• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

K3B-0.12.17-3.1 bricht nach 2 sec. ab!

Dino2004

Newbie
Hallo zusammen

Hab gestern SUSE 10.1 neuinstalliert und soweit eingerichtet.

SUSE 10.1
Kernel: 2.6.16.21-0.13-default
KDE: 3.5.4 release 62.1
K3B: k3b-0.12.17-3.1.pm.0 via Packman
K3B Einrichtungsassistent auch durchgeführt
ATI Graka über ATI YAST Quelle, 1 A alles IO inkl. 3D ^^

Wenn ich jetzt z.B. eine Daten CD Brennen möchte startet der Brennen
2 Sekunden und hört sofort wieder auf und sagt mir Fehler 255 ^^

Komisch ist das ich per Konsole alles brennen kann, egal ob mit
CDRECORD oder CDRDAO, es geht einwandfrei, nur nicht mit K3B und
das auch bei DVDs nicht.

Der Brenner HL-DT-ST DVDRAM GSA-4167B DL12 (/dev/sr0, /dev/sg0) ist über USB angeschlossen und wird daher als SCSI erkannt.

Kann mir da mal jemand ein Tipp geben wieso K3B da abbricht?

Gruß und Danke
DIno

Code:
System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.4 "release 62.1" 
QT Version:  3.3.6
Kernel:      2.6.16.21-0.13-default
Devices
-----------------------
NU DVDRW SDW-042 D363 (/dev/hdc, ) at  [CD-R; CD-RW; CD-Rom; DVD-Rom; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-Rom; DVD-R Sequentiell; DVD-RW Eingeschränktes Überbrennen; DVD-RW Sequentiell; DVD+RW; DVD+R; CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96R; RAW/R16; RAW/R96R; Eingeschränktes Überschreiben]

HL-DT-ST DVDRAM GSA-4167B DL12 (/dev/sr0, /dev/sg0) at  [CD-R; CD-RW; CD-Rom; DVD-Rom; DVD-Ram; DVD-R; DVD-RW; DVD-R doppelschichtig; DVD+R; DVD+RW; DVD+R doppelschichtig] [DVD-Rom; DVD-R Sequentiell; Zweischichtige DVD-R Sequentiell; Zweischicht-DVD-R Sprung; DVD-Ram; DVD-RW Eingeschränktes Überbrennen; DVD-RW Sequentiell; DVD+RW; DVD+R; DVD+R Doppelschicht; CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Eingeschränktes Überschreiben]
K3b
-----------------------
Size of filesystem calculated: 313431

Used versions
-----------------------
cdrecord: 2.1

cdrecord
-----------------------
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
/usr/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugs.opensuse.org/
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4167B'
Revision       : 'DL12'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0015 
Profile: 0x0016 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x002B 
Profile: 0x0010 
Profile: 0x0009 (current)
Profile: 0x000A 
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
FIFO size      : 4194304 = 4096 KB
/usr/bin/cdrecord: Cannot allocate memory. read buffer: scsi sendcmd: no error
CDB:  3C 00 00 00 00 00 00 FC 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
resid: 508
resid: 478
resid: 508
resid: 478
/usr/bin/cdrecord: Warning: controller returns zero sized CD write parameter page.
/usr/bin/cdrecord: Warning: controller returns wrong page 0 for CD write parameter page (5).
/usr/bin/cdrecord: Warning: controller returns zero sized CD write parameter page.
/usr/bin/cdrecord: Warning: controller returns wrong page 0 for CD write parameter page (5).
/usr/bin/cdrecord: Cannot init drive.
Track 01: data   612 MB        
Total size:      703 MB (69:39.10) = 313433 sectors
Lout start:      703 MB (69:41/08) = 313433 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  ATIP start of lead in:  -11933 (97:22/67)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 43
Manufacturer: Acer Media Technology, Inc.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=8 -tao driveropts=burnfree -eject -multi -xa -tsize=313431s - 

mkisofs
-----------------------
313431
INFO: UTF-8 character encoding detected by locale settings.
 Assuming UTF-8 encoded filenames on source filesystem,
 use -input-charset to override.
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 2048*1

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset  -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-dinobox/k3b5vSRdc.tmp -rational-rock -hide-list /tmp/kde-dinobox/k3bXh0Dca.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-dinobox/k3bUfFpsc.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-dinobox/k3bPEjKAb.tmp
 
OP
D

Dino2004

Newbie
Hi

Der Fehler 255 bedeutet " Unbekannter Fehler ",
ich sollte doch mal die Rohlinge tauschen
(x mal gemacht auch andere Hersteller#)
und langsammer brennen (auch cx mal getestet)


Gruß

Dino
 
Oben