nach nicht Kernel update Grafik problem

sapo · 12 Mai 2014

hab gestern ein Update via Jast gemacht, da war meinens Wissens kein Kernel und kein Nvidia drin.
Jetzt kann ich Opensuse starten, wenn ich Grub
openSUSE 13.1, mit Linux 3.11.6-4-desktop
wähle, wenn ich
openSUSE 13.1, mit Linux 3.11.10-7-desktop
wähle, stirbt der X-server:

Code:

X server died during startup

Der Kernel ist doch nicht neu, oder?
Nvidia und Kernel nochmals installiert hilft auch nicht.
Hat jemand eine Idee?

towo · 12 Mai 2014

Hat jemand eine Idee?

Nein, weil Du keinerlei relevante Infos lieferst, wie zum Bleistift entsprechende Logfiles.
Kein Mensch hier hat eine Glaskugel, die er zu Deinem Problem befragen kann.

sapo · 13 Mai 2014

und welches Log hilft weiter?

X server died during startup

stammt aus dem Messages log

towo · 13 Mai 2014

Wie wäre es mit /var/log/Xorg.0.log?

sapo · 13 Mai 2014

also mit problematischen
openSUSE 13.1, mit Linux 3.11.10-7-desktop

Code:

[    23.784] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    23.784] 
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[    23.784] X Protocol Version 11, Revision 0
[    23.784] Build Operating System: openSUSE SUSE LINUX
[    23.784] Current Operating System: Linux linux-sapo 3.11.10-7-desktop #1 SMP PREEMPT Mon Feb 3 09:41:24 UTC 2014 (750023e) x86_64
[    23.784] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-7-desktop root=UUID=841578e5-3cbe-4618-b7ba-ce6aa8ccb8d3 resume=/dev/disk/by-id/ata-Corsair_Force_3_SSD_11246518000007435529-part2 splash=silent quiet showopts vga=0x31b
[    23.784] Build Date: 17 April 2014  05:37:34AM
[    23.784]  
[    23.784] Current version of pixman: 0.30.2
[    23.784] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    23.784] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.785] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 13 22:35:37 2014
[    23.785] (==) Using config file: "/etc/X11/xorg.conf"
[    23.785] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    23.785] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.785] (==) ServerLayout "Layout0"
[    23.785] (**) |-->Screen "Screen0" (0)
[    23.785] (**) |   |-->Monitor "Monitor0"
[    23.785] (**) |   |-->Device "Device0"
[    23.785] (**) |-->Input Device "Keyboard0"
[    23.785] (**) |-->Input Device "Mouse0"
[    23.785] (==) Automatically adding devices
[    23.785] (==) Automatically enabling devices
[    23.785] (==) Automatically adding GPU devices
[    23.785] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    23.785] 	Entry deleted from font path.
[    23.785] (==) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/ghostscript/,
	/usr/share/fonts/cyrillic:unscaled,
	/usr/share/fonts/truetype/,
	built-ins
[    23.785] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[    23.785] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    23.785] (WW) Disabling Keyboard0
[    23.785] (WW) Disabling Mouse0
[    23.785] (II) Loader magic: 0x803c20
[    23.785] (II) Module ABI versions:
[    23.785] 	X.Org ANSI C Emulation: 0.4
[    23.785] 	X.Org Video Driver: 14.1
[    23.785] 	X.Org XInput driver : 19.1
[    23.785] 	X.Org Server Extension : 7.0
[    23.785] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.913] (--) PCI: (0:0:2:0) 8086:0152:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xc0000000/268435456, I/O @ 0x0000ff00/64
[    23.913] (--) PCI:*(0:1:0:0) 10de:0a65:1043:8354 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/524288
[    23.913] Initializing built-in extension Generic Event Extension
[    23.913] Initializing built-in extension SHAPE
[    23.913] Initializing built-in extension MIT-SHM
[    23.913] Initializing built-in extension XInputExtension
[    23.913] Initializing built-in extension XTEST
[    23.913] Initializing built-in extension BIG-REQUESTS
[    23.913] Initializing built-in extension SYNC
[    23.913] Initializing built-in extension XKEYBOARD
[    23.913] Initializing built-in extension XC-MISC
[    23.913] Initializing built-in extension SECURITY
[    23.913] Initializing built-in extension XINERAMA
[    23.913] Initializing built-in extension XFIXES
[    23.913] Initializing built-in extension RENDER
[    23.913] Initializing built-in extension RANDR
[    23.913] Initializing built-in extension COMPOSITE
[    23.913] Initializing built-in extension DAMAGE
[    23.913] Initializing built-in extension MIT-SCREEN-SAVER
[    23.913] Initializing built-in extension DOUBLE-BUFFER
[    23.913] Initializing built-in extension RECORD
[    23.913] Initializing built-in extension DPMS
[    23.913] Initializing built-in extension X-Resource
[    23.913] Initializing built-in extension XVideo
[    23.913] Initializing built-in extension XVideo-MotionCompensation
[    23.913] Initializing built-in extension XFree86-VidModeExtension
[    23.913] Initializing built-in extension XFree86-DGA
[    23.913] Initializing built-in extension XFree86-DRI
[    23.913] Initializing built-in extension DRI2
[    23.913] (II) "glx" will be loaded by default.
[    23.913] (II) LoadModule: "dri2"
[    23.913] (II) Module "dri2" already built-in
[    23.913] (II) LoadModule: "glamoregl"
[    23.916] (WW) Warning, couldn't open module glamoregl
[    23.916] (II) UnloadModule: "glamoregl"
[    23.916] (II) Unloading glamoregl
[    23.916] (EE) Failed to load module "glamoregl" (module does not exist, 0)
[    23.916] (II) LoadModule: "glx"
[    23.916] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    23.999] (II) Module glx: vendor="NVIDIA Corporation"
[    23.999] 	compiled for 4.0.2, module version = 1.0.0
[    23.999] 	Module class: X.Org Server Extension
[    23.999] (II) NVIDIA GLX Module  331.67  Fri Apr  4 11:43:47 PDT 2014
[    24.000] Loading extension GLX
[    24.000] (II) LoadModule: "nvidia"
[    24.000] (II) Loading /usr/lib64/xorg/modules/updates/drivers/nvidia_drv.so
[    24.000] (II) Module nvidia: vendor="NVIDIA Corporation"
[    24.000] 	compiled for 4.0.2, module version = 1.0.0
[    24.000] 	Module class: X.Org Video Driver
[    24.000] (II) NVIDIA dlloader X Driver  331.67  Fri Apr  4 11:24:40 PDT 2014
[    24.000] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    24.000] (++) using VT number 7

[    24.000] (II) Loading sub module "fb"
[    24.000] (II) LoadModule: "fb"
[    24.000] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    24.000] (II) Module fb: vendor="X.Org Foundation"
[    24.000] 	compiled for 1.14.3.901, module version = 1.0.0
[    24.000] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    24.000] (WW) Unresolved symbol: fbGetGCPrivateKey
[    24.000] (II) Loading sub module "wfb"
[    24.000] (II) LoadModule: "wfb"
[    24.001] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    24.001] (II) Module wfb: vendor="X.Org Foundation"
[    24.001] 	compiled for 1.14.3.901, module version = 1.0.0
[    24.001] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    24.001] (II) Loading sub module "ramdac"
[    24.001] (II) LoadModule: "ramdac"
[    24.001] (II) Module "ramdac" already built-in
[    24.002] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[    24.002] (EE) NVIDIA:     system's kernel log for additional error messages.
[    24.002] (EE) No devices detected.
[    24.002] (EE) 
Fatal server error:
[    24.002] (EE) no screens found(EE) 
[    24.002] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    24.002] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    24.002] (EE)

mit funktionierendem
openSUSE 13.1, mit Linux 3.11.6-4-desktop

Code:

[    23.917] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    23.917] 
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[    23.917] X Protocol Version 11, Revision 0
[    23.917] Build Operating System: openSUSE SUSE LINUX
[    23.917] Current Operating System: Linux linux-sapo 3.11.6-4-desktop #1 SMP PREEMPT Wed Oct 30 18:04:56 UTC 2013 (e6d4a27) x86_64
[    23.917] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.6-4-desktop root=UUID=841578e5-3cbe-4618-b7ba-ce6aa8ccb8d3 resume=/dev/disk/by-id/ata-Corsair_Force_3_SSD_11246518000007435529-part2 splash=silent quiet showopts vga=0x31b
[    23.917] Build Date: 17 April 2014  05:37:34AM
[    23.917]  
[    23.917] Current version of pixman: 0.30.2
[    23.917] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    23.917] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.917] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 13 22:41:48 2014
[    23.917] (==) Using config file: "/etc/X11/xorg.conf"
[    23.917] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    23.917] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.917] (==) ServerLayout "Layout0"
[    23.917] (**) |-->Screen "Screen0" (0)
[    23.917] (**) |   |-->Monitor "Monitor0"
[    23.917] (**) |   |-->Device "Device0"
[    23.917] (**) |-->Input Device "Keyboard0"
[    23.917] (**) |-->Input Device "Mouse0"
[    23.917] (==) Automatically adding devices
[    23.917] (==) Automatically enabling devices
[    23.917] (==) Automatically adding GPU devices
[    23.922] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    23.922] 	Entry deleted from font path.
[    23.923] (==) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/ghostscript/,
	/usr/share/fonts/cyrillic:unscaled,
	/usr/share/fonts/truetype/,
	built-ins
[    23.923] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[    23.923] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    23.923] (WW) Disabling Keyboard0
[    23.923] (WW) Disabling Mouse0
[    23.923] (II) Loader magic: 0x803c20
[    23.923] (II) Module ABI versions:
[    23.923] 	X.Org ANSI C Emulation: 0.4
[    23.923] 	X.Org Video Driver: 14.1
[    23.923] 	X.Org XInput driver : 19.1
[    23.923] 	X.Org Server Extension : 7.0
[    23.923] (II) xfree86: Adding drm device (/dev/dri/card1)
[    23.923] (II) xfree86: Adding drm device (/dev/dri/card0)
[    24.050] (--) PCI: (0:0:2:0) 8086:0152:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xc0000000/268435456, I/O @ 0x0000ff00/64
[    24.050] (--) PCI:*(0:1:0:0) 10de:0a65:1043:8354 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/524288
[    24.050] Initializing built-in extension Generic Event Extension
[    24.050] Initializing built-in extension SHAPE
[    24.050] Initializing built-in extension MIT-SHM
[    24.050] Initializing built-in extension XInputExtension
[    24.050] Initializing built-in extension XTEST
[    24.050] Initializing built-in extension BIG-REQUESTS
[    24.050] Initializing built-in extension SYNC
[    24.050] Initializing built-in extension XKEYBOARD
[    24.050] Initializing built-in extension XC-MISC
[    24.050] Initializing built-in extension SECURITY
[    24.050] Initializing built-in extension XINERAMA
[    24.050] Initializing built-in extension XFIXES
[    24.050] Initializing built-in extension RENDER
[    24.050] Initializing built-in extension RANDR
[    24.050] Initializing built-in extension COMPOSITE
[    24.050] Initializing built-in extension DAMAGE
[    24.050] Initializing built-in extension MIT-SCREEN-SAVER
[    24.050] Initializing built-in extension DOUBLE-BUFFER
[    24.050] Initializing built-in extension RECORD
[    24.050] Initializing built-in extension DPMS
[    24.050] Initializing built-in extension X-Resource
[    24.050] Initializing built-in extension XVideo
[    24.050] Initializing built-in extension XVideo-MotionCompensation
[    24.050] Initializing built-in extension XFree86-VidModeExtension
[    24.050] Initializing built-in extension XFree86-DGA
[    24.050] Initializing built-in extension XFree86-DRI
[    24.050] Initializing built-in extension DRI2
[    24.050] (II) "glx" will be loaded by default.
[    24.050] (II) LoadModule: "dri2"
[    24.050] (II) Module "dri2" already built-in
[    24.050] (II) LoadModule: "glamoregl"
[    24.052] (WW) Warning, couldn't open module glamoregl
[    24.053] (II) UnloadModule: "glamoregl"
[    24.053] (II) Unloading glamoregl
[    24.053] (EE) Failed to load module "glamoregl" (module does not exist, 0)
[    24.053] (II) LoadModule: "glx"
[    24.053] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    24.137] (II) Module glx: vendor="NVIDIA Corporation"
[    24.137] 	compiled for 4.0.2, module version = 1.0.0
[    24.137] 	Module class: X.Org Server Extension
[    24.137] (II) NVIDIA GLX Module  331.67  Fri Apr  4 11:43:47 PDT 2014
[    24.137] Loading extension GLX
[    24.137] (II) LoadModule: "nvidia"
[    24.137] (II) Loading /usr/lib64/xorg/modules/updates/drivers/nvidia_drv.so
[    24.138] (II) Module nvidia: vendor="NVIDIA Corporation"
[    24.138] 	compiled for 4.0.2, module version = 1.0.0
[    24.138] 	Module class: X.Org Video Driver
[    24.138] (II) NVIDIA dlloader X Driver  331.67  Fri Apr  4 11:24:40 PDT 2014
[    24.138] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    24.138] (++) using VT number 7

[    24.138] (II) Loading sub module "fb"
[    24.138] (II) LoadModule: "fb"
[    24.138] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    24.138] (II) Module fb: vendor="X.Org Foundation"
[    24.138] 	compiled for 1.14.3.901, module version = 1.0.0
[    24.138] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    24.138] (WW) Unresolved symbol: fbGetGCPrivateKey
[    24.138] (II) Loading sub module "wfb"
[    24.138] (II) LoadModule: "wfb"
[    24.138] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    24.139] (II) Module wfb: vendor="X.Org Foundation"
[    24.139] 	compiled for 1.14.3.901, module version = 1.0.0
[    24.139] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    24.139] (II) Loading sub module "ramdac"
[    24.139] (II) LoadModule: "ramdac"
[    24.139] (II) Module "ramdac" already built-in
[    24.139] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    24.139] (==) NVIDIA(0): RGB weight 888
[    24.139] (==) NVIDIA(0): Default visual is TrueColor
[    24.139] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    24.139] (**) NVIDIA(0): Enabling 2D acceleration
[    24.633] (II) NVIDIA(0): Display (Samsung SMBX2440 (DFP-1)) does not support NVIDIA 3D
[    24.633] (II) NVIDIA(0):     Vision stereo.
[    24.633] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[    24.633] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[    24.633] (--) NVIDIA(0): Memory: 1048576 kBytes
[    24.634] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.06
[    24.634] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    24.635] (--) NVIDIA(0): Valid display device(s) on GeForce 210 at PCI:1:0:0
[    24.635] (--) NVIDIA(0):     CRT-0
[    24.635] (--) NVIDIA(0):     CRT-1
[    24.635] (--) NVIDIA(0):     DFP-0
[    24.635] (--) NVIDIA(0):     Samsung SMBX2440 (DFP-1) (boot, connected)
[    24.635] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    24.635] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    24.635] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    24.635] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    24.635] (--) NVIDIA(0): Samsung SMBX2440 (DFP-1): Internal Single Link TMDS
[    24.635] (--) NVIDIA(0): Samsung SMBX2440 (DFP-1): 165.0 MHz maximum pixel clock
[    24.635] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    24.635] (**) NVIDIA(0):     device Samsung SMBX2440 (DFP-1) (Using EDID frequencies
[    24.635] (**) NVIDIA(0):     has been enabled on all display devices.)
[    24.635] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2440 (DFP-1) contradicts itself: mode
[    24.635] (WW) NVIDIA(GPU-0):     "1920x1080" is specified in the EDID; however, the EDID's
[    24.635] (WW) NVIDIA(GPU-0):     valid VertRefresh range (56.000-75.000 Hz) would exclude
[    24.635] (WW) NVIDIA(GPU-0):     this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[    24.635] (WW) NVIDIA(GPU-0):     check for mode "1920x1080".
[    24.635] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2440 (DFP-1) contradicts itself: mode
[    24.635] (WW) NVIDIA(GPU-0):     "1280x720" is specified in the EDID; however, the EDID's
[    24.635] (WW) NVIDIA(GPU-0):     valid VertRefresh range (56.000-75.000 Hz) would exclude
[    24.635] (WW) NVIDIA(GPU-0):     this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[    24.635] (WW) NVIDIA(GPU-0):     check for mode "1280x720".
[    24.636] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2440 (DFP-1) contradicts itself: mode
[    24.636] (WW) NVIDIA(GPU-0):     "720x576" is specified in the EDID; however, the EDID's
[    24.636] (WW) NVIDIA(GPU-0):     valid VertRefresh range (56.000-75.000 Hz) would exclude
[    24.636] (WW) NVIDIA(GPU-0):     this mode's VertRefresh (50.0 Hz); ignoring VertRefresh
[    24.636] (WW) NVIDIA(GPU-0):     check for mode "720x576".
[    24.637] (==) NVIDIA(0): 
[    24.637] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    24.637] (==) NVIDIA(0):     will be used as the requested mode.
[    24.637] (==) NVIDIA(0): 
[    24.637] (II) NVIDIA(0): Validated MetaModes:
[    24.637] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select"
[    24.637] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    24.674] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[    24.674] (--) NVIDIA(0):     option
[    24.674] (--) Depth 24 pixmap format is 32 bpp
[    24.674] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    24.676] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    24.676] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    24.676] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    24.676] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    24.676] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    24.676] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    24.676] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    24.676] (II) NVIDIA(0):     Config Options in the README.
[    24.677] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[    24.712] Loading extension NV-GLX
[    24.732] (==) NVIDIA(0): Disabling shared memory pixmaps
[    24.732] (==) NVIDIA(0): Backing store disabled
[    24.732] (==) NVIDIA(0): Silken mouse enabled
[    24.732] (**) NVIDIA(0): DPMS enabled
[    24.732] Loading extension NV-CONTROL
[    24.732] Loading extension XINERAMA
[    24.732] (II) Loading sub module "dri2"
[    24.732] (II) LoadModule: "dri2"
[    24.732] (II) Module "dri2" already built-in
[    24.732] (II) NVIDIA(0): [DRI2] Setup complete
[    24.732] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    24.732] (--) RandR disabled
[    24.735] (II) Initializing extension GLX
[    24.785] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    24.785] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.785] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.785] (**) Power Button: Applying InputClass "LocalKeyboard"
[    24.785] (II) LoadModule: "evdev"
[    24.785] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    24.786] (II) Module evdev: vendor="X.Org Foundation"
[    24.786] 	compiled for 1.14.3, module version = 2.8.2
[    24.786] 	Module class: X.Org XInput Driver
[    24.786] 	ABI class: X.Org XInput driver, version 19.1
[    24.786] (II) Using input driver 'evdev' for 'Power Button'
[    24.786] (**) Power Button: always reports core events
[    24.786] (**) evdev: Power Button: Device: "/dev/input/event3"
[    24.786] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.786] (--) evdev: Power Button: Found keys
[    24.786] (II) evdev: Power Button: Configuring as keyboard
[    24.786] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    24.786] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.786] (**) Option "xkb_rules" "evdev"
[    24.786] (**) Option "xkb_model" "pc104"
[    24.786] (**) Option "xkb_layout" "ch"
[    24.786] (**) Option "xkb_variant" "de"
[    24.799] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    24.799] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.799] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.799] (**) Power Button: Applying InputClass "LocalKeyboard"
[    24.799] (II) Using input driver 'evdev' for 'Power Button'
[    24.799] (**) Power Button: always reports core events
[    24.799] (**) evdev: Power Button: Device: "/dev/input/event2"
[    24.799] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.799] (--) evdev: Power Button: Found keys
[    24.799] (II) evdev: Power Button: Configuring as keyboard
[    24.799] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    24.799] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    24.799] (**) Option "xkb_rules" "evdev"
[    24.799] (**) Option "xkb_model" "pc104"
[    24.799] (**) Option "xkb_layout" "ch"
[    24.799] (**) Option "xkb_variant" "de"
[    24.799] (II) config/udev: Adding drm device (/dev/dri/card1)
[    24.799] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[    24.799] (II) No input driver specified, ignoring this device.
[    24.799] (II) This device may have been added with another device file.
[    24.799] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[    24.799] (II) No input driver specified, ignoring this device.
[    24.799] (II) This device may have been added with another device file.
[    24.799] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[    24.799] (II) No input driver specified, ignoring this device.
[    24.799] (II) This device may have been added with another device file.
[    24.800] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[    24.800] (II) No input driver specified, ignoring this device.
[    24.800] (II) This device may have been added with another device file.
[    24.800] (II) config/udev: Adding drm device (/dev/dri/card0)
[    24.800] (II) config/udev: Adding input device IR-receiver inside an USB DVB receiver (/dev/input/event12)
[    24.800] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "evdev keyboard catchall"
[    24.800] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "evdev keyboard catchall"
[    24.800] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "LocalKeyboard"
[    24.800] (II) Using input driver 'evdev' for 'IR-receiver inside an USB DVB receiver'
[    24.800] (**) IR-receiver inside an USB DVB receiver: always reports core events
[    24.800] (**) evdev: IR-receiver inside an USB DVB receiver: Device: "/dev/input/event12"
[    24.800] (--) evdev: IR-receiver inside an USB DVB receiver: Vendor 0x734c Product 0x5680
[    24.800] (--) evdev: IR-receiver inside an USB DVB receiver: Found keys
[    24.800] (II) evdev: IR-receiver inside an USB DVB receiver: Configuring as keyboard
[    24.800] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/input/input12/event12"
[    24.800] (II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD, id 8)
[    24.800] (**) Option "xkb_rules" "evdev"
[    24.800] (**) Option "xkb_model" "pc104"
[    24.800] (**) Option "xkb_layout" "ch"
[    24.800] (**) Option "xkb_variant" "de"
[    24.800] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    24.800] (II) No input driver specified, ignoring this device.
[    24.800] (II) This device may have been added with another device file.
[    24.800] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[    24.800] (II) No input driver specified, ignoring this device.
[    24.800] (II) This device may have been added with another device file.
[    24.800] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[    24.800] (II) No input driver specified, ignoring this device.
[    24.800] (II) This device may have been added with another device file.
[    24.800] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event6)
[    24.800] (II) No input driver specified, ignoring this device.
[    24.800] (II) This device may have been added with another device file.
[    24.800] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[    24.801] (II) No input driver specified, ignoring this device.
[    24.801] (II) This device may have been added with another device file.
[    24.801] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[    24.801] (II) No input driver specified, ignoring this device.
[    24.801] (II) This device may have been added with another device file.
[    24.801] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[    24.801] (II) No input driver specified, ignoring this device.
[    24.801] (II) This device may have been added with another device file.
[    24.801] (II) config/udev: Adding input device Silitek IBM USB HUB KEYBOARD (/dev/input/event1)
[    24.801] (**) Silitek IBM USB HUB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[    24.801] (**) Silitek IBM USB HUB KEYBOARD: Applying InputClass "evdev keyboard catchall"
[    24.801] (**) Silitek IBM USB HUB KEYBOARD: Applying InputClass "LocalKeyboard"
[    24.801] (II) Using input driver 'evdev' for 'Silitek IBM USB HUB KEYBOARD'
[    24.801] (**) Silitek IBM USB HUB KEYBOARD: always reports core events
[    24.801] (**) evdev: Silitek IBM USB HUB KEYBOARD: Device: "/dev/input/event1"
[    24.801] (--) evdev: Silitek IBM USB HUB KEYBOARD: Vendor 0x4b3 Product 0x3005
[    24.801] (--) evdev: Silitek IBM USB HUB KEYBOARD: Found keys
[    24.801] (II) evdev: Silitek IBM USB HUB KEYBOARD: Configuring as keyboard
[    24.801] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1.1/2-1.6.1.1:1.0/input/input1/event1"
[    24.801] (II) XINPUT: Adding extended input device "Silitek IBM USB HUB KEYBOARD" (type: KEYBOARD, id 9)
[    24.801] (**) Option "xkb_rules" "evdev"
[    24.801] (**) Option "xkb_model" "pc104"
[    24.801] (**) Option "xkb_layout" "ch"
[    24.801] (**) Option "xkb_variant" "de"
[    24.801] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event0)
[    24.801] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    24.801] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    24.801] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[    24.801] (**) USB Optical Mouse: always reports core events
[    24.801] (**) evdev: USB Optical Mouse: Device: "/dev/input/event0"
[    24.801] (--) evdev: USB Optical Mouse: Vendor 0x4b3 Product 0x310c
[    24.801] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[    24.801] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[    24.801] (--) evdev: USB Optical Mouse: Found relative axes
[    24.801] (--) evdev: USB Optical Mouse: Found x and y relative axes
[    24.801] (II) evdev: USB Optical Mouse: Configuring as mouse
[    24.801] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[    24.801] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    24.801] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.801] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.4/2-1.6.4:1.0/input/input0/event0"
[    24.801] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[    24.801] (II) evdev: USB Optical Mouse: initialized for relative axes.
[    24.801] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    24.801] (**) USB Optical Mouse: (accel) acceleration profile 0
[    24.801] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    24.801] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    24.802] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    24.802] (II) No input driver specified, ignoring this device.
[    24.802] (II) This device may have been added with another device file.
[    24.802] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    24.802] (II) No input driver specified, ignoring this device.
[    24.802] (II) This device may have been added with another device file.
[    36.153] (II) NVIDIA(GPU-0): Display (Samsung SMBX2440 (DFP-1)) does not support NVIDIA 3D
[    36.153] (II) NVIDIA(GPU-0):     Vision stereo.
[    36.685] (II) NVIDIA(GPU-0): Display (Samsung SMBX2440 (DFP-1)) does not support NVIDIA 3D
[    36.685] (II) NVIDIA(GPU-0):     Vision stereo.

danke im voraus

towo · 13 Mai 2014

Und wie wäre es mit lesen? Zu dem neuem Kernel ist kein Kernelmodul vorhanden, ergo kann X auch nicht starten.

sapo · 15 Mai 2014

das Kernelmodul ist installiert nvidia-gfxG03-kmp-desktop.
Dass es nicht geladen wird, kkann ich auch lesen. Die Frage ist wieso?
Und die 2. Anmerkung ist, es hat ja vorher funktioniert, vor dem Nicht Kernel Update.
Das Nvidia update könnte es sein.
Wobei alle Nvidia deinstalliert und Nouveau installiert hat auch nicht funktioniert

josef-wien · 15 Mai 2014

sapo schrieb:
Die Frage ist wieso?

Hättest Du das Modul im Text-Modus geladen, würdest Du es wissen.

sapo schrieb:
Wobei alle Nvidia deinstalliert und Nouveau installiert

Was versprichst Du Dir von dieser Panik-Aktion? Welchen Zustand hat Dein System jetzt?

sapo schrieb:
hat auch nicht funktioniert

Mit dieser Aussage fängt niemand etwas an.
_______

Bei irgendeinem Kernel:

Code:

/sbin/lspci -nnk | grep -iA3 vga
find /lib/modules -name nvidia.ko
zypper se -si nvidia

Beim "neuen" Kernel:

Code:

grep nvidia.ko /lib/modules/$(uname -r)/modules.dep
dmesg | egrep -i "nvidia|nouveau|command"

(Siehe gegebenenfalls: http://www.linupedia.org/opensuse/Hilfe_zu_Antworten_aus_dem_Forum#Konsolausgabe_ins_Forum_posten.2C_wenn_Grafisch_nichts_geht)

spoensche · 15 Mai 2014

Code:

lsmod | egrep "nvidia|nouv"

sapo · 18 Mai 2014

martin@linux-sapo:~> lsmod | egrep "nvidia|nouv"
nvidia 10711624 39
drm 313440 4 nvidia,i915,drm_kms_helper

danke

josef-wien · 19 Mai 2014

Und wo bleibt der Rest?

nach nicht Kernel update Grafik problem

sapo

Hacker

towo

Moderator

sapo

Hacker

towo

Moderator

sapo

Hacker

towo

Moderator

sapo

Hacker

josef-wien

Ultimate Guru

spoensche

Moderator

sapo

Hacker

josef-wien

Ultimate Guru