Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

Tumbleweed und Radeon RX480 crash [gelöst]

Alles rund um die Installation Eures Linuxsystems, sowie die Updatefunktionen des Systems und das Paketmanagement

Moderator: Moderatoren

Antworten
Manja
Newbie
Newbie
Beiträge: 15
Registriert: 21. Nov 2007, 20:36

Tumbleweed und Radeon RX480 crash [gelöst]

Beitrag von Manja » 23. Jan 2018, 18:21

Hallo,
seit Kernel 4.14.13-1 und auch 4.14.14-1 hängt sich Tumbleweed bei Start X-Display Manager auf.
Ich habe eine Radeon RX480 eingebaut. 64 Bit System.
Gut, dass sich das System in der Command-Line mit:
snapper list
snapper undochange <preNummer>..<postNummer>
zurück fahren lässt. Der vorherige Kernel 4.14.12-1 funktioniert noch.
Zuletzt geändert von Manja am 2. Feb 2018, 11:06, insgesamt 1-mal geändert.

Werbung:
Benutzeravatar
swannema
Member
Member
Beiträge: 165
Registriert: 10. Feb 2004, 13:45

Re: Tumbleweed und Radeon RX480 crash

Beitrag von swannema » 23. Jan 2018, 19:52

Könnte auch am evtl. fehlenden Mesa-dri Packet liegen, also bitte mal nachschauen ob das installiert ist.

spoensche
Moderator
Moderator
Beiträge: 7292
Registriert: 30. Okt 2004, 23:53
Wohnort: Siegen

Re: Tumbleweed und Radeon RX480 crash

Beitrag von spoensche » 26. Jan 2018, 20:25

Hätte, könnte sollte müsste. Butter bei die Fische und Klartext.:)

Boote mit einem der Kernel bei denen X nicht startet. Dann postest du bitte mal die Ausgabe von

Code: Alles auswählen

egrep "EE|WW" /var/log/Xorg.0.log
und von

Code: Alles auswählen

 lsmod | egrep -i "amd|nouv"
und von

Code: Alles auswählen

dmesg | egrep -i "acpi|apic|err|warn|fail|fault|crit
und teile uns noch mit um was für einen Rechner es sich handelt und wie alt er ist.

Manja
Newbie
Newbie
Beiträge: 15
Registriert: 21. Nov 2007, 20:36

Re: Tumbleweed und Radeon RX480 crash

Beitrag von Manja » 29. Jan 2018, 18:06

Hallo,
nun konnte ich die Auszüge erstellen:
egrep "EE|WW" /var/log/Xorg.0.log:

Code: Alles auswählen

[   331.166] Current Operating System: Linux linux-nq8x 4.14.15-1-default #1 SMP PREEMPT Thu Jan 25 13:26:16 UTC 2018 (5b3d0ce) x86_64
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   331.167] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[   331.264] (EE) 
[   331.264] (EE) Backtrace:
[   331.264] (EE) 0: /usr/bin/X (xorg_backtrace+0x65) [0x5617bdfc24a5]
[   331.264] (EE) 1: /usr/bin/X (0x5617bde0d000+0x1b9259) [0x5617bdfc6259]
[   331.264] (EE) 2: /lib64/libpthread.so.0 (0x7f68d5b04000+0x12270) [0x7f68d5b16270]
[   331.264] (EE) 3: /usr/lib64/libEGL_mesa.so.0 (0x7f68c816c000+0x19942) [0x7f68c8185942]
[   331.264] (EE) 4: /usr/lib64/libEGL_mesa.so.0 (0x7f68c816c000+0x20b9a) [0x7f68c818cb9a]
[   331.264] (EE) 5: /usr/lib64/libEGL_mesa.so.0 (0x7f68c816c000+0x186a5) [0x7f68c81846a5]
[   331.264] (EE) 6: /usr/lib64/libEGL_mesa.so.0 (0x7f68c816c000+0x15289) [0x7f68c8181289]
[   331.264] (EE) 7: /usr/lib64/libEGL_mesa.so.0 (0x7f68c816c000+0x153a9) [0x7f68c81813a9]
[   331.264] (EE) 8: /usr/lib64/libEGL_mesa.so.0 (eglInitialize+0x13a) [0x7f68c817c27a]
[   331.264] (EE) 9: /usr/lib64/xorg/modules/libglamoregl.so (glamor_egl_init+0x10b) [0x7f68c89027fb]
[   331.264] (EE) 10: /usr/lib64/xorg/modules/drivers/amdgpu_drv.so (0x7f68d246f000+0x181ab) [0x7f68d24871ab]
[   331.264] (EE) 11: /usr/lib64/xorg/modules/drivers/amdgpu_drv.so (0x7f68d246f000+0xf5a1) [0x7f68d247e5a1]
[   331.265] (EE) 12: /usr/bin/X (InitOutput+0xa3d) [0x5617bdea71cd]
[   331.265] (EE) 13: /usr/bin/X (0x5617bde0d000+0x57ff3) [0x5617bde64ff3]
[   331.265] (EE) 14: /lib64/libc.so.6 (__libc_start_main+0xea) [0x7f68d576af4a]
[   331.265] (EE) 15: /usr/bin/X (_start+0x2a) [0x5617bde4eeba]
[   331.265] (EE) 
[   331.265] (EE) Segmentation fault at address 0x20
[   331.265] (EE) 
[   331.265] (EE) Caught signal 11 (Segmentation fault). Server aborting
[   331.265] (EE) 
[   331.265] (EE) 
[   331.265] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   331.265] (EE) 
[   331.281] (EE) Server terminated with error (1). Closing log file.
dmesg | egrep -i "acpi|apic|err|warn|fail|fault|crit:

Code: Alles auswählen

[    0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf78dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf78e000-0x00000000bf7cffff] ACPI NVS
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FA410 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000BF780000 000048 (v01 ACRSYS ACRPRDCT 20110215 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BF780200 000084 (v01 ACRSYS FACP1606 20110215 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BF7805E0 0068E4 (v01 1AEIP  1AEIP012 00000012 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BF78E000 000040
[    0.000000] ACPI: APIC 0x00000000BF780390 00008C (v01 ACRSYS APIC1606 20110215 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BF780420 00003C (v01 ACRSYS OEMMCFG  20110215 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000BF780460 000176 (v01 ACRSYS ACRPRDCT 20110215 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BF78E040 000079 (v01 ACRSYS OEMB1606 20110215 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BF78A5E0 000038 (v01 ACRSYS OEMHPET  20110215 MSFT 00000097)
[    0.000000] ACPI: ASF! 0x00000000BF78A620 000099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
[    0.000000] ACPI: AWMI 0x00000000BF78E0C0 00004E (v01 ACRSYS OEMB1606 20110215 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BF790BE0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.004000] ACPI: Core revision 20170728
[    0.013857] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.020000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068026] core: CPU erratum AAJ80 worked around
[    0.396039] PM: Registering ACPI NVS region [mem 0xbf78e000-0xbf7cffff] (270336 bytes)
[    0.396486] ACPI: bus type PCI registered
[    0.396486] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.400060] ACPI: Added _OSI(Module Device)
[    0.400061] ACPI: Added _OSI(Processor Device)
[    0.400062] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.400063] ACPI: Added _OSI(Processor Aggregator Device)
[    0.400260] ACPI: Executed 1 blocks of module-level executable AML code
[    0.408089] ACPI: Dynamic OEM Table Load:
[    0.408101] ACPI: SSDT 0xFFFF93DD05F80000 00244C (v01 DpgPmm P001Ist  00000011 INTL 20051117)
[    0.408849] ACPI: Dynamic OEM Table Load:
[    0.408853] ACPI: SSDT 0xFFFF93DD05DF3000 000678 (v01 PmRef  P001Cst  00003001 INTL 20051117)
[    0.409618] ACPI: Interpreter enabled
[    0.409635] ACPI: (supports S0 S3 S4 S5)
[    0.409636] ACPI: Using IOAPIC for interrupt routing
[    0.409671] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.409671] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.409839] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.410081] ACPI: GPE 0x1B active on init
[    0.412001] ACPI: Enabled 15 GPEs in block 00 to 3F
[    0.419808] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.419813] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.420124] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.420410] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.420524] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000ce800-0x000d5bff])
[    0.448856] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.448931] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.449002] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.449075] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.449148] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.449221] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.449295] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.449368] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.452098] PCI: Using ACPI for IRQ routing
[    0.455487] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.471569] pnp: PnP ACPI init
[    0.471663] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.471736] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.471841] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.472085] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.472296] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.472421] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.472568] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.472652] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.472726] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.473010] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.473179] pnp: PnP ACPI: found 10 devices
[    0.479613] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    2.501388] intel_idle: lapic_timer_reliable_states 0x2
[    2.573191] RAS: Correctable Errors collector initialized.
[    4.795172] ACPI: bus type USB registered
[    5.804283] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2/input0
[    5.864249] cherry 0003:046A:0023.0002: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2/input1
[   12.872509] ACPI: Thermal Zone [THRM] (30 C)
[   13.006801] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170728/utaddress-247)
[   13.006806] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.024727] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   13.069928] ACPI: Power Button [PWRB]
[   13.070036] ACPI: Power Button [PWRF]
[   13.156716] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
[   13.291913] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
lsmod | egrep -i "amd|nouv":

Code: Alles auswählen

amdgpu               2277376  2
i2c_algo_bit           16384  1 amdgpu
drm_kms_helper        200704  1 amdgpu
ttm                   114688  1 amdgpu
drm                   434176  5 amdgpu,ttm,drm_kms_helper
Also scheint es ein Problem mit dem amdgpu bzw. nachladender Libs. zu geben.

spoensche
Moderator
Moderator
Beiträge: 7292
Registriert: 30. Okt 2004, 23:53
Wohnort: Siegen

Re: Tumbleweed und Radeon RX480 crash

Beitrag von spoensche » 30. Jan 2018, 21:03

Nicht mit dem amdgpu Driver. So weit kommt der X-Server beim starten nicht. Er stoppt schon vorher mit einem Segmentation Fault.

Sieh dir mal https://forums.opensuse.org/showthread. ... ce-4-14-13 an.

Manja
Newbie
Newbie
Beiträge: 15
Registriert: 21. Nov 2007, 20:36

Re: Tumbleweed und Radeon RX480 crash

Beitrag von Manja » 2. Feb 2018, 11:04

Hallo,
danke für die Hilfen, das fehlende Paket mesa-dri war es wohl.
Ich bin aber trotzdem auf Leap 42.3 umgestiegen.

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste