[gelöst]Neuinstallation 13.1 kein graphisches system

dietterle65 · 4 Okt. 2014

Hallo an alle,

ich habe auf meinem Rechner 13.1 neu installiert.
Am Anfang ging das graphische system noch, ohne den Nvidia Treiber.
Dann habe ich alle Updates gemacht, mit dem nvidia Repo. Das ergebnis: Der Rechner bleibt auf der Konsole stehen.

Ich bin auf der Konsole mit dem Browser "Links" unterwegs. wie kriege ich die Ausgabe von
Xorg.0.log hier in den Browser?

mfg

check your system`s kernel log for additionel error

Ob`s etwas bringt, alles von nvidia zu löschen?

dietterle65 · 4 Okt. 2014

Ich verstehe nicht, dass das System nicht mal mit dem nv Treiber startet. -nachdem ich alles von nvidia deinstalliert habe, funktioniert das erst mal.

Code:

hwinfo --gfx
30: PCI 200.0: 0300 VGA compatible controller (VGA)             
  [Created at pci.319]
  Unique ID: B35A.QrK1+wp+3C7
  Parent ID: WL76.5wNWUrlOQmD
  SysFS ID: /devices/pci0000:00/0000:00:09.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: graphics card
  Model: "nVidia GeForce 8600 GT"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0402 "GeForce 8600 GT"
  Revision: 0xa1
  Driver: "nouveau"
  Driver Modules: "drm"
  Memory Range: 0xfa000000-0xfaffffff (rw,non-prefetchable)
  Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
  Memory Range: 0xf8000000-0xf9ffffff (rw,non-prefetchable)
  I/O Ports: 0xec00-0xec7f (rw)
  Memory Range: 0xfbee0000-0xfbefffff (ro,non-prefetchable,disabled)
  IRQ: 17 (896 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd00000402sv00000000sd00000000bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: nv
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #21 (PCI bridge)

Linux 3.11.10-21-desktop
openSUSE 13.1 (Bottle) (x86_64)

Code:

uname -a
Linux betonklotz 3.11.10-21-desktop #1 SMP PREEMPT Mon Jul 21 15:28:46 UTC 2014 (9a9565d) x86_64 x86_64 x86_64 GNU/Linux

Code:

cat /var/log/Xorg.0.log                                                                                                                                                                                                   
[    10.048]                                                                                                                                                                                                                                 
This is a pre-release version of the X server from The X.Org Foundation.                                                                                                                                                                     
It is not supported in any way.                                                                                                                                                                                                              
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.                                                                                                                                                                           
Select the "xorg" product for bugs you find in this release.                                                                                                                                                                                 
Before reporting bugs in pre-release versions please check the                                                                                                                                                                               
latest version in the X.Org Foundation git repository.                                                                                                                                                                                       
See http://wiki.x.org/wiki/GitPage for git access instructions.                                                                                                                                                                              
[    10.048]                                                                                                                                                                                                                                 
X.Org X Server 1.14.3.901 (1.14.4 RC 1)                                                                                                                                                                                                      
Release Date: 2013-10-26                                                                                                                                                                                                                     
[    10.048] X Protocol Version 11, Revision 0                                                                                                                                                                                               
[    10.048] Build Operating System: openSUSE SUSE LINUX                                                                                                                                                                                     
[    10.048] Current Operating System: Linux betonklotz 3.11.10-21-desktop #1 SMP PREEMPT Mon Jul 21 15:28:46 UTC 2014 (9a9565d) x86_64                                                                                                      
[    10.048] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-21-desktop root=UUID=97491128-96dc-4cd6-b85d-1f52760439e1 resume=/dev/disk/by-id/ata-Hitachi_HDS721010DLE630_MSK523Y200GBGB-part5 splash=silent quiet showopts            
[    10.048] Build Date: 17 April 2014  05:37:34AM                                                                                                                                                                                           
[    10.048]                                                                                                                                                                                                                                 
[    10.049] Current version of pixman: 0.30.2                                                                                                                                                                                               
[    10.049]    Before reporting problems, check http://wiki.x.org                                                                                                                                                                           
        to make sure that you have the latest version.                                                                                                                                                                                       
[    10.049] Markers: (--) probed, (**) from config file, (==) default setting,                                                                                                                                                              
        (++) from command line, (!!) notice, (II) informational,                                                                                                                                                                             
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.                                                                                                                                                                        
[    10.049] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct  4 18:18:27 2014                                                                                                                                                            
[    10.049] (==) Using config directory: "/etc/X11/xorg.conf.d"                                                                                                                                                                             
[    10.049] (==) Using system config directory "/usr/share/X11/xorg.conf.d"                                                                                                                                                                 
[    10.050] (==) No Layout section.  Using the first Screen section.                                                                                                                                                                        
[    10.050] (==) No screen section available. Using defaults.                                                                                                                                                                               
[    10.050] (**) |-->Screen "Default Screen Section" (0)                                                                                                                                                                                    
[    10.050] (**) |   |-->Monitor "<default monitor>"                                                                                                                                                                                        
[    10.051] (==) No monitor specified for screen "Default Screen Section".                                                                                                                                                                  
        Using a default monitor configuration.                                                                                                                                                                                               
[    10.051] (==) Automatically adding devices                                                                                                                                                                                               
[    10.051] (==) Automatically enabling devices                                                                                                                                                                                             
[    10.051] (==) Automatically adding GPU devices                                                                                                                                                                                           
[    10.233] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.                                                                                                                                                                  
[    10.233]    Entry deleted from font path.                                                                                                                                                                                                
[    10.247] (==) FontPath set to:                                                                                                                                                                                                           
        /usr/share/fonts/misc:unscaled,                                                                                                                                                                                                      
        /usr/share/fonts/Type1/,                                                                                                                                                                                                             
        /usr/share/fonts/100dpi:unscaled,                                                                                                                                                                                                    
        /usr/share/fonts/75dpi:unscaled,                                                                                                                                                                                                     
        /usr/share/fonts/ghostscript/,                                                                                                                                                                                                       
        /usr/share/fonts/cyrillic:unscaled,                                                                                                                                                                                                  
        /usr/share/fonts/truetype/,                                                                                                                                                                                                          
        built-ins                                                                                                                                                                                                                            
[    10.247] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"                                                                                                                                                
[    10.247] (II) The server relies on udev to provide the list of input devices.                                                                                                                                                            
        If no devices become available, reconfigure udev or disable AutoAddDevices.                                                                                                                                                          
[    10.247] (II) Loader magic: 0x803c20                                                                                                                                                                                                     
[    10.247] (II) Module ABI versions:                                                                                                                                                                                                       
[    10.247]    X.Org ANSI C Emulation: 0.4
[    10.247]    X.Org Video Driver: 14.1
[    10.247]    X.Org XInput driver : 19.1
[    10.247]    X.Org Server Extension : 7.0
[    10.247] (II) xfree86: Adding drm device (/dev/dri/card0)
[    10.250] (--) PCI:*(0:2:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[    10.250] Initializing built-in extension Generic Event Extension
[    10.250] Initializing built-in extension SHAPE
[    10.250] Initializing built-in extension MIT-SHM
[    10.251] Initializing built-in extension XInputExtension
[    10.251] Initializing built-in extension XTEST
[    10.251] Initializing built-in extension BIG-REQUESTS
[    10.251] Initializing built-in extension SYNC
[    10.251] Initializing built-in extension XKEYBOARD
[    10.251] Initializing built-in extension XC-MISC
[    10.251] Initializing built-in extension SECURITY
[    10.251] Initializing built-in extension XINERAMA
[    10.251] Initializing built-in extension XFIXES
[    10.251] Initializing built-in extension RENDER
[    10.251] Initializing built-in extension RANDR
[    10.251] Initializing built-in extension COMPOSITE
[    10.251] Initializing built-in extension DAMAGE
[    10.251] Initializing built-in extension MIT-SCREEN-SAVER
[    10.251] Initializing built-in extension DOUBLE-BUFFER
[    10.251] Initializing built-in extension RECORD
[    10.251] Initializing built-in extension DPMS
[    10.251] Initializing built-in extension X-Resource
[    10.251] Initializing built-in extension XVideo
[    10.251] Initializing built-in extension XVideo-MotionCompensation
[    10.251] Initializing built-in extension XFree86-VidModeExtension
[    10.251] Initializing built-in extension XFree86-DGA
[    10.251] Initializing built-in extension XFree86-DRI
[    10.251] Initializing built-in extension DRI2
[    10.251] (II) LoadModule: "glx"
[    10.282] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    10.295] (II) Module glx: vendor="X.Org Foundation"
[    10.295]    compiled for 1.14.3.901, module version = 1.0.0
[    10.295]    ABI class: X.Org Server Extension, version 7.0
[    10.295] (==) AIGLX enabled
[    10.295] Loading extension GLX
[    10.295] (==) Matched nvidia as autoconfigured driver 0
[    10.295] (==) Matched nouveau as autoconfigured driver 1
[    10.295] (==) Matched nv as autoconfigured driver 2
[    10.295] (==) Matched nvidia as autoconfigured driver 3
[    10.295] (==) Matched nouveau as autoconfigured driver 4
[    10.295] (==) Matched nv as autoconfigured driver 5
[    10.295] (==) Matched modesetting as autoconfigured driver 6
[    10.295] (==) Matched fbdev as autoconfigured driver 7
[    10.295] (==) Matched vesa as autoconfigured driver 8
[    10.295] (==) Assigned the driver to the xf86ConfigLayout
[    10.295] (II) LoadModule: "nvidia"
[    10.296] (WW) Warning, couldn't open module nvidia
[    10.296] (II) UnloadModule: "nvidia"
[    10.296] (II) Unloading nvidia
[    10.296] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    10.296] (II) LoadModule: "nouveau"
[    10.297] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[    10.297] (II) Module nouveau: vendor="X.Org Foundation"
[    10.298]    compiled for 1.14.3, module version = 1.0.9
[    10.298]    Module class: X.Org Video Driver
[    10.298]    ABI class: X.Org Video Driver, version 14.1
[    10.298] (II) LoadModule: "nv"
[    10.298] (II) Loading /usr/lib64/xorg/modules/drivers/nv_drv.so
[    10.299] (II) Module nv: vendor="X.Org Foundation"
[    10.299]    compiled for 1.14.3, module version = 2.1.20
[    10.299]    Module class: X.Org Video Driver
[    10.299]    ABI class: X.Org Video Driver, version 14.1
[    10.299] (II) LoadModule: "modesetting"
[    10.299] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[    10.300] (II) Module modesetting: vendor="X.Org Foundation"
[    10.300]    compiled for 1.14.3.901, module version = 0.8.0
[    10.300]    Module class: X.Org Video Driver
[    10.300]    ABI class: X.Org Video Driver, version 14.1
[    10.300] (II) LoadModule: "fbdev"
[    10.300] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[    10.301] (II) Module fbdev: vendor="X.Org Foundation"
[    10.301]    compiled for 1.14.3, module version = 0.4.3
[    10.301]    Module class: X.Org Video Driver
[    10.301]    ABI class: X.Org Video Driver, version 14.1
[    10.301] (II) LoadModule: "vesa"
[    10.301] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    10.301] (II) Module vesa: vendor="X.Org Foundation"
[    10.301]    compiled for 1.14.3, module version = 2.3.3
[    10.302]    Module class: X.Org Video Driver
[    10.302]    ABI class: X.Org Video Driver, version 14.1
[    10.302] (II) NOUVEAU driver 
[    10.302] (II) NOUVEAU driver for NVIDIA chipset families :
[    10.302]    RIVA TNT        (NV04)
[    10.302]    RIVA TNT2       (NV05)
[    10.302]    GeForce 256     (NV10)
[    10.302]    GeForce 2       (NV11, NV15)
[    10.302]    GeForce 4MX     (NV17, NV18)
[    10.302]    GeForce 3       (NV20)
[    10.302]    GeForce 4Ti     (NV25, NV28)
[    10.302]    GeForce FX      (NV3x)
[    10.302]    GeForce 6       (NV4x)
[    10.302]    GeForce 7       (G7x)
[    10.302]    GeForce 8       (G8x)
[    10.302]    GeForce GTX 200 (NVA0)
[    10.302]    GeForce GTX 400 (NVC0)
[    10.302] (II) NOUVEAU driver 
[    10.302] (II) NOUVEAU driver for NVIDIA chipset families :
[    10.302]    RIVA TNT        (NV04)
[    10.302]    RIVA TNT2       (NV05)
[    10.302]    GeForce 256     (NV10)
[    10.302]    GeForce 2       (NV11, NV15)
[    10.303]    GeForce 4MX     (NV17, NV18)
[    10.303]    GeForce 3       (NV20)
[    10.303]    GeForce 4Ti     (NV25, NV28)
[    10.303]    GeForce FX      (NV3x)
[    10.303]    GeForce 6       (NV4x)
[    10.303]    GeForce 7       (G7x)
[    10.303]    GeForce 8       (G8x)
[    10.303]    GeForce GTX 200 (NVA0)
[    10.303]    GeForce GTX 400 (NVC0)
[    10.303] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    10.303] (II) FBDEV: driver for framebuffer: fbdev
[    10.303] (II) VESA: driver for VESA chipsets: vesa
[    10.303] (++) using VT number 7

[    10.303] (II) [drm] nouveau interface version: 1.1.1
[    10.303] (WW) Falling back to old probe method for modesetting
[    10.303] (WW) Falling back to old probe method for fbdev
[    10.303] (II) Loading sub module "fbdevhw"
[    10.303] (II) LoadModule: "fbdevhw"
[    10.304] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    10.304] (II) Module fbdevhw: vendor="X.Org Foundation"
[    10.304]    compiled for 1.14.3.901, module version = 0.0.2
[    10.304]    ABI class: X.Org Video Driver, version 14.1
[    10.304] (WW) Falling back to old probe method for vesa
[    10.304] (II) Loading sub module "dri2"
[    10.304] (II) LoadModule: "dri2"
[    10.304] (II) Module "dri2" already built-in
[    10.304] (--) NOUVEAU(0): Chipset: "NVIDIA NV84"
[    10.304] (II) NOUVEAU(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    10.304] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    10.304] (==) NOUVEAU(0): RGB weight 888
[    10.304] (==) NOUVEAU(0): Default visual is TrueColor
[    10.304] (==) NOUVEAU(0): Using HW cursor
[    10.304] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    10.304] (==) NOUVEAU(0): Page flipping enabled
[    10.304] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    10.343] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    10.366] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    10.396] (II) NOUVEAU(0): EDID for output DVI-I-1
[    10.396] (II) NOUVEAU(0): Manufacturer: GSM  Model: 5678  Serial#: 55577
[    10.396] (II) NOUVEAU(0): Year: 2008  Week: 9
[    10.396] (II) NOUVEAU(0): EDID Version: 1.3
[    10.396] (II) NOUVEAU(0): Digital Display Input
[    10.396] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 49  vert.: 32
[    10.396] (II) NOUVEAU(0): Gamma: 2.20
[    10.396] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[    10.396] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    10.396] (II) NOUVEAU(0): First detailed timing is preferred mode
[    10.396] (II) NOUVEAU(0): redX: 0.635 redY: 0.342   greenX: 0.292 greenY: 0.611
[    10.396] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    10.396] (II) NOUVEAU(0): Supported established timings:
[    10.396] (II) NOUVEAU(0): 720x400@70Hz
[    10.396] (II) NOUVEAU(0): 640x480@60Hz
[    10.396] (II) NOUVEAU(0): 640x480@75Hz
[    10.396] (II) NOUVEAU(0): 800x600@56Hz
[    10.396] (II) NOUVEAU(0): 800x600@60Hz
[    10.396] (II) NOUVEAU(0): 800x600@75Hz
[    10.396] (II) NOUVEAU(0): 832x624@75Hz
[    10.396] (II) NOUVEAU(0): 1024x768@60Hz
[    10.396] (II) NOUVEAU(0): 1024x768@75Hz
[    10.396] (II) NOUVEAU(0): 1280x1024@75Hz
[    10.396] (II) NOUVEAU(0): 1152x864@75Hz
[    10.396] (II) NOUVEAU(0): Manufacturer's mask: 0
[    10.396] (II) NOUVEAU(0): Supported standard timings:
[    10.396] (II) NOUVEAU(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    10.396] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    10.396] (II) NOUVEAU(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    10.396] (II) NOUVEAU(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    10.396] (II) NOUVEAU(0): Supported detailed timing:
[    10.396] (II) NOUVEAU(0): clock: 119.0 MHz   Image Size:  474 x 296 mm
[    10.396] (II) NOUVEAU(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[    10.396] (II) NOUVEAU(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
[    10.396] (II) NOUVEAU(0): Supported detailed timing:
[    10.396] (II) NOUVEAU(0): clock: 146.2 MHz   Image Size:  474 x 296 mm
[    10.396] (II) NOUVEAU(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
[    10.396] (II) NOUVEAU(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
[    10.396] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[    10.396] (II) NOUVEAU(0): Monitor name: W2242
[    10.396] (II) NOUVEAU(0): EDID (in hex):
[    10.396] (II) NOUVEAU(0):   00ffffffffffff001e6d785619d90000
[    10.396] (II) NOUVEAU(0):   09120103ea312078eaaec5a2574a9c25
[    10.396] (II) NOUVEAU(0):   125054a76b80950081808140714f0101
[    10.396] (II) NOUVEAU(0):   0101010101017c2e90a0601a1e403020
[    10.396] (II) NOUVEAU(0):   3600da281100001a21399030621a2740
[    10.396] (II) NOUVEAU(0):   68b03600da281100001c000000fd0038
[    10.396] (II) NOUVEAU(0):   4b1e530f000a202020202020000000fc
[    10.396] (II) NOUVEAU(0):   0057323234320a202020202020200071
[    10.396] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    10.396] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[    10.396] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    10.396] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    10.419] (II) NOUVEAU(0): EDID for output VGA-1
[    10.419] (II) NOUVEAU(0): Output DVI-I-1 connected
[    10.419] (II) NOUVEAU(0): Output VGA-1 disconnected
[    10.419] (II) NOUVEAU(0): Using exact sizes for initial modes
[    10.419] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1680x1050
[    10.419] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    10.419] (--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 0)
[    10.419] (**) NOUVEAU(0):  Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[    10.419] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[    10.419] (**) NOUVEAU(0):  Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[    10.419] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    10.419] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    10.419] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    10.419] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    10.419] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    10.419] (**) NOUVEAU(0):  Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[    10.419] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    10.419] (**) NOUVEAU(0):  Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[    10.419] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    10.419] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    10.419] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    10.419] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    10.420] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    10.420] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    10.420] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    10.420] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    10.420] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    10.420] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    10.420] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    10.420] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    10.420] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    10.420] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    10.420] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    10.420] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    10.420] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    10.420] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    10.420] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    10.420] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    10.420] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    10.420] (==) NOUVEAU(0): DPI set to (96, 96)
[    10.420] (II) Loading sub module "fb"
[    10.420] (II) LoadModule: "fb"
[    10.420] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    10.420] (II) Module fb: vendor="X.Org Foundation"
[    10.420]    compiled for 1.14.3.901, module version = 1.0.0
[    10.420]    ABI class: X.Org ANSI C Emulation, version 0.4
[    10.420] (II) Loading sub module "exa"
[    10.420] (II) LoadModule: "exa"
[    10.420] (II) Loading /usr/lib64/xorg/modules/libexa.so
[    10.429] (II) Module exa: vendor="X.Org Foundation"
[    10.429]    compiled for 1.14.3.901, module version = 2.6.0
[    10.429]    ABI class: X.Org Video Driver, version 14.1
[    10.429] (II) Loading sub module "shadowfb"
[    10.429] (II) LoadModule: "shadowfb"
[    10.430] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[    10.438] (II) Module shadowfb: vendor="X.Org Foundation"
[    10.438]    compiled for 1.14.3.901, module version = 1.0.0
[    10.438]    ABI class: X.Org ANSI C Emulation, version 0.4
[    10.438] (II) UnloadModule: "nv"
[    10.438] (II) Unloading nv
[    10.438] (II) UnloadModule: "modesetting"
[    10.438] (II) Unloading modesetting
[    10.438] (II) UnloadModule: "fbdev"
[    10.438] (II) Unloading fbdev
[    10.438] (II) UnloadSubModule: "fbdevhw"
[    10.438] (II) Unloading fbdevhw
[    10.438] (II) UnloadModule: "vesa"
[    10.438] (II) Unloading vesa
[    10.438] (--) Depth 24 pixmap format is 32 bpp
[    10.440] (II) NOUVEAU(0): Opened GPU channel 0
[    10.453] (II) NOUVEAU(0): [DRI2] Setup complete
[    10.453] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    10.453] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    10.459] (II) EXA(0): Driver allocated offscreen pixmaps
[    10.459] (II) EXA(0): Driver registered support for the following operations:
[    10.459] (II)         Solid
[    10.459] (II)         Copy
[    10.459] (II)         Composite (RENDER acceleration)
[    10.459] (II)         UploadToScreen
[    10.459] (II)         DownloadFromScreen
[    10.459] (==) NOUVEAU(0): Backing store disabled
[    10.459] (==) NOUVEAU(0): Silken mouse enabled
[    10.461] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    10.461] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    10.461] (==) NOUVEAU(0): DPMS enabled
[    10.461] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    10.462] (--) RandR disabled
[    11.013] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    11.013] (II) AIGLX: enabled GLX_INTEL_swap_event
[    11.013] (II) AIGLX: enabled GLX_ARB_create_context
[    11.013] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    11.013] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    11.013] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    11.013] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    11.015] (II) AIGLX: Loaded and initialized nouveau
[    11.015] (II) GLX: Initialized DRI2 GL provider for screen 0
[    11.019] (II) NOUVEAU(0): NVEnterVT is called.
[    11.052] (II) NOUVEAU(0): Setting screen physical size to 444 x 277
[    11.052] resize called 1680 1050
[    11.384] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    11.384] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.384] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.384] (**) Power Button: Applying InputClass "LocalKeyboard"
[    11.384] (II) LoadModule: "evdev"
[    11.385] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    11.406] (II) Module evdev: vendor="X.Org Foundation"
[    11.406]    compiled for 1.14.3, module version = 2.8.2
[    11.406]    Module class: X.Org XInput Driver
[    11.406]    ABI class: X.Org XInput driver, version 19.1
[    11.406] (II) Using input driver 'evdev' for 'Power Button'
[    11.406] (**) Power Button: always reports core events
[    11.406] (**) evdev: Power Button: Device: "/dev/input/event1"
[    11.406] (--) evdev: Power Button: Vendor 0 Product 0x1
[    11.406] (--) evdev: Power Button: Found keys
[    11.406] (II) evdev: Power Button: Configuring as keyboard
[    11.406] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    11.406] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    11.406] (**) Option "xkb_rules" "evdev"
[    11.406] (**) Option "xkb_model" "pc104"
[    11.406] (**) Option "xkb_layout" "de"
[    11.406] (**) Option "xkb_variant" "nodeadkeys"
[    11.451] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    11.451] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.451] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.451] (**) Power Button: Applying InputClass "LocalKeyboard"
[    11.451] (II) Using input driver 'evdev' for 'Power Button'
[    11.451] (**) Power Button: always reports core events
[    11.451] (**) evdev: Power Button: Device: "/dev/input/event0"
[    11.451] (--) evdev: Power Button: Vendor 0 Product 0x1
[    11.451] (--) evdev: Power Button: Found keys
[    11.451] (II) evdev: Power Button: Configuring as keyboard
[    11.452] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    11.452] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    11.452] (**) Option "xkb_rules" "evdev"
[    11.452] (**) Option "xkb_model" "pc104"
[    11.452] (**) Option "xkb_layout" "de"
[    11.452] (**) Option "xkb_variant" "nodeadkeys"
[    11.453] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    11.453] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    11.453] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    11.453] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    11.453] (**) Logitech USB Receiver: always reports core events
[    11.453] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[    11.453] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    11.453] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    11.453] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    11.453] (--) evdev: Logitech USB Receiver: Found relative axes
[    11.453] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    11.453] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    11.453] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    11.453] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    11.453] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    11.453] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input2/event2"
[    11.453] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[    11.453] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    11.453] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    11.453] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    11.453] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    11.453] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    11.454] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    11.454] (II) No input driver specified, ignoring this device.
[    11.454] (II) This device may have been added with another device file.
[    11.454] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[    11.454] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    11.454] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    11.454] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard"
[    11.454] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    11.454] (**) Logitech USB Receiver: always reports core events
[    11.454] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[    11.454] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    11.454] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    11.454] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    11.454] (--) evdev: Logitech USB Receiver: Found relative axes
[    11.454] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    11.454] (--) evdev: Logitech USB Receiver: Found absolute axes
[    11.454] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    11.454] (--) evdev: Logitech USB Receiver: Found keys
[    11.454] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    11.454] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    11.454] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    11.454] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    11.454] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    11.454] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.1/input/input3/event3"
[    11.454] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[    11.454] (**) Option "xkb_rules" "evdev"
[    11.454] (**) Option "xkb_model" "pc104"
[    11.454] (**) Option "xkb_layout" "de"
[    11.454] (**) Option "xkb_variant" "nodeadkeys"
[    11.454] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    11.454] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    11.455] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    11.455] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    11.455] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    11.455] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    11.455] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event4)
[    11.455] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    11.455] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    11.455] (**)   USB Keyboard: Applying InputClass "LocalKeyboard"
[    11.455] (II) Using input driver 'evdev' for '  USB Keyboard'
[    11.455] (**)   USB Keyboard: always reports core events
[    11.455] (**) evdev:   USB Keyboard: Device: "/dev/input/event4"
[    11.455] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1503
[    11.455] (--) evdev:   USB Keyboard: Found keys
[    11.455] (II) evdev:   USB Keyboard: Configuring as keyboard
[    11.455] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input4/event4"
[    11.455] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 10)
[    11.455] (**) Option "xkb_rules" "evdev"
[    11.455] (**) Option "xkb_model" "pc104"
[    11.455] (**) Option "xkb_layout" "de"
[    11.455] (**) Option "xkb_variant" "nodeadkeys"
[    11.456] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event5)
[    11.456] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    11.456] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    11.456] (**)   USB Keyboard: Applying InputClass "LocalKeyboard"
[    11.456] (II) Using input driver 'evdev' for '  USB Keyboard'
[    11.456] (**)   USB Keyboard: always reports core events
[    11.456] (**) evdev:   USB Keyboard: Device: "/dev/input/event5"
[    11.456] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1503
[    11.456] (--) evdev:   USB Keyboard: Found keys
[    11.456] (II) evdev:   USB Keyboard: Configuring as keyboard
[    11.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.1/input/input5/event5"
[    11.456] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 11)
[    11.456] (**) Option "xkb_rules" "evdev"
[    11.456] (**) Option "xkb_model" "pc104"
[    11.456] (**) Option "xkb_layout" "de"
[    11.456] (**) Option "xkb_variant" "nodeadkeys"
[    11.456] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event10)
[    11.456] (II) No input driver specified, ignoring this device.
[    11.456] (II) This device may have been added with another device file.
[    11.457] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event11)
[    11.457] (II) No input driver specified, ignoring this device.
[    11.457] (II) This device may have been added with another device file.
[    11.457] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event7)
[    11.457] (II) No input driver specified, ignoring this device.
[    11.457] (II) This device may have been added with another device file.
[    11.457] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event8)
[    11.457] (II) No input driver specified, ignoring this device.
[    11.457] (II) This device may have been added with another device file.
[    11.457] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event9)
[    11.457] (II) No input driver specified, ignoring this device.
[    11.457] (II) This device may have been added with another device file.
[    11.457] (II) config/udev: Adding drm device (/dev/dri/card0)
[    11.458] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    11.458] (II) No input driver specified, ignoring this device.
[    11.458] (II) This device may have been added with another device file.
[    25.136] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22136
[    25.136] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    25.136] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    25.136] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    25.136] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[    25.136] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    25.136] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    31.463] (II) NOUVEAU(0): EDID vendor "GSM", prod id 22136
[    31.463] (II) NOUVEAU(0): Using hsync ranges from config file
[    31.463] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    31.463] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    31.463] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[    31.463] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    31.463] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)

Ich möchte schon ein Treiber von Nvidia installieren, weiß allerdings nicht wo der Fehler liegt.

spoensche · 4 Okt. 2014

Code:

[    10.295] (II) LoadModule: "nvidia"
[    10.296] (WW) Warning, couldn't open module nvidia
[    10.296] (II) UnloadModule: "nvidia"
[    10.296] (II) Unloading nvidia
[    10.296] (EE) Failed to load module "nvidia" (module does not exist, 0)

War zu diesem Zeitpunkt der propiertäre NVidia Treiber installiert? Wenn ja, dann ist etwas bei der Installation was in die Hose gegangen und/oder der Treiber für den X-Server ist nicht mit installiert worden.

Welche Pakete hattest du aus dem Nvidia Repo installiert?

dietterle65 · 4 Okt. 2014

https://imageshack.com/i/idowdwnkj

Die 3 oberen Treiber waren mit installiert.

tomm.fa · 4 Okt. 2014

Waren nvidia-gfxG03-default und nvidia-gfxG03-pae zusammen installiert? Wenn man von deiner Signatur ausgeht, dann müsstest du nvidia-gfxG03-desktop, nvidia-computeG03 und x11-video-nvidia-G03 installieren (wenn's mit der Grafikkarte passt). Zeige doch (noch)mal die Ausgaben von:

Code:

lsb-release -a

Code:

uname -a

Code:

/sbin/lspci -nnk | grep -EiA3 "vga|3d|graph"

Code:

zypper se -si kernel kmp

dietterle65 · 4 Okt. 2014

Code:

 lsb-release -a
LSB Version:    n/a
Distributor ID: openSUSE project
Description:    openSUSE 13.1 (Bottle) (x86_64)
Release:        13.1
Codename:       Bottle

Code:

 uname -a
Linux betonklotz 3.11.10-21-desktop #1 SMP PREEMPT Mon Jul 21 15:28:46 UTC 2014 (9a9565d) x86_64 x86_64 x86_64 GNU/Linux

Code:

 /sbin/lspci -nnk | grep -EiA3 "vga|3d|graph"
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation G84 [GeForce 8600 GT] [10de:0402] (rev a1)
        Kernel driver in use: nouveau
        Kernel modules: nvidiafb, nouveau
03:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge [10b5:8112] (rev aa)

Code:

 zypper -se -si kernel kmp
Unbekanntes Kommando 'kernel'
Geben Sie 'zypper help' ein, um eine Liste der globalen Optionen und Kommandos zu erhalten.

tomm.fa · 4 Okt. 2014

dietterle65 schrieb:

se statt -se, hatte es zuvor falsch geschrieben.

dietterle65 · 4 Okt. 2014

Code:

 zypper se -si kernel kmp
Daten des Repositories laden ...
Installierte Pakete lesen ...

S | Name            | Typ   | Version            | Arch   | Repository          
--+-----------------+-------+--------------------+--------+---------------------
i | kernel-desktop  | Paket | 3.11.10-21.1       | x86_64 | openSUSE-13.1-Update
i | kernel-devel    | Paket | 3.11.10-21.1       | noarch | openSUSE-13.1-Update
i | kernel-firmware | Paket | 20130714git-2.21.1 | noarch | openSUSE-13.1-Update
i | kernel-source   | Paket | 3.11.10-21.1       | noarch | openSUSE-13.1-Update

dietterle65 · 5 Okt. 2014

Mahlzeit,

S: Linux 3.11.10-21-desktop x86_64
Current user: thomas@betonklotz
System: openSUSE 13.1 (x86_64)
KDE: 4.11.5
Display Info
Vendor: nVidia Corporation
Model: GeForce 8600 GT
2D driver: nouveau

das System läuft jetzt mit dem Nouveau Treiber.

Ich hätte schon einen 3D Treiber von Nvidia installiert.

"oder der Treiber für den X-Server ist nicht mit installiert worden."

Welcher wäre das?
http://img5.fotos-hochladen.net/uploads/bildschirmfoto1kw8yctixgb.jpg

Das zeigt mir Yast an, wenn ich auf nvidia-xxxxx- desktop klicke, muß das alles so dazu?

gruß

Sauerland · 5 Okt. 2014

Poste bitte:

Code:

zypper se -si nvidia

In dem von Dir geposteten Bild sollen auch noch G01- zusätzlich zu G03-Paketen installiert werden. Das ist gar nicht gut.

Wenn man die Ausgabe hat, kann man sagen, was Du installieren solltest.
Da ich nicht weiß, wie die Treiber weiterhin gebaut werden, würde ich evtl. auch einmal über die Installation des G02 Treibers nachdenken, da ab Version 343:

Für die Grafikprozessoren G8x, G9x und GT2xx und die auf diesen basierenden Mainboardchipsätze wird keine Unterstützung mehr gewährt. Dauerhafte Unterstützung für neue Linux-Kernel und X-Server wird es bis Ende 2019 in den Legacy-Versionen 340.* geben. Dort werden auch kritische Bugs behoben sein.

dietterle65 · 5 Okt. 2014

Code:

 zypper se -si nvidia
Daten des Repositories laden ...
Installierte Pakete lesen ...

S | Name                      | Typ   | Version               | Arch   | Repository
--+---------------------------+-------+-----------------------+--------+-----------
i | nvidia-gfxG03-kmp-desktop | Paket | 340.32_k3.11.6_4-31.1 | x86_64 | Nvidia

Code:

lsmod
Module                  Size  Used by
fuse                   95850  3 
rfcomm                 73157  12 
vboxpci                23227  0 
vboxnetadp             25670  0 
vboxnetflt             23517  0 
af_packet              39774  6 
vboxdrv               422060  3 vboxpci,vboxnetadp,vboxnetflt
bnep                   19704  2 
snd_hda_codec_via      27860  1 
arc4                   12608  2 
rc_dib0700_rc5         12508  0 
joydev                 17332  0 
dvb_usb_dib0700       144289  0 
dib7000p               38420  2 dvb_usb_dib0700
dib0090                38185  1 dvb_usb_dib0700
dib7000m               22854  1 dvb_usb_dib0700
dib0070                18232  2 dvb_usb_dib0700
dvb_usb                28311  1 dvb_usb_dib0700
dib8000                61454  1 dvb_usb_dib0700
dvb_core              125656  3 dib7000p,dvb_usb,dib8000
dib3000mc              23239  1 dvb_usb_dib0700
rc_core                31774  4 rc_dib0700_rc5,dvb_usb_dib0700,dvb_usb
dibx000_common         18752  5 dvb_usb_dib0700,dib7000p,dib7000m,dib8000,dib3000mc
btusb                  32266  0 
bluetooth             396742  32 rfcomm,bnep,btusb
snd_hda_intel          48171  3 
snd_hda_codec         205080  2 snd_hda_codec_via,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               110211  2 snd_hda_intel,snd_hda_codec
snd_seq                69752  0 
snd_timer              29423  2 snd_pcm,snd_seq
snd_seq_device         14497  1 snd_seq
snd                    87501  14 snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore              15047  1 snd
ath9k                 109640  0 
mac80211              635601  1 ath9k
ath9k_common           13859  1 ath9k
ath9k_hw              440385  2 ath9k,ath9k_common
ath                    27923  3 ath9k,ath9k_common,ath9k_hw
snd_page_alloc         18710  2 snd_hda_intel,snd_pcm
cfg80211              522716  3 ath9k,mac80211,ath
rfkill                 26487  4 bluetooth,cfg80211
firewire_ohci          40327  0 
firewire_core          72732  1 firewire_ohci
crc_itu_t              12707  1 firewire_core
forcedeth              71556  0 
ppdev                  17671  0 
serio_raw              13413  0 
i2c_nforce2            13221  0 
sr_mod                 22411  0 
shpchp                 32936  0 
kvm_amd                64123  0 
kvm                   469295  1 kvm_amd
edac_core              62342  0 
edac_mce_amd           22617  0 
pcspkr                 12718  0 
cdrom                  46652  1 sr_mod
k10temp                13126  0 
ata_generic            12910  0 
pata_amd               18225  0 
parport_pc             37278  0 
parport                46360  2 ppdev,parport_pc
acpi_cpufreq           19790  0 
mperf                  12667  1 acpi_cpufreq
sg                     40629  0 
dm_mod                 92428  0 
autofs4                42770  2 
nouveau              1013347  3 
ttm                    92265  1 nouveau
drm_kms_helper         56806  1 nouveau
drm                   313440  5 nouveau,ttm,drm_kms_helper
i2c_algo_bit           13413  1 nouveau
mxm_wmi                13021  1 nouveau
video                  19507  1 nouveau
wmi                    19070  2 nouveau,mxm_wmi
sata_nv                31841  3 
ohci_pci               13561  0 
button                 13952  1 nouveau
processor              44641  1 acpi_cpufreq
thermal_sys            36646  2 video,processor
scsi_dh_alua           17295  0 
scsi_dh_hp_sw          12895  0 
scsi_dh_rdac           17447  0 
scsi_dh_emc            17258  0 
scsi_dh                14882  4 scsi_dh_alua,scsi_dh_hp_sw,scsi_dh_rdac,scsi_dh_emc

Code:

zypper se -si nouveau
Daten des Repositories laden ...
Installierte Pakete lesen ...

S | Name                          | Typ   | Version      | Arch   | Repository       
--+-------------------------------+-------+--------------+--------+------------------
i | libdrm_nouveau2               | Paket | 2.4.46-3.2.2 | x86_64 | openSUSE-13.1-Oss
i | xorg-x11-driver-video-nouveau | Paket | 1.0.9-3.1.2  | x86_64 | openSUSE-13.1-Oss

muß ich nouveau löschen?

installiert ist Nvidia, geladen wird er nicht

...und es startet erst mal und läuft.

Sauerland · 5 Okt. 2014

Als root:

Code:

zypper in -f x11-video-nvidiaG03 nvidia-gfxG03-kmp-desktop nvidia-glG03 nvidia-computeG03 nvidia-uvm-gfxG03-kmp-desktop

dietterle65 · 5 Okt. 2014

Die Installation hat geklappt, System ist gestartet.

Code:

 hwinfo --gfxcard
30: PCI 200.0: 0300 VGA compatible controller (VGA)             
  [Created at pci.319]
  Unique ID: B35A.QrK1+wp+3C7
  Parent ID: WL76.5wNWUrlOQmD
  SysFS ID: /devices/pci0000:00/0000:00:09.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: graphics card
  Model: "nVidia GeForce 8600 GT"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0402 "GeForce 8600 GT"
  Revision: 0xa1
  Driver: "nvidia"
  Driver Modules: "nvidia"
  Memory Range: 0xfa000000-0xfaffffff (rw,non-prefetchable)
  Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
  Memory Range: 0xf8000000-0xf9ffffff (rw,non-prefetchable)
  I/O Ports: 0xec00-0xec7f (rw)
  Memory Range: 0xfbee0000-0xfbefffff (ro,non-prefetchable,disabled)
  IRQ: 17 (no events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd00000402sv00000000sd00000000bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: nv
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #21 (PCI bridge)

Primary display adapter: #30

Jetzt muß ich noch die 3D Unterstützung aktivieren.

dietterle65 · 5 Okt. 2014

Leider doch kein Erfolg, der Rechner startet, um dann auf der konsole mit dem Login zu enden.

geschrieben vom Laptop

den treiber habe ich gelöscht: x11-video-nvidiaG03

Jetzt startet das graphische system wieder, die 3d Unterstützungbzw. OpenGL fehlt jetzt noch - was muß ich tun?

Meine 12.2. lief und lief

Sauerland · 5 Okt. 2014

Poste:

Code:

zypper se -si nvidia kernel

Poste die komplette Ausgabe incl. des eingegebenen Befehls bis zum Abbruch:

Code:

zypper in -f x11-video-nvidiaG03 nvidia-gfxG03-kmp-desktop nvidia-glG03 nvidia-computeG03

Diesen Befehl nicht ausführen sondern abbrechen.

dietterle65 · 5 Okt. 2014

Code:

zypper se -si nvidia kernel
Daten des Repositories laden ...
Installierte Pakete lesen ...

S | Name                      | Typ   | Version               | Arch   | Repository          
--+---------------------------+-------+-----------------------+--------+---------------------
i | kernel-desktop            | Paket | 3.11.10-21.1          | x86_64 | openSUSE-13.1-Update
i | kernel-desktop-devel      | Paket | 3.11.10-21.1          | x86_64 | openSUSE-13.1-Update
i | kernel-devel              | Paket | 3.11.10-21.1          | noarch | openSUSE-13.1-Update
i | kernel-firmware           | Paket | 20130714git-2.21.1    | noarch | openSUSE-13.1-Update
i | kernel-source             | Paket | 3.11.10-21.1          | noarch | openSUSE-13.1-Update
i | nvidia-gfxG03-kmp-desktop | Paket | 340.32_k3.11.6_4-31.1 | x86_64 | Nvidia              
i | nvidia-glG03              | Paket | 340.32-31.1           | x86_64 | Nvidia

Code:

 zypper in -f x11-video-nvidiaG03 nvidia-gfxG03-kmp-desktop nvidia-glG03 nvidia-computeG03
Daten des Repositories laden ...
Installierte Pakete lesen ...
Installation von 'x11-video-nvidiaG03-340.32-31.1.x86_64' aus Repository 'Nvidia' wird erzwungen.
Installation von 'nvidia-glG03-340.32-31.1.x86_64' aus Repository 'Nvidia' wird erzwungen.
Installation von 'nvidia-gfxG03-kmp-desktop-340.32_k3.11.6_4-31.1.x86_64' aus Repository 'Nvidia' wird erzwungen.
Installation von 'nvidia-computeG03-340.32-31.1.x86_64' aus Repository 'Nvidia' wird erzwungen.
Paketabhängigkeiten auflösen ...

The following 2 NEW packages are going to be installed:
  nvidia-computeG03 x11-video-nvidiaG03 

The following 2 packages are going to be reinstalled:
  nvidia-gfxG03-kmp-desktop-340.32_k3.11.6_4-31.1 nvidia-glG03 

2 neue Pakete zu installieren, 2 erneut zu installieren.
Gesamtgröße des Downloads: 66,5 MiB. Nach der Operation werden zusätzlich 167,2 MiB belegt.
Fortfahren? [j/n/? zeigt alle Optionen] (j):

Ich habe jetzt alles aus dem Repo Nvidia deinstalliert. Jetzt geht`s mit Nouveau.

Code:

hwinfo --gfxcard
30: PCI 200.0: 0300 VGA compatible controller (VGA)             
  [Created at pci.319]
  Unique ID: B35A.QrK1+wp+3C7
  Parent ID: WL76.5wNWUrlOQmD
  SysFS ID: /devices/pci0000:00/0000:00:09.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: graphics card
  Model: "nVidia GeForce 8600 GT"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0402 "GeForce 8600 GT"
  Revision: 0xa1
  Driver: "nouveau"
  Driver Modules: "drm"
  Memory Range: 0xfa000000-0xfaffffff (rw,non-prefetchable)
  Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
  Memory Range: 0xf8000000-0xf9ffffff (rw,non-prefetchable)
  I/O Ports: 0xec00-0xec7f (rw)
  Memory Range: 0xfbee0000-0xfbefffff (ro,non-prefetchable,disabled)
  IRQ: 17 (5000 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd00000402sv00000000sd00000000bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: nv
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #21 (PCI bridge)

Primary display adapter: #30

Morgen wieder!

dietterle65 · 6 Okt. 2014

Ich glaube und hoffe, die Lösung gefunden zu haben:

Code:

 zypper se -si nvidia kernel
Daten des Repositories laden ...
Installierte Pakete lesen ...

S | Name                      | Typ   | Version                | Arch   | Repository          
--+---------------------------+-------+------------------------+--------+---------------------
i | kernel-desktop            | Paket | 3.11.10-21.1           | x86_64 | openSUSE-13.1-Update
i | kernel-desktop-devel      | Paket | 3.11.10-21.1           | x86_64 | openSUSE-13.1-Update
i | kernel-devel              | Paket | 3.11.10-21.1           | noarch | openSUSE-13.1-Update
i | kernel-firmware           | Paket | 20130714git-2.21.1     | noarch | openSUSE-13.1-Update
i | kernel-source             | Paket | 3.11.10-21.1           | noarch | openSUSE-13.1-Update
i | nvidia-computeG02         | Paket | 304.121-38.1           | x86_64 | Nvidia              
i | nvidia-gfxG02-kmp-desktop | Paket | 304.121_k3.11.6_4-37.1 | x86_64 | Nvidia              
i | x11-video-nvidiaG02       | Paket | 304.121-38.1           | x86_64 | Nvidia

Ich habe den 340.xxx Treiber komplett gelöscht und den 304.xxx Treiber installiert!

Bis jetzt geht es.

[gelöst]Neuinstallation 13.1 kein graphisches system

dietterle65

Hacker

dietterle65

Hacker

spoensche

Moderator

dietterle65

Hacker

tomm.fa

Administrator

dietterle65

Hacker

tomm.fa

Administrator

dietterle65

Hacker

dietterle65

Hacker

Sauerland

Ultimate Guru

dietterle65

Hacker

Sauerland

Ultimate Guru

dietterle65

Hacker

dietterle65

Hacker

Sauerland

Ultimate Guru

dietterle65

Hacker

dietterle65

Hacker