Mercenario
Newbie
Hallo zusammen!
Habe mir gestern Suse Linux 10.3. aufgespielt und es klappte eigentlich auch ganz gut hat nur ne zeit gedauert!
Nur beim normalen Starten des Systems dauerte es ne kleine Ewigkeit bis der rechner hochgefahren war.
hab dann mal ESC gedrückt um zu sehen was passiert, und es sah do aus als ob er probleme beim mounten von /dev/sdc5 massive schwierigkeiten hatte.
Viele Fehler mit Media Error usw. habe darauf mal im Netz rumngesucht und habe hier und im opensuse FAQ und WIKI was gefunden daruafhin Fdisk -l eingegeben ob er die partitionen auch findet, und das tut er auch.
nurt mounten tut er diese wohl nicht! Im Arbeitsplatz wird auch keine angezeigt nur die SDC 1 wird angezeigt!
das ist das was er mir bei fdisk -l anzeigte
Disk /dev/sda: 80.0 GB, 80060424192 bytes
255 heads, 63 sectors/track, 9733 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1c2f1c2e
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3187 25599546 7 HPFS/NTFS
/dev/sda2 3188 9733 52580745 f W95 Ext'd (LBA)
/dev/sda5 3188 4300 8932140 7 HPFS/NTFS
/dev/sda6 6503 9733 25952976 7 HPFS/NTFS
/dev/sda7 4300 4493 1558242 82 Linux swap / Solaris
/dev/sda8 4494 5344 6835626 83 Linux
/dev/sda9 5345 6502 9301603+ 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xa4420004
Device Boot Start End Blocks Id System
/dev/sdb1 2 19457 156280320 f W95 Ext'd (LBA)
/dev/sdb5 2 6376 51207156 7 HPFS/NTFS
/dev/sdb6 6377 12751 51207156 7 HPFS/NTFS
/dev/sdb7 12752 19457 53865913+ 7 HPFS/NTFS
Disk /dev/sdc: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x6b0c6b0c
Device Boot Start End Blocks Id System
/dev/sdc1 1 5100 40965718+ 7 HPFS/NTFS
/dev/sdc2 5101 10011 39447607+ f W95 Ext'd (LBA)
/dev/sdc5 5101 10011 39447576 7 HPFS/NTFS
daraufhin versuchte ich dieses und nun bin ich ratlos
fsck /dev/sdc5
fsck 1.40.2 (12-Jul-2007)
e2fsck 1.40.2 (12-Jul-2007)
fsck.ext2: No such file or directory while trying to open /dev/sdc5
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
error on stat() /dev/sdc5: No such file or directory
fsck.ext2 /dev/sdc5 failed (status 0x8). Run manually!
Armer hifloser NEuling braucht Hilfe
Gruß Merc
Habe mir gestern Suse Linux 10.3. aufgespielt und es klappte eigentlich auch ganz gut hat nur ne zeit gedauert!
Nur beim normalen Starten des Systems dauerte es ne kleine Ewigkeit bis der rechner hochgefahren war.
hab dann mal ESC gedrückt um zu sehen was passiert, und es sah do aus als ob er probleme beim mounten von /dev/sdc5 massive schwierigkeiten hatte.
Viele Fehler mit Media Error usw. habe darauf mal im Netz rumngesucht und habe hier und im opensuse FAQ und WIKI was gefunden daruafhin Fdisk -l eingegeben ob er die partitionen auch findet, und das tut er auch.
nurt mounten tut er diese wohl nicht! Im Arbeitsplatz wird auch keine angezeigt nur die SDC 1 wird angezeigt!
das ist das was er mir bei fdisk -l anzeigte
Disk /dev/sda: 80.0 GB, 80060424192 bytes
255 heads, 63 sectors/track, 9733 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1c2f1c2e
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3187 25599546 7 HPFS/NTFS
/dev/sda2 3188 9733 52580745 f W95 Ext'd (LBA)
/dev/sda5 3188 4300 8932140 7 HPFS/NTFS
/dev/sda6 6503 9733 25952976 7 HPFS/NTFS
/dev/sda7 4300 4493 1558242 82 Linux swap / Solaris
/dev/sda8 4494 5344 6835626 83 Linux
/dev/sda9 5345 6502 9301603+ 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xa4420004
Device Boot Start End Blocks Id System
/dev/sdb1 2 19457 156280320 f W95 Ext'd (LBA)
/dev/sdb5 2 6376 51207156 7 HPFS/NTFS
/dev/sdb6 6377 12751 51207156 7 HPFS/NTFS
/dev/sdb7 12752 19457 53865913+ 7 HPFS/NTFS
Disk /dev/sdc: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x6b0c6b0c
Device Boot Start End Blocks Id System
/dev/sdc1 1 5100 40965718+ 7 HPFS/NTFS
/dev/sdc2 5101 10011 39447607+ f W95 Ext'd (LBA)
/dev/sdc5 5101 10011 39447576 7 HPFS/NTFS
daraufhin versuchte ich dieses und nun bin ich ratlos
fsck /dev/sdc5
fsck 1.40.2 (12-Jul-2007)
e2fsck 1.40.2 (12-Jul-2007)
fsck.ext2: No such file or directory while trying to open /dev/sdc5
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
error on stat() /dev/sdc5: No such file or directory
fsck.ext2 /dev/sdc5 failed (status 0x8). Run manually!
Armer hifloser NEuling braucht Hilfe
Gruß Merc