Hallo,
bin Suse-Neuling. (Suse 10.0) Wollte mal probieren eine CD zu brennen. Und so weit ich das sehe, erkennt K3B auch die Geräte korrekt, doch wenn ich dann auf "brennen" klicke, erscheint die Statusanzeige, aber es tut sich nichts. Alle Balken bleiben bei 0% stehen.
Ich hänge mal die Ausgabe zur Fehlersuche mit ran. Falls jemand Rat weiß, bitte recht genau erklären, was ich tun könnte.
Danke
System
-----------------------
K3b Version: 0.12
KDE Version: 3.4.2 Level "b"
QT Version: 3.3.4
Kernel: 2.6.13-15-default
Devices
-----------------------
MSI CD-RW MS-8348 120D (/dev/hdc, ) at /media/cdrecorder [CD-R; CD-RW; CD-Rom] [CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]
HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdd, ) at /media/dvd [CD-Rom; DVD-Rom] [DVD-Rom; CD-Rom] [Keine]
K3b
-----------------------
Size of filesystem calculated: 54471
Used versions
-----------------------
mkisofs: 2.1
cdrecord: 2.1
cdrecord
-----------------------
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MSI '
Identifikation : 'CD-RW MS-8348 '
Revision : '120D'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1806336 = 1764 KB
Drive DMA Speed: 201600 kB/s 1145x CD 145x DVD
FIFO size : 4194304 = 4096 KB
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=48 -tao driveropts=burnfree -eject -multi -xa -tsize=54471s -
mkisofs
-----------------------
54471
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-maspiller/k3bXw4DAb.tmp -rational-rock -hide-list /tmp/kde-maspiller/k3b060glc.tmp -joliet -hide-joliet-list /tmp/kde-maspiller/k3bsr1Kjb.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-maspiller/k3bB9YTDb.tmp
bin Suse-Neuling. (Suse 10.0) Wollte mal probieren eine CD zu brennen. Und so weit ich das sehe, erkennt K3B auch die Geräte korrekt, doch wenn ich dann auf "brennen" klicke, erscheint die Statusanzeige, aber es tut sich nichts. Alle Balken bleiben bei 0% stehen.
Ich hänge mal die Ausgabe zur Fehlersuche mit ran. Falls jemand Rat weiß, bitte recht genau erklären, was ich tun könnte.
Danke
System
-----------------------
K3b Version: 0.12
KDE Version: 3.4.2 Level "b"
QT Version: 3.3.4
Kernel: 2.6.13-15-default
Devices
-----------------------
MSI CD-RW MS-8348 120D (/dev/hdc, ) at /media/cdrecorder [CD-R; CD-RW; CD-Rom] [CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]
HL-DT-ST DVD-ROM GDR8163B 0L23 (/dev/hdd, ) at /media/dvd [CD-Rom; DVD-Rom] [DVD-Rom; CD-Rom] [Keine]
K3b
-----------------------
Size of filesystem calculated: 54471
Used versions
-----------------------
mkisofs: 2.1
cdrecord: 2.1
cdrecord
-----------------------
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MSI '
Identifikation : 'CD-RW MS-8348 '
Revision : '120D'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1806336 = 1764 KB
Drive DMA Speed: 201600 kB/s 1145x CD 145x DVD
FIFO size : 4194304 = 4096 KB
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=48 -tao driveropts=burnfree -eject -multi -xa -tsize=54471s -
mkisofs
-----------------------
54471
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-maspiller/k3bXw4DAb.tmp -rational-rock -hide-list /tmp/kde-maspiller/k3b060glc.tmp -joliet -hide-joliet-list /tmp/kde-maspiller/k3bsr1Kjb.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-maspiller/k3bB9YTDb.tmp