Heinz-Peter
Guru
Hallo Linuxgemeinde,
habe Kubuntu 18.04.1 LTS installiert, anschließend Grub 2. Die Kubuntu Installationsroutine hat Grub 2 in die sda Festplatte installiert, hat auch alles geklappt. Ich habe hier ein Lappi mit EFI und eigentlich sollte Grub in die EFI Partition installiert werden. Ist das so richtig oder irre ich?
Es gibt’s die Möglichkeit den Botloodar mit EFI, siehe Link https://wiki.ubuntuusers.de/GRUB_2/Grundlagen/#Mit-EFI oder ohne EFI, siehe Link https://wiki.ubuntuusers.de/GRUB_2/Grundlagen/#Ohne-EFI auf einer GPT Platte installieren.
Wie bekomme ich heraus den Installationsort von Grub ?
Hier paar Infos zu Lappi.
sda3=Kubuntu root Partition
sda6=Leap 42.3 root Partition
sdb1=efi Windows 10. An der sdb Platte habe ich nichts geändert, hier war schon Windows 10 vorinstalliert.
sda1=efi die ich mit GParted selber angelegt habe.
Hoffe auf Eure Hilfe.
Grüße Heinz-Peter
habe Kubuntu 18.04.1 LTS installiert, anschließend Grub 2. Die Kubuntu Installationsroutine hat Grub 2 in die sda Festplatte installiert, hat auch alles geklappt. Ich habe hier ein Lappi mit EFI und eigentlich sollte Grub in die EFI Partition installiert werden. Ist das so richtig oder irre ich?
Es gibt’s die Möglichkeit den Botloodar mit EFI, siehe Link https://wiki.ubuntuusers.de/GRUB_2/Grundlagen/#Mit-EFI oder ohne EFI, siehe Link https://wiki.ubuntuusers.de/GRUB_2/Grundlagen/#Ohne-EFI auf einer GPT Platte installieren.
Wie bekomme ich heraus den Installationsort von Grub ?
Hier paar Infos zu Lappi.
Code:
# lsblk -o name,uuid,fstype,mountpoint,label,size
lsblk -o name,uuid,fstype,mountpoint,label,size
NAME UUID FSTYPE MOUNTPOINT LABEL SIZE
sda 931,5G
├─sda1 5177-E313 vfat /boot/efi 160M
├─sda2 CCE44664E44650BE ntfs Win_Data 550G
├─sda3 f293f823-6c0a-404d-9a7b-db5ee9c155ee ext4 / 18G
├─sda4 2A2464D02464A095 ntfs Recover 30G
├─sda5 7ff3fc98-a410-42e5-b876-e49cfd95e493 ext4 /home 200G
├─sda6 03baf566-85bf-408f-890b-f554cb1e1690 ext4 19G
├─sda7 fde7eab5-fbdf-454c-b383-cbba1e46b475 swap [SWAP] 4G
├─sda8 BB62-3F29 vfat /FAT32Win10 FAT32WIN10 50G
└─sda9 699E836F0584D10A ntfs NTFS_Win10 60,4G
sdb 119,2G
├─sdb1 6073-48EE vfat 100M
├─sdb2 16M
├─sdb3 648C71558C7122AA ntfs Boot 117,3G
├─sdb4 EA120A2B1209FCF7 ntfs 819M
└─sdb5 AEF7-BF87 vfat PRC_RP 1G
sr0 1024M
sda6=Leap 42.3 root Partition
sdb1=efi Windows 10. An der sdb Platte habe ich nichts geändert, hier war schon Windows 10 vorinstalliert.
sda1=efi die ich mit GParted selber angelegt habe.
Code:
# hexdump -v -s 0x80 -n 2 -e '2/1 "%x" "\n"' /dev/sda1
696e
Code:
# find /boot/efi -iname "*efi"
/boot/efi
/boot/efi/EFI
/boot/efi/EFI/boot/bootx64.efi
/boot/efi/EFI/boot/fallback.efi
/boot/efi/EFI/boot/fbx64.efi
/boot/efi/EFI/opensuse/shim.efi
/boot/efi/EFI/opensuse/MokManager.efi
/boot/efi/EFI/opensuse/grub.efi
/boot/efi/EFI/opensuse/grubx64.efi
/boot/efi/EFI/ubuntu/fwupx64.efi
/boot/efi/EFI/ubuntu/grubx64.efi
/boot/efi/EFI/ubuntu/shimx64.efi
/boot/efi/EFI/ubuntu/mmx64.efi
Code:
# parted -l
Modell: ATA TOSHIBA MQ01ABD1 (scsi)
Festplatte /dev/sda: 1000GB
Sektorgröße (logisch/physisch): 512B/4096B
Partitionstabelle: gpt
Disk-Flags:
Nummer Anfang Ende Größe Dateisystem Name Flags
1 1049kB 169MB 168MB fat16 boot, esp
3 169MB 19,5GB 19,3GB ext4
5 19,5GB 234GB 215GB ext4
6 234GB 255GB 20,4GB ext4
7 255GB 259GB 4295MB linux-swap(v1) msftdata
8 259GB 313GB 53,7GB fat32 msftdata
9 313GB 377GB 64,9GB ntfs msftdata
2 377GB 968GB 591GB ntfs msftdata
4 968GB 1000GB 32,2GB ntfs Basic data partition msftdata
Modell: ATA S11-128G-PHISON- (scsi)
Festplatte /dev/sdb: 128GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: gpt
Disk-Flags:
Nummer Anfang Ende Größe Dateisystem Name Flags
1 1049kB 106MB 105MB fat32 EFI system partition boot, esp
2 106MB 123MB 16,8MB Microsoft reserved partition msftres
3 123MB 126GB 126GB ntfs Basic data partition msftdata
4 126GB 127GB 859MB ntfs versteckt, diag
5 127GB 128GB 1074MB fat32 Basic data partition versteckt
Grüße Heinz-Peter