• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] fehlende libs für kguitar

ich hab' das suse 10.0 (pc-welt) neu installiert und versuche nun seit vielen stunden das kguitar zu installieren. leider vergeblich.
auf dem 9.3 lief das programm völlig problemlos und hat sich auch ganz einfach über yast installieren lassen.
gegoogelt hab' ich schon und auch über 'suchen' hab ich nix gefunden.

probiert habe ich es über yast: no result
über synaptic: no result
über apt: no result

ein rpm hab' ich dann auf der HP von kguitar gefunden, runtergeladen und versucht zu installieren. leider ohne erfolg!

egal ob yast, synaptic oder apt, alle melden fehlende libs und wenn ich die libs dann versuche zu installieren, dann fehlen da auch wieder libs... us.w.

um über die shell hier noch das ein oder andere zu versuchen, reichen meine linux-kenntnisse leider noch nicht aus...

deshalb jetzt folgende fragen:

a) weiß jemand, auf welchem server ich das kompltte kguitar rpm für suse 10.0 finde?

b) gibt es eine mölichkeit irgendwo sämtliche libs runterzuladen?

c) weiß jemand noch links, wo ich infos dazu auf deutsch bekomme?

d) macht es evtl. sinn, mehrere packman-server zu listen, oder ist auf diesen mirrors überall das gleiche drauf?

vielen dank schon mal im voraus!
 
Super, jetzt wissen wir, dass Dir Bibliotheken fehlen, aber welche das sind, wissen wir leider nicht. Wie sollen wir sie denn finden, ohne die Namen zu kennen? Kopier die Fehlermeldungen doch bitte wortwörtlich 1:1, dann könnte vielleicht sogar jemand helfen.
 
OP
K

Kutscher58

Hacker
hi traffic,

ein bisschen weniger genervt würde auch nix schaden... ich hab' mir nun wirklich viel mühe gemacht, so viel infos wie möglich anzugeben. ich geb zu, nobody is perfect. auch ich nicht.
mir hätte es eigentlich schon gereicht, wenn jemand meine fragen beantwortet hätte, dann wäre ich wohl schon alleine weitergekommen.

trotzdem hier die meldung die ich bei apt bekommen habe:

linux:/home/ln/downloads # dir
insgesamt 6291
drwxr-xr-x 2 ln users 288 2005-12-15 04:14 .
drwxr-xr-x 26 ln users 1416 2005-12-15 15:30 ..
-rw-r--r-- 1 ln users 484202 2005-12-15 03:57 kguitar-0.5-alt1.i586.rpm
-rw-r--r-- 1 ln users 484067 2005-12-15 04:13 kguitar-1.5-alt1.i586.rpm
-rw-r--r-- 1 ln users 484067 2005-12-15 04:14 kguitar-2.5-alt1.i586.rpm
-rw-r--r-- 1 ln users 4614563 2005-12-15 04:05 libqt3-3.3.3-alt3.i586.rpm
-rw-r--r-- 1 ln users 352792 2005-12-15 04:09 libtse3-0.2.7-alt4.i586.rpm
linux:/home/ln/downloads # apt-get install kguitar-2.5-alt1.i586.rpm

Lese Paketlisten... Fertig
Erzeuge Abhängigkeitsbaum... Fertig
Selecting kguitar for 'kguitar-2.5-alt1.i586.rpm'
Einige Pakete konnten nicht installiert werden. Dies könnte bedeuten,
dass Sie eine unmögliche Situation angefordert haben oder, falls Sie die
instabile Distribution verwenden, dass einige benötigte Pakete noch nicht
erzeugt oder aus 'Incoming' verschoben worden sind.

Da Sie nur eine einzelne Operation angefordert haben, ist es extrem
wahrscheinlich, dass das Paket schlichtweg nicht installierbar ist und
ein Bugreport über dieses Paket eingereicht werden sollte.
Die folgende Information könnte helfen die Sitation zu beheben:

Die folgenden Pakete besitzen unerfülte Abhängigkeiten:
kguitar: Hängt ab von: kdelibs aber es ist nicht installierbar
Hängt ab von: libqt3 (>= 3.3.4-alt2) aber es ist nicht installierbar
Hängt ab von: libtse3 aber es ist nicht installierbar
Hängt ab von: libkdecore.so.4(CXX3) aber es ist nicht installierbar
Hängt ab von: libqt-mt.so.3(CXX3) aber es ist nicht installierbar
E: Fehlerhafte Pakete
linux:/home/ln/downloads #


gruß
kutscher58
 

konqui

Hacker
ein bisschen weniger genervt würde auch nix schaden...

ein bisschen mehr lesen auch nicht...

Die folgenden Pakete besitzen unerfülte Abhängigkeiten:
kguitar: Hängt ab von: kdelibs aber es ist nicht installierbar
Hängt ab von: libqt3 (>= 3.3.4-alt2) aber es ist nicht installierbar
Hängt ab von: libtse3 aber es ist nicht installierbar
Hängt ab von: libkdecore.so.4(CXX3) aber es ist nicht installierbar
Hängt ab von: libqt-mt.so.3(CXX3) aber es ist nicht installierbar
E: Fehlerhafte Pakete
 

Grothesk

Ultimate Guru
Auf der HP von kguitar gibt es doch ein src-rpm. Damit kannste das doch ganz easy selber bauen. Anleitung dazu findest du hier im LC
http://www.linux-club.de/viewtopic.php?t=19786&highlight=srpms
oder hier:
http://www.rpm.org/max-rpm/s1-rpm-miscellania-srpms.html
 
OP
K

Kutscher58

Hacker
Grothesk schrieb:
Auf der HP von kguitar gibt es doch ein src-rpm. Damit kannste das doch ganz easy selber bauen. Anleitung dazu findest du hier im LC
http://www.linux-club.de/viewtopic.php?t=19786&highlight=srpms
oder hier:
http://www.rpm.org/max-rpm/s1-rpm-miscellania-srpms.html


Also, ich hab' probiert und leider hat es nicht geklappt. Der letzte Versuch sah wie folgt aus:
***************************************************************************************
For more details about this problem, look at the end of config.log.
linux:/home/ln/downloads/kguitar/kguitar-0.5 # linux:/home/ln/downloads/kguitar/kguitar-0.5 # ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for kde-config... /opt/kde3/bin/kde-config
checking where to install... /opt/kde3 (as returned by kde-config)
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether g++ supports -Wmissing-format-attribute... yes
checking whether gcc supports -Wmissing-format-attribute... yes
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wnon-virtual-dtor... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fno-common... yes
checking whether g++ supports -fexceptions... yes
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -O0... yes
checking whether g++ supports --Wl,--warn-unresolved-symbols... no
not using lib directory suffix
checking for a sed that does not truncate output... /usr/bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/i586-suse-linux/bin/ld
checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
checking for /usr/i586-suse-linux/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/i586-suse-linux/bin/ld
checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dlopen... (cached) no
checking for dlopen in -ldl... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... (cached) yes
appending configuration tag "F77" to libtool
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... :
checking if C++ programs can be compiled... yes
checking for strlcat... no
checking if strlcat needs custom prototype... yes - in libkdefakes
checking for strlcpy... no
checking if strlcpy needs custom prototype... yes - in libkdefakes
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... yes
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking sys/bitypes.h usability... yes
checking sys/bitypes.h presence... yes
checking for sys/bitypes.h... yes
checking for poll in -lpoll... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking for res_init... yes
checking if res_init needs custom prototype... no
checking for killpg in -lucb... no
checking for int... yes
checking size of int... 4
checking for short... yes
checking size of short... 2
checking for long... yes
checking size of long... 4
checking for char *... yes
checking size of char *... 4
checking for dlopen in -ldl... (cached) yes
checking for shl_unload in -ldld... no
checking for size_t... yes
checking size of size_t... 4
checking for unsigned long... yes
checking size of unsigned long... 4
checking sizeof size_t == sizeof unsigned long... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for IceConnectionNumber in -lICE... yes
checking for libXext... yes
checking for pthread_create in -lpthread... yes
checking for extra includes... no
checking for extra libs... no
checking for libz... -lz
checking for libpng... -lpng -lz -lm
checking for libjpeg6b... no
checking for libjpeg... no
configure: WARNING: libjpeg not found. disable JPEG support.
checking for perl... /usr/bin/perl
checking for Qt... configure: error: Qt (>= Qt 3.3) (headers and libraries) not found. Please check your installation!
For more details about this problem, look at the end of config.log.
linux:/home/ln/downloads/kguitar/kguitar-0.5 #
**************************************************************



Ich hab' jetzt 2 Aussagen, der eine deutet an es geht nicht und der andere behauptet man könne sich das ganz easy selber bauen. Dazwischen steh ich jetzt und weiß gar nichts mehr...

Nach 2 Monaten googeln, Suchfunktionen, abklappern diverser Foren steck' ich jetzt keine Zeit mehr in ein Projekt, von dem ich nicht mal konkret weiß, ob es überhaupt lösbar ist. Ich werde eben temporär immer mal wieder auf w2k wechseln, um meine tabs auszudrucken.

Nutzen und aufgewendete Zeit stehen in keinem Verhältnis mehr, um sich Stück für Stück an die Lösung heranzuarbeiten. Das möchte ich weder mir, noch anderen zumuten.

Falls sich aber doch noch jemand findet, der genau dieses konkrete Problem kennt und auch eine Lösung weiß, dann würde ich mich über eine kurze Nachricht freuen...

Gruß vom
gefrusteten Kutscher
 

Grothesk

Ultimate Guru
configure: WARNING: libjpeg not found. disable JPEG support.
checking for perl... /usr/bin/perl
checking for Qt... configure: error: Qt (>= Qt 3.3) (headers and libraries) not found. Please check your installation!
Bedeutet, dass du zum selberkompilieren die sog. -devel-Files benötigst. In deinem Fall wohl 'qt3-devel' Die erwähnten Headers und libraries sind da enthalten. Und wo du gerade beim Installieren bist, installier auch noch 'libjpeg' nach. Dann sollte die Meldung zu JPEG auch wegfallen.
Versuchs einfach nochmal mit den passenden Entwicklerpaketen. Ich drück die Daumen!
 
OP
K

Kutscher58

Hacker
found. Please check your installation!Bedeutet, dass du zum selberkompilieren die sog. -devel-Files benötigst. In deinem Fall wohl 'qt3-devel' Die erwähnten Headers und libraries sind da enthalten. Und wo du gerade beim Installieren bist, installier auch noch 'libjpeg' nach. Dann sollte die Meldung zu JPEG auch wegfallen.
Versuchs einfach nochmal mit den passenden Entwicklerpaketen. Ich drück die Daumen!


Hab ich erledigt. Hat erst ganz gut ausgesehen, aber dann gab's doch noch folgende Fehlermeldung,
die ich versucht habe über ./configure --help zu lösen. Leider alles 'Böhmische Dörfer', aber ich glaub' ich bin nah dran...
Vielleicht noch 'nen kleinen Schubs?

***********************************************************************************
checking for Qt... libraries /usr/lib/qt3/lib, headers /usr/lib/qt3/include using -mt
checking for moc... /usr/lib/qt3/bin/moc
checking for uic... /usr/lib/qt3/bin/uic
checking whether uic supports -L ... yes
checking whether uic supports -nounload ... yes
checking if Qt needs -ljpeg... no
checking for rpath... yes
checking for KDE... configure: error:
in the prefix, you've chosen, are no KDE headers installed. This will fail.
So, check this please and use another prefix!
linux:/home/ln/downloads/kguitar/kguitar-0.5 # make
make: *** Keine Targets angegeben und keine »make«-Steuerdatei gefunden. Schluss.
linux:/home/ln/downloads/kguitar/kguitar-0.5 # ./make
bash: ./make: Datei oder Verzeichnis nicht gefunden
linux:/home/ln/downloads/kguitar/kguitar-0.5 # ./configure --help
`configure' configures this package to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..']

Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[the kde prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]

By default, `make install' will install all the files in
`the kde prefix/bin', `the kde prefix/lib' etc. You can specify
an installation prefix other than `the kde prefix' using `--prefix',
for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data [PREFIX/share]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--infodir=DIR info documentation [PREFIX/info]
--mandir=DIR man documentation [PREFIX/man]

Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names

System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
--target=TARGET configure for building compilers for TARGET [HOST]

Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--disable-fast-perl disable fast Makefile generation (needs perl)
--enable-debug=ARG enables debug symbols (yes|no|full) default=no
--disable-debug disables debug output and debug symbols default=no
--enable-strict compiles with strict compiler options (may not
work!)
--disable-warnings disables compilation with -Wall and similiar
--enable-profile creates profiling infos default=no
--disable-dependency-tracking Speeds up one-time builds
--enable-dependency-tracking Do not reject slow dependency extractors
--enable-pch enables precompiled header support (currently only
KCC) default=no
--enable-final build size optimized apps (experimental - needs lots
of memory)
--enable-closure delay template instantiation
--enable-nmcheck enable automatic namespace cleanness check
--enable-shared[=PKGS]
build shared libraries [default=yes]
--enable-static[=PKGS]
build static libraries [default=no]
--enable-libsuffix /lib directory suffix (64,32,none=default)
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-embedded link to Qt-embedded, don't use X
--enable-qtopia link to Qt-embedded, link to the Qtopia Environment
--enable-mac link to Qt/Mac (don't use X)
--disable-mt link to non-threaded Qt (deprecated)
--disable-threading disables threading even if libpthread found
--disable-rpath do not use the rpath feature of ld
--disable-path-check don't try to find out, where to install
--disable-midisupport Disable MIDI Support if TSE3 is found

Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-tags[=TAGS]
include additional configurations [automatic]
--with-extra-includes=DIR
adds non standard include paths
--with-extra-libs=DIR adds non standard library paths
--with-qt-dir=DIR where the root of Qt is installed
--with-qt-includes=DIR where the Qt includes are.
--with-qt-libraries=DIR where the Qt library is installed.
--without-arts build without aRts default=no
--with-tse3-includes=DIR tse3 headers in DIR
--with-tse3-libraries=DIR tse3 libraries in DIR
--with-tse3-dir=DIR tse3 uninstalled in DIR
--with-kgtabs Install kgtabs.tex support for MusiXTeX

Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
headers in a nonstandard directory <include dir>
CPP C preprocessor
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor
F77 Fortran 77 compiler command
FFLAGS Fortran 77 compiler flags

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

linux:/home/ln/downloads/kguitar/kguitar-0.5 #
*************************************************************************************

Gruß vom
Kutscher
 
OP
K

Kutscher58

Hacker
oddikurt schrieb:
I

PS: Die Ausgabe des configure Scripts ist eigentlich so schon lang genug, die brauchste nicht mehrfach reinstellen.


Du hast natürlich recht! Es ist halt doch schon spät und alte Männer gehören eigentlich schon ins Bett :wink:

Ich hab's editiert, damit's 'übersichtlicher' wird.

Gruß
Kutscher
 
Moin Kutscher58,

laut deiner Meldung findet er KDE bzw. die KDEheader nicht. Ich vermute das das Programm den Pfad zu KDE ins configure geschrieben haben möchte, da sich dieser bei SuSE von dem anderer Distributionen unterscheidet (/opt/kde3 müßte es sein)
 
OP
K

Kutscher58

Hacker
Geier0815 schrieb:
Moin Kutscher58,

laut deiner Meldung findet er KDE bzw. die KDEheader nicht. Ich vermute das das Programm den Pfad zu KDE ins configure geschrieben haben möchte, da sich dieser bei SuSE von dem anderer Distributionen unterscheidet (/opt/kde3 müßte es sein)

Für solche Fälle habe ich in einer Linux-Zeitschrift folgenden Befehl gefunden:
./configure --with-gtk-prefix=/opt/kde3

Ich habe allerdings nicht genau verstanden, was ich mit dem Befehl ausgelöst habe. Jedenfalls hab' ich's probiert und dann folgende Meldung bekommen (ich poste mal nur den Anfang und Schluß):

**********************************************************************
linux:/home/ln/downloads/kguitar/kguitar-0.5 # ./configure --with-gtk-prefix=/opt/kde3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
.
.
.checking if Qt needs -ljpeg... no
checking for rpath... yes
checking for KDE... configure: error:
in the prefix, you've chosen, are no KDE headers installed. This will fail.
So, check this please and use another prefix!
***********************************************************************

oder, was ich auch noch probiert habe ist:
***********************************************************************
linux:/home/ln/downloads/kguitar/kguitar-0.5 # ./configure --with-gtk-prefix=/opt/kde3/bin
checking build system type... i686-pc-linux-gnu
.
.
ecking for rpath... yes
checking for KDE... configure: error:
in the prefix, you've chosen, are no KDE headers installed. This will fail.
So, check this please and use another prefix!
*****************************************************************************

Woher weiß ich, wie der KDEheader heisst, damit ich ihn suchen kann?
Ist einer der beiden Befehle richtig, oder bin ich da auf einem Holzweg?

Gruß
Kutscher
 
OP
K

Kutscher58

Hacker
oddikurt schrieb:
Gebe das einmal so ein:
Code:
./configure --prefix=/opt/kde3


Es funktioniert!
vorher mußte ich aber noch folgende Installationen vornehmen:

kdebase3-devel, kdelibs3-devel, qt3-devel
dabei die fehlenden Abhängigkeiten ignorieren.

Dann Dein Lösungsvorschlag: ./configure --prefix=/opt/kde3

Dann 'make'
Dann 'make install'

und das wars!

Danke an alle, für die Hilfe zur Selbsthilfe!

Gruß
vom Kutscher
 

Grothesk

Ultimate Guru
Na dann herzlichen Glückwunsch!

Allerdings schrillen bei:
dabei die fehlenden Abhängigkeiten ignorieren.
bei mir wieder alle Alarmglocken...
Bist du sicher, das du die Abhängigkeiten einfach ignorieren darfst? Denn das ist eigentlich immer eine schlechte Idee...

Na wie dem auch sei... Hau in die Saiten!
 
OP
K

Kutscher58

Hacker
Grothesk schrieb:
Na dann herzlichen Glückwunsch!

Allerdings schrillen bei:
dabei die fehlenden Abhängigkeiten ignorieren.
bei mir wieder alle Alarmglocken...
Bist du sicher, das du die Abhängigkeiten einfach ignorieren darfst?

Also sicher bin ich mir bei Linux nie..., aber ich vermute mal, dass da 2 jeweils voneinander abhängig waren. Ich hab sie nämlich nochmal mit yast-install überprüft und da waren dann alle Abhängigkeiten gelöst.

Ich hoffe mal, dass ich mir da keinen Knoten reingebaut habe...

Gruß vom
Kutscher
 
OP
K

Kutscher58

Hacker
Für alle, die es noch interessiert:

Man kann das Teil mittlerweile super easy über apt/Synaptic installieren. Klappt einwandfrei!
 

oc2pus

Ultimate Guru
Kutscher58 schrieb:
Du kannst Dir nicht vorstellen, wie dankbar Dir die ganze in Linux wandelnde Gitarristengemeinde ist :!: :D

dann solltest du vielleicht auch einen Blick auf TuxGuitar und/oder GuitarCodexPlus werfen ...

beides als Paket in meinem bzw im packman Repository vorhanden .)
 
Oben