(gelöst) fehler beim erstellen einer dvd mit mandvd

--> Lancement de l'encodage des fichiers ------------------------------------------------------------
ln: Erzeuge symbolische Verknüpfung „/windows/D/01video/02videos/04mandvd/gibvideo0.mpg“: Die Operation ist nicht erlaubt
--> Lancement de la génération du menu ------------------------------------------------------------
1920+0 Datensätze ein
1920+0 Datensätze aus
7680 Bytes (7,7 kB) kopiert
, 0,0062525 s, 1,2 MB/s
Assuming raw pcm input file

LAME
3.97 32bits (http://www.mp3dev.org/)
Using polyphase lowpass filter, transition band: 16452 Hz - 17032 Hz
Encoding /dev/stdin to silent.mpa
Encoding as 48 kHz 128 kbps j-stereo MPEG-1 Layer III (12x) qval=3

Frame | CPU time/estim | REAL time/estim | play/CPU | ETA
0/ ( 0%)| 0:00/ : | 0:00/ : | x| :
00:00--------------------------------------------------------------------------[K
kbps % %[K
0.0 [K
[A[A[A
0/2 ( 0%)| 0:00/ 0:00| 0:00/ 0:00| 0.0000x| 0:00

00:00--------------------------------------------------------------------------[K
kbps % %[K
0.0 [K
[A[A[A
4/4 (100%)| 0:00/ 0:00| 0:00/ 0:00| 4.8000x| 0:00

-------------------------------------------------------------------------------[K
kbps MS % long %[K
128.0 100.0 100.0[K

INFO: [ppmtoy4m] Command-line Parameters:
INFO: [ppmtoy4m] framerate: 25:1
INFO: [ppmtoy4m] pixel aspect ratio: 59:54
INFO: [ppmtoy4m] pixel packing: RGB
INFO: [ppmtoy4m] interlace: top-field-first (interleaved PPM input)
INFO: [ppmtoy4m] starting frame: 0
INFO: [ppmtoy4m] # of frames: 1, or until input exhausted
INFO: [ppmtoy4m] chroma subsampling: 4:2:0 MPEG-2 (horiz. cositing)
INFO: [mpeg2enc] SETTING EXTENDED MMX for MOTION!
INFO: [mpeg2enc] SETTING SSE and MMX for TRANSFORM!
INFO: [mpeg2enc] SETTING EXTENDED MMX for PREDICTION!
jpegtopnm:
WRITING PPM FILE

INFO: [ppmtoy4m] Output Stream parameters:
INFO: [ppmtoy4m] frame size: 720x576 pixels (622080 bytes)
INFO: [ppmtoy4m] chroma: 4:2:0 MPEG-2 (horiz. cositing)
INFO: [ppmtoy4m] frame rate: 25/1 fps (~25.000000)
INFO: [ppmtoy4m] interlace: top-field-first
INFO: [ppmtoy4m] sample aspect ratio: 59:54
INFO: [mpeg2enc] Selecting DVD output profile
INFO: [mpeg2enc] Interlaced input - selecting interlaced encoding.
INFO: [mpeg2enc] Encoding MPEG-2 video to genmenu.m2v
INFO: [mpeg2enc] Horizontal size: 720 pel
INFO: [mpeg2enc] Vertical size: 576 pel
INFO: [mpeg2enc] Aspect ratio code: 2 = 4:3 display
INFO: [mpeg2enc] Frame rate code: 3 = 25.0 (PAL/SECAM VIDEO / converted FILM)
INFO: [mpeg2enc] Bitrate: 7500 KBit/s
INFO: [mpeg2enc] Quality factor: 8 (Quantisation = 9) (1=best, 31=worst)
INFO: [mpeg2enc] Field order for input: top-field-first
INFO: [mpeg2enc] Sequence unlimited length
INFO: [mpeg2enc] Search radius: 16
INFO: [mpeg2enc] DualPrime: no
INFO: [mpeg2enc] Using one-pass rate controller
INFO: [mpeg2enc] GOP SIZE RANGE 9 TO 15
INFO: [mpeg2enc] Setting colour/gamma parameters to "PAL B/G"
INFO: [mpeg2enc] Progressive format frames = 0
INFO: [mpeg2enc] Using default unmodified quantization matrices
INFO: [mpeg2enc] Buffering 33 frames
INFO: [mpeg2enc] Signaling last frame = 0
INFO: [mpeg2enc] SETTING MMX and MMX for QUANTIZER!
INFO: [mpeg2enc] NEW GOP INIT length 15
INFO: [mpeg2enc] Frame 0 0 I q=8.00 sum act=15.05781
INFO: [mpeg2enc] Sequence end inserted
INFO: [mpeg2enc] Guesstimated final muxed size = 10867

INFO: [mplex] mplex version 1.8.0 (2.2.4 $Date: 2005/08/28 17:50:54 $)
INFO: [mplex] File genmenu.m2v looks like an MPEG Video stream.
INFO: [mplex] File silent.mpa looks like an MPEG Audio stream.
INFO: [mplex] Video stream 0: profile 8 selected - ignoring non-standard options!
INFO: [mplex] Found 1 audio streams and 1 video streams
INFO: [mplex] Selecting dvdauthor DVD output profile
INFO: [mplex] Multiplexing video program stream!
INFO: [mplex] Scanning for header info: Video stream e0 (genmenu.m2v)
INFO: [mplex] VIDEO STREAM: e0
INFO: [mplex] Frame width : 720
INFO: [mplex] Frame height : 576
INFO: [mplex] Aspect ratio : 4:3 display
INFO: [mplex] Picture rate : 25.000 frames/sec
INFO: [mplex] Bit rate : 7500000 bits/sec
INFO: [mplex] Vbv buffer size : 229376 bytes
INFO: [mplex] CSPF : 0
INFO: [mplex] Scanning for header info: Audio stream c0 (silent.mpa)
INFO: [mplex] MPEG AUDIO STREAM: c0
INFO: [mplex] Audio version : 1.0
INFO: [mplex] Layer : 3
INFO: [mplex] CRC checksums : no
INFO: [mplex] Bit rate : 16384 bytes/sec (128 kbit/sec)
INFO: [mplex] Frequency : 48000 Hz
INFO: [mplex] Mode : 1 joint stereo
INFO: [mplex] Mode extension : 2
INFO: [mplex] Copyright bit : 0 no copyright
INFO: [mplex] Original/Copy : 1 original
INFO: [mplex] Emphasis : 0 none
INFO: [mplex] SYSTEMS/PROGRAM stream:
INFO: [mplex] rough-guess multiplexed stream data rate : 7788744
INFO: [mplex] target data-rate specified : 10080000
INFO: [mplex] Setting specified specified data rate: 10080000
INFO: [mplex] Scanned to end AU 0
INFO: [mplex] Run-in Sectors = 89 Video delay = 13019 Audio delay = 16619
INFO: [mplex] New sequence commences...
INFO: [mplex] Video e0: buf= 0 frame=000000 sector=00000000
INFO: [mplex] Audio c0: buf= 0 frame=000000 sector=00000000
INFO: [mplex] STREAM e0 completed @ frame 0.
INFO: [mplex] STREAM c0 completed @ frame 4.
INFO: [mplex] Multiplex completion at SCR=1170.
INFO: [mplex] Video e0: buf= 10867 frame=000000 sector=00000006
INFO: [mplex] Audio c0: buf= 1920 frame=000004 sector=00000001
INFO: [mplex] VIDEO_STATISTICS: e0
INFO: [mplex] Video Stream length: 10867 bytes
INFO: [mplex] Sequence headers: 1
INFO: [mplex] Sequence ends : 1
INFO: [mplex] No. Pictures : 1
INFO: [mplex] No. Groups : 1
INFO: [mplex] No. I Frames : 1 avg. size 10867 bytes
INFO: [mplex] No. P Frames : 0 avg. size 0 bytes
INFO: [mplex] No. B Frames : 0 avg. size 0 bytes
INFO: [mplex] Average bit-rate : 2173200 bits/sec
INFO: [mplex] Peak bit-rate : 0 bits/sec
INFO: [mplex] BUFFERING stream too short for useful statistics
INFO: [mplex] AUDIO_STATISTICS: c0
INFO: [mplex] Audio stream length 1920 bytes.
INFO: [mplex] Syncwords : 5
INFO: [mplex] Frames : 5 padded
INFO: [mplex] Frames : 0 unpadded
INFO: [mplex] BUFFERING stream too short for useful statistics
INFO: [mplex] MUX STATUS: no under-runs detected.
DVDAuthor::spumux, version 0.6.13.
Build options: gnugetopt magick iconv freetype fribidi
Send bugs to <dvdauthor-users@lists.sourceforge.net>

INFO: Locale=de_DE.UTF-8
INFO: Converting filenames to UTF-8
STAT:
0:00:00.000
INFO: Picture survolee.png had 2 colors
INFO: Picture cliquee.png had 2 colors
INFO: Constructing blank img
INFO: Pickbuttongroups, success with 1 groups, useimg=1
INFO: After read_bmp(): xd=532 yd=268 x0=94 y0=124
INFO: Found EOF in .sub file.
INFO: Max_sub_size=578
WARN: Button y coordinates are odd for button 0: 94x112-266x143; they may not display properly.
WARN: Button y coordinates are odd for button 1: 464x378-625x409; they may not display properly.
INFO: Subtitle inserted at: 0.184656 sd=0
INFO: 1 subtitles added, 0 subtitles skipped, stream: 32, offset: 0.18

Statistics:
- Processed 0 subtitles.
- The longest display line had -1 characters.
- The maximum number of displayed lines was 0.
- The normal display height of the font arial.ttf was 0.
- The bottom display height of the font arial.ttf was 0.
- The biggest subtitle box had 578 bytes.
--> Lancement de DVD Author ------------------------------------------------------------
DVDAuthor::dvdauthor, version 0.6.13.
Build options: gnugetopt magick iconv freetype fribidi
Send bugs to <dvdauthor-users@lists.sourceforge.net>

INFO: Locale=de_DE.UTF-8
INFO: Converting filenames to UTF-8
INFO: dvdauthor creating VTS
STAT: Picking VTS 01

STAT: Processing /windows/D/01video/02videos/04mandvd/genmenu.mpg...

INFO: Video pts =
0.184
..
0.224

INFO: Audio[8] pts =
0.184
..
0.184

INFO: Audio[32] pts =
0.184
..
0.184

STAT: VOBU 1 at 0MB, 1 PGCS

INFO: Generating VTSM with the following video attributes:
INFO: MPEG version: mpeg2
INFO: TV standard: pal
INFO: Aspect ratio: 4:3
INFO: Resolution: 720x576
INFO: Audio ch 0 format: mp2/2ch, 48khz 20bps


STAT: Processing /windows/D/01video/02videos/04mandvd/gibvideo0.mpg...
ERR: Error opening /windows/D/01video/02videos/04mandvd/gibvideo0.mpg: Datei oder Verzeichnis nicht gefunden

Zum Vergrößern anklicken....

TomcatMJ schrieb:

...vieleicht die Ausgangsdateien bzw. das Zielverzeichnis mal auf funktionierende Linuxdateisysteme mit Symlink-Unterstützung umverlegen?

Zum Vergrößern anklicken....