:00:10.4: supports D2
<6>pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:10.4: PME# disabled
<6>HPET not enabled in BIOS. You might try hpet=force boot option
<7>PCI: 0000:00:11.5 reg 10 io port: [d000, d0ff]
<7>pci 0000:00:11.5: supports D1
<7>pci 0000:00:11.5: supports D2
<7>PCI: 0000:00:12.0 reg 10 io port: [d400, d4ff]
<7>PCI: 0000:00:12.0 reg 14 32bit mmio: [febffc00, febffcff]
<7>pci 0000:00:12.0: supports D1
<7>pci 0000:00:12.0: supports D2
<6>pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:12.0: PME# disabled
<7>PCI: 0000:01:00.0 reg 10 32bit mmio: [b0000000, bfffffff]
<7>PCI: 0000:01:00.0 reg 14 io port: [a800, a8ff]
<7>PCI: 0000:01:00.0 reg 18 32bit mmio: [feaf0000, feafffff]
<7>PCI: 0000:01:00.0 reg 30 32bit mmio: [feac0000, feadffff]
<7>pci 0000:01:00.0: supports D1
<7>pci 0000:01:00.0: supports D2
<7>PCI: 0000:01:00.1 reg 10 32bit mmio: [a0000000, afffffff]
<7>PCI: 0000:01:00.1 reg 14 32bit mmio: [feae0000, feaeffff]
<7>pci 0000:01:00.1: supports D1
<7>pci 0000:01:00.1: supports D2
<7>PCI: bridge 0000:00:01.0 io port: [a000, afff]
<7>PCI: bridge 0000:00:01.0 32bit mmio: [fea00000, feafffff]
<7>PCI: bridge 0000:00:01.0 32bit mmio pref: [8ff00000, cfefffff]
<7>bus 00 -> node 0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - BE, should be 96 [20080609]
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 12 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>AppArmor: AppArmor Filesystem Enabled
<4>ACPI: RTC can wake from S4
<6>system 00:07: ioport range 0x295-0x296 has been reserved
<6>system 00:07: ioport range 0x3e0-0x3e7 has been reserved
<6>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:07: ioport range 0x800-0x87f has been reserved
<6>system 00:07: ioport range 0x400-0x41f has been reserved
<6>system 00:08: iomem range 0xfec80000-0xfec800ff has been reserved
<6>system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
<6>system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
<6>system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
<6>system 00:0b: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:0b: iomem range 0xc0000-0xdffff could not be reserved
<6>system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
<6>system 00:0b: iomem range 0x100000-0x7fffffff could not be reserved
<6>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
<6>pci 0000:00:01.0:   IO window: 0xa000-0xafff
<6>pci 0000:00:01.0:   MEM window: 0xfea00000-0xfeafffff
<6>pci 0000:00:01.0:   PREFETCH window: 0x0000008ff00000-0x000000cfefffff
<7>pci 0000:00:01.0: setting latency timer to 64
<6>bus: 00 index 0 io port: [0, ffff]
<6>bus: 00 index 1 mmio: [0, ffffffff]
<6>bus: 01 index 0 io port: [a000, afff]
<6>bus: 01 index 1 mmio: [fea00000, feafffff]
<6>bus: 01 index 2 mmio: [8ff00000, cfefffff]
<6>bus: 01 index 3 mmio: [0, 0]
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 5618k freed
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1233176054.568:1): initialized
<4>highmem bounce pool size: 64 pages
<6>HugeTLB registered 4 MB page size, pre-allocated 0 pages
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>msgmni has been set to 435
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>PCI: VIA PCI bridge detected.Disabling DAC.
<6>pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
<7>pci 0000:01:00.0: Boot video device
<6>vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 10240k, total 262144k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=101
<6>vesafb: protected mode interface info at c000:5757
<6>vesafb: pmi: set display start = c00c57eb, set palette = c00c5837
<6>vesafb: pmi: ports = a810 a816 a854 a838 a83c a85c a800 a804 a8b0 a8b2 a8b4 
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 113709 bytes
<6>bootsplash: ...found (1280x1024, 43709 bytes, v3).
<4>Console: switching to colour frame buffer device 156x60
<7>Switched to high resolution mode on CPU 0
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver8 ports, IRQ sharing enabled
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>TCP cubic registered
<4>Using IPI No-Shortcut mode
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 316k freed
<6>Write protecting the kernel text: 2344k
<6>Write protecting the kernel read-only data: 1768k
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<6>processor ACPI_CPU:00: registered as cooling_device0
<6>ACPI: No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>pata_via 0000:00:0f.1: version 0.3.3
<6>pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<6>scsi0 : pata_via
<6>scsi1 : pata_via
<6>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
<6>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
<6>ata1.00: ATA-8: ExcelStor Technology J9250, GM2OA42A, max UDMA/133
<6>ata1.00: 488397168 sectors, multi 16: LBA48 
<6>ata1.01: ATA-7: SAMSUNG SP1654N, BV100-37, max UDMA/100
<6>ata1.01: 312581808 sectors, multi 16: LBA48 
<6>ata1.00: configured for UDMA/133
<6>ata1.01: configured for UDMA/100
<6>ata2.00: ATAPI: LITE-ON DVD SOHD-16P9S, FS07, max UDMA/33
<6>ata2.01: ATAPI: TSSTcorp CDDVDW SH-S202N, SB02, max UDMA/66
<6>ata2.00: configured for UDMA/33
<6>ata2.01: configured for UDMA/66
<5>scsi 0:0:0:0: Direct-Access     ATA      ExcelStor Techno GM2O PQ: 0 ANSI: 5
<5>scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG SP1654N  BV10 PQ: 0 ANSI: 5
<5>scsi 1:0:0:0: CD-ROM            LITE-ON  DVD SOHD-16P9S   FS07 PQ: 0 ANSI: 5
<5>scsi 1:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-S202N  SB02 PQ: 0 ANSI: 5
<7>sata_via 0000:00:0f.0: version 2.4
<6>sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
<6>sata_via 0000:00:0f.0: routed to hard irq line 10
<6>scsi2 : sata_via
<6>scsi3 : sata_via
<6>ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
<6>ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
<6>input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
<6>ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
<6>ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
<6>Uniform Multi-Platform E-IDE driver
<6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
<6>udevd version 128 started
<5>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250GB/232GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250GB/232GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 < sda5<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<4> sda6 >
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<5>sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors: (160GB/149GiB)
<5>sd 0:0:1:0: [sdb] Write Protect is off
<7>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors: (160GB/149GiB)
<5>sd 0:0:1:0: [sdb] Write Protect is off
<7>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sdb:<6>USB Universal Host Controller Interface driver v3.0
<6>uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.0: UHCI Host Controller
<6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c000
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<4> sdb1 sdb2 sdb3
<5>sd 0:0:1:0: [sdb] Attached SCSI disk
<4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:10.0
<6>uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.1: UHCI Host Controller
<6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c400
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usb 1-1: new full speed USB device using uhci_hcd and address 2
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:10.1
<6>uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.2: UHCI Host Controller
<6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c800
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>usb 1-1: New USB device found, idVendor=04b4, idProduct=6830
<6>usb 1-1: New USB device strings: Mfr=56, Product=78, SerialNumber=100
<6>usb 1-1: Product: USB2.0 Storage Device
<6>usb 1-1: Manufacturer: Cypress Semiconductor
<6>usb 1-1: SerialNumber: DEF10000C4EE969
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:10.2
<6>uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.3: UHCI Host Controller
<6>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000cc00
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb 2-1: new low speed USB device using uhci_hcd and address 2
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:10.3
<6>ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
<6>ehci_hcd 0000:00:10.4: EHCI Host Controller
<6>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
<6>ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800
<6>usb 2-1: New USB device found, idVendor=147a, idProduct=e02d
<6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-1: Product: USB IR Receiver
<6>usb 2-1: Manufacturer: USB IR Receiver
<6>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 8 ports detected
<6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: EHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
<6>usb usb5: SerialNumber: 0000:00:10.4
<6>usb 1-1: USB disconnect, address 2
<6>usbcore: registered new interface driver hiddev
<6>usb 2-1: USB disconnect, address 2
<6>usb 5-1: new high speed USB device using ehci_hcd and address 2
<6>usb 5-1: configuration #1 chosen from 1 choice
<6>usb 5-1: New USB device found, idVendor=04b4, idProduct=6830
<6>usb 5-1: New USB device strings: Mfr=56, Product=78, SerialNumber=100
<6>usb 5-1: Product: USB2.0 Storage Device
<6>usb 5-1: Manufacturer: Cypress Semiconductor
<6>usb 5-1: SerialNumber: DEF10000C4EE969
<6>usb 5-7: new high speed USB device using ehci_hcd and address 5
<6>usb 5-7: configuration #1 chosen from 1 choice
<6>usb 5-7: New USB device found, idVendor=058f, idProduct=6362
<6>usb 5-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 5-7: Product: Mass Storage Device
<6>usb 5-7: Manufacturer: Generic
<6>usb 5-7: SerialNumber: 058F312D81B
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<6>usb 2-1: new low speed USB device using uhci_hcd and address 3
<6>PM: Starting manual resume from disk
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>input: USB IR Receiver USB IR Receiver as /devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0/input/input2
<6>input,hidraw0: USB HID v1.10 Keyboard [USB IR Receiver USB IR Receiver] on usb-0000:00:10.1-1
<6>usb 2-1: New USB device found, idVendor=147a, idProduct=e02d
<6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-1: Product: USB IR Receiver
<6>usb 2-1: Manufacturer: USB IR Receiver
<6>usb 2-2: new full speed USB device using uhci_hcd and address 4
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sdb2, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>usb 2-2: configuration #1 chosen from 1 choice
<6>usb 2-2: New USB device found, idVendor=04a9, idProduct=2206
<6>usb 2-2: New USB device strings: Mfr=64, Product=77, SerialNumber=0
<6>usb 2-2: Product: CanoScan
<6>usb 2-2: Manufacturer: Canon
<6>udevd version 128 started
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sd 0:0:1:0: Attached scsi generic sg1 type 0
<5>scsi 1:0:0:0: Attached scsi generic sg2 type 5
<5>scsi 1:0:1:0: Attached scsi generic sg3 type 5
<6>Linux agpgart interface v0.103
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<4>sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 1:0:0:0: Attached scsi CD-ROM sr0
<6>agpgart: Detected VIA KT880 chipset
<6>agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
<4>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<7>sr 1:0:1:0: Attached scsi CD-ROM sr1
<6>Linux video capture interface: v2.00
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<6>flexcop-pci: will use the HW PID filter.
<6>flexcop-pci: card revision 2
<6>b2c2_flexcop_pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
<6>DVB: registering new adapter (FlexCop Digital TV device)
<6>b2c2-flexcop: MAC address = 00:d0:d7:14:df:c7
<3>b2c2-flexcop: i2c master_xfer failed
<3>b2c2-flexcop: i2c master_xfer failed
<3>CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
<3>CX24123: wrong demod revision: 87
<6>bttv: driver version 0.9.17 loaded
<6>bttv: using 8 buffers with 2080k (520 pages) each for capture
<6>ACPI: Power Button (CM) [PWRB]
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>b2c2-flexcop: found 'ST STV0299 DVB-S' .
<4>DVB: registering frontend 0 (ST STV0299 DVB-S)...
<6>b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
<6>bttv: Bt8xx card found (0).
<6>bttv 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
<6>bttv0: Bt878 (rev 2) at 0000:00:09.0, irq: 17, latency: 32, mmio: 0xcfffe000
<6>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
<6>bttv0: using: Hauppauge (bt878) [card=10,autodetected]
<7>bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
<6>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
<6>bt878 #0 [sw]: Test OK
<6>tveeprom 3-0050: Hauppauge model 61204, rev AMA , serial# 3002480
<6>tveeprom 3-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5)
<6>tveeprom 3-0050: TV standards PAL(B/G) (eeprom 0x04)
<6>tveeprom 3-0050: audio processor is None (idx 0)
<6>tveeprom 3-0050: has no radio
<4>bttv0: Hauppauge eeprom indicates model#61204
<6>bttv0: tuner type=5
<6>bttv0: i2c: checking for MSP34xx @ 0x80... not found
<6>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
<6>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
<4>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
<6>[fglrx] Maximum main memory to use for locked dma buffers: 1896 MBytes.
<6>[fglrx]   vendor: 1002 device: 4150 count: 1
<6>[fglrx] ioport: bar 1, base 0xa800, size: 0x100
<6>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<6>[fglrx] Kernel PAT support detected, disabling driver built-in PAT support
<6>[fglrx] module loaded - fglrx 8.56.4 [Dec  1 2008] with 1 minors
<6>tuner' 3-0061: chip found @ 0xc2 (bt878 #0 [sw])
<6>Initializing USB Mass Storage driver...
<6>scsi4 : SCSI emulation for USB Mass Storage devices
<6>tuner-simple 3-0061: creating new instance
<6>tuner-simple 3-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
<6>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
<6>input: PC Speaker as /devices/platform/pcspkr/input/input5
<6>scsi5 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<7>usb-storage: device found at 5
<7>usb-storage: waiting for device to settle before scanning
<6>bttv0: registered device video0
<6>bttv0: registered device vbi0
<6>bttv0: PLL: 28636363 => 35468950 .. ok
<6>via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<6>eth0: VIA Rhine II at 0x1d400, 00:0b:6a:83:d3:2e, IRQ 23.
<6>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
<6>VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
<7>VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
<6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one year, y3k
<6>ALSA sound/pci/via82xx.c:1931: Using DXS as PCM Playback
<5>scsi 4:0:0:0: Direct-Access     SAMSUNG  SV1604E          0000 PQ: 0 ANSI: 0
<5>sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160GB/149GiB)
<5>sd 4:0:0:0: [sdc] Write Protect is off
<7>sd 4:0:0:0: [sdc] Mode Sense: 27 00 00 00
<3>sd 4:0:0:0: [sdc] Assuming drive cache: write through
<5>sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160GB/149GiB)
<5>scsi 5:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
<5>sd 4:0:0:0: [sdc] Write Protect is off
<7>sd 4:0:0:0: [sdc] Mode Sense: 27 00 00 00
<3>sd 4:0:0:0: [sdc] Assuming drive cache: write through
<6> sdc:<5>sd 5:0:0:0: [sdd] Attached SCSI removable disk
<5>sd 5:0:0:0: Attached scsi generic sg4 type 0
<5>scsi 5:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
<5>sd 5:0:0:1: [sde] Attached SCSI removable disk
<5>sd 5:0:0:1: Attached scsi generic sg5 type 0
<5>scsi 5:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
<5>sd 5:0:0:2: [sdf] Attached SCSI removable disk
<5>sd 5:0:0:2: Attached scsi generic sg6 type 0
<5>scsi 5:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
<5>sd 5:0:0:3: [sdg] Attached SCSI removable disk
<5>sd 5:0:0:3: Attached scsi generic sg7 type 0
<7>usb-storage: device scan complete
<6>Adding 2562328k swap on /dev/sdb1.  Priority:-1 extents:1 across:2562328k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
<6>usb 5-1: reset high speed USB device using ehci_hcd and address 2
<4> sdc1
<5>sd 4:0:0:0: [sdc] Attached SCSI disk
<5>sd 4:0:0:0: Attached scsi generic sg8 type 0
<7>usb-storage: device scan complete
<6>loop: module loaded
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sdb3, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.9)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Wed Jan 28 20:54:23 2009

Trying manual resume from /dev/disk/by-id/ata-SAMSUNG_SP1654N_S0GEJ1NL204023-part1
Invoking userspace resume from /dev/disk/by-id/ata-SAMSUNG_SP1654N_S0GEJ1NL204023-part1
resume: libgcrypt version: 1.4.1
Trying manual resume from /dev/disk/by-id/ata-SAMSUNG_SP1654N_S0GEJ1NL204023-part1
Invoking in-kernel resume from /dev/disk/by-id/ata-SAMSUNG_SP1654N_S0GEJ1NL204023-part1
Waiting for device /dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 to appear:  ok
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2: clean, 162453/2240224 files, 1344378/8960253 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2

Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Jan 28 21:54:25 2009

done
Starting udevd: done
Loading drivers, configuring devices: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
doneSetting up the hardware clockdone
Activating device mapper...
done
Starting MD Raid unused
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part3: recovering journal
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part3: clean, 13961/7372800 files, 1192982/29471242 blocks
donedone
Mounting local file systems...
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sdb3 on /home type ext3 (rw,acl,user_xattr)
doneFuse filesystem already availabledone
Mounting fuse control filesystemdone
Activating remaining swap-devices in /etc/fstab...
done<notice>killproc: kill(651,29)
Creating /var/log/boot.msg
doneConfiguring serial ports...
Configured serial ports
doneMounting securityfs on /sys/kernel/security done
Loading AppArmor profiles Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
done
Setting up hostname 'aws-suse'done
Setting up loopback interface     lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done
System Boot Control: The system has been set up
Skipped features: boot.md boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(651,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Wed Jan 28 20:55:11 2009

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting D-Bus daemondone
Starting acpid <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/sbin/acpid ]
acpid: starting up


done
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemonChecking/updating CPU microcode unused
Initializing random number generatordone
done
Setting up (localfs) network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done    eth0      device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
    eth0      IP address: 192.168.178.115/24   
doneSetting up service (localfs) network  .  .  .  .  .  .  .  .  .  .done
Starting rpcbind <notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/sbin/rpcbind ]
done
Not starting NFS client services - no NFS found in /etc/fstab:unused
Mount CIFS File Systems unused
Loading console font lat9w-16.psfu  -m trivial G0:loadable
doneLoading keymap assuming iso-8859-15 euro
Loading /usr/share/kbd/keymaps/i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
done<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting auditd done
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde3 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
Starting atieventsddone
Starting Avahi daemon done
Starting Avahi DNS Configuration daemon done
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
Starting java.binfmt_misc done
Starting lircd (/dev/lirc)<notice>startproc: execve (/usr/sbin/lircd) [ /usr/sbin/lircd -H default -d /dev/lirc ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/lircd ]
done
Setting up (remotefs) network interfaces:
Setting up service (remotefs) network  .  .  .  .  .  .  .  .  .  .done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
Starting mail service (Postfix)<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
Starting Samba SMB daemon done
done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
Starting smartd *** stack smashing detected ***: /usr/sbin/smartd terminated
======= Backtrace: =========
/lib/libc.so.6(__fortify_fail+0x48)[0xb7e51da8]
/lib/libc.so.6(__fortify_fail+0x0)[0xb7e51d60]
/usr/sbin/smartd[0xb807e424]
/usr/sbin/smartd[0xb8072215]
/usr/sbin/smartd[0xb8073ed6]
/usr/sbin/smartd[0xb807acd8]
/usr/sbin/smartd[0xb805f371]
/usr/sbin/smartd[0xb8060772]
/usr/sbin/smartd(main+0x35)[0xb80620d5]
/lib/libc.so.6(__libc_start_main+0xe5)[0xb7d81705]
/usr/sbin/smartd[0xb8054f41]
======= Memory map: ========
b7d64000-b7d66000 rw-p b7d64000 00:00 0 
b7d66000-b7d69000 r-xp 00000000 08:12 2003385    /lib/libdl-2.9.so
b7d69000-b7d6a000 r--p 00002000 08:12 2003385    /lib/libdl-2.9.so
b7d6a000-b7d6b000 rw-p 00003000 08:12 2003385    /lib/libdl-2.9.so
b7d6b000-b7ec0000 r-xp 00000000 08:12 2003249    /lib/libc-2.9.so
b7ec0000-b7ec1000 ---p 00155000 08:12 2003249    /lib/libc-2.9.so
b7ec1000-b7ec3000 r--p 00155000 08:12 2003249    /lib/libc-2.9.so
b7ec3000-b7ec4000 rw-p 00157000 08:12 2003249    /lib/libc-2.9.so
b7ec4000-b7ec7000 rw-p b7ec4000 00:00 0 
b7ec7000-b7ed4000 r-xp 00000000 08:12 2003398    /lib/libgcc_s.so.1
b7ed4000-b7ed5000 r--p 0000c000 08:12 2003398    /lib/libgcc_s.so.1
b7ed5000-b7ed6000 rw-p 0000d000 08:12 2003398    /lib/libgcc_s.so.1
b7ed6000-b7efd000 r-xp 00000000 08:12 2003402    /lib/libm-2.9.so
b7efd000-b7efe000 r--p 00026000 08:12 2003402    /lib/libm-2.9.so
b7efe000-b7eff000 rw-p 00027000 08:12 2003402    /lib/libm-2.9.so
b7eff000-b7fe7000 r-xp 00000000 08:12 1350813    /usr/lib/libstdc++.so.6.0.10
b7fe7000-b7fe8000 ---p 000e8000 08:12 1350813    /usr/lib/libstdc++.so.6.0.10
b7fe8000-b7fec000 r--p 000e8000 08:12 1350813    /usr/lib/libstdc++.so.6.0.10
b7fec000-b7fed000 rw-p 000ec000 08:12 1350813    /usr/lib/libstdc++.so.6.0.10
b7fed000-b7ff3000 rw-p b7fed000 00:00 0 
b7ff3000-b800e000 r-xp 00000000 08:12 2003393    /lib/libselinux.so.1
b800e000-b800f000 r--p 0001a000 08:12 2003393    /lib/libselinux.so.1
b800f000-b8010000 rw-p 0001b000 08:12 2003393    /lib/libselinux.so.1
b8010000-b8011000 rw-p b8010000 00:00 0 
b802c000-b804a000 r-xp 00000000 08:12 2003202    /lib/ld-2.9.so
b804a000-b804b000 r--p 0001d000 08:12 2003202    /lib/ld-2.9.so
b804b000-b804c000 rw-p 0001e000 08:12 2003202    /lib/ld-2.9.so
b804c000-b8099000 r-xp 00000000 08:12 1367677    /usr/sbin/smartd
b8099000-b809d000 r--p 0004c000 08:12 1367677    /usr/sbin/smartd
b809d000-b809e000 rw-p 00050000 08:12 1367677    /usr/sbin/smartd
b809e000-b80bf000 rw-p b809e000 00:00 0          [heap]
bf984000-bf999000 rw-p bffeb000 00:00 0          [stack]
ffffe000-fffff000 r-xp 00000000 00:00 0          [vdso]
/etc/init.d/smartd: line 180:  3597 Aborted                 $SMARTD_BIN $smartd_opts
done
Starting INET services. (xinetd)<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd -pidfile /var/run/xinetd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
done
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: microcode.ctl nfs smbfs
<notice>killproc: kill(2207,3)
Wie schalte ich dieses "Starting MD Raid" ab oder wie stelle ich das Teil ein, damit der Bootvorgang nicht 30 Sekunden stehen bleibt?

Gruß

Andi
Zuletzt geändert von awsatnet am 29. Jan 2009, 18:34, insgesamt 2-mal geändert.
HP Compaq 8000 Elite DC E5800, 2x3,2 ==> Opensuse Leap 42.2 64-bit Xfce, Win7Pro SP1 64-bit (Dualboot)
Lenovo Thinkpad T400, 2x2,4 ==> Xubuntu 16.04.02 LTS 64 bit auf xfs, Kernel 4.8.0-39
HP Compaq D530, P4 2,4 ==> Xubuntu 16.04 LTS

Werbung:
Tooltime
Advanced Hacker
Advanced Hacker
Beiträge: 1202
Registriert: 28. Mai 2008, 17:49

Re: Nach Update auf 11.1: Verzögerung beim Booten

Beitrag von Tooltime » 28. Jan 2009, 23:36

Runlevel-Editor -> Expertenmodus -> boot.md

Allerdings würde ich mich fragen warum überhaupt nach einen RAID gesucht wird. War mal im BIOS ein RAID eingerichtet, oder befand sich eins auf einer der Platten?

josef-wien
Ultimate Guru
Ultimate Guru
Beiträge: 5107
Registriert: 23. Sep 2008, 17:09

Re: Nach Update auf 11.1: Verzögerung beim Booten

Beitrag von josef-wien » 28. Jan 2009, 23:48

Suchen wir einmal:

Code: Alles auswählen

cat /etc/sysconfig/kernel
cat /etc/mdadm.conf
cat /proc/mdstat
ls /etc/init.d/boot.d/*boot.md
fdisk -l

awsatnet
Member
Member
Beiträge: 53
Registriert: 14. Aug 2008, 18:33

Re: Nach Update auf 11.1: Verzögerung beim Booten

Beitrag von awsatnet » 29. Jan 2009, 17:20

Na Klasse - da sitzt man vor dem Runlevel-Editor und sieht den Punkt "Expertenmodus" nicht...
"boot.md" war bei "B" ange"x"t - das x entfernt und der Bootvorgang flutscht. Super.

Warum das so ist? Ich hab' mich gefragt und habe keine Ahnung. Bei 11.0 wurde kein RAID-System gesucht, Phänomen trat erst nach dem Update auf 11.1 auf. Ich hatte auf dem Board auch noch kein RAID eingerichtet.

Also: vielen Dank erstmal.
HP Compaq 8000 Elite DC E5800, 2x3,2 ==> Opensuse Leap 42.2 64-bit Xfce, Win7Pro SP1 64-bit (Dualboot)
Lenovo Thinkpad T400, 2x2,4 ==> Xubuntu 16.04.02 LTS 64 bit auf xfs, Kernel 4.8.0-39
HP Compaq D530, P4 2,4 ==> Xubuntu 16.04 LTS

Antworten