Astrologie-Programm Skylender-./configure.......was fehlt

Alles rund um die Installation Eures Linuxsystems, sowie die Updatefunktionen des Systems und das Paketmanagement

Moderator: Moderatoren

Antworten
saturn
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2005, 15:55
Wohnort: Erfurt / Thüringen

Astrologie-Programm Skylender-./configure.......was fehlt

Beitrag von saturn » 10. Jun 2005, 13:55

Ich gruesse Euch

Folgendes Problem,ich will das Astrologie-Programm Skylender auf Suse 9.2 Prof
installieren,bekomme aber bei ./configure ,folgende Meldung(siehe unten).
Was für Dateien oder Pakete fehlen mir,als Anfaenger blicke ich bei dieser Auflistung nicht durch.

Dank schon einmal fuer Eure Hilfe

Mike

mike@linux:~/System/Programme/tar.gz ..../skylendar-1.3> ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
/bin/sh: /home/mike/System/Programme/tar.gz: No such file or directory
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wnon-virtual-dtor... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fexceptions... yes
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -frepo... yes
not using lib directory suffix
checking for ld used by GCC... /usr/i586-suse-linux/bin/ld
checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
checking for /usr/i586-suse-linux/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking for a sed that does not truncate output...
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... no
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
appending configuration tag "GCJ" to libtool
checking if gcj supports -fno-rtti -fno-exceptions... (cached) no
checking for gcj option to produce PIC... -fPIC
checking if gcj PIC flag -fPIC works... no
checking if gcj supports -c -o file.o... no
checking whether the gcj linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... socklen_t
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking for poll in -lpoll... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking if res_init is available... yes
checking for killpg in -lucb... no
checking for int... yes
checking size of int... 4
checking for long... yes
checking size of long... 4
checking for char *... yes
checking size of char *... 4
checking for char... yes
checking size of char... 1
checking for dlopen in -ldl... yes
checking for shl_unload in -ldld... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... configure: error: Can't find X includes. Please check your installation and add the correct paths!
mike@linux:~/System/Programme/tar.gz ..../skylendar-1.3>

Werbung:
Grothesk
Ultimate Guru
Ultimate Guru
Beiträge: 14662
Registriert: 26. Okt 2003, 11:52
Wohnort: Köln

Beitrag von Grothesk » 10. Jun 2005, 14:04

Du scheinst die x-devel-Pakete noch zu benötigen. Schau mal im yast nach xorg-devel.

saturn
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2005, 15:55
Wohnort: Erfurt / Thüringen

x-devel installiert

Beitrag von saturn » 10. Jun 2005, 14:30

Danke fuer die schnelle Hilfe

Ich habe nun einiges installiert,es kommt nur noch diese Meldung(siehe unten).
Habe ich eine zu hohe Programmversion von Qt ?
Wenn ja,wo bekomme ich die passende her.

Danke Gruss Mike

Heute kann ich auf Hilfe nicht mehr reagieren,ich muss zur Arbeit.

mike@linux:~/System/Programme/tar.gz ..../skylendar-1.3> ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
/bin/sh: /home/mike/System/Programme/tar.gz: No such file or directory
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wnon-virtual-dtor... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fexceptions... yes
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -frepo... yes
not using lib directory suffix
checking for ld used by GCC... /usr/i586-suse-linux/bin/ld
checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
checking for /usr/i586-suse-linux/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking for a sed that does not truncate output...
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... no
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
appending configuration tag "GCJ" to libtool
checking if gcj supports -fno-rtti -fno-exceptions... (cached) no
checking for gcj option to produce PIC... -fPIC
checking if gcj PIC flag -fPIC works... no
checking if gcj supports -c -o file.o... no
checking whether the gcj linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... socklen_t
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking for poll in -lpoll... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking if res_init is available... yes
checking for killpg in -lucb... no
checking for int... yes
checking size of int... 4
checking for long... yes
checking size of long... 4
checking for char *... yes
checking size of char *... 4
checking for char... yes
checking size of char... 1
checking for dlopen in -ldl... yes
checking for shl_unload in -ldld... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for IceConnectionNumber in -lICE... yes
checking for libXext... yes
checking for Xinerama... no
checking for pthread_create in -lpthread... yes
checking for extra includes... no
checking for extra libs... no
checking for libz... -lz
checking for libpng... -lpng -lz -lm
checking for libjpeg6b... no
checking for libjpeg... -ljpeg
checking for Qt... configure: error: Qt (>= Qt 3.1 (20021021)) (headers and libraries) not found. Please check your installation!
For more details about this problem, look at the end of config.log.
mike@linux:~/System/Programme/tar.gz ..../skylendar-1.3>

Benutzeravatar
TeXpert
Guru
Guru
Beiträge: 2166
Registriert: 17. Jan 2005, 11:22

Beitrag von TeXpert » 10. Jun 2005, 14:34

qt-dev oder qt-mt-dev installieren steht doch da....

hint: zum Kompilieren brauchst Du immer die passenden -dev Pakete, also wenn da der Name sthet -> Yast und NAME-dev oder -devel suchen (die heißen je nach Distribution anders)

und tu Dir selber einen Gefallen und installier das Tool nicht mit make install sondern mach mit checkinstall ein rpm draus, das kannst Du auch wieder löschen.

Code: Alles auswählen

# to resolve all your problems, try this:
HOWTO='pack c5,41*2,sqrt 7056,unpack(c,H)-2,oct 115' && perl -le "print $HOWTO"
Ich beantworte keine Supportfragen per PM!

Grothesk
Ultimate Guru
Ultimate Guru
Beiträge: 14662
Registriert: 26. Okt 2003, 11:52
Wohnort: Köln

Beitrag von Grothesk » 10. Jun 2005, 14:35

Dürfte das gleiche in grün sein. qt-devel installieren.

Benutzeravatar
roemi
Advanced Hacker
Advanced Hacker
Beiträge: 822
Registriert: 1. Apr 2004, 19:01
Wohnort: Hanau
Kontaktdaten:

Beitrag von roemi » 11. Jun 2005, 00:02

installieren, installieren und yast .... na, da weis ich doch wo's landet :wink:

saturn
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2005, 15:55
Wohnort: Erfurt / Thüringen

Beitrag von saturn » 11. Jun 2005, 15:33

Ich gruesse Euch

./configure hat nun funktioniert,obwohl noch einiges auf "no"ist.

Good - your configure finished. Start make now
ich habe nun "make" eingegeben und es kam dies:

Good - your configure finished. Start make now

mike@linux:~/System/Programme/tar.gz ..../skylendar-1.3> ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
/bin/sh: /home/mike/System/Programme/tar.gz: No such file or directory
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wnon-virtual-dtor... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fexceptions... yes
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -frepo... yes
not using lib directory suffix
checking for ld used by GCC... /usr/i586-suse-linux/bin/ld
checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
checking for /usr/i586-suse-linux/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking for a sed that does not truncate output...
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... no
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
appending configuration tag "GCJ" to libtool
checking if gcj supports -fno-rtti -fno-exceptions... (cached) no
checking for gcj option to produce PIC... -fPIC
checking if gcj PIC flag -fPIC works... no
checking if gcj supports -c -o file.o... no
checking whether the gcj linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... socklen_t
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking for poll in -lpoll... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking if res_init is available... yes
checking for killpg in -lucb... no
checking for int... yes
checking size of int... 4
checking for long... yes
checking size of long... 4
checking for char *... yes
checking size of char *... 4
checking for char... yes
checking size of char... 1
checking for dlopen in -ldl... yes
checking for shl_unload in -ldld... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for IceConnectionNumber in -lICE... yes
checking for libXext... yes
checking for Xinerama... no
checking for pthread_create in -lpthread... yes
checking for extra includes... no
checking for extra libs... no
checking for libz... -lz
checking for libpng... -lpng -lz -lm
checking for libjpeg6b... no
checking for libjpeg... -ljpeg
checking for Qt... libraries /usr/lib/qt3/lib, headers /usr/lib/qt3/include using -mt
checking if Qt compiles without flags... no
checking for moc... /usr/lib/qt3/bin/moc
checking for uic... /usr/lib/qt3/bin/uic
checking whether uic supports -L ... yes
checking whether uic supports -nounload ... yes
checking if Qt needs -ljpeg... no
checking for rpath... yes
checking for KDE... libraries /opt/kde3/lib, headers /opt/kde3/include
checking if UIC has KDE plugins available... yes
checking for KDE paths... defaults
checking for dcopidl... /opt/kde3/bin/dcopidl
checking for dcopidl2cpp... /opt/kde3/bin/dcopidl2cpp
checking for mcopidl... /opt/kde3/bin/mcopidl
checking for artsc-config... /opt/kde3/bin/artsc-config
checking for kde-config... /opt/kde3/bin/kde-config
checking for meinproc... /opt/kde3/bin/meinproc
checking if admin should be compiled... no
checking if doc should be compiled... yes
checking if po should be compiled... yes
checking if skylendar should be compiled... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating admin/Makefile
config.status: creating doc/Makefile
config.status: creating doc/en/Makefile
config.status: creating po/Makefile
config.status: creating skylendar/Makefile
config.status: creating skylendar/pics/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands

Good - your configure finished. Start make now

mike@linux:~/System/Programme/tar.gz ..../skylendar-1.3> make
make all-recursive
make[1]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3'
Making all in skylendar
make[2]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar'
Making all in pics
make[3]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar/pics'
make[3]: Für das Ziel »all« ist nichts zu tun.
make[3]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar/pics'
make[3]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar'
make[3]: Für das Ziel »all-am« ist nichts zu tun.
make[3]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar'
make[2]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar'
Making all in po
make[2]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/po'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/po'
Making all in doc
make[2]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc'
Making all in en
make[3]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc/en'
make[3]: Für das Ziel »all« ist nichts zu tun.
make[3]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc/en'
make[3]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc'
make[3]: Für das Ziel »all-am« ist nichts zu tun.
make[3]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc'
make[2]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc'
make[2]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3'
make[2]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3'
make[1]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3'
mike@linux:~/System/Programme/tar.gz ..../skylendar-1.3>

Was soll dies jetzt:Für das Ziel »all« ist nichts zu tun.


Mike

traffic
Guru
Guru
Beiträge: 2750
Registriert: 13. Feb 2005, 05:50

Beitrag von traffic » 11. Jun 2005, 16:16

Nichts. Das Programm ist jetzt fertig kompiliert und kann mit "make install" installiert werden. Diese "für das Ziel [...] ist nichts zu tun"-Meldungen bedeuten nur, dass der Compiler in diesen Verzeichnissen nichts zu tun hat. Ist ja auch logisch, dass es im Dokumentationsverzeichnis "doc" nichts zu kompilieren gibt. In den Quelltext-Verzeichnissen hat der Compiler alles erledigt.
openSUSE Factory - GNOME 2.32.1

saturn
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2005, 15:55
Wohnort: Erfurt / Thüringen

Beitrag von saturn » 12. Jun 2005, 11:27

Ich gruesse Euch

Ich habe nun make install durchgefuehrt und erhielt dies:

mike@linux:~/System/Programme/tar.gz ..../skylendar-1.3> su
Password:
linux:/home/mike/System/Programme/tar.gz ..../skylendar-1.3 # make install
Making install in skylendar
make[1]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar'
Making install in pics
make[2]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar/pics'
make[3]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar/pics'
make[3]: Für das Ziel »install-exec-am« ist nichts zu tun.
make[3]: Für das Ziel »install-data-am« ist nichts zu tun.
make[3]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar/pics'
make[2]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar/pics'
make[2]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar'
make[3]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar'
/bin/sh ../admin/mkinstalldirs /usr/local/kde/bin
/bin/sh ../libtool --silent --mode=install /usr/bin/install -c -p skylendar /usr/local/kde/bin/skylendar





Read the DESERVEWARE file !
/bin/sh ../admin/mkinstalldirs /usr/local/kde/share/apps/skylendar
/usr/bin/install -c -p -m 644 skylendarui.rc /usr/local/kde/share/apps/skylendar/skylendarui.rc
make[3]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar'
make[2]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar'
make[1]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/skylendar'
Making install in po
make[1]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/po'
make[2]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/po'
make[2]: Für das Ziel »install-exec-am« ist nichts zu tun.
/usr/bin/install -c -p -m 644 fr.gmo /usr/local/kde/share/locale/fr/LC_MESSAGES/skylendar.mo
make[2]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/po'
make[1]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/po'
Making install in doc
make[1]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc'
Making install in en
make[2]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc/en'
make[3]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc/en'
make[3]: Für das Ziel »install-exec-am« ist nichts zu tun.
/bin/sh ../../admin/mkinstalldirs /usr/local/kde/share/doc/HTML/en/skylendar
/usr/bin/install -c -p -m 644 2.png /usr/local/kde/share/doc/HTML/en/skylendar/2.png
/usr/bin/install -c -p -m 644 anim2.png /usr/local/kde/share/doc/HTML/en/skylendar/anim2.png
/usr/bin/install -c -p -m 644 animation.png /usr/local/kde/share/doc/HTML/en/skylendar/animation.png
/usr/bin/install -c -p -m 644 direction.png /usr/local/kde/share/doc/HTML/en/skylendar/direction.png
/usr/bin/install -c -p -m 644 index.docbook /usr/local/kde/share/doc/HTML/en/skylendar/index.docbook
/usr/bin/install -c -p -m 644 skylendar.png /usr/local/kde/share/doc/HTML/en/skylendar/skylendar.png
/bin/sh ../../admin/mkinstalldirs /usr/local/kde/share/doc/HTML/en/skylendar
/usr/bin/install -c -p -m 644 index.cache.bz2 /usr/local/kde/share/doc/HTML/en/skylendar/
rm -f /usr/local/kde/share/doc/HTML/en/skylendar/common
ln -s /opt/kde3/share/doc/HTML/en/common /usr/local/kde/share/doc/HTML/en/skylendar/common
make[3]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc/en'
make[2]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc/en'
make[2]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc'
make[3]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc'
make[3]: Für das Ziel »install-exec-am« ist nichts zu tun.
make[3]: Für das Ziel »install-data-am« ist nichts zu tun.
make[3]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc'
make[2]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc'
make[1]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3/doc'
make[1]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3'
make[2]: Entering directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3'
make[2]: Für das Ziel »install-exec-am« ist nichts zu tun.
make[2]: Für das Ziel »install-data-am« ist nichts zu tun.
make[2]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3'
make[1]: Leaving directory `/home/mike/System/Programme/tar.gz ..../skylendar-1.3'
linux:/home/mike/System/Programme/tar.gz ..../skylendar-1.3 #

wenn ich nun das Programm mit skylendar starten will,passiert nichts:

mike@linux:~> skylendar
bash: skylendar: command not found
mike@linux:~>

im config log habe ich dies gefunden:


## ---------------------- ##
## Running config.status. ##
## ---------------------- ##

This file was extended by config.status, which was
generated by GNU Autoconf 2.57. Invocation command line was

CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ /home/mike/System/Programme/tar.gz ..../skylendar-1.3/config.status

on linux

config.status:786: creating Makefile
config.status:846: error: cannot find input file: Makefile.in


Gruss Mike

Benutzeravatar
Martin Breidenbach
Ultimate Guru
Ultimate Guru
Beiträge: 5632
Registriert: 26. Mai 2004, 21:33
Wohnort: N 50.17599° E 8.73367°

Beitrag von Martin Breidenbach » 12. Jun 2005, 12:01

saturn hat geschrieben:/usr/local/kde/share/apps/skylendar/
Da mal reingeschaut ?
Nicht Böse sein ! Der Onkel macht doch nur Spaß !

saturn
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2005, 15:55
Wohnort: Erfurt / Thüringen

Beitrag von saturn » 12. Jun 2005, 12:18

Gruss

<!DOCTYPE kpartgui>
<kpartgui name="skylendar" version="2">
<MenuBar>
<Menu name="file"><text>&File</text>
<Action name="search for data"/>
<Action name="search for restrictions"/>
<Action name="edit countries"/>
<Action name="quit"/>
</Menu>
<Menu name="chart"><text>&Chart</text>
<Menu name="create"><text>&Create chart</text>
<Action name="standard chart"/>
<Action name="text list chart"/>
</Menu>
<Action name="edit params"/>
<Action name="duplicate window"/>
<Action name="export"/>
<Action name="increment"/>
<Action name="decrement"/>
</Menu>
<Menu name="data"><text>&Data</text>
<Action name="new data"/>
<Action name="new restrictions set"/>
<Action name="save"/>
<Action name="edit"/>
<Action name="delete"/>
<Action name="duplicate"/>
</Menu>
<Menu name="windows"><text>&Windows</text>
<Action name="tile"/>
<Action name="cascade"/>
</Menu>
</MenuBar>
<ToolBar name="mainToolBar">
<Action name="inew data"/>
<Action name="isearch for data"/>
<Separator/>
<Action name="onto ring 1"/>
<Action name="onto ring 2"/>
<Action name="onto ring 3"/>
<Action name="onto ring 4"/>
<Separator/>
<Action name="anim on off"/>
<Action name="inv anim"/>
</ToolBar>
</kpartgui>

Damit kann ich ersteinmal nichts anfangen,vieleicht Du?

Mike

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast