• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Suse 9.1 liest keine CD´s/DVD´s

Hallo !!!

Ich verwende momentan Suse Linux 9.1 (Ja, ja ich weiß das es alt ist).
K3b-Version: 0.11.7 // KDE-Version: 3.2.1
Das Problem ist nun folgendes. Jedesmal wenn ich einen Rohling einlege und über "K3b" brennen will, bekomme ich Fehlermeldungen:

Wenn ich z.B. über das K3b-Hauptmenü auf den DVD-Brenner klicke kriege ich diese Meldung:

Ordner /media/dvdrecorder lässt sich nicht öffnen

Wenn ich versuche die DVD zu brennen, kommt nach einiger Zeit die Meldung das ich eine beschreibbare DVD einlegen soll. Die momentane DVD wäre "abgeschlossen". Ich benutze aber immer "DVD+RW". Außerdem war die DVD noch nicht beschrieben.

Wenn ich die DVD über die Konsole "mounte" bekomme ich folgende Meldung:

XXXXXXXX:/media/dvdrecorder> mount
/dev/hda2 on / type reiserfs (rw,acl,user_xattr)
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hdc on /media/dvdrecorder type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/fd0 on /media/floppy type subfs (rw,nosuid,nodev,sync,fs=floppyfss,procuid)
usbfs on /proc/bus/usb type usbfs (rw)

Ich habe schon den Befehl "dmesg" eingegeben. Ich habe allerdings von den Angezeigten Daten keine Ahnung und wollte fragen ob jemand von euch mir weiterhelfen kann. Hier erstmal die Daten.

XXXXXXXX:/media/dvdrecorder> dmesg
7 02:08:30 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
757MB vmalloc/ioremap area available.
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.1 present.
ACPI disabled because your bios is from 00 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: root=/dev/hda2 vga=0x31a desktop resume=/dev/hda1 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
CKRM Initialized
Detected 501.137 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 254960k/262080k available (1969k kernel code, 6384k reserved, 677k data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 987.13 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
Failure registering capabilities with the kernel
selinux_register_security: Registering secondary module capability
Capability LSM initialized
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Looking for DSDT in initrd ...No customized DSDT found in initrd!
Freeing initrd memory: 1118k freed
CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000
CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
do_initcalls
init_elf_binfmt
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
... the first call_usermodehelper: pci_bus
PCI: Using IRQ router VIA [1106/0596] at 0000:00:07.0
vesafb: framebuffer at 0xd8000000, mapped to 0xd0800000, size 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=24
vesafb: protected mode interface info at c000:5282
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Initial HugeTLB pages allocated: 0
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
SELinux: Registering netfilter hooks
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 50023 bytes, found (1280x1024, 23357 bytes, v3).
Console: switching to colour frame buffer device 147x55
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALLlct20 40, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: PHILIPS DVDR1640P, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/418KiB Cache, CHS=65535/16/63
hda: hda1 hda2
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
Resume Machine: resuming from /dev/hda1
Resuming from device hda1
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
Adding 512024k swap on /dev/hda1. Priority:42 extents:1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
subfs 0.9
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 5 for device 0000:00:12.0
eth0: RealTek RTL8139 at 0xd184f000, 00:02:44:25:ac:e4, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139C'
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo MVP3 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xe0000000
eth0: link down
NET: Registered protocol family 17
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 10, io base 0000e400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.4-52-default uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using address 2
usb 1-2: Product: Inkjet color printer
usb 1-2: Manufacturer: Lexmark
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0017
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
PCI: Found IRQ 9 for device 0000:00:13.0
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03545c0(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device cf5dcc00(sit0)
powernow-k8: AMD Athlon 64 or AMD Opteron processor required
powernow: This module only works with AMD K7 CPUs
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
eth0: no IPv6 routers present
Non-volatile memory driver v1.2
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
SCSI subsystem initialized
st: Version 20040318, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
mtrr: 0xd8000000,0x4000000 overlaps existing 0xd8000000,0x1000000
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
Unable to identify CD-ROM format.
udf: registering filesystem
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:236:udf_read_tagged: location mismatch block 256, tag 0 != 256
UDF-fs DEBUG fs/udf/super.c:1336:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
subfs: unsuccessful attempt to mount media (256)
Unable to identify CD-ROM format.
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:236:udf_read_tagged: location mismatch block 256, tag 0 != 256
UDF-fs DEBUG fs/udf/super.c:1336:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
subfs: unsuccessful attempt to mount media (256)
Unable to identify CD-ROM format.
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:236:udf_read_tagged: location mismatch block 256, tag 0 != 256
UDF-fs DEBUG fs/udf/super.c:1336:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
subfs: unsuccessful attempt to mount media (256)
Unable to identify CD-ROM format.
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:236:udf_read_tagged: location mismatch block 256, tag 0 != 256
UDF-fs DEBUG fs/udf/super.c:1336:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
subfs: unsuccessful attempt to mount media (256)
Unable to identify CD-ROM format.
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:236:udf_read_tagged: location mismatch block 256, tag 0 != 256
UDF-fs DEBUG fs/udf/super.c:1336:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
subfs: unsuccessful attempt to mount media (256)
Unable to identify CD-ROM format.
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:236:udf_read_tagged: location mismatch block 256, tag 0 != 256
UDF-fs DEBUG fs/udf/super.c:1336:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
subfs: unsuccessful attempt to mount media (256)
Unable to identify CD-ROM format.
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:236:udf_read_tagged: location mismatch block 256, tag 0 != 256
UDF-fs DEBUG fs/udf/super.c:1336:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
subfs: unsuccessful attempt to mount media (256)
Unable to identify CD-ROM format.
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:236:udf_read_tagged: location mismatch block 256, tag 0 != 256
UDF-fs DEBUG fs/udf/super.c:1336:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
subfs: unsuccessful attempt to mount media (256)
Unable to identify CD-ROM format.
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte 32768. Assuming open disc. Skipping validity check
UDF-fs DEBUG fs/udf/misc.c:236:udf_read_tagged: location mismatch block 256, tag 0 != 256
UDF-fs DEBUG fs/udf/super.c:1336:udf_load_partition: No Anchor block found
UDF-fs: No partition found (1)
subfs: unsuccessful attempt to mount media (256)

Bei allen Befehlen hatte ich einen Rohling eingelegt.
 

K4m1K4tz3

Advanced Hacker
Unmounte mal das DVD Laufwerk bevor du K3B startest.

Das würde ich zumindestens als "Fortgeschrittener Anfänger" probieren. :lol:
 

Asem

Newbie
Helmpflicht99 schrieb:
Hat nicht geholfen.

Beim "unmounten" steht folgendes:

XXXXXXX:/media/dvdrecorder> umount
Aufruf: umount [-hV]
umount -a [-f] [-r] [-n] [-v] [-t VFS-Typen] [-O optionen]
umount [-f] [-r] [-n] [-v] Spezialdatei | Verzeichnis ...

Liest du dir die Ausgaben der Programme eigentlich nie selber durch, bevor du sie im Forum postest? Da steht doch ziemlich klar (und sogar auf deutsch), wie umount aufzurufen ist, nämlich mit Angabe der Spezialdatei (in deinem Falle /dev/hdc) oder des Mount-Verzeichnisses (/media/dvdrecorder).

Und noch ein Tipp um der nächsten Anfrage vorzubeugen: Du solltest beim unmounten nicht im Verzeichnis drinstehen, das du ausbinden willst.

-- asem
 
OP
H

Helmpflicht99

Newbie
Ich habe die DVD "ausgebunden" und dann über K3B laden lassen.
Er konnte sie dann endlich lesen.

Als ich dann aber zum Brennen übergehen wollte kam diese Meldung:

Medium gefunden: kein Medium

Bitte ein leeres Medium (DVD +/- R(W)) in Laufwerk
Philips DVDR1640P (/dev/hdc)
einlegen.

Ich habe es auch mit anderen Rohlingen versucht. Es passierte aber immer das gleiche. Zur Errinerung: Ich benutze Octron DVD+RW Rohlinge.
 
Oben