Alle Repos, die du benutzt, sollten in einer Version für 15.3 vorliegen. Schau dir die URLs dieser Repos an . Da ist normalerweise ein 15.2 drin. Dann kannst du mit einem Webbrowser checken, ob die URL mit 15.3 statt 15.2 auch existiert. Wenn alle Repos in der 15.3 Version existieren, sollte ein "zypper dup --releasever 15.3" ausreichen um das Upgrade durchzuführen.Welche Repos werden benötigt?
Nicht so ganz, releasever funktioniert nur, wenn in der URL der Repos auch ${releasever} in der URL des Repos steht:mkossmann schrieb:Alle Repos, die du benutzt, sollten in einer Version für 15.3 vorliegen. Schau dir die URLs dieser Repos an . Da ist normalerweise ein 15.2 drin. Dann kannst du mit einem Webbrowser checken, ob die URL mit 15.3 statt 15.2 auch existiert. Wenn alle Repos in der 15.3 Version existieren, sollte ein "zypper dup --releasever 15.3" ausreichen um das Upgrade durchzuführen.Welche Repos werden benötigt?
Wie immer ist ein Backup vor dem Upgrade empfehlenswert
zypper dup --allow-vendor-change --releasever 15.3
Packman Goettingen https://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Leap_15.3/
Haupt-Repository (OSS) http://download.opensuse.org/distribution/leap/15.3/repo/oss/
Non-OSS Repository http://download.opensuse.org/distribution/leap/15.3/repo/non-oss/
Hauptaktualisierungs-Repository/OSS) http://download.opensuse.org/update/leap/15.3/oss
Aktualisierungs-Repository (NoOSS) http://download.opensuse.org/update/leap/15.3/non-oss
Libre-Office http://download.opensuse.org/repositories/LibreOffice:/Factory/openSUSE_Leap_15.3/
Objekt nicht mehr verfügbar! Error 404
# zypper --releasever=15.3 ref
# zypper --releasever=15.3 dup
zypper lr -d
zypper dup --allow-vendor-change
zypper lr -d
efibootmgr -v
lsblk
gparted -l
cat /etc/default/grub
efibootmgr -v
BootCurrent: 0004
Timeout: 2 seconds
BootOrder: 0004,0000,0001,0003
Boot0000* Windows Boot Manager HD(2,GPT,4a65a02d-e14f-41d6-9807-a65dd348005e,0xfa000,0x31800)/File(\EFI\MICROSOFT\BOOT\BOOTMGFW.EFI)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* Hard Drive BBS(HD,,0x0)..GO..NO........s.K.I.N.G.S.T.O.N. .S.A.2.0.0.0.M.8.2.5.0.G....................A...........................&.h7q.......6..Gd-.;.A..MQ..L.5.0.0.2.6.B.7.6.8.3.7.7.1.8.C.A........BO..NO........u.T.O.S.H.I.B.A. .H.D.W.D.1.1.0....................A.................................>..Gd-.;.A..MQ..L. . . . . . . . . . .6. .3.9.2.V.1.J.S.N........BO..NO........u.W.D.C. .W.D.5.0.0.0.A.A.D.S.-.0.0.S.9.B.0....................A.................................>..Gd-.;.A..MQ..L. . . . .W. .-.D.C.W.V.A.C.9.9.2.9.3.2.3........BO..NO........u.W.D.C. .W.D.1.0.E.Z.R.X.-.0.0.L.4.H.B.0....................A.................................>..Gd-.;.A..MQ..L. . . . .W. .-.D.C.W.4.C.2.J.S.K.F.U.E.H........BO..NO........y.L.e.x.a.r. .S.S.D....................A...................................................0..Gd-.;.A..MQ..L.J.1.9.8.1.1.J.0.0.0.9.0.9........BO
Boot0003* CD/DVD Drive BBS(CDROM,,0x0)..GO..NO........u.D.R.W.-.2.4.D.5.M.T....................A.................................>..Gd-.;.A..MQ..L.M.K.J.G.T.8.5.E.2.9. .2. . . . . . . . ........BO
[lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 16M 0 part
└─sda2 8:2 0 931,5G 0 part /Windows/D:
sdb 8:16 0 931,5G 0 disk
└─sdb1 8:17 0 931,5G 0 part /Daten
sdc 8:32 0 465,8G 0 disk
└─sdc1 8:33 0 465,8G 0 part /sicherung
sr0 11:0 1 11,9M 0 rom
nvme0n1 259:0 0 232,9G 0 disk
├─nvme0n1p1 259:1 0 499M 0 part
├─nvme0n1p2 259:2 0 99M 0 part
├─nvme0n1p3 259:3 0 16M 0 part
└─nvme0n1p4 259:4 0 232,3G 0 part
nvme1n1 259:5 0 238,5G 0 disk
├─nvme1n1p1 259:6 0 256M 0 part /boot/efi
├─nvme1n1p2 259:7 0 30G 0 part /
├─nvme1n1p3 259:8 0 8G 0 part [SWAP]
└─nvme1n1p4 259:9 0 200,2G 0 part /home
[# If you change this file, run 'grub2-mkconfig -o /boot/grub2/grub.cfg' afterwards to updategparted -l
Unit \xe2\x97\x8f.service does not exist, proceeding anyway.
Unit \xe2\x97\x8f.service does not exist, proceeding anyway.
Unit \xe2\x97\x8f.service does not exist, proceeding anyway.
Unit \xe2\x97\x8f.service does not exist, proceeding anyway.
Unit \xe2\x97\x8f.service does not exist, proceeding anyway.
No protocol specified
======================
libparted : 3.2
======================
(gpartedbin:6550): GLib-GIO-CRITICAL **: 08:45:03.038: g_dbus_connection_register_object: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(gpartedbin:6550): GLib-GIO-CRITICAL **: 08:45:03.038: g_dbus_connection_register_object: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(gpartedbin:6550): GLib-GIO-CRITICAL **: 08:45:03.038: g_dbus_connection_get_unique_name: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
XDG_RUNTIME_DIR (/run/user/1000) is not owned by us (uid 0), but by uid 1000! (This could e.g. happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
Aufruf von stat für Gerät -l schlug fehl - Datei oder Verzeichnis nicht gefunden.
(gpartedbin:6550): GLib-GIO-CRITICAL **: 08:45:07.806: g_dbus_connection_register_object: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(gpartedbin:6550): GLib-GIO-CRITICAL **: 08:45:07.806: g_dbus_connection_register_object: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
(gpartedbin:6550): GLib-GIO-CRITICAL **: 08:45:07.806: g_dbus_connection_get_unique_name: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
XDG_RUNTIME_DIR (/run/user/1000) is not owned by us (uid 0), but by uid 1000! (This could e.g. happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
ALSA lib pulse.c:243pulse_connect) PulseAudio: Unable to connect: Verbindung verweigert
# /boot/grub2/grub.cfg.
# Uncomment to set your own custom distributor. If you leave it unset or empty, the default
# policy is to determine the value from /etc/os-release
GRUB_DISTRIBUTOR=
GRUB_DEFAULT=saved
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=7
GRUB_CMDLINE_LINUX_DEFAULT="splash=silent resume=/dev/disk/by-uuid/83086973-fb36-4248-b2ea-227cce9f5d1e quiet mitigations=auto"
GRUB_CMDLINE_LINUX=""
# Uncomment to automatically save last booted menu entry in GRUB2 environment
# variable `saved_entry'
# GRUB_SAVEDEFAULT="true"
#Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
# GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
#Uncomment to disable graphical terminal (grub-pc only)
GRUB_TERMINAL="gfxterm"
# The resolution used on graphical terminal
#note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE="auto"
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
# GRUB_DISABLE_LINUX_UUID=true
#Uncomment to disable generation of recovery mode menu entries
# GRUB_DISABLE_RECOVERY="true"
#Uncomment to get a beep at grub start
# GRUB_INIT_TUNE="480 440 1"
GRUB_BACKGROUND=
GRUB_THEME=/boot/grub2/themes/openSUSE/theme.txt
SUSE_BTRFS_SNAPSHOT_BOOTING="true"
GRUB_USE_LINUXEFI="true"
GRUB_DISABLE_OS_PROBER="false"
GRUB_ENABLE_CRYPTODISK="n"
GRUB_CMDLINE_XEN_DEFAULT="vga=gfx-1024x768x16"
quote]cat /etc/default/grub
# If you change this file, run 'grub2-mkconfig -o /boot/grub2/grub.cfg' afterwards to update
# /boot/grub2/grub.cfg.
# Uncomment to set your own custom distributor. If you leave it unset or empty, the default
# policy is to determine the value from /etc/os-release
GRUB_DISTRIBUTOR=
GRUB_DEFAULT=saved
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=7
GRUB_CMDLINE_LINUX_DEFAULT="splash=silent resume=/dev/disk/by-uuid/83086973-fb36-4248-b2ea-227cce9f5d1e quiet mitigations=auto"
GRUB_CMDLINE_LINUX=""
# Uncomment to automatically save last booted menu entry in GRUB2 environment
# variable `saved_entry'
# GRUB_SAVEDEFAULT="true"
#Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
# GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
#Uncomment to disable graphical terminal (grub-pc only)
GRUB_TERMINAL="gfxterm"
# The resolution used on graphical terminal
#note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE="auto"
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
# GRUB_DISABLE_LINUX_UUID=true
#Uncomment to disable generation of recovery mode menu entries
# GRUB_DISABLE_RECOVERY="true"
#Uncomment to get a beep at grub start
# GRUB_INIT_TUNE="480 440 1"
GRUB_BACKGROUND=
GRUB_THEME=/boot/grub2/themes/openSUSE/theme.txt
SUSE_BTRFS_SNAPSHOT_BOOTING="true"
GRUB_USE_LINUXEFI="true"
GRUB_DISABLE_OS_PROBER="false"
GRUB_ENABLE_CRYPTODISK="n"
GRUB_CMDLINE_XEN_DEFAULT="vga=gfx-1024x768x16"
ls -lR /boot/efi
Konsole Ausgabe
Zitate usw
nvme1n1 259:5 0 238,5G 0 disk
├─nvme1n1p1 259:6 0 256M 0 part /boot/efi
├─nvme1n1p2 259:7 0 30G 0 part /
├─nvme1n1p3 259:8 0 8G 0 part [SWAP]
└─nvme1n1p4 259:9 0 200,2G 0 part /home
weber@localhost:~> ls -lR /boot/efi
/boot/efi:
insgesamt 12
drwxr-xr-x 2 root root 4096 4. Apr 2020 $RECYCLE.BIN
drwxr-xr-x 6 root root 4096 15. Jun 09:01 EFI
drwxr-xr-x 3 root root 4096 21. Feb 2020 System Volume Information
/boot/efi/$RECYCLE.BIN:
insgesamt 1212
-rwxr-xr-x 1 root root 70 15. Jun 18:45 $IKU3A0S.cfg
-rwxr-xr-x 1 root root 70 15. Jun 18:45 $ITGW8P4.efi
-rwxr-xr-x 1 root root 155 15. Jun 18:21 $RKU3A0S.cfg
-rwxr-xr-x 1 root root 1222656 15. Jun 18:21 $RTGW8P4.efi
-rwxr-xr-x 1 root root 129 4. Apr 2020 desktop.ini
/boot/efi/EFI:
insgesamt 16
drwxr-xr-x 2 root root 4096 15. Jun 18:21 boot
drwxr-xr-x 4 root root 4096 22. Nov 2020 EFI
drwxr-xr-x 3 root root 4096 30. Dez 18:16 opensuse
drwxr-xr-x 3 root root 4096 15. Jun 09:01 sles
/boot/efi/EFI/boot:
insgesamt 1228
-rwxr-xr-x 1 root root 319488 16. Jun 07:44 bootx64.efi
-rwxr-xr-x 1 root root 86352 15. Jun 19:09 fallback.efi
-rwxr-xr-x 1 root root 846240 15. Jun 19:09 MokManager.efi
/boot/efi/EFI/EFI:
insgesamt 8
drwxr-xr-x 2 root root 4096 22. Nov 2020 boot
drwxr-xr-x 3 root root 4096 22. Nov 2020 opensuse
/boot/efi/EFI/EFI/boot:
insgesamt 3728
-rwxr-xr-x 1 root root 1336112 16. Nov 2020 bootx64.efi
-rwxr-xr-x 1 root root 1209656 16. Nov 2020 fallback.efi
-rwxr-xr-x 1 root root 1263312 16. Nov 2020 MokManager.efi
/boot/efi/EFI/EFI/opensuse:
insgesamt 4096
-rwxr-xr-x 1 root root 58 16. Nov 2020 boot.csv
drwxr-xr-x 2 root root 4096 2. Jul 2020 fw
-rwxr-xr-x 1 root root 63744 24. Aug 2020 fwupdx64.efi
-rwxr-xr-x 1 root root 155 16. Nov 2020 grub.cfg
-rwxr-xr-x 1 root root 1197936 16. Nov 2020 grub.efi
-rwxr-xr-x 1 root root 311296 16. Nov 2020 grubx64.efi
-rwxr-xr-x 1 root root 1263312 16. Nov 2020 MokManager.efi
-rwxr-xr-x 1 root root 1336112 16. Nov 2020 shim.efi
/boot/efi/EFI/EFI/opensuse/fw:
insgesamt 0
/boot/efi/EFI/opensuse:
insgesamt 3408
-rwxr-xr-x 1 root root 58 16. Jun 12:47 boot.csv
drwxr-xr-x 2 root root 4096 2. Jul 2020 fw
-rwxr-xr-x 1 root root 63744 24. Aug 2020 fwupdx64.efi
-rwxr-xr-x 1 root root 77592 9. Apr 16:58 fwupx64.efi
-rwxr-xr-x 1 root root 155 16. Jun 12:47 grub.cfg
-rwxr-xr-x 1 root root 1222656 16. Jun 12:47 grub.efi
-rwxr-xr-x 1 root root 319488 16. Jun 12:47 grubx64.efi
-rwxr-xr-x 1 root root 846240 16. Jun 12:47 MokManager.efi
-rwxr-xr-x 1 root root 939800 16. Jun 12:47 shim.efi
/boot/efi/EFI/opensuse/fw:
insgesamt 0
/boot/efi/EFI/sles:
insgesamt 80
drwxr-xr-x 2 root root 4096 15. Jun 09:01 fw
-rwxr-xr-x 1 root root 77736 15. Jun 09:01 fwupx64.efi
/boot/efi/EFI/sles/fw:
insgesamt 0
/boot/efi/System Volume Information:
insgesamt 12
drwxr-xr-x 3 root root 4096 27. Feb 2020 EDP
-rwxr-xr-x 1 root root 76 21. Feb 2020 IndexerVolumeGuid
-rwxr-xr-x 1 root root 12 21. Feb 2020 WPSettings.dat
/boot/efi/System Volume Information/EDP:
insgesamt 4
drwxr-xr-x 2 root root 4096 27. Feb 2020 Recovery
/boot/efi/System Volume Information/EDP/Recovery:
Ist das ein Acer Computer?egweber1 schrieb:Habe versucht über UEFI mit F2 und dann F8 die SSD auszuwählen,
starte dann und es kommt: Missing operating system
Computer friert dann ein.