• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

System erkennt keine CD-Rohlinge

S

Scuppa

Member
Hallo,

ich habe unter SuSE 10.1 das Problem, dass mein System keine CD-Rohlinge erkennt. Es wird im Arbeitsplatz kein leeres Medium angezeigt und auch k3b findet den Rohling nicht. Mein Brenner ist ein LG GSA-4163B IDE. Unter SuSE 10.0 lief mit den gleichen Rohlingen alles glatt, und auch beschriebene CDs werden problemlos erkannt. Ein Neustart von HAL bringt nichts. Mit einer Fehlermeldung kann ich leider nicht dienen, es wird ja nichts angezeigt...

Danke und Gruß,

Scuppa
 
OP
S

Scuppa

Member
Leider nein :(:

Code: 
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugs.opensuse.org/
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c  1.83 04/05/20 Copyright 1997 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4163B'
Revision       : 'A103'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
cdrecord: CD/DVD-Recorder not ready.
DVD-Rohlinge werden problemlos erkannt:

Code: 
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugs.opensuse.org/
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c  1.83 04/05/20 Copyright 1997 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4163B'
Revision       : 'A103'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: Found DVD+ media but DVD+R/DVD+RW support code is missing.
cdrecord: If you need DVD+R/DVD+RW support, ask the Author for cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
cdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found on this target.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc   CD-ROM driver (mmc_cd).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
 
J

jengelh

Guru
Nein, DVDs nimmt dein Programm auch nicht. Denn es müsste kommen (bei CD-R):
Code: 
.....blubb blafasel.....
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
DVD-R
Code: 
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags   : DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
book type:       DVD-R, Version 5 (2.5)
disc size:       120mm (0)
minimum rate:    Not specified (15)
number of layers:0
track path:      Parallel Track Path (0)
layer type:      Rewritable Area (2)
linear density:  0.267 µm/bit (0)
track density:   0.74 µm/track (0)
phys start:      196608
phys end:        2495103
end layer 0:     0
bca:             0
phys size:...    2298496
copyr prot type: 0
region mgt info: 0
application code:64
physical code:   193
last rec address:16621272
part v./ext code:5/2
ind wr. power:   133
wavelength code: 14
write str. code: 10 87 88 80
Manufacturer:   'SONY08D1'
rzone number:       1
border number:      1
damage:             0
reserved:           0 blank: 1 incremental: 0
nwa valid:          1
rzone start:        0
next wr addr:       0
free blocks:        2298496
blocking factor:    16
rzone size:         2298496
last recorded addr: 0
ATIP suche ich in deinem Pasting allerdings vergebens.
 
OP
S

Scuppa

Member
Wie es scheint, habe ich eine extrem schlechte Charge Rohlinge erwischt. Habe einige ausprobiert. Hier die Ausgabe von einer CD, die erkannt und in der Folge auch gebrannt wurde:

Code: 
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugs.opensuse.org/
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c  1.83 04/05/20 Copyright 1997 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4163B'
Revision       : 'A103'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.

Hatte mit dieser Sorte Rohlinge (Aldi) vorher nie Probleme. Kann man die Kompatibilität irgendwie erhöhen?! Hängt's vielleicht mit dem HAL-Daemon gegenüber früher fstab zusammen?

Gtx,

Scuppa
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben