Hallo,
ich kann mir k3b nicht brennen. Jedesmal gibt er mir folgende Fehlermeldung aus. Kommt sowohl bei audio als auch bei Daten.
Kann jemand helfen?
System
-----------------------
K3b Version: 1.0rc4
KDE Version: 3.5.5 "release 45.2"
QT Version: 3.3.7
Kernel: 2.6.18.2-34-default
Devices
-----------------------
E-IDE CD-ROM 52X/AKH A60 (/dev/hdd, ) [CD-Rom, DVD-Rom] [Fehler] [Keine]
HL-DT-ST DVDRAM GSA-4082B A201 (/dev/hdc, ) [CD-R, CD-RW, CD-Rom, DVD-Rom, DVD-R, DVD-RW, DVD+R, DVD+RW] [DVD-Rom, DVD-R Sequentiell, DVD-Ram, DVD-RW Eingeschränktes Überbrennen, DVD-RW Sequentiell, DVD+RW, DVD+R, CD-Rom, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überschreiben]
Used versions
-----------------------
mkisofs: 2.1.1a05+ck1,
cdrecord: 2.1.1a03
cdrecord
-----------------------
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel@lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
/usr/bin/cdrecord: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits./usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Warning: Cannot gain SYS_RAWIO capability: Operation not permitted
Possible reason: wodim not installed SUID root.
/usr/bin/cdrecord: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debburn project-0.8ubuntu1+debburn1'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4082B'
Revision : 'A201'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
Drive DMA Speed: 11418 kB/s 64x CD 8x DVD
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
Error: Cannot gain SYS_RAWIO capability, is wodim installed SUID root? Reason: Operation not permitted
Track 01: data 34 MB
Total size: 39 MB (03:56.40) = 17730 sectors
Lout start: 40 MB (03:58/30) = 17730 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
ATIP start of lead in: -11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 342119
Speed set to 4234 KB/s
Starting to write CD/DVD at speed 24.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 34 MB written.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 01 F0 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 10 34 10 04 80 09 01 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 1.763s timeout 40s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 1015808 bytes
Writing time: 21.412s
Average write speed 11.1x.
Fixating...
Fixating time: 0.005s
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=24 -tao driveropts=burnfree -eject -multi -xa -tsize=17728s -
mkisofs
-----------------------
17728
I: -input-charset not specified, using UTF-8 (detected in locale settings)
2.90% done, estimate finish Tue Jan 23 14:20:22 2007
5.70% done, estimate finish Tue Jan 23 14:20:05 2007
8.50% done, estimate finish Tue Jan 23 14:19:59 2007
11.31% done, estimate finish Tue Jan 23 14:19:56 2007
14.18% done, estimate finish Tue Jan 23 14:21:54 2007
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid Bayern August 2006 -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -abstract -copyright -biblio -volset-size 1 -volset-seqno 1 -sort /tmp/kde-pr/k3b0OYhBa.tmp -rational-rock -hide-list /tmp/kde-pr/k3bH540oa.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-pr/k3brpjDQb.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-pr/k3bVmrUoc.tmp
ich kann mir k3b nicht brennen. Jedesmal gibt er mir folgende Fehlermeldung aus. Kommt sowohl bei audio als auch bei Daten.
Kann jemand helfen?
System
-----------------------
K3b Version: 1.0rc4
KDE Version: 3.5.5 "release 45.2"
QT Version: 3.3.7
Kernel: 2.6.18.2-34-default
Devices
-----------------------
E-IDE CD-ROM 52X/AKH A60 (/dev/hdd, ) [CD-Rom, DVD-Rom] [Fehler] [Keine]
HL-DT-ST DVDRAM GSA-4082B A201 (/dev/hdc, ) [CD-R, CD-RW, CD-Rom, DVD-Rom, DVD-R, DVD-RW, DVD+R, DVD+RW] [DVD-Rom, DVD-R Sequentiell, DVD-Ram, DVD-RW Eingeschränktes Überbrennen, DVD-RW Sequentiell, DVD+RW, DVD+R, CD-Rom, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überschreiben]
Used versions
-----------------------
mkisofs: 2.1.1a05+ck1,
cdrecord: 2.1.1a03
cdrecord
-----------------------
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel@lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
/usr/bin/cdrecord: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits./usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Warning: Cannot gain SYS_RAWIO capability: Operation not permitted
Possible reason: wodim not installed SUID root.
/usr/bin/cdrecord: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debburn project-0.8ubuntu1+debburn1'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4082B'
Revision : 'A201'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x0010
Profile: 0x0009 (current)
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1204224 = 1176 KB
Drive DMA Speed: 11418 kB/s 64x CD 8x DVD
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
Error: Cannot gain SYS_RAWIO capability, is wodim installed SUID root? Reason: Operation not permitted
Track 01: data 34 MB
Total size: 39 MB (03:56.40) = 17730 sectors
Lout start: 40 MB (03:58/30) = 17730 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
ATIP start of lead in: -11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 342119
Speed set to 4234 KB/s
Starting to write CD/DVD at speed 24.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 34 MB written.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 01 F0 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 10 34 10 04 80 09 01 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 1.763s timeout 40s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 1015808 bytes
Writing time: 21.412s
Average write speed 11.1x.
Fixating...
Fixating time: 0.005s
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=24 -tao driveropts=burnfree -eject -multi -xa -tsize=17728s -
mkisofs
-----------------------
17728
I: -input-charset not specified, using UTF-8 (detected in locale settings)
2.90% done, estimate finish Tue Jan 23 14:20:22 2007
5.70% done, estimate finish Tue Jan 23 14:20:05 2007
8.50% done, estimate finish Tue Jan 23 14:19:59 2007
11.31% done, estimate finish Tue Jan 23 14:19:56 2007
14.18% done, estimate finish Tue Jan 23 14:21:54 2007
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid Bayern August 2006 -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -abstract -copyright -biblio -volset-size 1 -volset-seqno 1 -sort /tmp/kde-pr/k3b0OYhBa.tmp -rational-rock -hide-list /tmp/kde-pr/k3bH540oa.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-pr/k3brpjDQb.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-pr/k3bVmrUoc.tmp