Hallo,
Mein grub Loader hat Windows nicht angezeigt. Ich hab etwas gegoogelt (auch hier im Forum) und habe dann die Datei /boot/grub/menu.lst folgendermaßen ergänzt:
fdisk -l gibt folgendes aus:
Die WIndows Partition sollte /dev/sda4 sein. Die anderen beiden Festplatten sind extern und ich habe nur Daten darauf gespeichert.
boot/grub/device.map sieht so aus:
Wenn ich bei Starten des Systems Windows auswähle, sagt er mir Error 15: Datei nicht gefunden. Dass meine Installation kaputt ist, will ich mit nahezu 100% Wahrscheinlichkeit ausschließen. Ich versteh aber leider auch nicht, was in der menu.lst flasch ist, kann mir jemand helfen?
Danke schonmal im Vorraus
Mein grub Loader hat Windows nicht angezeigt. Ich hab etwas gegoogelt (auch hier im Forum) und habe dann die Datei /boot/grub/menu.lst folgendermaßen ergänzt:
Code:
# Modified by YaST2. Last modification on Fri Jan 16 16:36:32 CET 2009
default 0
timeout 8
gfxmenu (hd0,1)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title SUSE LINUX
root (hd0,1)
kernel /boot/vmlinuz root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJ9AQ916693-part2 splash=silent showopts
initrd /boot/initrd
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- SUSE LINUX
root (hd0,1)
kernel /boot/vmlinuz root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD502IJS13TJ9AQ916693-part2 showopts ide=nodma apm=off acpi=off noresume edd=off x11failsafe
initrd /boot/initrd
title Microsoft Windows XP Professional
rootnoverify (hd0,3)
savedefault
chainloader +1
fdisk -l gibt folgendes aus:
Code:
Platte /dev/sda: 500.1 GByte, 500107862016 Byte
255 Köpfe, 63 Sektoren/Spuren, 60801 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x0004b64a
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 1 262 2104483+ 82 Linux Swap / Solaris
/dev/sda2 * 263 2873 20972857+ 83 Linux
/dev/sda3 2874 14622 94373842+ 83 Linux
/dev/sda4 14623 60801 370932817+ 7 HPFS/NTFS
Platte /dev/sdd: 360.0 GByte, 360080695296 Byte
255 Köpfe, 63 Sektoren/Spuren, 43777 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x37bdebec
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdd1 1 43777 351638721 c W95 FAT32 (LBA)
Platte /dev/sde: 1019 MByte, 1019215872 Byte
14 Köpfe, 45 Sektoren/Spuren, 3159 Zylinder
Einheiten = Zylinder von 630 × 512 = 322560 Bytes
Disk identifier: 0x00000000
Gerät boot. Anfang Ende Blöcke Id System
/dev/sde1 1 3160 995203+ 6 FAT16
Die WIndows Partition sollte /dev/sda4 sein. Die anderen beiden Festplatten sind extern und ich habe nur Daten darauf gespeichert.
boot/grub/device.map sieht so aus:
Code:
(hd0) /dev/sda
(hd1) /dev/sdb
Wenn ich bei Starten des Systems Windows auswähle, sagt er mir Error 15: Datei nicht gefunden. Dass meine Installation kaputt ist, will ich mit nahezu 100% Wahrscheinlichkeit ausschließen. Ich versteh aber leider auch nicht, was in der menu.lst flasch ist, kann mir jemand helfen?
Danke schonmal im Vorraus