13.1-64 strange power saving mode

wschmock · 13 Jan. 2015

mein Klapprechner HP255 gibt öfter folgende Meldung von sich

Code:

Message from syslogd@knul at Jan 13 08:01:58 ... kernel:[13645.904837] Uhhuh. NMI received for unknown reason 3d on CPU 0. Message from syslogd@knul at Jan 13 08:01:58 ... kernel:[13645.904852] Do you have a strange power saving mode enabled? Message from syslogd@knul at Jan 13 08:01:58 ... kernel:[13645.904857] Dazed and confused, but trying to continue

ich habe da nichts eingeschaltet (enabled). wie kann man diesen Unsinn abschalten?

josef-wien · 13 Jan. 2015

Vielleicht durch ein BIOS-Update?

Was zeigt:

Code:

dmesg | egrep -i "err|warn|fail|fault|acpi|command"

wschmock · 13 Jan. 2015

Code:

knul:~ # dmesg | egrep -i "err|warn|fail|fault|acpi|command"
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-25-desktop root=UUID=b1476839-7fef-4c53-8e08-49756401555f showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
[    0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfabf000-0x00000000bfbbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfbbf000-0x00000000bfbfefff] ACPI data
[    0.000000] efi:  ACPI=0xbfbfe000  ACPI 2.0=0xbfbfe014  SMBIOS=0xbfabef98 
[    0.000000] MTRR default type: uncachable
[    0.000000] ACPI: RSDP 00000000bfbfe014 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 00000000bfbfe120 000A4 (v01 HPQOEM SLIC-MPC 00000001 HP   01000013)
[    0.000000] ACPI: FACP 00000000bfbfc000 0010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: DSDT 00000000bfbe8000 0FB70 (v01 HPQOEM 2191     F0000000 ACPI 00040000)
[    0.000000] ACPI: FACS 00000000bfb61000 00040
[    0.000000] ACPI: UEFI 00000000bfbfd000 001B6 (v01 HPQOEM 2191     00000001 HP   00040000)
[    0.000000] ACPI: HPET 00000000bfbfb000 00038 (v01 HPQOEM 2191     00000001 HP   00040000)
[    0.000000] ACPI: APIC 00000000bfbfa000 00090 (v03 HPQOEM 2191     00000001 HP   00040000)
[    0.000000] ACPI: MCFG 00000000bfbf9000 0003C (v01 HPQOEM 2191     00000001 HP   00040000)
[    0.000000] ACPI: ASF! 00000000bfbf8000 000A5 (v32 HPQOEM 2191     00000001 HP   00040000)
[    0.000000] ACPI: BOOT 00000000bfbe7000 00028 (v01 HPQOEM 2191     00000001 HP   00040000)
[    0.000000] ACPI: FPDT 00000000bfbe5000 00044 (v01 HPQOEM 2191     00000001 HP   00040000)
[    0.000000] ACPI: SSDT 00000000bfbe3000 0096C (v01 HPQOEM 2191     00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bfbde000 046B7 (v02 HPQOEM 2191     00000002 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bfbdc000 01482 (v01 HPQOEM 2191     00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bfbdb000 0008C (v01 HPQOEM 2191     00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bfbda000 00662 (v01 HPQOEM 2191     00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bfbd9000 00D1E (v01 HPQOEM 2191     00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 00000000bfbd7000 010C2 (v01 HPQOEM 2191     00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 00000000bfbd6000 00038 (v01 HPQOEM 2191     00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-25-desktop root=UUID=b1476839-7fef-4c53-8e08-49756401555f showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
[    0.000018] pid_max: default: 32768 minimum: 301
[    0.028937] ACPI: Core revision 20130517
[    0.065996] ACPI: All ACPI Tables successfully acquired
[    0.252320] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[    0.252333] PM: Registering ACPI NVS region [mem 0xbfabf000-0xbfbbefff] (1048576 bytes)
[    0.253259] ACPI: bus type PCI registered
[    0.253269] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.263670] ACPI: Added _OSI(Module Device)
[    0.263678] ACPI: Added _OSI(Processor Device)
[    0.263685] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.263693] ACPI: Added _OSI(Processor Aggregator Device)
[    0.268028] ACPI: EC: Look up EC in DSDT
[    0.272745] ACPI: Executed 1 blocks of module-level executable AML code
[    0.292024] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.117032] ACPI: Interpreter enabled
[    1.117065] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    1.117088] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    1.117141] ACPI: (supports S0 S3 S4 S5)
[    1.117150] ACPI: Using IOAPIC for interrupt routing
[    1.118053] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.118600] ACPI: No dock devices found.
[    1.121737] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.121789] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.164565] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.165460] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    1.166332] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x09
[    1.166343] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.167292] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[    1.167312] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    1.169371] pci 0000:00:02.3: System wakeup disabled by ACPI
[    1.170042] pci 0000:00:10.0: System wakeup disabled by ACPI
[    1.170679] pci 0000:00:12.0: System wakeup disabled by ACPI
[    1.171004] pci 0000:00:12.2: System wakeup disabled by ACPI
[    1.171283] pci 0000:00:13.0: System wakeup disabled by ACPI
[    1.171614] pci 0000:00:13.2: System wakeup disabled by ACPI
[    1.175867] pci 0000:02:00.0: System wakeup disabled by ACPI
[    1.185591] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.185921] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.186264] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.186614] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.186903] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.187118] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.187341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.187555] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    1.188596] ACPI: Enabled 2 GPEs in block 00 to 1F
[    1.188617] ACPI: \_SB_.PCI0: notify handler is installed
[    1.188794] Found 1 acpi root devices
[    1.188959] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    1.189469] ACPI: bus type ATA registered
[    1.189632] ACPI: bus type USB registered
[    1.189963] PCI: Using ACPI for IRQ routing
[    1.192274] NetLabel:  unlabeled traffic allowed by default
[    1.199263] pnp: PnP ACPI init
[    1.199297] ACPI: bus type PNP registered
[    1.199786] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.200215] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.200436] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.200510] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.200671] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.200742] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.200970] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.201250] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.201494] pnp 00:08: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    1.201576] pnp 00:09: Plug and Play ACPI device, IDs SYN1ea0 PNP0f13 (active)
[    1.207282] pnp: PnP ACPI: found 10 devices
[    1.207290] ACPI: bus type PNP unregistered
[    1.345846] PCI: CLS 64 bytes, default 64
[    1.874572] io scheduler cfq registered (default)
[    2.705539] ACPI: processor limited to max C-state 1
[    2.713370] ACPI: Thermal Zone [TSZ0] (31 C)
[    3.693463] microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
[    8.314866] systemd[1]: Starting LSB: Set default boot entry if called...
[   10.468228] ACPI: Lid Switch [LID]
[   10.473365] ACPI: Power Button [PWRB]
[   10.478399] ACPI: Power Button [PWRF]
[   10.486761] ACPI: \_SB_.PCI0: ACPI_NOTIFY_BUS_CHECK event: unsupported
[   10.486784] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[   10.486796] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   10.490086] ACPI: AC Adapter [AC] (on-line)
[   10.539356] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   10.541996] ACPI: Battery Slot [BAT0] (battery absent)
[   10.557813] acpi device:01: registered as cooling_device4
[   10.560556] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   10.652663] acpi-cpufreq: overriding BIOS provided _PSD data
[   10.856725] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20130517/utaddress-251)
[   10.861675] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[   11.723915] ALSA patch_realtek.c:427 SKU: override=0x1
[   17.301610] type=1400 audit(1421118886.736:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=539 comm="apparmor_parser"
[ 5529.893180] warning: `growisofs' uses 32-bit capabilities (legacy support in use)
[ 5608.206373] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
knul:~ #

der Rechner wirtd dringend gebraucht, keine Zeit langwierrige Expermente, BIOS update, usw, wo womöglich noch mehr nicht geht

josef-wien · 13 Jan. 2015

Du verwendest den Failsafe-Start (oder abgesicherten Modus oder wie immer das Ding in Deinem Boot-Menü heißt), hier sind verschiedene Funktionen deaktiviert und daher eine Fehlersuche nicht sinnvoll. Wenn der normale Start Probleme verursacht, müssen diese zuerst gelöst werden, mit dem Failsafe-Start steckst Du den Kopf bloß in den Sand.

Sauerland · 13 Jan. 2015

Und warum startest Du im failsafe?

[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-25-desktop root=UUID=b1476839-7fef-4c53-8e08-49756401555f showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe

Da ist ja fast alles ausgeschaltet.........

wschmock · 14 Jan. 2015

im normal-modus startet der Rechner nicht, mit failsave kann ich meine notwendigen Arbeiien am Rechner erledigen.
siehe

Code:

http://forum.linux-club.de/viewtopic.php?f=89&t=119898#p762306

13.1-64 strange power saving mode

wschmock

Hacker

josef-wien

Ultimate Guru

wschmock

Hacker

josef-wien

Ultimate Guru

Sauerland

Ultimate Guru

wschmock

Hacker