• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Problem mit updates 13,1-64

W

wschmock

Hacker
heute morgen (28.12.2014) habe ich
zypper up
Zum Vergrößern anklicken....
ausgeführt, und nach dem empfolenen Neustart startet KDM nicht. Fehlermeldung:
Code: 
amd_ucode/microcode_amd_fam16h.bin not found
es existiert nur
Code: 
microcode_amd_fam15h.bin
wenn bei einem update so ertwas passiert empfinde ich das als Sabotage. das ist nicht das erste Problem mit den updates. vor kurzem gab es ein update zu cupsd. setdem funktioniert mein Drucker/Scanner nicht mehr (Brother DCP195C). ich hab auf diesem Rechner (64bit) das Linux 13.1 drei mal installiert, so da ich noch was machen kann. zum Drucken und Scannen muss ich jetzt meinen über 10 Jahre alten Laptop mit Windows XP nehmen. neue Linux Versionen laseen sich darauf nicht mehr installieren. lassen sich denn für die updates keine kompenten MItarbeiter mehr finden ?
 
S

Sauerland

Ultimate Guru
Übrigens gab es gestern bei openSUSE 13.2 ein X11 Update, da kann es sein, das man den Grafikkartentreiber neu installieren muss. War evtl. bei 13.1 auch so?
 
H

Hazel

Hacker
Hallo

Sauerland schrieb:
Übrigens gab es gestern bei openSUSE 13.2 ein X11 Update, da kann es sein, das man den Grafikkartentreiber neu installieren muss. War evtl. bei 13.1 auch so?
Zum Vergrößern anklicken....
Nein, denn bei der 13.1 stammt
  • der letzte Treiber vom 15. Dez. 2014
  • der letzte xorg-x11-server vom 18. Dez. 2014
beides aus der Angabe unter "Build Date" entnommen.

Grüße
Hazel
 
S

Sauerland

Ultimate Guru
Nein, denn bei der 13.1 stammt

der letzte Treiber vom 15. Dez. 2014
der letzte xorg-x11-server vom 18. Dez. 2014
Zum Vergrößern anklicken....

Der stammt vom 27.12.2014:
http://download.opensuse.org/update/13.1/x86_64/xorg-x11-server-7.6_1.14.3.901-12.1.x86_64.rpm
 
OP
W

wschmock

Hacker
offensichtlich kennt niemand eine Lösung des Problems. im Internet findet man viel zu dem Problem mit angeblichen Lösungen. ich hab da viele Stunden mit probiert, alles nur Zeitverschwendung. funktioniert Linux in Zukunft nur noch mit Geräten (Hardware) welche die Programm-(Software) Schreiber selber haben ?
 
J

josef-wien

Ultimate Guru
Deine einzige Fehlermeldung betrifft einen fehlenden Microcode, den es laut AMD nicht gibt. Ein Zusammenhang mit Deinen Problemen ist eher unwahrscheinlich, da die damit temporär vorgenommenen Korrekturen der in jeder CPU enthaltenen Fehler eher nur für sehr spezielle Situationen erforderlich sind.

Ansonsten lese ich nur Prosa ohne Informationsgehalt, und daher kann Dir niemand helfen.
 
OP
W

wschmock

Hacker
was es nicht gibt kann auch nicht fehlen ! man hat folglich in das update etwas progammiert was es nicht gibt. sehr aufschlussreich.
 
J

josef-wien

Ultimate Guru
Außerdem Informationen zur Hardware:
Code: 
/usr/sbin/hwinfo --cpu --gfx
P. S.
wschmock schrieb:
was es nicht gibt kann auch nicht fehlen
Zum Vergrößern anklicken....
Wenn AMD etwas nicht bereitstellt, ist es korrekt von Linux, darauf hinzuweisen (vor Deinem update hast Du die Meldung nicht beachtet).
 
OP
W

wschmock

Hacker
Code: 
knul:~ # grep 2014-12-28 /var/log/zypp/history
2014-12-28 05:22:40|install|file-magic|5.15-4.28.1|x86_64||download.opensuse.org-update|ce14a89b5343a4222b60ea4c9dd1d211a57962e9c56d3ce0bdfd283377cd01b1|
2014-12-28 05:22:41|install|libmagic1-32bit|5.15-4.28.1|x86_64||download.opensuse.org-update|0817a02a5431f7a344bd10e0fb387b02eb15b1c4c3785804665e0b16a65d181e|
2014-12-28 05:22:49|install|mailx|12.5-14.4.1|x86_64||download.opensuse.org-update|c8434fedbe4b3cf4e7ce539f2780a95cb49c5a5f9350c106ac5dd0e4ceaa174a|
# 2014-12-28 05:22:53 xorg-x11-server-7.6_1.14.3.901-12.1.x86_64.rpm installed ok
2014-12-28 05:22:53|install|xorg-x11-server|7.6_1.14.3.901-12.1|x86_64||download.opensuse.org-update|8d953595077882cd627f34a81460e638562e9c095abd11c1a815f27ed6a7f0d3|
2014-12-28 05:22:53|install|libmagic1|5.15-4.28.1|x86_64||download.opensuse.org-update|c18b5460a2a181e7edd74a946c2e2a45ca81f4c2e59bfad174e3d3eeda795f95|
2014-12-28 05:22:54|install|rpm-32bit|4.11.1-6.9.1|x86_64||download.opensuse.org-update|58e7976ee61f01ae979da445e3517e8367d21658b3cd5d7a4eb4f14ffff1d764|
# 2014-12-28 05:22:58 rpm-4.11.1-6.9.1.x86_64.rpm installed ok
2014-12-28 05:22:58|install|rpm|4.11.1-6.9.1|x86_64||download.opensuse.org-update|cb3155bd962e24164540ec94a5f21faddef75ccc492a2aa90dd312cbbf3c907e|
2014-12-28 05:22:59|install|file|5.15-4.28.1|x86_64||download.opensuse.org-update|d6f934ff09e8916e16d3e52865aec8fa77cf35d7c15730a8663dcbdbe85d958d|
2014-12-28 05:23:00|install|rpm-python|4.11.1-6.9.1|x86_64||download.opensuse.org-update|b3c80c1a07347d059ef9fa41b527ed4bdf9f36c7449673754c1d8ff21d2a4eec|
knul:~ #
Code: 
knul:~ # /usr/sbin/hwinfo --cpu --gfx
08: None 00.0: 10103 CPU                                        
  [Created at cpu.446]
  Unique ID: rdCR.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: X86-64
  Vendor: "AuthenticAMD"
  Model: 22.0.1 "AMD E2-3800 APU with Radeon(TM) HD Graphics"
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,eagerfpu,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,movbe,popcnt,aes,xsave,avx,f16c,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,topoext,perfctr_nb,perfctr_l2,arat,xsaveopt,hw_pstate,proc_feedback,npt,lbrv,svm_lock,nrip_save,tsc_scale,flushbyasid,decodeassists,pausefilter,pfthreshold,bmi1
  Clock: 800 MHz
  BogoMips: 2595.19
  Cache: 2048 kb
  Units/Processor: 4
  Config Status: cfg=no, avail=yes, need=no, active=unknown

09: None 01.0: 10103 CPU
  [Created at cpu.446]
  Unique ID: wkFv.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: X86-64
  Vendor: "AuthenticAMD"
  Model: 22.0.1 "AMD E2-3800 APU with Radeon(TM) HD Graphics    "
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,eagerfpu,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,movbe,popcnt,aes,xsave,avx,f16c,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,topoext,perfctr_nb,perfctr_l2,arat,xsaveopt,hw_pstate,proc_feedback,npt,lbrv,svm_lock,nrip_save,tsc_scale,flushbyasid,decodeassists,pausefilter,pfthreshold,bmi1
  Clock: 800 MHz
  BogoMips: 2595.19
  Cache: 2048 kb
  Units/Processor: 4
  Config Status: cfg=no, avail=yes, need=no, active=unknown

10: None 02.0: 10103 CPU
  [Created at cpu.446]
  Unique ID: +rIN.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: X86-64
  Vendor: "AuthenticAMD"
  Model: 22.0.1 "AMD E2-3800 APU with Radeon(TM) HD Graphics    "
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,eagerfpu,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,movbe,popcnt,aes,xsave,avx,f16c,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,topoext,perfctr_nb,perfctr_l2,arat,xsaveopt,hw_pstate,proc_feedback,npt,lbrv,svm_lock,nrip_save,tsc_scale,flushbyasid,decodeassists,pausefilter,pfthreshold,bmi1
  Clock: 800 MHz
  BogoMips: 2595.19
  Cache: 2048 kb
  Units/Processor: 4
  Config Status: cfg=no, avail=yes, need=no, active=unknown

11: None 03.0: 10103 CPU
  [Created at cpu.446]
  Unique ID: 4zLr.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: X86-64
  Vendor: "AuthenticAMD"
  Model: 22.0.1 "AMD E2-3800 APU with Radeon(TM) HD Graphics    "
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,eagerfpu,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,movbe,popcnt,aes,xsave,avx,f16c,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,topoext,perfctr_nb,perfctr_l2,arat,xsaveopt,hw_pstate,proc_feedback,npt,lbrv,svm_lock,nrip_save,tsc_scale,flushbyasid,decodeassists,pausefilter,pfthreshold,bmi1
  Clock: 800 MHz
  BogoMips: 2595.19
  Cache: 2048 kb
  Units/Processor: 4
  Config Status: cfg=no, avail=yes, need=no, active=unknown

13: PCI 01.0: 0300 VGA compatible controller (VGA)
  [Created at pci.319]
  Unique ID: vSkL.EtRaw2exHUE
  SysFS ID: /devices/pci0000:00/0000:00:01.0
  SysFS BusID: 0000:00:01.0
  Hardware Class: graphics card
  Model: "ATI VGA compatible controller"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x9836 
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x2192 
  Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
  Memory Range: 0xf0000000-0xf07fffff (ro,non-prefetchable)
  I/O Ports: 0x3000-0x30ff (rw)
  Memory Range: 0xf0c00000-0xf0c3ffff (rw,non-prefetchable)
  Memory Range: 0xf0c60000-0xf0c7ffff (ro,non-prefetchable,disabled)
  IRQ: 3 (no events)
  Module Alias: "pci:v00001002d00009836sv0000103Csd00002192bc03sc00i00"
  Driver Info #0:
    Driver Status: radeon is not active
    Driver Activation Cmd: "modprobe radeon"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
knul:~ #
und was nun ?
Wenn AMD etwas nicht bereitstellt, ist es korrekt von Linux, darauf hinzuweisen
Zum Vergrößern anklicken....
wernn etwas nicht bereit gestellt wird allso nicht vorhanden ist und es von den Programmierern trotzdem in den Linux-Code intrgriert wird ist das absichtliche Sabotage !
 
S

Sauerland

Ultimate Guru
wernn etwas nicht bereit gestellt wird allso nicht vorhanden ist und es von den Programmierern trotzdem in den Linux-Code intrgriert wird ist das absichtliche Sabotage !
Zum Vergrößern anklicken....
Das ist Blödsinn und hat mit deinem Problem nichts zu tun.

Starte den Rechner nicht im failsafe sondern normal im Init 3 und poste dann die Ergebnisse von
Code: 
tail -n 40 /var/log/messages

Und welcher Treiber läuft mit der Radeon-Grafikkarte?
Poste dann einmal:
Code: 
grep -E 'EE|WW|II' /var/log/Xorg.0.log
 
J

josef-wien

Ultimate Guru
Vor der Auswertung der Xorg.0.log muß zuerst das System ganz normal gestartet werden. Wir brauchen keine Datei, die von einem Failsafe-Start stammt, daher erweitere ich den Befehl auf:
Code: 
grep -E 'EE|WW|II|command' /var/log/Xorg.0.log
P. S. Wegen Deiner Befindlichkeit werden die Kernel-Entwickler nicht eine Warn-Meldung weglassen, wenn es zu den von Deiner CPU gemeldeten Informationen Processor Signature und Processor Revision ID keinen Microcode gibt.
 
OP
W

wschmock

Hacker
ich habe eigentlich keine Zeit für derartig aufwendige Tests. die Befehle habe ich eine Datei kopiert:
Code: 
#!/bin/sh
grep 2014-12-28 /var/log/zypp/history >at
/usr/sbin/hwinfo --cpu --gfx >>at
tail -n 40 /var/log/messages >>at
grep -E 'EE|WW|II' /var/log/Xorg.0.log >>at
tail -n 40 /var/log/messages >>at
grep -E 'EE|WW|II|command' /var/log/Xorg.0.log >>at
hier das Ergebnis:
Code: 
2014-12-28 05:22:40|install|file-magic|5.15-4.28.1|x86_64||download.opensuse.org-update|ce14a89b5343a4222b60ea4c9dd1d211a57962e9c56d3ce0bdfd283377cd01b1|
2014-12-28 05:22:41|install|libmagic1-32bit|5.15-4.28.1|x86_64||download.opensuse.org-update|0817a02a5431f7a344bd10e0fb387b02eb15b1c4c3785804665e0b16a65d181e|
2014-12-28 05:22:49|install|mailx|12.5-14.4.1|x86_64||download.opensuse.org-update|c8434fedbe4b3cf4e7ce539f2780a95cb49c5a5f9350c106ac5dd0e4ceaa174a|
# 2014-12-28 05:22:53 xorg-x11-server-7.6_1.14.3.901-12.1.x86_64.rpm installed ok
2014-12-28 05:22:53|install|xorg-x11-server|7.6_1.14.3.901-12.1|x86_64||download.opensuse.org-update|8d953595077882cd627f34a81460e638562e9c095abd11c1a815f27ed6a7f0d3|
2014-12-28 05:22:53|install|libmagic1|5.15-4.28.1|x86_64||download.opensuse.org-update|c18b5460a2a181e7edd74a946c2e2a45ca81f4c2e59bfad174e3d3eeda795f95|
2014-12-28 05:22:54|install|rpm-32bit|4.11.1-6.9.1|x86_64||download.opensuse.org-update|58e7976ee61f01ae979da445e3517e8367d21658b3cd5d7a4eb4f14ffff1d764|
# 2014-12-28 05:22:58 rpm-4.11.1-6.9.1.x86_64.rpm installed ok
2014-12-28 05:22:58|install|rpm|4.11.1-6.9.1|x86_64||download.opensuse.org-update|cb3155bd962e24164540ec94a5f21faddef75ccc492a2aa90dd312cbbf3c907e|
2014-12-28 05:22:59|install|file|5.15-4.28.1|x86_64||download.opensuse.org-update|d6f934ff09e8916e16d3e52865aec8fa77cf35d7c15730a8663dcbdbe85d958d|
2014-12-28 05:23:00|install|rpm-python|4.11.1-6.9.1|x86_64||download.opensuse.org-update|b3c80c1a07347d059ef9fa41b527ed4bdf9f36c7449673754c1d8ff21d2a4eec|
08: None 00.0: 10103 CPU
  [Created at cpu.446]
  Unique ID: rdCR.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: X86-64
  Vendor: "AuthenticAMD"
  Model: 22.0.1 "AMD E2-3800 APU with Radeon(TM) HD Graphics"
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,eagerfpu,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,movbe,popcnt,aes,xsave,avx,f16c,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,topoext,perfctr_nb,perfctr_l2,arat,xsaveopt,hw_pstate,proc_feedback,npt,lbrv,svm_lock,nrip_save,tsc_scale,flushbyasid,decodeassists,pausefilter,pfthreshold,bmi1
  Clock: 800 MHz
  BogoMips: 2595.29
  Cache: 2048 kb
  Units/Processor: 4
  Config Status: cfg=no, avail=yes, need=no, active=unknown

09: None 01.0: 10103 CPU
  [Created at cpu.446]
  Unique ID: wkFv.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: X86-64
  Vendor: "AuthenticAMD"
  Model: 22.0.1 "AMD E2-3800 APU with Radeon(TM) HD Graphics    "
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,eagerfpu,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,movbe,popcnt,aes,xsave,avx,f16c,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,topoext,perfctr_nb,perfctr_l2,arat,xsaveopt,hw_pstate,proc_feedback,npt,lbrv,svm_lock,nrip_save,tsc_scale,flushbyasid,decodeassists,pausefilter,pfthreshold,bmi1
  Clock: 800 MHz
  BogoMips: 2595.29
  Cache: 2048 kb
  Units/Processor: 4
  Config Status: cfg=no, avail=yes, need=no, active=unknown

10: None 02.0: 10103 CPU
  [Created at cpu.446]
  Unique ID: +rIN.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: X86-64
  Vendor: "AuthenticAMD"
  Model: 22.0.1 "AMD E2-3800 APU with Radeon(TM) HD Graphics    "
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,eagerfpu,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,movbe,popcnt,aes,xsave,avx,f16c,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,topoext,perfctr_nb,perfctr_l2,arat,xsaveopt,hw_pstate,proc_feedback,npt,lbrv,svm_lock,nrip_save,tsc_scale,flushbyasid,decodeassists,pausefilter,pfthreshold,bmi1
  Clock: 800 MHz
  BogoMips: 2595.29
  Cache: 2048 kb
  Units/Processor: 4
  Config Status: cfg=no, avail=yes, need=no, active=unknown

11: None 03.0: 10103 CPU
  [Created at cpu.446]
  Unique ID: 4zLr.j8NaKXDZtZ6
  Hardware Class: cpu
  Arch: X86-64
  Vendor: "AuthenticAMD"
  Model: 22.0.1 "AMD E2-3800 APU with Radeon(TM) HD Graphics    "
  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,aperfmperf,eagerfpu,pni,pclmulqdq,monitor,ssse3,cx16,sse4_1,sse4_2,movbe,popcnt,aes,xsave,avx,f16c,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,topoext,perfctr_nb,perfctr_l2,arat,xsaveopt,hw_pstate,proc_feedback,npt,lbrv,svm_lock,nrip_save,tsc_scale,flushbyasid,decodeassists,pausefilter,pfthreshold,bmi1
  Clock: 800 MHz
  BogoMips: 2595.29
  Cache: 2048 kb
  Units/Processor: 4
  Config Status: cfg=no, avail=yes, need=no, active=unknown

13: PCI 01.0: 0300 VGA compatible controller (VGA)
  [Created at pci.319]
  Unique ID: vSkL.EtRaw2exHUE
  SysFS ID: /devices/pci0000:00/0000:00:01.0
  SysFS BusID: 0000:00:01.0
  Hardware Class: graphics card
  Model: "ATI VGA compatible controller"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x9836 
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x2192 
  Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
  Memory Range: 0xf0000000-0xf07fffff (ro,non-prefetchable)
  I/O Ports: 0x3000-0x30ff (rw)
  Memory Range: 0xf0c00000-0xf0c3ffff (rw,non-prefetchable)
  Memory Range: 0xf0c60000-0xf0c7ffff (ro,non-prefetchable,disabled)
  IRQ: 3 (no events)
  Module Alias: "pci:v00001002d00009836sv0000103Csd00002192bc03sc00i00"
  Driver Info #0:
    Driver Status: radeon is not active
    Driver Activation Cmd: "modprobe radeon"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
2015-01-16T07:40:22.898277+01:00 knul systemd: pam_unix(systemd-user:session): session opened for user root by (uid=0)
2015-01-16T07:40:22.903150+01:00 knul systemd[1]: Starting Session 1 of user root.
2015-01-16T07:40:22.904204+01:00 knul systemd[1132]: Failed to open private bus connection: Failed to connect to socket /run/user/0/dbus/user_bus_socket: No such file or directory
2015-01-16T07:40:22.905364+01:00 knul systemd[1]: Started Session 1 of user root.
2015-01-16T07:40:23.091757+01:00 knul systemd[1132]: Stopped target Bluetooth.
2015-01-16T07:40:23.092608+01:00 knul systemd[1132]: Stopped target Sound Card.
2015-01-16T07:40:23.094188+01:00 knul systemd[1132]: Starting Default.
2015-01-16T07:40:23.095012+01:00 knul systemd[1132]: Reached target Default.
2015-01-16T07:40:23.095734+01:00 knul systemd[1132]: Startup finished in 189ms.
2015-01-16T07:40:23.096667+01:00 knul systemd[1]: Started User Manager for 0.
2015-01-16T07:40:23.130884+01:00 knul login: ROOT LOGIN ON tty1
2015-01-16T07:40:29.185906+01:00 knul clamd[651]: Starting Clam AntiVirus daemon ..done
2015-01-16T07:40:29.186437+01:00 knul systemd[1]: Started LSB: virus scanner daemon.
2015-01-16T07:40:29.187437+01:00 knul systemd[1]: Starting LSB: milter compatible mail scanner...
2015-01-16T07:40:29.233559+01:00 knul clamav-milter[1199]: Starting clamav-milter ..done
2015-01-16T07:40:29.235398+01:00 knul systemd[1]: Started LSB: milter compatible mail scanner.
2015-01-16T07:40:29.236911+01:00 knul systemd[1]: Starting Multi-User System.
2015-01-16T07:40:29.239388+01:00 knul systemd[1]: Reached target Multi-User System.
2015-01-16T07:40:29.241232+01:00 knul systemd[1]: Starting Graphical Interface.
2015-01-16T07:40:29.243241+01:00 knul systemd[1]: Reached target Graphical Interface.
2015-01-16T07:40:29.244854+01:00 knul systemd[1]: Starting Stop Read-Ahead Data Collection 10s After Completed Startup.
2015-01-16T07:40:29.246538+01:00 knul systemd[1]: Started Stop Read-Ahead Data Collection 10s After Completed Startup.
2015-01-16T07:40:29.248354+01:00 knul systemd[1]: Starting Update UTMP about System Runlevel Changes...
2015-01-16T07:40:29.251872+01:00 knul systemd[1]: Started Update UTMP about System Runlevel Changes.
2015-01-16T07:40:29.253444+01:00 knul systemd[1]: Startup finished in 6.222s (kernel) + 50.720s (userspace) = 1min 9.631s.
2015-01-16T07:40:54.804859+01:00 knul systemd[1]: Starting Getty on tty2...
2015-01-16T07:40:54.807651+01:00 knul systemd[1]: Started Getty on tty2.
2015-01-16T07:40:59.237229+01:00 knul systemd[1]: Starting Stop Read-Ahead Data Collection...
2015-01-16T07:40:59.244386+01:00 knul systemd[1]: Started Stop Read-Ahead Data Collection.
2015-01-16T07:41:03.710641+01:00 knul login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
2015-01-16T07:41:03.715540+01:00 knul systemd[1]: Starting Session 2 of user root.
2015-01-16T07:41:03.716536+01:00 knul systemd-logind[677]: New session 2 of user root.
2015-01-16T07:41:03.717293+01:00 knul systemd[1]: Started Session 2 of user root.
2015-01-16T07:41:03.721999+01:00 knul login: ROOT LOGIN ON tty2
2015-01-16T07:45:01.642734+01:00 knul /usr/sbin/cron[1283]: pam_unix(crond:session): session opened for user root by (uid=0)
2015-01-16T07:45:01.649305+01:00 knul systemd[1]: Starting Session 3 of user root.
2015-01-16T07:45:01.651542+01:00 knul systemd[1]: Started Session 3 of user root.
2015-01-16T07:45:01.848627+01:00 knul /USR/SBIN/CRON[1283]: pam_unix(crond:session): session closed for user root
2015-01-16T07:54:32.311439+01:00 knul systemd[1]: Starting Cleanup of Temporary Directories...
2015-01-16T07:54:32.640671+01:00 knul systemd[1]: Started Cleanup of Temporary Directories.
[    21.871] Current Operating System: Linux knul 3.11.10-25-desktop #1 SMP PREEMPT Wed Dec 17 17:57:03 UTC 2014 (8210f77) x86_64
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.952] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    21.996] (II) The server relies on udev to provide the list of input devices.
[    21.996] (II) Loader magic: 0x804c20
[    21.996] (II) Module ABI versions:
[    22.000] Initializing built-in extension MIT-SCREEN-SAVER
[    22.000] (II) "glx" will be loaded by default.
[    22.000] (II) LoadModule: "dri2"
[    22.000] (II) Module "dri2" already built-in
[    22.000] (II) LoadModule: "glamoregl"
[    22.358] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[    22.362] (EE) Failed to load /usr/lib64/xorg/modules/libglamoregl.so: /usr/lib64/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context
[    22.362] (II) UnloadModule: "glamoregl"
[    22.362] (II) Unloading glamoregl
[    22.362] (EE) Failed to load module "glamoregl" (loader failed, 7)
[    22.362] (II) LoadModule: "glx"
[    22.375] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    22.375] (II) Module glx: vendor="X.Org Foundation"
[    22.375] (II) LoadModule: "fglrx"
[    22.376] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[    24.912] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    27.681] (II) Loading sub module "fglrxdrm"
[    27.681] (II) LoadModule: "fglrxdrm"
[    27.682] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    28.204] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    28.204] (II) LoadModule: "ati"
[    28.205] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[    28.224] (II) Module ati: vendor="X.Org Foundation"
[    28.224] (II) LoadModule: "radeon"
[    28.226] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[    28.276] (II) Module radeon: vendor="X.Org Foundation"
[    28.276] (II) LoadModule: "modesetting"
[    28.277] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[    28.277] (II) Module modesetting: vendor="X.Org Foundation"
[    28.278] (II) LoadModule: "fbdev"
[    28.279] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[    28.279] (II) Module fbdev: vendor="X.Org Foundation"
[    28.279] (II) LoadModule: "vesa"
[    28.280] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    28.280] (II) Module vesa: vendor="X.Org Foundation"
[    28.281] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[    28.281] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10.1006.1001          
[    28.281] (II) AMD Proprietary Linux Driver Build Date: May  5 2014 21:38:38
[    28.281] (II) RADEON: Driver for ATI Radeon chipsets:
[    28.297] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    28.297] (II) FBDEV: driver for framebuffer: fbdev
[    28.297] (II) VESA: driver for VESA chipsets: vesa
[    28.298] (WW) Falling back to old probe method for fglrx
[    29.323] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    29.512] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[    29.513] (II) fglrx(0): pEnt->device->identifier=0x5a28af
[    29.513] (WW) Falling back to old probe method for modesetting
[    29.513] (EE) open /dev/dri/card0: No such file or directory
[    29.513] (WW) Falling back to old probe method for fbdev
[    29.514] (II) Loading sub module "fbdevhw"
[    29.514] (II) LoadModule: "fbdevhw"
[    29.514] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    29.515] (II) Module fbdevhw: vendor="X.Org Foundation"
[    29.515] (WW) Falling back to old probe method for vesa
[    29.515] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[    29.516] (II) Loading sub module "vgahw"
[    29.516] (II) LoadModule: "vgahw"
[    29.517] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[    29.606] (II) Module vgahw: vendor="X.Org Foundation"
[    29.607] (II) fglrx(0): Creating default Display subsection in Screen section
[    29.607] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    29.607] (II) fglrx(0): Using 8 bits per RGB 
[    29.624] (II) Loading sub module "fglrxdrm"
[    29.624] (II) LoadModule: "fglrxdrm"
[    29.625] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    29.625] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    30.628] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    30.654] (II) Loading sub module "vbe"
[    30.654] (II) LoadModule: "vbe"
[    30.655] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[    30.698] (II) Module vbe: vendor="X.Org Foundation"
[    30.748] (II) fglrx(0): VESA BIOS detected
[    30.748] (II) fglrx(0): VESA VBE Version 3.0
[    30.748] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    30.748] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[    30.748] (II) fglrx(0): VESA VBE OEM Software Rev: 15.33
[    30.749] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[    30.749] (II) fglrx(0): VESA VBE OEM Product: KALINDI
[    30.749] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    30.769] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    30.770] (II) fglrx(0): PCIE card detected
[    30.770] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    30.770] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    30.770] (II) fglrx(0): RandR 1.2 support is enabled!
[    30.770] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    30.770] (II) Loading sub module "fb"
[    30.770] (II) LoadModule: "fb"
[    30.771] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    30.771] (II) Module fb: vendor="X.Org Foundation"
[    30.771] (II) fglrx(0): EDID Management option: EDID Management is enabled
[    30.771] (II) Loading sub module "ddc"
[    30.771] (II) LoadModule: "ddc"
[    30.771] (II) Module "ddc" already built-in
[    32.902] (II) fglrx(0): Output LVDS has no monitor section
[    32.902] (II) fglrx(0): Output DFP1 has no monitor section
[    32.902] (II) fglrx(0): Output CRT1 has no monitor section
[    32.902] (II) Loading sub module "ddc"
[    32.902] (II) LoadModule: "ddc"
[    32.902] (II) Module "ddc" already built-in
[    32.902] (II) fglrx(0): Connected Display0: LVDS
[    32.902] (II) fglrx(0): Display0 EDID data ---------------------------
[    32.902] (II) fglrx(0): Manufacturer: LGD  Model: 395  Serial#: 0
[    32.902] (II) fglrx(0): Year: 2012  Week: 0
[    32.902] (II) fglrx(0): EDID Version: 1.4
[    32.902] (II) fglrx(0): Digital Display Input
[    32.902] (II) fglrx(0): 6 bits per channel
[    32.902] (II) fglrx(0): Digital interface is undefined
[    32.902] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    32.902] (II) fglrx(0): Gamma: 2.20
[    32.902] (II) fglrx(0): No DPMS capabilities specified
[    32.903] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    32.903] (II) fglrx(0): First detailed timing is preferred mode
[    32.903] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[    32.903] (II) fglrx(0): redX: 0.609 redY: 0.348   greenX: 0.352 greenY: 0.606
[    32.903] (II) fglrx(0): blueX: 0.150 blueY: 0.096   whiteX: 0.313 whiteY: 0.329
[    32.903] (II) fglrx(0): Manufacturer's mask: 0
[    32.903] (II) fglrx(0): Supported detailed timing:
[    32.903] (II) fglrx(0): clock: 76.4 MHz   Image Size:  344 x 194 mm
[    32.903] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[    32.903] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    32.903] (II) fglrx(0): Supported detailed timing:
[    32.903] (II) fglrx(0): clock: 50.9 MHz   Image Size:  344 x 194 mm
[    32.903] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[    32.903] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    32.903] (II) fglrx(0): Unknown vendor-specific block 2
[    32.903] (II) fglrx(0): EDID (in hex):
[    32.903] (II) fglrx(0): 	00ffffffffffff0030e4950300000000
[    32.903] (II) fglrx(0): 	00160104902213780a01a59c595a9b26
[    32.903] (II) fglrx(0): 	18505400000001010101010101010101
[    32.903] (II) fglrx(0): 	010101010101d81d56f4500016302430
[    32.903] (II) fglrx(0): 	350058c21000001be51356f450001630
[    32.903] (II) fglrx(0): 	2430350058c21000001b000000000000
[    32.903] (II) fglrx(0): 	00000000000000000000000000000002
[    32.903] (II) fglrx(0): 	000c47ff0a3c6412222964000000006e
[    32.903] (II) fglrx(0): End of Display0 EDID data --------------------
[    32.903] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[    32.905] (II) fglrx(0): EDID for output LVDS
[    32.905] (II) fglrx(0): Manufacturer: LGD  Model: 395  Serial#: 0
[    32.905] (II) fglrx(0): Year: 2012  Week: 0
[    32.905] (II) fglrx(0): EDID Version: 1.4
[    32.905] (II) fglrx(0): Digital Display Input
[    32.905] (II) fglrx(0): 6 bits per channel
[    32.905] (II) fglrx(0): Digital interface is undefined
[    32.905] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    32.905] (II) fglrx(0): Gamma: 2.20
[    32.905] (II) fglrx(0): No DPMS capabilities specified
[    32.905] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    32.905] (II) fglrx(0): First detailed timing is preferred mode
[    32.905] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[    32.905] (II) fglrx(0): redX: 0.609 redY: 0.348   greenX: 0.352 greenY: 0.606
[    32.905] (II) fglrx(0): blueX: 0.150 blueY: 0.096   whiteX: 0.313 whiteY: 0.329
[    32.905] (II) fglrx(0): Manufacturer's mask: 0
[    32.905] (II) fglrx(0): Supported detailed timing:
[    32.905] (II) fglrx(0): clock: 76.4 MHz   Image Size:  344 x 194 mm
[    32.905] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[    32.905] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    32.905] (II) fglrx(0): Supported detailed timing:
[    32.905] (II) fglrx(0): clock: 50.9 MHz   Image Size:  344 x 194 mm
[    32.905] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[    32.905] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    32.905] (II) fglrx(0): Unknown vendor-specific block 2
[    32.905] (II) fglrx(0): EDID (in hex):
[    32.906] (II) fglrx(0): 	00ffffffffffff0030e4950300000000
[    32.906] (II) fglrx(0): 	00160104902213780a01a59c595a9b26
[    32.906] (II) fglrx(0): 	18505400000001010101010101010101
[    32.906] (II) fglrx(0): 	010101010101d81d56f4500016302430
[    32.906] (II) fglrx(0): 	350058c21000001be51356f450001630
[    32.906] (II) fglrx(0): 	2430350058c21000001b000000000000
[    32.906] (II) fglrx(0): 	00000000000000000000000000000002
[    32.906] (II) fglrx(0): 	000c47ff0a3c6412222964000000006e
[    32.906] (II) fglrx(0): EDID vendor "LGD", prod id 917
[    32.906] (II) fglrx(0): Printing DDC gathered Modelines:
[    32.906] (II) fglrx(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz eP)
[    32.906] (II) fglrx(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Printing probed modes for output LVDS
[    32.906] (II) fglrx(0): Modeline "1366x768"x60.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz eP)
[    32.906] (II) fglrx(0): Modeline "1366x768"x40.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Modeline "1280x768"x60.0   76.40  1280 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz e)
[    32.906] (II) fglrx(0): Modeline "1280x768"x40.0   50.93  1280 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Modeline "1280x720"x60.0   76.40  1280 1402 1450 1610  720 771 776 790 +hsync -vsync (47.5 kHz e)
[    32.906] (II) fglrx(0): Modeline "1280x720"x40.0   50.93  1280 1402 1450 1610  720 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Modeline "1024x768"x60.0   76.40  1024 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz e)
[    32.906] (II) fglrx(0): Modeline "1024x768"x40.0   50.93  1024 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Modeline "800x600"x60.0   76.40  800 1402 1450 1610  600 771 776 790 +hsync -vsync (47.5 kHz e)
[    32.906] (II) fglrx(0): Modeline "800x600"x40.0   50.93  800 1402 1450 1610  600 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Modeline "640x480"x60.0   76.40  640 1402 1450 1610  480 771 776 790 +hsync -vsync (47.5 kHz e)
[    32.906] (II) fglrx(0): Modeline "640x480"x40.0   50.93  640 1402 1450 1610  480 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): EDID for output DFP1
[    32.907] (II) fglrx(0): EDID for output CRT1
[    32.907] (II) fglrx(0): Output LVDS connected
[    32.907] (II) fglrx(0): Output DFP1 disconnected
[    32.907] (II) fglrx(0): Output CRT1 disconnected
[    32.907] (II) fglrx(0): Using exact sizes for initial modes
[    32.907] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    32.907] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    32.907] (II) fglrx(0): Display dimensions: (340, 190) mm
[    32.907] (II) fglrx(0): DPI set to (102, 102)
[    32.907] (II) fglrx(0): Adapter AMD Radeon HD 8200 / R3 Series has 2 configurable heads and 1 displays connected.
[    32.907] (II) Loading sub module "ramdac"
[    32.907] (II) LoadModule: "ramdac"
[    32.907] (II) Module "ramdac" already built-in
[    32.907] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    32.908] (II) UnloadModule: "radeon"
[    32.908] (II) Unloading radeon
[    32.908] (II) UnloadModule: "modesetting"
[    32.908] (II) Unloading modesetting
[    32.908] (II) UnloadModule: "fbdev"
[    32.908] (II) Unloading fbdev
[    32.908] (II) UnloadSubModule: "fbdevhw"
[    32.908] (II) Unloading fbdevhw
[    32.908] (II) UnloadModule: "vesa"
[    32.908] (II) Unloading vesa
[    32.909] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible. 
[    32.909] (WW) fglrx(0): ***********************************************************
[    32.909] (WW) fglrx(0): * DRI initialization failed                               *
[    32.909] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[    32.909] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
[    32.909] (WW) fglrx(0): ***********************************************************
[    32.909] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
2015-01-16T07:40:22.898277+01:00 knul systemd: pam_unix(systemd-user:session): session opened for user root by (uid=0)
2015-01-16T07:40:22.903150+01:00 knul systemd[1]: Starting Session 1 of user root.
2015-01-16T07:40:22.904204+01:00 knul systemd[1132]: Failed to open private bus connection: Failed to connect to socket /run/user/0/dbus/user_bus_socket: No such file or directory
2015-01-16T07:40:22.905364+01:00 knul systemd[1]: Started Session 1 of user root.
2015-01-16T07:40:23.091757+01:00 knul systemd[1132]: Stopped target Bluetooth.
2015-01-16T07:40:23.092608+01:00 knul systemd[1132]: Stopped target Sound Card.
2015-01-16T07:40:23.094188+01:00 knul systemd[1132]: Starting Default.
2015-01-16T07:40:23.095012+01:00 knul systemd[1132]: Reached target Default.
2015-01-16T07:40:23.095734+01:00 knul systemd[1132]: Startup finished in 189ms.
2015-01-16T07:40:23.096667+01:00 knul systemd[1]: Started User Manager for 0.
2015-01-16T07:40:23.130884+01:00 knul login: ROOT LOGIN ON tty1
2015-01-16T07:40:29.185906+01:00 knul clamd[651]: Starting Clam AntiVirus daemon ..done
2015-01-16T07:40:29.186437+01:00 knul systemd[1]: Started LSB: virus scanner daemon.
2015-01-16T07:40:29.187437+01:00 knul systemd[1]: Starting LSB: milter compatible mail scanner...
2015-01-16T07:40:29.233559+01:00 knul clamav-milter[1199]: Starting clamav-milter ..done
2015-01-16T07:40:29.235398+01:00 knul systemd[1]: Started LSB: milter compatible mail scanner.
2015-01-16T07:40:29.236911+01:00 knul systemd[1]: Starting Multi-User System.
2015-01-16T07:40:29.239388+01:00 knul systemd[1]: Reached target Multi-User System.
2015-01-16T07:40:29.241232+01:00 knul systemd[1]: Starting Graphical Interface.
2015-01-16T07:40:29.243241+01:00 knul systemd[1]: Reached target Graphical Interface.
2015-01-16T07:40:29.244854+01:00 knul systemd[1]: Starting Stop Read-Ahead Data Collection 10s After Completed Startup.
2015-01-16T07:40:29.246538+01:00 knul systemd[1]: Started Stop Read-Ahead Data Collection 10s After Completed Startup.
2015-01-16T07:40:29.248354+01:00 knul systemd[1]: Starting Update UTMP about System Runlevel Changes...
2015-01-16T07:40:29.251872+01:00 knul systemd[1]: Started Update UTMP about System Runlevel Changes.
2015-01-16T07:40:29.253444+01:00 knul systemd[1]: Startup finished in 6.222s (kernel) + 50.720s (userspace) = 1min 9.631s.
2015-01-16T07:40:54.804859+01:00 knul systemd[1]: Starting Getty on tty2...
2015-01-16T07:40:54.807651+01:00 knul systemd[1]: Started Getty on tty2.
2015-01-16T07:40:59.237229+01:00 knul systemd[1]: Starting Stop Read-Ahead Data Collection...
2015-01-16T07:40:59.244386+01:00 knul systemd[1]: Started Stop Read-Ahead Data Collection.
2015-01-16T07:41:03.710641+01:00 knul login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
2015-01-16T07:41:03.715540+01:00 knul systemd[1]: Starting Session 2 of user root.
2015-01-16T07:41:03.716536+01:00 knul systemd-logind[677]: New session 2 of user root.
2015-01-16T07:41:03.717293+01:00 knul systemd[1]: Started Session 2 of user root.
2015-01-16T07:41:03.721999+01:00 knul login: ROOT LOGIN ON tty2
2015-01-16T07:45:01.642734+01:00 knul /usr/sbin/cron[1283]: pam_unix(crond:session): session opened for user root by (uid=0)
2015-01-16T07:45:01.649305+01:00 knul systemd[1]: Starting Session 3 of user root.
2015-01-16T07:45:01.651542+01:00 knul systemd[1]: Started Session 3 of user root.
2015-01-16T07:45:01.848627+01:00 knul /USR/SBIN/CRON[1283]: pam_unix(crond:session): session closed for user root
2015-01-16T07:54:32.311439+01:00 knul systemd[1]: Starting Cleanup of Temporary Directories...
2015-01-16T07:54:32.640671+01:00 knul systemd[1]: Started Cleanup of Temporary Directories.
[    21.871] Current Operating System: Linux knul 3.11.10-25-desktop #1 SMP PREEMPT Wed Dec 17 17:57:03 UTC 2014 (8210f77) x86_64
[    21.871] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-25-desktop root=UUID=b1476839-7fef-4c53-8e08-49756401555f resume=/dev/disk/by-id/ata-WDC_WD5000LPVX-60V0TT0_WD-WXA1A14E3521-part3 splash=silent quiet showopts nomodeset
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.952] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    21.996] (II) The server relies on udev to provide the list of input devices.
[    21.996] (II) Loader magic: 0x804c20
[    21.996] (II) Module ABI versions:
[    22.000] Initializing built-in extension MIT-SCREEN-SAVER
[    22.000] (II) "glx" will be loaded by default.
[    22.000] (II) LoadModule: "dri2"
[    22.000] (II) Module "dri2" already built-in
[    22.000] (II) LoadModule: "glamoregl"
[    22.358] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[    22.362] (EE) Failed to load /usr/lib64/xorg/modules/libglamoregl.so: /usr/lib64/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context
[    22.362] (II) UnloadModule: "glamoregl"
[    22.362] (II) Unloading glamoregl
[    22.362] (EE) Failed to load module "glamoregl" (loader failed, 7)
[    22.362] (II) LoadModule: "glx"
[    22.375] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    22.375] (II) Module glx: vendor="X.Org Foundation"
[    22.375] (II) LoadModule: "fglrx"
[    22.376] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[    24.912] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    27.681] (II) Loading sub module "fglrxdrm"
[    27.681] (II) LoadModule: "fglrxdrm"
[    27.682] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    28.204] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    28.204] (II) LoadModule: "ati"
[    28.205] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[    28.224] (II) Module ati: vendor="X.Org Foundation"
[    28.224] (II) LoadModule: "radeon"
[    28.226] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[    28.276] (II) Module radeon: vendor="X.Org Foundation"
[    28.276] (II) LoadModule: "modesetting"
[    28.277] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[    28.277] (II) Module modesetting: vendor="X.Org Foundation"
[    28.278] (II) LoadModule: "fbdev"
[    28.279] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[    28.279] (II) Module fbdev: vendor="X.Org Foundation"
[    28.279] (II) LoadModule: "vesa"
[    28.280] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    28.280] (II) Module vesa: vendor="X.Org Foundation"
[    28.281] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[    28.281] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10.1006.1001          
[    28.281] (II) AMD Proprietary Linux Driver Build Date: May  5 2014 21:38:38
[    28.281] (II) RADEON: Driver for ATI Radeon chipsets:
[    28.297] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    28.297] (II) FBDEV: driver for framebuffer: fbdev
[    28.297] (II) VESA: driver for VESA chipsets: vesa
[    28.298] (WW) Falling back to old probe method for fglrx
[    29.323] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    29.512] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[    29.513] (II) fglrx(0): pEnt->device->identifier=0x5a28af
[    29.513] (WW) Falling back to old probe method for modesetting
[    29.513] (EE) open /dev/dri/card0: No such file or directory
[    29.513] (WW) Falling back to old probe method for fbdev
[    29.514] (II) Loading sub module "fbdevhw"
[    29.514] (II) LoadModule: "fbdevhw"
[    29.514] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    29.515] (II) Module fbdevhw: vendor="X.Org Foundation"
[    29.515] (WW) Falling back to old probe method for vesa
[    29.515] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[    29.516] (II) Loading sub module "vgahw"
[    29.516] (II) LoadModule: "vgahw"
[    29.517] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[    29.606] (II) Module vgahw: vendor="X.Org Foundation"
[    29.607] (II) fglrx(0): Creating default Display subsection in Screen section
[    29.607] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    29.607] (II) fglrx(0): Using 8 bits per RGB 
[    29.624] (II) Loading sub module "fglrxdrm"
[    29.624] (II) LoadModule: "fglrxdrm"
[    29.625] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    29.625] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    30.628] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    30.654] (II) Loading sub module "vbe"
[    30.654] (II) LoadModule: "vbe"
[    30.655] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[    30.698] (II) Module vbe: vendor="X.Org Foundation"
[    30.748] (II) fglrx(0): VESA BIOS detected
[    30.748] (II) fglrx(0): VESA VBE Version 3.0
[    30.748] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    30.748] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[    30.748] (II) fglrx(0): VESA VBE OEM Software Rev: 15.33
[    30.749] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[    30.749] (II) fglrx(0): VESA VBE OEM Product: KALINDI
[    30.749] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    30.769] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    30.770] (II) fglrx(0): PCIE card detected
[    30.770] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    30.770] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    30.770] (II) fglrx(0): RandR 1.2 support is enabled!
[    30.770] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    30.770] (II) Loading sub module "fb"
[    30.770] (II) LoadModule: "fb"
[    30.771] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    30.771] (II) Module fb: vendor="X.Org Foundation"
[    30.771] (II) fglrx(0): EDID Management option: EDID Management is enabled
[    30.771] (II) Loading sub module "ddc"
[    30.771] (II) LoadModule: "ddc"
[    30.771] (II) Module "ddc" already built-in
[    32.902] (II) fglrx(0): Output LVDS has no monitor section
[    32.902] (II) fglrx(0): Output DFP1 has no monitor section
[    32.902] (II) fglrx(0): Output CRT1 has no monitor section
[    32.902] (II) Loading sub module "ddc"
[    32.902] (II) LoadModule: "ddc"
[    32.902] (II) Module "ddc" already built-in
[    32.902] (II) fglrx(0): Connected Display0: LVDS
[    32.902] (II) fglrx(0): Display0 EDID data ---------------------------
[    32.902] (II) fglrx(0): Manufacturer: LGD  Model: 395  Serial#: 0
[    32.902] (II) fglrx(0): Year: 2012  Week: 0
[    32.902] (II) fglrx(0): EDID Version: 1.4
[    32.902] (II) fglrx(0): Digital Display Input
[    32.902] (II) fglrx(0): 6 bits per channel
[    32.902] (II) fglrx(0): Digital interface is undefined
[    32.902] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    32.902] (II) fglrx(0): Gamma: 2.20
[    32.902] (II) fglrx(0): No DPMS capabilities specified
[    32.903] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    32.903] (II) fglrx(0): First detailed timing is preferred mode
[    32.903] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[    32.903] (II) fglrx(0): redX: 0.609 redY: 0.348   greenX: 0.352 greenY: 0.606
[    32.903] (II) fglrx(0): blueX: 0.150 blueY: 0.096   whiteX: 0.313 whiteY: 0.329
[    32.903] (II) fglrx(0): Manufacturer's mask: 0
[    32.903] (II) fglrx(0): Supported detailed timing:
[    32.903] (II) fglrx(0): clock: 76.4 MHz   Image Size:  344 x 194 mm
[    32.903] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[    32.903] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    32.903] (II) fglrx(0): Supported detailed timing:
[    32.903] (II) fglrx(0): clock: 50.9 MHz   Image Size:  344 x 194 mm
[    32.903] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[    32.903] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    32.903] (II) fglrx(0): Unknown vendor-specific block 2
[    32.903] (II) fglrx(0): EDID (in hex):
[    32.903] (II) fglrx(0): 	00ffffffffffff0030e4950300000000
[    32.903] (II) fglrx(0): 	00160104902213780a01a59c595a9b26
[    32.903] (II) fglrx(0): 	18505400000001010101010101010101
[    32.903] (II) fglrx(0): 	010101010101d81d56f4500016302430
[    32.903] (II) fglrx(0): 	350058c21000001be51356f450001630
[    32.903] (II) fglrx(0): 	2430350058c21000001b000000000000
[    32.903] (II) fglrx(0): 	00000000000000000000000000000002
[    32.903] (II) fglrx(0): 	000c47ff0a3c6412222964000000006e
[    32.903] (II) fglrx(0): End of Display0 EDID data --------------------
[    32.903] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[    32.905] (II) fglrx(0): EDID for output LVDS
[    32.905] (II) fglrx(0): Manufacturer: LGD  Model: 395  Serial#: 0
[    32.905] (II) fglrx(0): Year: 2012  Week: 0
[    32.905] (II) fglrx(0): EDID Version: 1.4
[    32.905] (II) fglrx(0): Digital Display Input
[    32.905] (II) fglrx(0): 6 bits per channel
[    32.905] (II) fglrx(0): Digital interface is undefined
[    32.905] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    32.905] (II) fglrx(0): Gamma: 2.20
[    32.905] (II) fglrx(0): No DPMS capabilities specified
[    32.905] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    32.905] (II) fglrx(0): First detailed timing is preferred mode
[    32.905] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[    32.905] (II) fglrx(0): redX: 0.609 redY: 0.348   greenX: 0.352 greenY: 0.606
[    32.905] (II) fglrx(0): blueX: 0.150 blueY: 0.096   whiteX: 0.313 whiteY: 0.329
[    32.905] (II) fglrx(0): Manufacturer's mask: 0
[    32.905] (II) fglrx(0): Supported detailed timing:
[    32.905] (II) fglrx(0): clock: 76.4 MHz   Image Size:  344 x 194 mm
[    32.905] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[    32.905] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    32.905] (II) fglrx(0): Supported detailed timing:
[    32.905] (II) fglrx(0): clock: 50.9 MHz   Image Size:  344 x 194 mm
[    32.905] (II) fglrx(0): h_active: 1366  h_sync: 1402  h_sync_end 1450 h_blank_end 1610 h_border: 0
[    32.905] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    32.905] (II) fglrx(0): Unknown vendor-specific block 2
[    32.905] (II) fglrx(0): EDID (in hex):
[    32.906] (II) fglrx(0): 	00ffffffffffff0030e4950300000000
[    32.906] (II) fglrx(0): 	00160104902213780a01a59c595a9b26
[    32.906] (II) fglrx(0): 	18505400000001010101010101010101
[    32.906] (II) fglrx(0): 	010101010101d81d56f4500016302430
[    32.906] (II) fglrx(0): 	350058c21000001be51356f450001630
[    32.906] (II) fglrx(0): 	2430350058c21000001b000000000000
[    32.906] (II) fglrx(0): 	00000000000000000000000000000002
[    32.906] (II) fglrx(0): 	000c47ff0a3c6412222964000000006e
[    32.906] (II) fglrx(0): EDID vendor "LGD", prod id 917
[    32.906] (II) fglrx(0): Printing DDC gathered Modelines:
[    32.906] (II) fglrx(0): Modeline "1366x768"x0.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz eP)
[    32.906] (II) fglrx(0): Modeline "1366x768"x0.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Printing probed modes for output LVDS
[    32.906] (II) fglrx(0): Modeline "1366x768"x60.0   76.40  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz eP)
[    32.906] (II) fglrx(0): Modeline "1366x768"x40.0   50.93  1366 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Modeline "1280x768"x60.0   76.40  1280 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz e)
[    32.906] (II) fglrx(0): Modeline "1280x768"x40.0   50.93  1280 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Modeline "1280x720"x60.0   76.40  1280 1402 1450 1610  720 771 776 790 +hsync -vsync (47.5 kHz e)
[    32.906] (II) fglrx(0): Modeline "1280x720"x40.0   50.93  1280 1402 1450 1610  720 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Modeline "1024x768"x60.0   76.40  1024 1402 1450 1610  768 771 776 790 +hsync -vsync (47.5 kHz e)
[    32.906] (II) fglrx(0): Modeline "1024x768"x40.0   50.93  1024 1402 1450 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Modeline "800x600"x60.0   76.40  800 1402 1450 1610  600 771 776 790 +hsync -vsync (47.5 kHz e)
[    32.906] (II) fglrx(0): Modeline "800x600"x40.0   50.93  800 1402 1450 1610  600 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): Modeline "640x480"x60.0   76.40  640 1402 1450 1610  480 771 776 790 +hsync -vsync (47.5 kHz e)
[    32.906] (II) fglrx(0): Modeline "640x480"x40.0   50.93  640 1402 1450 1610  480 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.906] (II) fglrx(0): EDID for output DFP1
[    32.907] (II) fglrx(0): EDID for output CRT1
[    32.907] (II) fglrx(0): Output LVDS connected
[    32.907] (II) fglrx(0): Output DFP1 disconnected
[    32.907] (II) fglrx(0): Output CRT1 disconnected
[    32.907] (II) fglrx(0): Using exact sizes for initial modes
[    32.907] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    32.907] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    32.907] (II) fglrx(0): Display dimensions: (340, 190) mm
[    32.907] (II) fglrx(0): DPI set to (102, 102)
[    32.907] (II) fglrx(0): Adapter AMD Radeon HD 8200 / R3 Series has 2 configurable heads and 1 displays connected.
[    32.907] (II) Loading sub module "ramdac"
[    32.907] (II) LoadModule: "ramdac"
[    32.907] (II) Module "ramdac" already built-in
[    32.907] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    32.908] (II) UnloadModule: "radeon"
[    32.908] (II) Unloading radeon
[    32.908] (II) UnloadModule: "modesetting"
[    32.908] (II) Unloading modesetting
[    32.908] (II) UnloadModule: "fbdev"
[    32.908] (II) Unloading fbdev
[    32.908] (II) UnloadSubModule: "fbdevhw"
[    32.908] (II) Unloading fbdevhw
[    32.908] (II) UnloadModule: "vesa"
[    32.908] (II) Unloading vesa
[    32.909] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible. 
[    32.909] (WW) fglrx(0): ***********************************************************
[    32.909] (WW) fglrx(0): * DRI initialization failed                               *
[    32.909] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[    32.909] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
[    32.909] (WW) fglrx(0): ***********************************************************
[    32.909] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
dann viel Spaß damit
josef-wien schrieb
P. S. Wegen Deiner Befindlichkeit werden die Kernel-Entwickler nicht eine Warn-Meldung weglassen, wenn es zu den von Deiner CPU gemeldeten Informationen Processor Signature und Processor Revision ID keinen Microcode gibt.
Zum Vergrößern anklicken....
vor dem update war der microcode vorhanden. der Processor hat sich nicht geändert. sehr aufschlussreich, wie man mit einem update einen microcode verschwinden läßt. das ist Sabotage !!!
 
J

josef-wien

Ultimate Guru
wschmock schrieb:
ich habe eigentlich keine Zeit für derartig aufwendige Tests
Zum Vergrößern anklicken....
Dann darfst Du Dein System nicht in Unordnung bringen, denn
wschmock schrieb:
Code: 
[    32.909] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
Zum Vergrößern anklicken....
sowie das Fehlen der libglx.so von fglrx passieren nicht von alleine und auch nicht durch die angegebenen Paket-Aktualisierungen. Entweder sorgst Du dafür, daß fglrx korrekt installiert ist, oder Du entfernst alle seine Spuren einschließlich der Datei /etc/X11/xorg.conf und verwendest radeon.

wschmock schrieb:
vor dem update war der microcode vorhanden
Zum Vergrößern anklicken....
Mir reicht Dein stures Festhalten an der Irrealität. Ich bin ab sofort draußen.
 
susejunky

susejunky

Moderator
Teammitglied
Hallo wschmock,

wschmock schrieb:
ich habe eigentlich keine Zeit für derartig aufwendige Tests. . . . das ist Sabotage !!!
Zum Vergrößern anklicken....
Wenn in einem Betriebssystem, das von Freiwilligen in ihrer Freizeit, entwickelt und Dir kostenlos zur Verfügung gestellt wird, ein Fehler auftritt (wobei z. Zt. noch nicht einmal klar ist, ob tatsächlich ein Fehler oder ein "user-error" vorliegt), sprichst Du von Sabotage.

Du wendest Dich mit einem (möglicherweise sogar von Dir verschuldetem) Problem an ein Forum und erwartest, dass Dir die Forums-Mitglieder (in ihrer Freizeit!) helfen Dein Problem zu lösen, hast aber selbst nicht die Zeit (oder die Lust?) die erforderlichen Informationen dazu bereit zustellen.

Würdest Du ein kostenpflichtiges Betriebssystem mit Wartungsvertrag und vereinbarten Service-Leveln nutzen, könnte ich Dein Verhalten nachvollziehen, aber so wie die Gegebenheiten sind, kann ich Dein Verhalten nicht verstehen.

Viele Grüße

susejunky
 
OP
W

wschmock

Hacker
wenn ich bei meinem funktionierenden Linux zypper up eingebe und der Rechner startet anschließend nicht mehr, dann ist es ein selbst verschuldetes Problem ? sehr merkwürdrige Ansichten
 
OP
W

wschmock

Hacker
zu fglrx: Datei suchen fglrx* Gefunden 84,
wenn in einerm update etwas reingeschrieben wird, von dem bekannt ist, das es nicht existiert, so ist das Sabotage !
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben