Hallo habe Probleme meine 350 zu installieren.
Wer kann mir helfen
Habe suse 10.2. IVTV-0.10.5
Und Firmware nch /lib/firrmware kopiert
nach aufruf /sbin/modeProbe tuner kommt Fehler
Modul Tuner ist nicht vorhanden.
was ist mit meinen Encoder wie kann ich die richtige Firmware laden
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.0 (tagged release) loading
ivtv: Linux version: 2.6.18.8-0.1-default SMP mod_unload 586 REGPARM gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
PCI: Enabling device 0000:01:09.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 209
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
tveeprom 2-0050: Hauppauge model 48139, rev K2B7, serial# 9927729
tveeprom 2-0050: tuner model is Philips FM1216ME MK5 (idx 117, type 4)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 2-0050: audio processor is MSP4418 (idx 25)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has radio, has IR remote
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect
ivtv0: Encoder revision: 0x02060039
ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011, 0x02040024 or 0x02050032.
ivtv0: Decoder revision: 0x02020023
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG
ivtv0: Registered device vbi8 for decoder VBI
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 2-0061: tuner type not set
tuner 2-0061: tuner type not set
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
Danke für eure Hilfe
Wer kann mir helfen
Habe suse 10.2. IVTV-0.10.5
Und Firmware nch /lib/firrmware kopiert
nach aufruf /sbin/modeProbe tuner kommt Fehler
Modul Tuner ist nicht vorhanden.
was ist mit meinen Encoder wie kann ich die richtige Firmware laden
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.0 (tagged release) loading
ivtv: Linux version: 2.6.18.8-0.1-default SMP mod_unload 586 REGPARM gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
PCI: Enabling device 0000:01:09.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 209
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
tveeprom 2-0050: Hauppauge model 48139, rev K2B7, serial# 9927729
tveeprom 2-0050: tuner model is Philips FM1216ME MK5 (idx 117, type 4)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 2-0050: audio processor is MSP4418 (idx 25)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has radio, has IR remote
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect
ivtv0: Encoder revision: 0x02060039
ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011, 0x02040024 or 0x02050032.
ivtv0: Decoder revision: 0x02020023
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG
ivtv0: Registered device vbi8 for decoder VBI
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 2-0061: tuner type not set
tuner 2-0061: tuner type not set
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
Danke für eure Hilfe